scholarly journals Monitoring rocky reef biodiversity by underwater geo-referenced photoquadrats

2021 ◽  
Vol 38 (1) ◽  
pp. 17-24
Author(s):  
Gonzalo Bravo ◽  
Juan Pablo Livore ◽  
Gregorio Bigatti
Keyword(s):  
Low Cost ◽  
Rocky Reef ◽  
Intelligence Analysis ◽  
High Definition ◽  
Sampling Protocol ◽  
Sampling Methodology ◽  
Rocky Reefs ◽  
Marine Habitats ◽  
Non Destructive ◽  
Excellent Tool

Digital images are an excellent tool for divers to sample hard-bottom subtidal habitats as bottom time is limited and high-definition images can be collected quickly and accurately. The present paper describes a sampling protocol for benthic rocky reef communities using geo-referenced photoquadrats and tests the method over several rocky reefs of Atlantic Patagonia. This method was tested in two localities, separated by 100 km in a semi-enclosed gulf, covering a total of 5800 m of 11 rocky reefs using track roaming transects. The protocol is non-destructive, relatively low-cost and can adequately assess changes in marine habitats as rocky reefs. The implementation of artificial intelligence analysis using human expert training may reduce analysis time and increase the amount of data collected. The present study recommends this sampling methodology for programs aimed at monitoring changes in biodiversity.

Costs and benefits of towed videos and remotely operated vehicles for sampling shallow reef habitats and fish

2020 ◽  
Vol 71 (8) ◽  
pp. 953 ◽  
Author(s):  
T. R. Davis ◽  
G. Cadiou ◽  
J. Williams ◽  
M. A. Coleman
Keyword(s):  
Fish Assemblages ◽  
Selection Process ◽  
Low Cost ◽  
Rocky Reef ◽  
Costs And Benefits ◽  
Remotely Operated Vehicles ◽  
Benthic Habitats ◽  
Comparative Performance ◽  
Shallow Reef ◽  
Marine Habitats

Where several different tools are available for research, the costs and benefits associated with each option become an important part of the selection process. Towed video (ToV) and remotely operated vehicles (ROVs) are both widely used to assess shallow reef benthic habitats and fish assemblages, but quantitative data on their comparative performance is limited. The relative abilities of commercially available ToV and ROV were assessed using two low-cost (less than A$10000), manually deployable systems. These systems were deployed to collect photographs of marine habitats and videos of fish assemblages along six 200-m transects at three separate sites. The time required to operate each system and the specific limitations and advantages of each system were compared. Both systems performed equally in terms of the resolution of data collected on benthic habitats and fish assemblages on shallow reefs. However, ToV required significantly less time (~60% less) to collect data than ROV, and should allow cost savings with no loss in data quality. We recommend ToV as a cost-effective and easily deployable system for assessing rocky reef habitats and fish assemblages.

scholarly journals Rocky reef biodiversity survey: Punta Pardelas, Argentina

2021 ◽  
Vol 9 ◽  
Author(s):  
Gonzalo Bravo ◽  
Juan Pablo Livore ◽  
Nicolás Battini ◽  
Marianela Gastaldi ◽  
Daniel Lauretta ◽  
...  
Keyword(s):  
Protected Area ◽  
Benthic Communities ◽  
Rocky Intertidal ◽  
Marine Biodiversity ◽  
Rocky Reef ◽  
High Definition ◽  
Form Complex ◽  
Biodiversity Survey ◽  
Rocky Reefs ◽  
Baseline Information

