Development of manufacturing technology of nanostructured ceramic choke

2020 ◽  
pp. 34-38
Author(s):  
K.B. Rustamova ◽  
◽  
V.M. Shamilov ◽  
I.A. Habibov ◽  
E.G. Hajiyev ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Gas Production ◽  
Oil Wells ◽  
Manufacturing Technology ◽  
The Other ◽  
Resistance Increase ◽  
Nanostructured Ceramic ◽  
Operational Life ◽  
Discharge Gas ◽  
Oil Gas

Currently, ceramic chokes are used for the adjustment of fluid discharge (gas) in the structures of production trees in oil wells of oil-gas production departments. The metals, plastic masses and other structural materials are used for the manufacturing. It was defined that compared to the other details of production tree the resource of these chokes are significantly less. For the increase of their operational life as the material the usage of nanostructured chokes, the manufacturing technology and the application results are offered. With the purpose of wear resistance increase of chokes, the manufacturing technology was improved and nanostructured chokes usage recommended. Nanostructured chokes were tested in 386 wells overall and showed high results.

scholarly journals Feeding Value Assessment of Substituting Cassava (Manihot esculenta) Residue for Concentrate of Dairy Cows Using an In Vitro Gas Test

Animals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 307
Author(s):  
Yuhui Zheng ◽  
Yanyan Zhao ◽  
Shenglin Xue ◽  
Wei Wang ◽  
Yajing Wang ◽  
...  
Keyword(s):  
Manihot Esculenta ◽  
Rumen Fluid ◽  
Gas Production ◽  
The Other ◽  
Holstein Cows ◽  
Value Assessment ◽  
Buffer Solution ◽  
Feeding Value ◽  
Cassava Residue

The feeding value of replacing concentrate with cassava (Manihot esculenta) residue in the feed of Holstein cows was confirmed using an in vitro gas test. The treatments consisted of 0% (control, CON), 5%, 10%, 15%, 20%, 25%, and 30% inclusion of cassava residue in fermentation culture medium composed of buffer solution (50 mL) and filtrated rumen fluid (25 mL). The parameters analyzed included the kinetics of gas production and fermentation indexes. Forty-eight hours later, there were no significant differences on in vitro dry matter disappearance (IVDMD), pH, and microbial crude protein (MCP) content among treatments (p > 0.05). However, the “cumulative gas production at 48 h” (GP48), the “asymptotic gas production” (A), and the “maximum gas production rate” (RmaxG) all increased linearly or quadratically (p < 0.01). The GP48 was significantly higher in the 25% treatment compared to the other treatments, except for the 30% (p < 0.01). The A was significantly larger in the 25% treatment compared to the other treatments, except for the 20% and 30% (p < 0.01). The RmaxG was distinctly larger in the 25% treatment compared to other treatments (p < 0.01); moreover, the “time at which RmaxG is reached” (TRmaxG) and the “time at which the maximum rate of substrate degradation is reached” (TRmaxS) were significantly higher in the 25% treatment than the CON, 20%, and 30% treatments (p < 0.01). Additionally, the content of ammonia-N (NH3-N) in all treatments showed linearly and quadratically decreases (p < 0.01), whereas total volatile fatty acid (VFA), iso-butyrate, butyrate, and iso-valerate contents changed quadratically (p = 0.02, p = 0.05, p = 0.01, and p = 0.02, respectively); all of these values peaked in the 25% treatment. In summary, the 25% treatment was associated with more in vitro gas and VFA production, indicating that this cassava residue inclusion level may be used to replace concentrate in the feed of Holstein cows. However, these results need to be verified in vivo.

An ESP Production Optimization Algorithm Applied to Unconventional Wells

2021 ◽  
Author(s):  
Fernando Bermudez ◽  
Noor Al Nahhas ◽  
Hafsa Yazdani ◽  
Michael LeTan ◽  
Mohammed Shono
Keyword(s):  
Gas Production ◽  
Oil Wells ◽  
Production Optimization ◽  
Operating Conditions ◽  
Tight Oil ◽  
Daily Production ◽  
Free Gas ◽  
Maximum Production ◽  
Electrical Submersible Pumps ◽  
High Production

