scholarly journals Thermal Analysis of Tilapia Fish Drying by Hybrid Solar Thermal Drying System

2021 ◽  
Vol 90 (1) ◽  
pp. 115-129
Author(s):  
Hussain Al-Kayiem ◽  
Tadahmun Ahmed Yassen ◽  
Sundus Al-Azawiey
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Solar Thermal ◽  
Injection Technique ◽  
Solar Air Heater ◽  
Solar Drying ◽  
Sun Drying ◽  
Rainy Weather ◽  
Thermal Drying ◽  
Drying Chamber

The present work presents a hybrid solar thermal drying of Tilapia fish to improve the product quality and satisfy the importers. The developed hybrid dryer utilized direct solar drying, a solar air heater and a thermal backup unit which sustains the drying process during the night, cloudy and rainy weather conditions. Besides, a new feature of the developed dryer utilizes the flue gas exhausted from the thermal unit to enhance the updraft in the drying chamber by re-injection of the flue gases in the chimney. The initial moisture content of the Tilapia fish used in the investigation was 246.6% on a dry basis, equivalent to 74% on a wet basis. The investigations were repeated three times on different days. Experimental results showed that the moisture content was reduced to an average final of 17.0% db (5.0% wb) within 17.5 hours, while in the open sun drying, it required around 48-72 hours. Hybrid solar drying required around 72% shorter time than open sun drying. The average overall drying efficiency of the developed system for drying Tilapia fish was 13.0%. The Re-injection technique used in the present hybrid solar-thermal system has excluded the need for an electric source for air extraction from the drying chamber, which is highly desired in the rural and fishery regions.

An Indirect Passive Solar Dryer for Drying

2011 ◽  
Vol 367 ◽  
pp. 517-524
Author(s):  
A. F. Alonge ◽  
O. O. Oniya
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Solar Drying ◽  
Drying Time ◽  
Sun Drying ◽  
Two Samples ◽  
Drying System ◽  
Average Size ◽  
Local Materials ◽  
Drying Chamber

A solar drying system designed on the principles of convective heat flow, constructed from local materials was employed in drying yam (Dioscorea Alata). A glass collector having an efficiency of about 0.63 was used along with an absorber for absorbing the heat energy. The drying chamber consisted of drying trays. A chimney fitted at the top centre of the drying chamber enhanced airflow. Air passing through the collector heated up and dried the foodstuff in the drying chamber. The latitude of Ilorin is 8.26oN and the collector angle could be varied . 56o C, 41o C and 71o C were obtained as the maximum attainable temperatures for the drying chamber, ambient and collector respectively. Two samples of yam chips, each weighing 1560g and having an average size of 1cm thick, were dried both inside the dryer and outside the dryer within its surrounding. The initial moisture content of the yam was 70.3% (wet basis) and its final moisture content was 9% (wet basis).The result was compared to natural sun drying. It was observed that the drying time was reduced from 52 hours for sun drying to 45 hours for solar drying. The total cost of the construction was 6, 105 Naira.

scholarly journals Energy Analysis of a Hybrid Solar Dryer for Drying Coffee Beans

2020 ◽  
Vol 9 (1) ◽  
pp. 131-139
Author(s):  
Suherman Suherman ◽  
Hasri Widuri ◽  
Shelyn Patricia ◽  
Evan Eduard Susanto ◽  
Raafi Jaya Sutrisna
Keyword(s):  
Moisture Content ◽  
Solar Collector ◽  
Energy Analysis ◽  
Initial Moisture Content ◽  
Solar Drying ◽  
Drying Method ◽  
Drying Time ◽  
Solar Dryer ◽  
Coffee Beans ◽  
Drying Chamber

