scholarly journals Titanium dioxide modified with manganese: physicochemical and photocatalytic properties

2021 ◽  
Vol 12 (2-2021) ◽  
pp. 214-218
Author(s):  
S. A. Safaryan ◽  
◽  
M. L. Belikov ◽  
V. A. Krysanova ◽  
◽  
...  
Keyword(s):  
Methylene Blue ◽  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Phase Composition ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Organic Dyes ◽  
Photocatalytic Properties

The article presents the results of the studies of the physicochemical and photocatalytic properties of titanium dioxide modified with manganese, by the example of decomposition of organic dyes — ferroin and methylene blue. The correlations between the specific surface area and phase composition of the composites with their photocatalytic activity are revealed.

Bi2WO6 Nanoparticles Prepared by Combustion Synthesis with Different Fuels and their Photocatalytic Activity

2014 ◽  
Vol 604 ◽  
pp. 93-101
Author(s):  
Maris Kodols ◽  
Sabine Didrihsone ◽  
Janis Grabis
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Citric Acid ◽  
Ethylene Glycol ◽  
Specific Surface ◽  
Crystallite Size ◽  
Combustion Synthesis ◽  
Surface Area ◽  
Specific Surface Area ◽  
Solution Ph

The influence of glycine, glycerine, ethylene glycol and citric acid fuel and their ratio to NO3- on formation and dispersity of Bi2WO6 nanoparticles prepared by combustion synthesis has been studied. The pure crystalline Bi2WO6 with specific surface area 24,8 m2/g and crystallite size of 28 nm was obtained by using glycerine as fuel at its ratio to NO3- of 0,67. The photocatalytic activity of the prepared Bi2WO6 in degradation of methylene blue depended on its specific surface area of samples and solution pH.

Effect of Anatase/Rutile Phase Ratio on the Photodegradation of Methylene Blue under UV Irradiation

2020 ◽  
Vol 998 ◽  
pp. 78-83
Author(s):  
Yi Yi Zaw ◽  
Du Ang Dao Channei ◽  
Thotsaphon Threrujirapapong ◽  
Wilawan Khanitchaidecha ◽  
Auppatham Nakaruk
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Band Gap ◽  
Surface Area ◽  
Calcination Temperature ◽  
Organic Compounds ◽  
Specific Surface Area ◽  
Uv Irradiation ◽  
Rutile Phase

Titanium dioxide (TiO2) is known as one of the widely used catalysts in photocatalysis process. Recently, the photocatalysis of TiO2 has been implied in water purification and treatment, particularly dyes and organic compounds degradations. Naturally, the TiO2 can be found in three phases including anatase, rutile and brookite; each phase has its own specific properties such as grain size, stability and band gap energy. In this work, the effect of calcination temperature on the structure, morphology and photocatalytic activity were investigated. The data suggested that the anatase/rutile ratio of TiO2 can be controlled through the calcination process. The phase transformation data strongly indicated the liner function between percentage of rutile phase and calcination temperature. The BET analysis provided the consistent data with XRD patterns by showing that the specific surface area was decreased by increasing calcination temperature. The photodegradation of methylene blue under UV irradiation proved that the mixed phase of anatase/rutile ratio at 78.5/21.5 provided the highest photocatalytic activity. The phase composition ratio can influence the nanoparticles properties including band gap, specific surface area and energy band structure. Therefore, the control of anatase/rutile ratio was an alternative to enhance the photocatalytic activity of TiO2 nanoparticles for dyes and organic compounds degradations.

scholarly journals Combination of mesoporous titanium dioxide with MoS2 nanosheets for high photocatalytic activity

2017 ◽  
Vol 19 (2) ◽  
pp. 56-60 ◽  
Author(s):  
Loghman Karimi
Keyword(s):  
Electron Microscopy ◽  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Dye Degradation ◽  
Hydrothermal Process ◽  
Bet Analysis ◽  
Mesoporous Titanium Dioxide

