scholarly journals Stratigraphy and depositional evolution of the uppermost Oligocene –Miocene succession in western Denmark

2004 ◽  
Vol 51 ◽  
pp. 89-109 ◽  
Author(s):  
Erik Skovbjerg Rasmussen
Keyword(s):  
Sea Level ◽  
Middle Miocene ◽  
Depositional Environments ◽  
Sediment Supply ◽  
Coarse Grained ◽  
Sea Level Changes ◽  
Fluvial Systems ◽  
North East ◽  
The North ◽  
Tectonic Movements

The uppermost Oligocene – Miocene succession in Denmark is subdivided into six depositional sequences. The development of the succession was controlled both by tectonic movements and eustatic sea-level changes. Tectonic movements generated a topography, which influenced the depositional pattern especially during low sea level. This resulted in sediment by-pass on elevated areas and the confinement of fluvial systems to structural lows. Structural highs further created restricted depositional environments behind the highs during low sea level. The structural highs were also the locus for sandy spit deposits during transgression and high sea level. Initially sediment supply was from the north and north-east but shifted within the Middle Miocene to an easterly direction indicating a significant basin reorganisation at this time. Eustatic sea-level changes mainly controlledthe timing of sequence boundary development and the overall architecture of the sequences.Consequently, the most coarse-grained sediments were deposited within the forced regressive wedge systems tract, the lowstand systems tract and the early transgressive systems tract. The most distinct progradation occurred in the Aquitanian (Lower Miocene) and was associated with a cold period in central Europe.The subsequent rise of sea level until the Serravallian (Middle Miocene) resulted in an overall back-stepping stacking pattern of the sequences and in decreasing incision.

scholarly journals Clastic facies models, a personal perspective

2001 ◽  
Vol 48 ◽  
pp. 101-115
Author(s):  
Harold G. Reading
Keyword(s):  
Sea Level ◽  
Sequence Stratigraphy ◽  
Sedimentary Rocks ◽  
Sediment Supply ◽  
Personal Perspective ◽  
Sea Level Changes ◽  
Ancient Rock ◽  
Tectonic Movements ◽  
Over Time ◽  
Facies Models

Facies models evolved from classifications that were mainly descriptive, based on observable, measureable features such as the composition and texture of sedimentary rocks. As our understanding of sedimentary processes expanded, genetic facies models were developed based on the inferred process of formation. Since individual facies cannot be interpreted in isolation, they must be studied with reference to their neighbours, emphasizing the association of facies and sequences, in particular those that coarsen and fine upward. Environmental facies models are based on the interaction of studies on modern environments and ancient rock facies. Earlier facies models tended to invoke intrinsic, autocyclic controls. The advent of sequence stratigraphy led to greater emphasis on the surfaces that separate sequences and to external allocyclic controls. These were, initially, sea-level changes; later, changes in climate, tectonic movements and sediment supply were invoked. Over time, simple, all embracing models have given way to increasingly complex ones as our knowledge of the variability of nature has increased. Complex though these models are, they are only simplifications of reality. In nature there are no models and the majority of past environments differed in some respect from any modern environment. Each environment and rock sequence is unique.

scholarly journals Depositional environment of the Branch Sandstone and correlative sequences: Late Cretaceous changes in relative sea level in the East Coast Basin of New Zealand

2021 ◽  
Author(s):  
◽  
Lisa McCarthy
Keyword(s):  
Sea Level ◽  
East Coast ◽  
Depositional Environments ◽  
Passive Margin ◽  
Sea Level Changes ◽  
Relative Sea Level ◽  
Sea Level Fluctuations ◽  
The North ◽  
Tasman Sea ◽  
History Of