In this study, hybrid solar drying of coffee beans was performed, and energy analysis was carried out, to assess the system’s performance, in terms of energy efficiency, compared to solar drying and the open sun drying method. The dryer has three compartments: solar collector for collecting solar radiation, drying chamber, and a Liquid Petroleum Gas burner, which acted as an auxiliary heater to assist the thermal energy. The drying chamber has four trays for placing the dried product. The initial moisture content of coffee beans was 54.23% w.b and was reduced to the final moisture content between 11-12% w.b. The coffee beans dried faster when subjected to the solar hybrid drying method, compared to other methods, with the dryer temperature of 40°C, 50°C, and 60°C. Results indicated that the coffee beans’ drying times varied from 10 to 14 hours. However, at temperature 50°C and 60°C for the 1st tray, the water content was reduced more rapidly compared to the other tray. From the results of this study, we can see the different efficiency of solar collector that shows of 54.15% at variable temperature 60°C for drying time 12:00 to 14:00 p.m for hybrid solar drying and for the solar drying process is 50.07% at the range of drying time 12:00 to 14:00 p.m. Mathematical modelling shows that Page model is the most suitable for describing the coffee beans’ drying behaviour using a hybrid solar dryer. The effective diffusivity values found in this experiment are all in the acceptable range for most agricultural products. ©2020. CBIORE-IJRED. All rights reserved

scholarly journals Development of an Automated Solar Powered Hot-air Supplemented Dryer

2019 ◽  
pp. 1-14
Author(s):  
O. Taiwo Aduewa ◽  
S. Ajiboye Oyerinde ◽  
P. Ayoola Olalusi
Keyword(s):  
Solar Energy ◽  
Moisture Content ◽  
Initial Moisture Content ◽  
Climatic Conditions ◽  
Solar Drying ◽  
Drying Time ◽  
Drying Temperature ◽  
Hot Air ◽  
Solar Powered ◽  
Drying Chamber

The world is facing two major challenges: one is to meet the exponential growing demand for energy particularly in developing and underdeveloped countries and other is to deal with global, regional and local environmental impacts resulting from supply and use of conventional energy. The cost-effective technology for solar drying that can be easily adopted among the rural farmers of developing countries needs to be developed in areas where solar energy is abundantly available. As cheap as the solar energy could be, there are associated problems with the stability of the energy for different purposes due to instability of climatic conditions. For this research, a solar powered hot-air supplemented dryer (SPHSD) with a capacity of 20 kg of sliced yam was designed and developed. The SPHSD has three sections which are solar collector chamber, drying chamber and hot-air supplement chamber which is powered with two 150-watt solar panel and a 200 amps solar battery for continuous operation during bad weather. All data were logged digitally for accuracy and test was done using yam slices. Difference in drying time and stability in drying temperature was evaluated using SPHSD and indirect solar dryer. The result shows stability of temperature in the drying chamber when SPHSD was used while the drying temperature fluctuates throughout the indirect solar drying test period. Drying experiment was conducted for 481 minutes (between 0910 hrs to 1713 hrs) reducing the moisture content from 71.91%, 72.1% and 72.8% to 27.95%, 25.78% and 28.23% for MC1, MC2 and MC3in wet basis respectively. Drying experiment was conducted for 832 minutes (between 0901 hrs to 2257 hrs) reducing the moisture content from initial moisture content levels of 72.66%, 71.48% and 71.48% to 13.47%, 12.53% and 12.54% for MC1, MC2 and MC3in wet basis respectively.

On the Development of Solar Drying System

2009 ◽  
Author(s):  
Adrian Ngu Ming Chai ◽  
M. Ibrahim ◽  
Cheah Bin Chuan ◽  
B. F. Yousif
Keyword(s):  
Solar Radiation ◽  
Moisture Content ◽  
Initial Moisture Content ◽  
Force Convection ◽  
Operating Conditions ◽  
Solar Thermal ◽  
Effective Period ◽  
Thermal Drying ◽  
Heat Collector ◽  
Drying System