Abstract This study presents a facile approach for the preparation of MoS2 nanosheet decorated by porous titanium dioxide with effective photocatalytic activity. Mesoporous titanium dioxide nanostructures first synthesized by a hydrothermal process using titanium (III) chloride and then the MoS2/TiO2 were prepared through mixing of MoS2 nanosheet with mesoporous titanium dioxide under ultrasonic irradiation. The synthesized nanocomposite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and Brunauer-Emmett-Teller (BET) analysis. The results showed that the nanocomposite has mesoporous structure with specific surface area of 176.4 m2/g and pore diameter of 20 nm. The as-prepared MoS2/TiO2 nanocomposites exhibited outstanding photocatalytic activity for dye degradation under sunlight irradiation, which could be attributed to synergistic effect between the molybdenum disulfide nanosheet and mesoporous titanium dioxide. The photocatalytic performance achieved is about 2.2 times higher than that of mesoporous TiO2 alone. It is believed that the extended light absorption ability and the large specific surface area of the 2D MoS2 nanosheets in the nanocomposite, leading to the enhanced photocatalytic degradation activity.

New Silica Supported Titanium Dioxide Catalysts: Characteristics and Photocatalytic Efficiency in Waste Water Depollution

2006 ◽  
Vol 61 (10) ◽  
pp. 1311-1318 ◽  
Author(s):  
Noureddine Kamil ◽  
Mohamed Khalid El Amrani ◽  
Najiba Benjelloun
Keyword(s):  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Calcination Temperature ◽  
Specific Surface Area ◽  
Inductively Coupled Plasma ◽  
Aqueous Suspension ◽  
Textile Dye ◽  
Photocatalytic Efficiency

Silica gel supported titanium dioxide photocatalysts were prepared by sintering TiO2/SiO2 mixtures under variations of TiO2 content, calcination temperature and calcination time. The method allowed to obtain catalyst samples, which can be used in aqueous suspension and which were found to be easily separated by decantation after the photocatalytic treatment. The photocatalytic efficiency of the catalysts was tested by carrying out the photooxidation of the textile dye Acid Red 88 (AR88) in aqueous solution, used as “model” water pollutant. The obtained photoefficiency results were correlated to catalyst physicochemical characteristics, as determined by Inductively Coupled Plasma (ICP) analysis, X-ray diffraction, specific surface area (BET) and scanning electron microscopy (SEM). No positive correlation has been observed between titanium dioxide content and photocatalytic efficiency. The decrease of photocatalytic activity at high calcination temperature (1000 °C) is attributed to the phase transition anatase/rutile as well as to the decreasing specific surface area. According to SEM analysis, no significant fixation of TiO2 on silica is observed for catalysts prepared at low temperature (400 °C). The observed photocatalytic activity is consequently due to free TiO2 particles. The best efficiency is observed for photocatalyst prepared at 800 °C and containing around fifty percent titanium dioxide.

scholarly journals Evaluation of the photocatalytic activity of concrete

2021 ◽  
Vol 6 (4) ◽  
pp. 13-20
Author(s):  
E. Krushel'nickaya
Keyword(s):  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Ultraviolet Radiation ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Concrete Surface ◽  
High Specific Surface Area ◽  
Foreign Manufacturer ◽  
Over Time

Based on the change in the color of an organic dye – rhodamine B, on the surface of concrete under the action of ultraviolet radiation, a theoretical and experimental assessment of the photocatalytic activity of concrete was carried out. Photocatalytic activity was calculated using the obtained coordinates of colorimetry L * a * b *. To assess the performance of the photocatalyst over time, a test was carried out with concrete samples at the age of 7 and 28 days. Titanium dioxide of three types of anatase modification of a foreign manufacturer was used as a photocatalyst in the study. It is shown that the introduction of titanium dioxide into concrete promotes self-cleaning of its surface. The values of discoloration of the dye on the concrete surface were obtained depending on its composition and on the time of exposure to ultraviolet radiation. It was determined that the value of the specific surface area of titanium dioxide affects the photocatalytic activity. It is noted that with the age of concrete samples, there is a noticeable decrease in phototransformation. It was also found that the high specific surface area of titanium dioxide allows it to exhibit its photocatalytic properties over time.

