scholarly journals Fabrication of Ag-modified hollow titania spheres via controlled silver diffusion in Ag–TiO2 core–shell nanostructures

2020 ◽  
Vol 11 ◽  
pp. 141-146 ◽  
Author(s):  
Bartosz Bartosewicz ◽  
Malwina Liszewska ◽  
Bogusław Budner ◽  
Marta Michalska-Domańska ◽  
Krzysztof Kopczyński ◽  
...  
Keyword(s):  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Hollow Spheres ◽  
Good Control ◽  
Structural Features ◽  
Noble Metal Nanoparticles ◽  
Simple Method ◽  
Vis Spectroscopy ◽  
Silver Diffusion

Inorganic hollow spheres find a growing number of applications in many fields, including catalysis and solar cells. Hence, a simple fabrication method with a low number of simple steps is desired, which would allow for good control over the structural features and physicochemical properties of titania hollow spheres modified with noble metal nanoparticles. A simple method employing sol–gel coating of nanoparticles with titania followed by controlled silver diffusion was developed and applied for the synthesis of Ag-modified hollow TiO2 spheres. The morphology of the synthesized structures and their chemical composition was investigated using SEM and X-ray photoelectron spectroscopy, respectively. The optical properties of the synthesized structures were characterized using UV–vis spectroscopy. Ag–TiO2 hollow nanostructures with different optical properties were prepared simply by a change of the annealing time in the last fabrication step. The synthesized nanostructures exhibit a broadband optical absorption in the UV–vis range.

The Structural, Magnetic and Optical Properties of Ni-Mg-Zn Ferrite Prepared With Different Complexing Agents via Sol-Gel Method

2021 ◽  
Author(s):  
Yanchun Zhang ◽  
Aimin Sun ◽  
Zhaxi Suonan
Keyword(s):  
Optical Properties ◽  
Electron Microscope ◽  
Sol Gel ◽  
Complexing Agents ◽  
Complexing Agent ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Zn Ferrite ◽  
Vis Spectroscopy

Abstract Different complexing agents were used to prepare Ni-Mg-Zn ferrite with the composition formula Ni0.2Mg0.2Zn0.6Fe2O4 via sol-gel method, which included citric acid, oxalic acid, egg white and EDTA. The Ni0.2Mg0.2Zn0.6Fe2O4 ferrite with no complexing agent was also prepared as a comparison. The chemical phases of samples were analyzed by the X-ray diffraction (XRD), which indicated that samples had spinel phase structure. The lattice constants of samples are in the range of 8.3980 ~ 8.4089 Å. The composition and structure were further studied by fourier transform infrared spectroscopy (FTIR). There were two typical characteristic bands related to the stretching vibrations of spinel ferrite in FTIR spectra. Scanning electron microscope (SEM) micrographs and transmission electron microscope (TEM) images showed that the particles have the shape of spherical cube. Energy dispersive spectrometer (EDS) analyzed the elements and ingredients of samples, which included Ni, Mg, Zn, Fe and O. X-ray photoelectron spectroscopy (XPS) is used to examine further the elemental composition and chemical state of sample prepared with EDTA as complexing agent. The optical properties of samples were investigated by photoluminescence spectra and UV-Vis spectroscopy. Vibrating sample magnetometer (VSM) was used to characterize magnetic properties, hysteresis loops revealed the ferrimagnetism behavior of prepared samples.

Green Formation of Nano-Hexagon from Nano-Triangle of Gold Nanoparticles Using Palm Oil Fronds Extracts

2019 ◽  
Vol 290 ◽  
pp. 87-92
Author(s):  
Adamu Ibrahim Usman ◽  
Azlan Abdul Aziz ◽  
Osama Abu Noqta
Keyword(s):  
Gold Nanoparticles ◽  
Palm Oil ◽  
Good Control ◽  
Soft Template ◽  
Face Centered Cubic ◽  
Simple Method ◽  
Vis Spectroscopy ◽  
Production Techniques ◽  
Face Centered ◽  
Xrd Patterns

A simple method to synthesized nanoparticles was satisfied by reduction of tetrachloroauric acid in the presence of palm oil fronds extracts as capping and reduced agents. The as-synthesized gold nanoparticles structures have a triangular and hexagonal shape that are of tens of nanometre in size. It was realized that good control shape of nano-hexagonal gold nanoparticles were obtained from nano-triangular gold nanoparticles in the absence of any soft template. The production techniques of the gold nanoparticles were examined by using UV-vis spectroscopy, EFTEM and XRD patterns, which showed peaks at (111), (200), (220), (311) and (222), that described the preferential structure of the AuNPs as face-centered cubic crystal

scholarly journals Application of Reverse Micelle Sol–Gel Synthesis for Bulk Doping and Heteroatoms Surface Enrichment in Mo-Doped TiO2 Nanoparticles