<p>The Branch Sandstone is located within an overall transgressive, marine sedimentary succession in Marlborough, on the East Coast of New Zealand’s South Island. It has previously been interpreted as an anomalous sedimentary unit that was inferred to indicate abrupt and dramatic shallowing. The development of a presumed short-lived regressive deposit was thought to reflect a change in relative sea level, which had significant implications for the geological history of the Marlborough region, and regionally for the East Coast Basin.  The distribution and lithology of Branch Sandstone is described in detail from outcrop studies at Branch Stream, and through the compilation of existing regional data. Two approximately correlative sections from the East Coast of the North Island (Tangaruhe Stream and Angora Stream) are also examined to provide regional context. Depositional environments were interpreted using sedimentology and palynology, and age control was developed from dinoflagellate biostratigraphy. Data derived from these methods were combined with the work of previous authors to establish depositional models for each section which were then interpreted in the context of relative sea level fluctuations.  At Branch Stream, Branch Sandstone is interpreted as a shelfal marine sandstone, that disconformably overlies Herring Formation. The Branch Sandstone is interpreted as a more distal deposit than uppermost Herring Formation, whilst the disconformity is suggested to have developed during a fall in relative sea level. At Branch Stream, higher frequency tectonic or eustatic sea-level changes can therefore be distinguished within a passive margin sedimentary sequence, where sedimentation broadly reflects subsidence following rifting of the Tasman Sea. Development of a long-lived disconformity at Tangaruhe Stream and deposition of sediment gravity flow deposits at Angora Stream occurred at similar times to the fall in relative sea level documented at the top of the Herring Formation at Branch Stream. These features may reflect a basin-wide relative sea-level event, that coincides with global records of eustatic sea level fall.</p>

scholarly journals Depositional environment of the Branch Sandstone and correlative sequences: Late Cretaceous changes in relative sea level in the East Coast Basin of New Zealand

2021 ◽  
Author(s):  
◽  
Lisa McCarthy
Keyword(s):  
Sea Level ◽  
East Coast ◽  
Depositional Environments ◽  
Passive Margin ◽  
Sea Level Changes ◽  
Relative Sea Level ◽  
Sea Level Fluctuations ◽  
The North ◽  
Tasman Sea ◽  
History Of

<p>The Branch Sandstone is located within an overall transgressive, marine sedimentary succession in Marlborough, on the East Coast of New Zealand’s South Island. It has previously been interpreted as an anomalous sedimentary unit that was inferred to indicate abrupt and dramatic shallowing. The development of a presumed short-lived regressive deposit was thought to reflect a change in relative sea level, which had significant implications for the geological history of the Marlborough region, and regionally for the East Coast Basin.  The distribution and lithology of Branch Sandstone is described in detail from outcrop studies at Branch Stream, and through the compilation of existing regional data. Two approximately correlative sections from the East Coast of the North Island (Tangaruhe Stream and Angora Stream) are also examined to provide regional context. Depositional environments were interpreted using sedimentology and palynology, and age control was developed from dinoflagellate biostratigraphy. Data derived from these methods were combined with the work of previous authors to establish depositional models for each section which were then interpreted in the context of relative sea level fluctuations.  At Branch Stream, Branch Sandstone is interpreted as a shelfal marine sandstone, that disconformably overlies Herring Formation. The Branch Sandstone is interpreted as a more distal deposit than uppermost Herring Formation, whilst the disconformity is suggested to have developed during a fall in relative sea level. At Branch Stream, higher frequency tectonic or eustatic sea-level changes can therefore be distinguished within a passive margin sedimentary sequence, where sedimentation broadly reflects subsidence following rifting of the Tasman Sea. Development of a long-lived disconformity at Tangaruhe Stream and deposition of sediment gravity flow deposits at Angora Stream occurred at similar times to the fall in relative sea level documented at the top of the Herring Formation at Branch Stream. These features may reflect a basin-wide relative sea-level event, that coincides with global records of eustatic sea level fall.</p>

scholarly journals Interdecadal Baroclinic Sea Level Changes in the North Pacific Based on Historical Ocean Hydrographic Observations