scholarly journals Photocatalytic activity of spectro-pure titanium dioxide: Effects of crystalline structure, specific surface area and sorption properties

2003 ◽  
Vol 5 (3) ◽  
pp. 159-166 ◽  
Author(s):  
Evgeny I. Kapinus ◽  
Tatyana A. Khalyavka ◽  
Valentina V. Shimanovskaya ◽  
Tatyana I. Viktorova ◽  
Vladimir V. Strelko
Keyword(s):  
Titanium Dioxide ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pure Titanium ◽  
Specific Rate ◽  
Two Phase ◽  
Photocatalytic Reactions ◽  
Optically Pure

Dispersed optically pure anatase, rutile and two-phase samples of titanium dioxide were prepared using a sol-gel technique. In particle of two-phase samples, the anatase nuclei are surrounded by a rutile envelope. Content of anatase in the two-phase particles varied between 20 and 80%. Particles of all theTiO2samples had a globular shape of diameter between 10 and 30μm. When compared to the corresponding technical-grade samples, the optically pure anatase and rutile demonstrated higher photocatalytic activity in the destruction of tetradecylpyridinium chloride, Methylene Blue and tetrachlorofluorescein as well as in reduction ofCr2O7,MnO4,[Fe(CN)6]3−and[Fe(CN)6]4−. The photocatalytic reactions bring about the reduction of the inorganic anions to yield water insoluble substances and mineralization of the organic compounds. Rate constant of the all above processes do not depend on specific surface area ofTiO2and adsorption of the substrates on theTiO2samples. The rutile calcined at 1027K exhibits the highest specific rate constants. Exposure toγ-radiation increases photocatalytic activity of the dispersedTiO2. The influence ofTiO2and substrate on the photocatalytic reactions is caused by the influence of these factors on the formation of reactive electron hole pair and on the efficiency of the interfacial electron transfer.

scholarly journals Relationship between Synthesis Conditions and Photocatalytic Activity of Nanocrystalline TiO2

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Yosep Han ◽  
Hyung-Seok Kim ◽  
Hyunjung Kim
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Specific Surface ◽  
Crystallite Size ◽  
Surface Area ◽  
Calcination Temperature ◽  
Specific Surface Area ◽  
Molar Ratio ◽  
Hydroxyl Groups ◽  
Synthesis Conditions

The degradation efficiency of methylene blue by TiO2nanoparticles, which were synthesized under different synthesis conditions (i.e., molar ratio of water and titanium tetraisopropoxide (TTIP), pH, and calcination temperature) in a sol-gel process, was systematically investigated. The results showed that increasing the molar ratio of water and TTIP led to the enhanced photocatalytic activity of TiO2nanoparticles, which were likely attributed to the increased specific surface area of TiO2nanoparticles synthesized with high molar ratio. The results were supported by the relative increase in the size of interaggregated pores of the aggregated TiO2nanoparticles. The best photocatalytic activity of TiO2nanoparticles was observed at acidic synthesis conditions; however, the results were not consistent with physical properties for the crystallinity and the crystallite size of TiO2nanoparticles but rather explained by the presence of abundant hydroxyl groups and water molecules existing on the surface of TiO2under acidic synthesis environments. Furthermore, methylene blue degradation experiments revealed that the photocatalytic activity of TiO2nanoparticles was maximized at the calcination temperature of 700°C. The trend was likely due to the combined effect of the anatase crystallinity which showed the highest value at 700°C and the crystallite size/specific surface area which did not excessively increase up to 700°C.