In the present work, solar thermal drying system was developed. The main purpose of solar thermal drying system is to dry local vegetables and fruits. The drying system contained of two main parts as heat collector and the food drying cabinet. It is a force convection indirect type absorbing maximum solar radiation by the heat collector and provides heated air flow to the cabinet via two fans at the air inlet/outlet. The heat collector was inclined at 23.5° angle which suitable to the location for absorption of maximum solar radiation. Experiments were performed to test the efficiency of the solar heat collector and the cabinet at different daily times and operating conditions. The results revealed that 98.8°C temperature was achieved under static air condition. The air temperature at the inlet of the cabinet under both natural and forced air velocities was about 62.8°C. During the experiments, the cabinet was loaded with 426g of banana slices having an initial moisture content of 80%. The designed drying system managed to achieve a final desired moisture content of 15% within effective period of 7 hours without losing the product color.

scholarly journals Cherry Tomato Drying: Sun versus Convective Oven

Horticulturae ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 40
Author(s):  
Vincenzo Alfeo ◽  
Diego Planeta ◽  
Salvatore Velotto ◽  
Rosa Palmeri ◽  
Aldo Todaro
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Drying Process ◽  
Drying Time ◽  
Oven Drying ◽  
Sun Drying ◽  
Different Temperatures ◽  
Final Water Content ◽  
Drying Curves ◽  
Drying Conditions

Solar drying and convective oven drying of cherry tomatoes (Solanum lycopersicum) were compared. The changes in the chemical parameters of tomatoes and principal drying parameters were recorded during the drying process. Drying curves were fitted to several mathematical models, and the effects of air temperature during drying were evaluated by multiple regression analyses, comparing to previously reported models. Models for drying conditions indicated a final water content of 30% (semidry products) and 15% (dry products) was achieved, comparing sun-drying and convective oven drying at three different temperatures. After 26–28 h of sun drying, the tomato tissue had reached a moisture content of 15%. However, less drying time, about 10–11 h, was needed when starting with an initial moisture content of 92%. The tomato tissue had high ORAC and polyphenol content values after convective oven drying at 60 °C. The dried tomato samples had a satisfactory taste, color and antioxidant values.

Mathematical Modeling of the Process of Operation of the Drying Chamber of a Tower Grain Dryer With a Suction Air Flow

2020 ◽  
pp. 114-121
Author(s):  
Viktor Shvidia ◽  
◽  
Serhii Stepanenko ◽  
Keyword(s):  
Moisture Content ◽  
Air Flow ◽  
Initial Moisture Content ◽  
Material Balance ◽  
Operating Parameters ◽  
Conservation Of Energy ◽  
Grain Moisture ◽  
Optimal Mode ◽  
Drying Chamber ◽  
Main Operating

In the article, a drying scheme in a tower grain dryer has been developed, equations for the conservation of energy and material balance for grain, equations for mass transfer and heat transfer between the drying agent and grain have been drawn up. On their basis, analytical dependences of changes in the temperature and moisture content of grain, moisture content and temperature of the drying agent along and in the width of the drying channel were obtained, depending on the operating parameters (the value of rarefaction in the drying channel, the speed of grain movement along the drying channel, the speed of movement of the drying agent, the initial temperatures of the grain and drying agent, initial moisture content of grain, as well as initial moisture content of drying agent). Their analysis facilitates the work in choosing the optimal mode. The developed analytical dependences of changes in the main drying parameters (moisture and temperature of grain, moisture content and temperature of the drying agent) along the length and width of the drying channel in tower dryers with suction air flow make it possible to link the main operating parameters, which facilitate the choice of rational drying modes.

scholarly journals An Experimental Study and Analysis on Solar Drying of Bitter Gourd Using an Evacuated Tube Air Collector in Thanjavur, Tamil Nadu, India

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
AR. Umayal Sundari ◽  
P. Neelamegam ◽  
C. V. Subramanian
Keyword(s):  
Moisture Content ◽  
Tamil Nadu ◽  
Research Work ◽  
Bitter Gourd ◽  
Sun Drying ◽  
Solar Dryer ◽  
Drying Rates ◽  
Evacuated Tube ◽  
Drying Chamber