2015 ◽  
Vol 28 (11) ◽  
pp. 4585-4594 ◽  
Author(s):  
Tatsuo Suzuki ◽  
Masayoshi Ishii
Keyword(s):  
Sea Level ◽  
Wind Stress ◽  
North Pacific ◽  
Water Mass ◽  
Mass Density ◽  
Baroclinic Mode ◽  
Sea Level Changes ◽  
The North ◽  
Basin Scale ◽  
The North Pacific

Abstract Using historical ocean hydrographic observations, decadal to multidecadal sea level changes from 1951 to 2007 in the North Pacific were investigated focusing on vertical density structures. Hydrographically, the sea level changes could reflect the following: changes in the depth of the main pycnocline, density gradient changes across the pycnocline, and modification of the water mass density structure within the pycnocline. The first two processes are characterized as the first baroclinic mode. The changes in density stratification across the pycnocline are sufficiently small to maintain the vertical profile of the first baroclinic mode in this analysis period. Therefore, the first mode should represent mainly the dynamical response to the wind stress forcing. Meanwhile, changes in the composite of all modes of order greater than 1 (remaining baroclinic mode) can be attributed to water mass modifications above the pycnocline. The first baroclinic mode is associated with 40–60-yr fluctuations in the subtropical gyre and bidecadal fluctuations of the Kuroshio Extension (KE) in response to basin-scale wind stress changes. In addition to this, the remaining baroclinic mode exhibits strong variability around the recirculation region south of the KE and regions downstream of the KE, accompanied by 40–60-yr and bidecadal fluctuations, respectively. These fluctuations follow spinup/spindown of the subtropical gyre and meridional shifts of the KE shown in the first mode, respectively. A lag correlation analysis suggests that interdecadal sea level changes due to water mass density changes are a secondary consequence of changes in basin-scale wind stress forcing related to the ocean circulation changes associated with the first mode.

scholarly journals Naked oat is promising raw material for deep grain processing

2019 ◽  
Vol 20 (5) ◽  
pp. 447-455
Author(s):  
N. R. Andreev ◽  
V. G. Goldstein ◽  
L. P. Nosovskaya ◽  
L. V. Adikaeva ◽  
E. O. Golionko
Keyword(s):  
Agricultural Research ◽  
Starch Content ◽  
Raw Material ◽  
Coarse Grained ◽  
Cellulolytic Enzymes ◽  
Technological Parameters ◽  
Naked Oat ◽  
Grain Processing ◽  
North East ◽  
The North

During the research conducted at the All-Russian Research Institute for Starch Products there has been developed a technological mode of using cellulolytic enzymes to reduce the viscosity of grain pulp obtained by grinding naked oat grains soaked in a sodium metabisulphite solution. As the experimental data had been processed, the optimum technological parameters of the process were determined: the consumption of the enzyme preparation Viscoferm was 200 g/t of grain and the dura-tion of fermentation by constant stirring for 2.5 hours at pH 4.6 and temperature 50°C. Under laboratory conditions there has been studied the possibility of starch processing of naked oat grain samples Vyatka, Percheron, 857h05, 766 h05 varieties grown in the Federal Agricultural Research Center of the North-East named N.V. Rudnitsky. Technological assessment based on grain processing in the laboratory using the “plant on the table” method has shown that the yield of coarse-grained starch A in the processing of naked oat using cellulolytic enzymes is 51.4-53.9%, i.e. higher than that of filmy oats, rye Falenskaya 4 and Vyatka 2, wheat and triticale. Low starch content in fiber (7.7-8.7% dry substances DS of fiber) was found in comparison with the results obtained from the processing of filmy oats, Falenskaya and Vyatka 2 rye varieties, wheat and triticale (11.2 - 13.9% DS of fiber). Fiber output by the processing of naked oats is 7.3 - 8.8% DS of grain, by the processing of other types of grain 10.3 - 17.5% DS of grain. The yield of small-grain starch B in the processing of the studied varieties of naked oat is 19.2 - 20.8% DS of grain, that is higher than this value obtained by processing of filmy oats and wheat, but lower than by pro-cessing of rye and triticale. Isolated carbohydrate-protein concentrate, including starch B and proteins, is recommended for use with the extract and fiber as a component for the production of feed.