Effect of phase composition, morphology, and specific surface area on the photocatalytic activity of TiO2 nanomaterials

RSC Advances ◽  
2014 ◽  
Vol 4 (87) ◽  
pp. 47031-47038 ◽  
Author(s):  
Hao Cheng ◽  
Jingyu Wang ◽  
Yizhi Zhao ◽  
Xijiang Han
Keyword(s):  
Photocatalytic Activity ◽  
Phase Composition ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Tio2 Nanomaterials

TiO2-based nanomaterials could reach the maximal photoactivity when designing 0D/1D heterogenous structure with appropriate phase composition and high surface area.

Synthesis of Novel Core-Shell Structured Hydroxyapatite/Meso-Silica for Removal of Methylene Blue from Aqueous Solutions

2012 ◽  
Vol 463-464 ◽  
pp. 543-547 ◽  
Author(s):  
Cheng Feng Li ◽  
Xiao Lu Ge ◽  
Shu Guang Liu ◽  
Fei Yu Liu
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Low Cost ◽  
Nitrogen Adsorption ◽  
Precipitation Method ◽  
Core Shell ◽  
Adsorption Desorption

Core-shell structured hydroxyapatite (HA)/meso-silica was prepared and used as absorbance of methylene blue (MB). HA/meso-silica was synthesized in three steps: preparation of nano-sized HA by wet precipitation method, coating of dense silica and deposition of meso-silica shell on HA. As-received samples were characterized by Fourier transformed infare spectra, small angle X-ray diffraction, nitrogen adsorption-desorption isotherm and transmission electron microscopy. A wormhole framework mesostructure was found for HA/meso-silica. The specific surface area and pore volume were 128 m2•g-1 and 0.36 cm3•g-1, respectively. From the adsorption isotherm, HA/meso-silica with the great specific surface area exhibited a prominent adsorption capacity of MB (134.0 mg/g) in comparison with bare HA (0 mg/g). This study might shed light on surface modification of conventional low-cost adsorbents for removal of organic pollutants from aqueous solutions.

scholarly journals Hybrid Monolith of Graphene/TEMPO-Oxidized Cellulose Nanofiber as Mechanically Robust, Highly Functional, and Recyclable Adsorbent of Methylene Blue Dye

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Asif Hussain ◽  
Jiebing Li ◽  
Jun Wang ◽  
Fei Xue ◽  
Yundan Chen ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Specific Surface ◽  
Charge Density ◽  
Surface Charge ◽  
Surface Area ◽  
Specific Surface Area ◽  
Surface Charge Density ◽  
Cellulose Nanofibers ◽  
Maximum Adsorption Capacity ◽  
Assembly Method

Herein we demonstrate first report on fabrication, characterization, and adsorptive appraisal of graphene/cellulose nanofibers (GO/CNFs) monolith for methylene blue (MB) dye. Series of hybrid monolith (GO/CNFs) were assembled via urea assisted self-assembly method. Hybrid materials were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction patterns, Raman spectroscopy, elemental analysis, thermogravimetric curve analysis, specific surface area, surface charge density measurement, and compressional mechanical analysis. It was proposed that strong chemical interaction (mainly hydrogen bonding) was responsible for the formation of hybrid assembly. GO/CNFs monolith showed mechanically robust architecture with tunable pore structure and surface properties. GO/CNFs adsorbent could completely remove trace to moderate concentrations of MB dye and follow pseudo-second-order kinetics model. Adsorption isotherm behaviors were found in the following order: Langmuir isotherm > Freundlich isotherm > Temkin isotherm model. Maximum adsorption capacity of 227.27 mg g−1 was achieved which is much higher than reported graphene based monoliths and magnetic adsorbent. Incorporation of nanocellulose follows exponential relationship with dye uptake capacities. High surface charge density and specific surface area were main dye adsorptive mechanism. Regeneration and recycling efficiency was achieved up to four consecutive cycles with cost-effective recollection and zero recontamination of treated water.

Sign in / Sign up

Export Citation Format

Share Document