Temperate rocky reefs in the SW Atlantic are productive areas that support highly diverse communities of invertebrates, algae and fishes. Rocky outcrops form complex structures which offer a diversity of microhabitats that lead to a great variety of co-existing species. Subtidal biodiversity within the Natural Protected Area Península Valdés is largely unexplored and studies are mainly limited to fish. A total of 560 high definition photoquadrats from seven rocky reefs (1-25 m depth) at Punta Pardelas were obtained during March 2019. In total, 4491 occurrences were recorded and identified to phyla (n = 2), superclasses (n = 1), classes (n = 5), subclasses (n = 2), orders (n = 2), families (n = 1), subfamilies (n = 1), genera (n = 10) and species (n = 43) levels. This dataset was developed to provide a baseline inventory of Punta Pardelas inside the Natural Protected Area, that was only partially reported more than 50 years ago. Such data represent the first step towards monitoring these less-accessible ecosystems. Most of the available information about Atlantic Patagonian marine biodiversity is related to rocky intertidal communities or rocky reef fish communities. Despite having more than 4000 km of coastline, in the last 20 years only four studies have focused on subtidal benthic communities from shallow rocky reefs in Argentina (Genzano et al. 2011, Rechimont et al. 2013, Bravo et al. 2015, Bravo et al. 2020a). However, none of them described the epi-benthic community of different surface orientations on the rocky reefs. This dataset includes several surface orientations (i.e. horizontal, vertical, overhang and cave floor) and their microhabitats. We found almost double the number of taxa previously reported for the area. Through stratified sampling of different surface orientations, we recorded species that are often overlooked and thus registered as part of the existing biodiversity. For example, overhang surfaces in our study showed a unique assemblage and a great diversity of sponges. This work will be valuable as baseline information that is currently out of date in Nuevo Gulf rocky reefs.

scholarly journals The Importance of Surface Orientation in Biodiversity Monitoring Protocols: The Case of Patagonian Rocky Reefs

2020 ◽  
Vol 7 ◽  
Author(s):  
Gonzalo Bravo ◽  
Juan Pablo Livore ◽  
Gregorio Bigatti
Keyword(s):  
Species Richness ◽  
Ecosystem Services ◽  
Large Scale ◽  
Surface Orientation ◽  
Accurate Information ◽  
Rocky Reef ◽  
Biodiversity Monitoring ◽  
Rocky Reefs ◽  
Marine Habitats ◽  
Monitoring Protocols

Temperate rocky reefs in Atlantic Patagonia are productive areas that support a high diversity of invertebrates, algae, and fishes. Complex surface structures on rocky reefs offer a range of microhabitats, which in turn, lead to a broad variety of co-existing species. Despite their ecological importance and the ecosystem services they provide, Patagonian rocky reef habitats have received limited attention. Until now studies have not discerned nor consequently described the assemblages found on each of the different surface orientations, namely horizontal, vertical, overhang and cavefloor. During this study we developed a protocol for sampling different surface orientations on subtidal rocky reefs using georeferenced high-resolution photoquadrats. We described and compared the epibenthic assemblage of surface orientations on 7 rocky reefs within 1–25 m depth in a northern Patagonia gulf. A total of 70 taxa were identified (12 macroalgae, 44 invertebrates, 10 tunicates, and 4 fishes), which doubles the number of species previously reported for the area. Each surface orientation presented a different assemblage structure while species richness was higher on vertical surfaces. The overhang surfaces had the most distinct assemblage conformed by cnidarians, tunicates, sponges and the absence of algae. The average overall species richness increased with depth due to the increase of sponge and tunicate species. Our results highlight the need of including several surface orientations in rocky reef biodiversity monitoring. This study offers a protocol for large-scale programs aimed at monitoring changes in biodiversity, which is broadly accessible and will provide accurate information. With robust yet simple, non-destructive and relatively low-cost practices this protocol can adequately assess changes in marine habitats, which provide important ecosystem services.