Abstract The objectives and Scope is to evaluate the feasibility of a Production Maximization algorithm for ESPs on unconventional wells using projected operating conditions instead of current ones, which authors expect will be crucial in adjusting the well deliverability to optimum frequencies on the rapidly changing conditions of tight oil wells. Actual production data for an unconventional well was used, covering from the start of Natural Flow production up to 120 days afterwards. Simulating what the production would be if a VFD running on IMP Optimization algorithms had been installed, new values for well flowing pressures were calculated, daily production scenarios were evaluated, and recommended operating frequencies were plotted. Result, observations, and conclusions: A. Using the Intelligent Maximum Production (IMP) algorithm allows maximum production from tight oil wells during the initial high production stage, and the prevention of gas-locking at later stages when gas production increases. B. The adjustment of frequency at later stages for GOR wells is key to maintaining maximum production while controlling free gas at the intake when compared against controlling the surface choke. Novel/additive information: The use of Electrical Submersible Pumps for the production of unconventional wells paired with the use of a VFD and properly designed control algorithms allows faster recovery of investment by pumping maximum allowable daily rates while constraining detrimental conditions such as free gas at the intake.

Simulation of Multiliquid-Layer Sloshing With Vessel Motion by Using Moving Particle Semi-Implicit Method

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Kyung Sung Kim ◽  
Moo-Hyun Kim ◽  
Jong-Chun Park
Keyword(s):  
Gas Production ◽  
Particle Simulation ◽  
Small Scale ◽  
Linear Potential ◽  
Operational Effectiveness ◽  
Mps Method ◽  
Moving Particle ◽  
Vessel Motion ◽  
Linear Potential Theory ◽  
Oil Gas

For oil/gas production/processing platforms, multiple liquid layers can exist and their respective sloshing motions can also affect operational effectiveness or platform performance. To numerically simulate those problems, a new multiliquid moving particle simulation (MPS) method is developed. In particular, to better simulate the relevant physics, robust self-buoyancy model, interface searching model, and surface-tension model are developed. The developed multiliquid MPS method is validated by comparisons against experiment in which three-liquid-sloshing experiment and the corresponding linear potential theory are given. The validated multiliquid MPS program is subsequently coupled with a vessel-motion program in time domain to investigate their dynamic-coupling effects. In case of multiple liquid layers, there exists a variety of sloshing natural frequencies for respective interfaces, so the relevant physics can be much more complicated compared with the single-liquid-tank case. The simulation program can also reproduce the detailed small-scale interface phenomenon called Kelvin–Helmholtz instability. The numerical simulations also show that properly designed liquid cargo tank can also function as a beneficial antirolling device.

scholarly journals Sliding Wear Performance of AlCrN Coating on TiB2/Ti Composites at High Temperatures

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6771
Author(s):  
Remigiusz Michalczewski ◽  
Marek Kalbarczyk ◽  
Zbigniew Słomka ◽  
Edyta Osuch-Słomka ◽  
Maciej Łuszcz ◽  
...  
Keyword(s):  
Wear Resistance ◽  
High Temperatures ◽  
Surface Oxidation ◽  
Manufacturing Technology ◽  
Tribological Behaviour ◽  
Composite Surface ◽  
Group Iii ◽  
High Adhesion ◽  
Group I ◽  
Coating Composite

The aim of the study was to investigate effect of Ti/TiB2 composite composition and manufacturing technology parameters on the tribological behaviour of AlCrN coating-composite system. The AlCrN coating was deposited by PVD (Physical Vapour Deposition) method. The composites were manufactured by spark plasma sintering (SPS) from three variants of powders mixtures: Ti with TiB2, Ti6Al4V with TiB2 as well as Ti with B, using (five) different sintering temperatures. For each of the developed coating-composite systems, the wear resistance was evaluated using ball-on-disc SRV tester, at six temperatures (from room temperature up to 900 °C). The results confirmed that high-temperature wear resistance of the coating–substrate combination depends on Ti/TiB2 composite composition and manufacturing technology parameters. In the case of uncoated composite, two processes manage the wear at high temperatures: cracking propagation and surface oxidation. The presence of AlCrN coating on the composite surface protects the surface against deep cracking and surface oxidation. The composites of Group I, sintered at 1250 °C from a mixture of pure Ti and TiB2 (50/50 wt.% ratio) as well as Group III, sintered at 1350 °C from a mixture of pure Ti and B allow the achievement of a satisfactory surface quality, a high adhesion of the PVD coating and moderate wear at high temperatures. However, the composite made of pure Ti and B seems to be a better solution for temperatures exceeding 600 °C.