scholarly journals Reconstruction of the depositional sedimentary environment of Oligocene deposits (Qom Formation) in the Qom Basin (northern Tethyan seaway), Iran

Geologos ◽  
2020 ◽  
Vol 26 (2) ◽  
pp. 93-111
Author(s):  
Amrollah Safari ◽  
Hossein Ghanbarloo ◽  
Parisa Mansoury ◽  
Mehran Mohammadian Esfahani
Keyword(s):  
Sea Level ◽  
Sedimentary Environment ◽  
Depositional Environments ◽  
Sea Level Changes ◽  
Third Order ◽  
Depositional Sequences ◽  
Qom Formation ◽  
Tethyan Seaway ◽  
Qom Basin ◽  
Global Sea Level

AbstractDuring the Rupelian–Chattian, the Qom Basin (northern seaway basin) was located between the Paratethys in the north and the southern Tethyan seaway in the south. The Oligocene deposits (Qom Formation) in the Qom Basin have been interpreted for a reconstruction of environmental conditions during deposition, as well as of the influence of local fault activities and global sea level changes expressed within the basin. We have also investigated connections between the Qom Basin and adjacent basins. Seven microfacies types have been distinguished in the former. These microfacies formed within three major depositional environments, i.e., restricted lagoon, open lagoon and open marine. Strata of the Qom Formation are suggested to have been formed in an open-shelf system. In addition, the deepening and shallowing patterns noted within the microfacies suggest the presence of three third-order sequences in the Bijegan area and two third-order depositional sequences and an incomplete depositional sequence in the Naragh area. Our analysis suggests that, during the Rupelian and Chattian stages, the depositional sequences of the Qom Basin were influenced primarily by local tectonics, while global sea level changes had a greater impact on the southern Tethyan seaway and Paratethys basins. The depositional basins of the Tethyan seaway (southern Tethyan seaway, Paratethys Basin and Qom Basin) were probably related during the Burdigalian to Langhian and early Serravallian.

Clay mineral distribution related to rift activity, sea-level changes and paleoceanography in the Cretaceous of the Atlantic Ocean

Clay Minerals ◽  
1993 ◽  
Vol 28 (1) ◽  
pp. 61-84 ◽  
Author(s):  
M. Thiry ◽  
T. Jacquin
Keyword(s):  
Atlantic Ocean ◽  
Sea Level ◽  
Clay Minerals ◽  
Clay Mineral ◽  
Deep Sea ◽  
Depositional Environments ◽  
Sea Level Changes ◽  
Sea Floor ◽  
Deep Sea Sediments ◽  
Bottom Waters

AbstractThe distribution of clay minerals from the N and S Atlantic Cretaceous deep-sea sediments is related to rifting, sea-floor spreading, sea-level variations and paleoceanography. Four main clay mineral suites were identified: two are inherited and indicative of ocean geodynamics, whereas the others result from transformation and authigenesis and are diagnostic of Cretaceous oceanic depositional environments. Illite and chlorite, together with interstratified illite-smectite and smectite occur above the sea-floor basalts and illustrate the contribution of volcanoclastic materials of basaltic origin to the sediments. Kaolinite, with variable amounts of illite, chlorite, smectite and interstratified minerals, indicates detrital inputs from continents near the platform margins. Kaolinite decreases upward in the series due to open marine environments and basin deepening. It may increase in volume during specific time intervals corresponding to periods of falling sea-level during which overall facies regression and erosion of the surrounding platforms occurred. Smectite is the most abundant clay mineral in the Cretaceous deep-sea sediments. Smectite-rich deposits correlate with periods of relatively low sedimentation rates. As paleoweathering profiles and basal deposits at the bottom of Cretaceous transgressive formations are mostly kaolinitic, smectite cannot have been inherited from the continents. Smectite is therefore believed to have formed in the ocean by transformation and recrystallization of detrital materials during early diagenesis. Because of the slow rate of silicate reactions, transformation of clay minerals requires a long residence time of the particles at the water/sediment interface; this explains the relationships between the observed increases in smectite with long-term sea-level rises that tend to starve the basinal settings of sedimentation. Palygorskite, along with dolomite, is relatively common in the N and S Atlantic Cretaceous sediments. It is not detrital because correlative shelf deposits are devoid of palygorskite. Palygorskite is diagnostic of Mg-rich environments and is indicative of the warm and hypersaline bottom waters of the Cretaceous Atlantic ocean.