Fault Localization of Power-Ground Short via Signal Injection and Oscilloscope Technique

2010 ◽  
Author(s):  
Binh Nguyen
Keyword(s):  
Low Cost ◽  
Short Circuit ◽  
Fault Localization ◽  
Fault Isolation ◽  
Test Apparatus ◽  
Good Working ◽  
Signal Injection ◽  
Set Up ◽  
Non Destructive ◽  
Short Circuit Condition

Abstract For those attempting fault isolation on computer motherboard power-ground short issues, the optimal technique should utilize existing test equipment available in the debug facility, requiring no specialty equipment as well as needing a minimum of training to use effectively. The test apparatus should be both easy to set up and easy to use. This article describes the signal injection and oscilloscope technique which meets the above requirements. The signal injection and oscilloscope technique is based on the application of Ohm's law in a short-circuit condition. Two experiments were conducted to prove the effectiveness of these techniques. Both experiments simulate a short-circuit condition on the VCC3 power rail of a good working PC motherboard and then apply the signal injection and oscilloscope technique to localize the short. The technique described is a simple, low cost and non-destructive method that helps to find the location of the power-ground short quickly and effectively.

scholarly journals The grades and freshness assessment of eggs based on density detection using machine vision and weighing sensor

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Supakorn Harnsoongnoen ◽  
Nuananong Jaroensuk
Keyword(s):  
Machine Vision ◽  
Vision System ◽  
Low Cost ◽  
Measuring System ◽  
Coefficient Of Determination ◽  
Water Displacement ◽  
Non Invasive ◽  
Future Potential ◽  
Non Destructive ◽  
Egg Freshness

AbstractThe water displacement and flotation are two of the most accurate and rapid methods for grading and assessing freshness of agricultural products based on density determination. However, these techniques are still not suitable for use in agricultural inspections of products such as eggs that absorb water which can be considered intrusive or destructive and can affect the result of measurements. Here we present a novel proposal for a method of non-destructive, non-invasive, low cost, simple and real—time monitoring of the grading and freshness assessment of eggs based on density detection using machine vision and a weighing sensor. This is the first proposal that divides egg freshness into intervals through density measurements. The machine vision system was developed for the measurement of external physical characteristics (length and breadth) of eggs for evaluating their volume. The weighing system was developed for the measurement of the weight of the egg. Egg weight and volume were used to calculate density for grading and egg freshness assessment. The proposed system could measure the weight, volume and density with an accuracy of 99.88%, 98.26% and 99.02%, respectively. The results showed that the weight and freshness of eggs stored at room temperature decreased with storage time. The relationship between density and percentage of freshness was linear for the all sizes of eggs, the coefficient of determination (R2) of 0.9982, 0.9999, 0.9996, 0.9996 and 0.9994 for classified egg size classified 0, 1, 2, 3 and 4, respectively. This study shows that egg freshness can be determined through density without using water to test for water displacement or egg flotation which has future potential as a measuring system important for the poultry industry.

scholarly journals A low-cost wireless endoscope camera: a preliminary report

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
J. M. Lazarus ◽  
M. Ncube
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Video Transmission ◽  
Low Cost ◽  
Battery Life ◽  
Resource Constrained ◽  
High Definition ◽  
Industry Standard ◽  
Constrained Environments ◽  
The Cost

Abstract Background Technology currently used for surgical endoscopy was developed and is manufactured in high-income economies. The cost of this equipment makes technology transfer to resource constrained environments difficult. We aimed to design an affordable wireless endoscope to aid visualisation during rigid endoscopy and minimally invasive surgery (MIS). The initial prototype aimed to replicate a 4-mm lens used in rigid cystoscopy. Methods Focus was placed on using open-source resources to develop the wireless endoscope to significantly lower the cost and make the device accessible for resource-constrained settings. An off the shelf miniature single-board computer module was used because of its low cost (US$10) and its ability to handle high-definition (720p) video. Open-source Linux software made monitor mode (“hotspot”) wireless video transmission possible. A 1280 × 720 pixel high-definition tube camera was used to generate the video signal. Video is transmitted to a standard laptop computer for display. Bench testing included latency of wireless digital video transmission. Comparison to industry standard wired cameras was made including weight and cost. The battery life was also assessed. Results In comparison with industry standard cystoscope lens, wired camera, video processing unit and light source, the prototype costs substantially less. (US$ 230 vs 28 000). The prototype is light weight (184 g), has no cables tethering and has acceptable battery life (of over 2 h, using a 1200 mAh battery). The camera transmits video wirelessly in near real time with only imperceptible latency of < 200 ms. Image quality is high definition at 30 frames per second. Colour rendering is good, and white balancing is possible. Limitations include the lack of a zoom. Conclusion The novel wireless endoscope camera described here offers equivalent high-definition video at a markedly reduced cost to contemporary industry wired units and could contribute to making minimally invasive surgery possible in resource-constrained environments.