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 937 ◽  
Author(s):  
Roberto Nasi ◽  
Serena Esposito ◽  
Francesca Freyria ◽  
Marco Armandi ◽  
Tanveer Gadhi ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Reverse Micelle ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Actual State ◽  
Test Reaction ◽  
Potential Measurement ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Mo Content

TiO2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol–gel method allowing the dispersion of Mo atoms in the TiO2 matrix. Their textural and surface properties were characterized by means of X-ray powder diffraction, micro-Raman spectroscopy, N2 adsorption/desorption isotherms at −196 °C, energy dispersive X-ray analysis coupled to field emission scanning electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance UV–Vis spectroscopy, and ζ-potential measurement. The photocatalytic degradation of Rhodamine B (under visible light and low irradiance) in water was used as a test reaction as well. The ensemble of the obtained experimental results was analyzed in order to discover the actual state of Mo in the final materials, showing the occurrence of both bulk doping and Mo surface species, with progressive segregation of MoOx species occurring only at a higher Mo content.

Thermochromic VO2 Thin Film Prepared by Post Annealing Treatment of V2O5 Thin Film

2009 ◽  
Vol 79-82 ◽  
pp. 747-750 ◽  
Author(s):  
Dong Qing Liu ◽  
Wen Wei Zheng ◽  
Hai Feng Cheng ◽  
Hai Tao Liu
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Phase Transition ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Annealing Treatment ◽  
Simple Method ◽  
X Ray ◽  
Post Annealing ◽  
Vo2 Thin Films

Thermochromic vanadium dioxide (VO2) exhibits a semi-conducting to metallic phase transition at about 68°C, involving strong variations in electrical and optical properties. A simple method was proposed to prepare VO2 thin films from easily gained V2O5 thin films. The detailed thermodynamic calculation was done and the results show that V2O5 will decompose to VO2 when the post annealing temperature reaches 550°C at the atmospheric pressure of less than 0.06Pa. The initial V2O5 films were prepared by sol-gel method on fused-quartz substrates. Different post annealing conditions were studied. The derived VO2 thin film samples were characterized using X-ray diffraction and X-ray photoelectron spectroscopy. The electrical resistance and infrared emissivity of VO2 thin films under different temperatures were measured. The results show that the VO2 thin film derived from the V2O5 thin film annealed at 550°C for 10 hours is pure dioxide of vanadium without other valences. It was observed that the resistance of VO2 thin film with thickness about 600nm can change by 4 orders of magnitude and the 7.5-14μm emissivity can change by 0.6 during the phase transition.

Multiferroic Bismuth Ferrite Nanoparticles: Rapid Sintering Synthesis, Characterization, and Optical Properties

2010 ◽  
Vol 152-153 ◽  
pp. 81-85
Author(s):  
Xiong Wang ◽  
Yin Lin ◽  
Jin Guo Jiang
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray ◽  
Bifeo3 Nanoparticles ◽  
Rapid Sintering

The homogeneous multiferroic BiFeO3 nanoparticles with average particle size of 85 nm have been successfully synthesized by a simple sol-gel route. The prepared sample was characterized by a variety of techniques, such as X-ray diffractometry, thermogravimetric analysis and differential thermal analysis, differential scanning calorimeter analysis, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The obtained results shows that rapid sintering and subsequently quenching to room temperature are the two vital important factors for the preparation of pure BiFeO3. The magnetic phase transition (TN = 369 °C) and the ferroelectric phase transition (TC = 824.5 °C) were determined, revealing the antiferromagnetic and ferroelectric nature of the as-prepared BiFeO3 nanoparticles. The optical properties of the nanopowders were investigated. The strong band-gap absorption at 486 nm (2.55 eV) of the BiFeO3 nanoparticles may bring some novel applications.