scholarly journals Origin of the Late Ordovician Lepidocyclus brachiopod fauna in North America and its biogeographic significance

1992 ◽  
Vol 6 ◽  
pp. 149-149
Author(s):  
Jisuo Jin
Keyword(s):  
North America ◽  
Sea Level ◽  
North American ◽  
Plate Tectonics ◽  
Late Ordovician ◽  
Sea Level Changes ◽  
Stepping Stones ◽  
Shell Size ◽  
Larval Stages ◽  
The North

Three rhynchonellid brachiopod genera, Hiscobeccus, Lepidocyclus, and Hypsiptycha, are the most diagnostic elements of the Lepidocyclus fauna of North America in Late Ordovician time. These are characterized by relatively large, strongly biconvex to globular shells with coarse imbricating growth lamellae and, internally, with septiform cardinal processes in brachial valves. Among the three genera, Hiscobeccus appears the earliest, now known from rocks of late Trentonian-Edenian age in the Canadian Rocky Mountains and Mackenzie Mountains. Morphologically, Hiscobeccus is distinguished from the other two genera by its open delthyrium in the pedicle valve. Early forms of Hiscobeccus show close morphological similarity to Rhynchotrema in their non-globular biconvex shells covered by strong growth lamellae only in the anterior portions. It has been suggested that Hiscobeccus evolved from the Rhynchotrema wisconsinense stock through increase in shell size, globosity, and strength of growth lamellae. Earliest species of Rhynchotrema has been documented convincingly from rocks of early Trentonian age, and the derivation of Hiscobeccus most likely took place during the mid-Trentonian. Lepidocyclus and Hypsiptycha evolved from either Rhynchotrema or Hiscobeccus by developing a pair of deltidial plates covering the delthyrium.Rhynchotrema and other rhynchonellids that evolved before mid-Trentonian time are common to the North American (Laurentian) and the Siberia-Kazakhstan paleocontinents. In contrast, Hiscobeccus, Lepidocyclus, and Hypsiptycha that evolved after the mid-Trentonian are virtually restricted to Laurentia. Therefore, Rhynchotrema marked the last successful intercontinental migration of rhynchonellids during their Llandeilian-Caradocian cosmopolitanism. The pronounced provincialism of the North American Lepidocyclus fauna may have been caused by a number of factors. Facies control is not likely the explanation because these rhynchonellids occur in nearly all the inland and marginal platform seas of Laurentia and commonly are found together in the same types of rocks. Plate tectonics and sea-level changes are considered major causes. The Ordovician rhynchonellids lived in shallow marine (intertidal-subtidal) environments and were incapable of crossing vast, deep oceanic barriers because of their sedentary mode of life and short-lived motile larval stages. The widening of the ocean between North America and Siberia, coupled with high sea-level stand, may have created a sufficiently wide oceanic barrier to interrupt faunal mixing between the two paleocontinents by late Trentonian time. Moreover, the rise in sea level would have resulted in the disappearance of island faunas, which could have served as stepping stones for intercontinental migration of shallow-water benthic faunas during low sea-level stand.

Sign in / Sign up

Export Citation Format

Share Document