scholarly journals Feasibility of Using VIS/NIR Spectroscopy and Multivariate Analysis for Pesticide Residue Detection in Tomatoes

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 196
Author(s):  
Araz Soltani Nazarloo ◽  
Vali Rasooli Sharabiani ◽  
Yousef Abbaspour Gilandeh ◽  
Ebrahim Taghinezhad ◽  
Mariusz Szymanek ◽  
...  
Keyword(s):  
Near Infrared ◽  
Cross Validation ◽  
Low Cost ◽  
Moving Average ◽  
Nir Spectroscopy ◽  
Control Treatment ◽  
Residue Detection ◽  
Non Destructive ◽  
Reflective Spectroscopy

The purpose of this work was to investigate the detection of the pesticide residual (profenofos) in tomatoes by using visible/near-infrared spectroscopy. Therefore, the experiments were performed on 180 tomato samples with different percentages of profenofos pesticide (higher and lower values than the maximum residual limit (MRL)) as compared to the control (no pesticide). VIS/near infrared (NIR) spectral data from pesticide solution and non-pesticide tomato samples (used as control treatment) impregnated with different concentrations of pesticide in the range of 400 to 1050 nm were recorded by a spectrometer. For classification of tomatoes with pesticide content at lower and higher levels of MRL as healthy and unhealthy samples, we used different spectral pre-processing methods with partial least squares discriminant analysis (PLS-DA) models. The Smoothing Moving Average pre-processing method with the standard error of cross validation (SECV) = 4.2767 was selected as the best model for this study. In addition, in the calibration and prediction sets, the percentages of total correctly classified samples were 90 and 91.66%, respectively. Therefore, it can be concluded that reflective spectroscopy (VIS/NIR) can be used as a non-destructive, low-cost, and rapid technique to control the health of tomatoes impregnated with profenofos pesticide.

scholarly journals High spatial resolution photo mosaicking for the monitoring of coralligenous reefs

Coral Reefs ◽  
2021 ◽  
Author(s):  
E. Casoli ◽  
D. Ventura ◽  
G. Mancini ◽  
D. S. Pace ◽  
A. Belluscio ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Low Cost ◽  
Pixel Resolution ◽  
Recording Apparatus ◽  
Assemblage Composition ◽  
Very High Spatial Resolution ◽  
Vertical Walls ◽  
Non Destructive ◽  
Very High

AbstractCoralligenous reefs are characterized by large bathymetric and spatial distribution, as well as heterogeneity; in shallow environments, they develop mainly on vertical and sub-vertical rocky walls. Mainly diver-based techniques are carried out to gain detailed information on such habitats. Here, we propose a non-destructive and multi-purpose photo mosaicking method to study and monitor coralligenous reefs developing on vertical walls. High-pixel resolution images using three different commercial cameras were acquired on a 10 m2 reef, to compare the effectiveness of photomosaic method to the traditional photoquadrats technique in quantifying the coralligenous assemblage. Results showed very high spatial resolution and accuracy among the photomosaic acquired with different cameras and no significant differences with photoquadrats in assessing the assemblage composition. Despite the large difference in costs of each recording apparatus, little differences emerged from the assemblage characterization: through the analysis of the three photomosaics twelve taxa/morphological categories covered 97–99% of the sampled surface. Photo mosaicking represents a low-cost method that minimizes the time spent underwater by divers and capable of providing new opportunities for further studies on shallow coralligenous reefs.

Sign in / Sign up

Export Citation Format

Share Document