Enhanced Electrical Properties of AZO/IZO Multilayered Thin Film with Post Laser Annealing Process

2021 ◽  
Vol 21 (3) ◽  
pp. 1971-1977
Author(s):  
Jihye Kang ◽  
Dongsu Park ◽  
Donghun Lee ◽  
Masao Kamiko ◽  
Sung-Jin Kim ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Optical Properties ◽  
Multilayer Structure ◽  
Laser Annealing ◽  
Transparent Conducting Oxide ◽  
Sol Gel ◽  
Electrical And Optical Properties ◽  
Vis Spectroscopy ◽  
Doped Zno

In this research, alternative deposition process of ZnO-based thin films have been studied for transparent conducting oxide (TCO) application. To improve the electrical and optical properties of transparent oxide thin films, alternatively stacked Al-doped ZnO and In-doped ZnO thin films were investigated. Multilayer structure of alternative 6 layers of thin films were prepared in this research. Especially, Aluminum and Indium were chosen as dopant materials. Thin films of Al-doped ZnO (AZO) and In-doped ZnO (IZO) were alternatively deposited by spin coating with sol-gel method. After deposition of multilayered thin films, multi steps of furnace (F), rapid thermal annealing (R) and CO2 laser annealing (L) processes were carried out and investigated thin film properties by dependence of post-annealing sequence and thin film structures. The electrical and optical properties of thin films were investigated by 4-point probe and UV-vis spectroscopy and its shows the greatest sheet resistance value of 0.59 kΩ/sq. from AZO/IZO multilayered structure and upper 85% of transmittance. The structural property and surface morphology were measured by X-Ray Diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The Al- and In-doped ZnO thin film shows the highest intensity value at (002) peak of AZO/IZO multilayer structure which was performed FRL process.

Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles

2012 ◽  
Vol 455-456 ◽  
pp. 110-114 ◽  
Author(s):  
Xuan Dong Li ◽  
Xi Jiang Han ◽  
Wen Ying Wang ◽  
Xiao Hong Liu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Nb-doped TiO2 powders with different concentrations of Nb have been synthesized by a sol-gel method and characterized by a series of technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. The photocatalytic activity of Nb-doped TiO2 is evaluated by degradation efficiency of methyl orange in aqueous solution. The results indicate that the photocatalytic activity of Nb-doped TiO2 synthesized with a Nb/Ti molar ratio of 5% is higher than that of TiO2 under the visible light.

Effect of Ag and Au doping on the photocatalytic activity of TiO2 supported on textile fibres

2008 ◽  
Vol 1077 ◽  
Author(s):  
Mohammed Jasim Uddin ◽  
Federico Cesano ◽  
Domenica Scarano ◽  
Silvia Bordiga ◽  
Adriano Zecchina
Keyword(s):  
Thin Films ◽  
Light Exposure ◽  
Sol Gel ◽  
Tio2 Thin Films ◽  
Simple Method ◽  
Purple Colour ◽  
Cotton Fibres ◽  
Vis Spectroscopy ◽  
Cotton Textiles ◽  
Grey Colour

ABSTRACTA simple method to develop TiO2, Ag or Au-doped TiO2 thin films on cotton textiles for advanced applications, is reported. The homogeneous TiO2 thin films have been deposited on cotton textiles by using sol-gel method at low temperature (100° C), whereas Ag and Au nanoparticles were then deposited on the pre-existent TiO2 films by photoreduction. The Ag/TiO2 covered cotton fibres show multichromic behaviour (grey colour under visible light and brown colour upon ultraviolet light exposure) as well as photoactivity. The Au-TiO2 film coated the cotton textile produces a purple colour with excellent self cleaning properties. The original and treated fibres have been characterized by several techniques (SEM, HRTEM, FTIR, Raman, UV–vis spectroscopy and XRD).

scholarly journals Influence of Preparation Method on the Structural, Linear and Nonlinear Optical Properties of TiN Nanoparticles

2021 ◽  
Author(s):  
Mahdi Safa ◽  
Yasser Rajabi ◽  
Mahdi Ardyanian
Keyword(s):  
Optical Properties ◽  
Titanium Nitride ◽  
Nonlinear Optical ◽  
Sol Gel ◽  
Tin Nanoparticles ◽  
Vis Spectroscopy ◽  
Optical Applications ◽  
Co Precipitation ◽  
Optical Behavior ◽  
Saturation Absorption

Abstract In this paper, titanium nitride nanoparticles were prepared in three methods, In the first method, titanium nitride nanoparticles were prepared by the Ball-mill method; in the second and third methods, the nanoparticles were synthesized by the sol-gel, and the co-precipitation methods. The samples were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy, and scanning electron microscopy (SEM), for the study of structural, linear optical properties, and surface morphology study, respectively. The Z-scan technique was utilized to study the TiN nanoparticles nonlinearity. A change in nonlinear optical behavior with an increase in input pump power and concentration of the TiN nanoparticles was observed. Results showed that the TiN nanoparticles give new potentials in nonlinear optical applications. The nonlinear optical behavior of the TiN nanoparticles shifts from inverse saturation absorption to saturation absorption with increase of intensity.

Sign in / Sign up

Export Citation Format

Share Document