scholarly journals Subsurface Hybrid Power Options for Oil & Gas Production at Deep Ocean Sites

2010 ◽  
Author(s):  
J Farmer ◽  
R Haut ◽  
G Jahn ◽  
J Goldman ◽  
J Colvin ◽  
...  
Keyword(s):  
Deep Ocean ◽  
Gas Production ◽  
Hybrid Power ◽  
Oil Gas

scholarly journals Radioactive and Non-Radioactive Element Analysis of Dorado Gas Discovery of Sri Lanka and Their Influence on Natural Environment

2018 ◽  
Vol 8 (1) ◽  
Author(s):  
S.S.N. Gamage ◽  
R.M.T.S. Ratnayake ◽  
A.M.A.D.M. Senadhira ◽  
D.A. Weerasinghe ◽  
V.A. Waduge
Keyword(s):  
Sri Lanka ◽  
Gas Production ◽  
Gamma Ray Spectrometry ◽  
Published Data ◽  
Depth Range ◽  
Drilling Mud ◽  
Radioactive Elements ◽  
Drill Cuttings ◽  
The Earth ◽  
Oil Gas

Naturally-occurring radionuclides deposited beneath the earth, which are referred to as "NORM" and other toxicnon-radioactive elements transported to the earth surface with the oil and gas production. Hence, knowledge of the prevailing background levels of these elements in the subsurface reservoir formations is valuable to all stakeholders, most notably to regulatory authorities of the country. The drill cuttings obtained within depth range 3025m to 3095m of reservoir sand section in the deep water exploratory well (CLPL- Dorado 91 H/1z) drilled in the Mannar Basin offshore Sri Lanka were subjected to high-resolution Gamma-ray spectrometry and X-ray fluorescence (XRF) spectrometry.As test results revealed activity concentration of 40K varies from 0.338 Bq/g to 0.514 Bq/g, 210Pb from 0.007 Bq/g to 0.015 Bq/g, 226Ra from 0.012 Bq/g to 0.0145 Bq/g while 232Th levels are between 0.030 Bq/g to 0.040 Bq/g. According to the XRF testing levels of significantly hazardous non-radioactive elements are considerably lower, except for the level of the Barium. The Pb level varies between the 48 ppm to 22 ppm. The Thorium level varies between 9.6 ppm to 10.1 ppm. Manganese has a range of 5,173ppm to 653ppm.The barium levels are between 118,666 ppm to 24,400 ppm. NORM concentration of the tested section were on the lower side when results matched with the IAEA published data on NORM concentration in oil, gas and there byproducts and therefore there will be low level of NORM contaminations when the Dorado gas discovery proceeds to the production stage. Further there is no harmful public exposure from NORM by disposing these drill cuttings to environment or storing at any site location. But the disposal of the drilling mud and handling of the drilling mud should be conducted with cautious since extremely high Ba levels can potentially cause health problems.Keywords: NORM, drill-cuttings, oil, gas, Sri Lanka, XRF

Prevention of salt deposition in corrosive medium of produced water in oil-gas production

2021 ◽  
pp. 48-52
Author(s):  
F.G. Hasanov ◽  
◽  
A.M. Samedov ◽  
S.B. Bairamov ◽  
◽  
...  
Keyword(s):  
Closed System ◽  
Produced Water ◽  
Gas Production ◽  
Technological Equipment ◽  
Injection Wells ◽  
Salt Deposition ◽  
Water Salt ◽  
Salt Deposits ◽  
Experimental Researches ◽  
Oil Gas

Produced water isolated from the oil in oil-gas production is pumped into the injection wells after cleaning from salt deposits and mechanical impurities. In the mixture of high-mineralised produced water, salt deposits making the technological equipment and pipes useless while gathering and transportation, reduce the permeability of injection wells. Carried out experimental researches show that for each ton it is necessary to pump 100 g of KD-7 inhibitor to prevent salt deposition in the mixture of produced water. Technological processes should be performed in a closed system, and the territories contaminated with oil and produced water cleaned and equipped well.

Sign in / Sign up

Export Citation Format

Share Document