The objective of this research work is to design and develop a forced convection solar dryer using evacuated tube air collector and study its performance on bitter gourd in Thanjavur District, Tamilnadu, India. The designed solar dryer consists of a drying chamber, evacuated tube air collector, a blower, and a chimney. Drying parameters, moisture ratio and drying rates, are calculated and their performance is compared with natural sun drying. The results of the present study show that the proposed solar dryer has greater efficiency, and the moisture content of bitter gourd is reduced from 91% to 6.25% in 6 hours as compared to 10 hours in natural sun drying. In this solar dryer, the products are uniformly dried, and the moisture content of the sample is controlled. It is found that the quality of the dried bitter gourd using solar dryer is higher than the natural sun-dried bitter gourd.

scholarly journals Development and performance evaluation of a solar tunnel date dryer in Oman

2012 ◽  
Vol 17 ◽  
pp. 21
Author(s):  
Mohammad Ali Basunia ◽  
Hamid H. Al-Handali ◽  
Mohammed Issa Al-Belushi ◽  
Mohammad Shafiur Rahman ◽  
Osman Maghoub
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Average Moisture Content ◽  
Air Velocity ◽  
Sun Drying ◽  
Tunnel Dryer ◽  
Moisture Content Level ◽  
Collector Region ◽  
And Performance

Taking into consideration the date harvesting and landholding capacities of the marginalized rural farmers in Oman, a 12 meter long and 2 meter wide tunnel was designed and constructed to dry about 180-200 kg of freshly harvested dates per batch. Half of the tunnel base was used as a flat plate air heating solar collector and the other half as a dryer. The drying air was forced from the collector region (South side) to the drying region (North side) of the half circled tunnel where the product is to be dried. The drying temperature could be easily raised by some 5-30 oC above the ambient temperature inside the tunnel at an air velocity of approximately 0.5 m/sec. The test was conducted with 190.2 kg freshly harvested dates with initial moisture content of 32.8% (wet-basis) to analyze the performance of the dryer. The dates were dried to a final average moisture content of 18.6% (wet-basis) within two days (20 hours). The results indicated that the drying was faster in a solar tunnel dryer than the natural open air sun drying. It was possible to reach the moisture content level for safe storage within less than two days (20 hrs) with a solar tunnel dryer and 5-7 days in open air natural sun drying. The improvement in the quality of dates in terms of color and brightness was distinctly recognized. 

scholarly journals Effect of Pads and Thickness of Paddy on Moisture Removal under Sun Drying

2021 ◽  
Author(s):  
A. Narmilan ◽  
G. Niroash ◽  
M.I.M. Mowjood ◽  
A.T.A. Akram
Keyword(s):  
Sri Lanka ◽  
Moisture Content ◽  
Removal Rate ◽  
Initial Moisture Content ◽  
Storage Period ◽  
Moisture Removal ◽  
Drying Time ◽  
Sun Drying ◽  
Regular Time ◽  
Paddy Farmers

Background: Sun drying is a popular post-harvest operation to maintain rice quality during the storage period. Farmers use different pads and thicknesses for sun drying of paddy in Ampara district, Sri Lanka. A study was conducted to evaluate the suitability and effectiveness of the drying pad and thickness as practiced by local paddy farmers during the sun drying process.Methods: The grain with an initial moisture content of 28% (dry basis) was sun dried with four types of drying pads and five levels of thickness of grain. This experiment was conducted between 8.30 am and 4.30 pm at the South Eastern University of Sri Lanka in August 2020. The moisture contents of the grain were measured at regular time intervals.Result: It was found that the duration of drying of paddy from 28% to 13% moisture content on a dry basis was 300 to 540 minutes depending upon the drying pad and thickness. The tarpaulin is reasonable at shallow thickness with less time to reach the necessary moisture level than other drying pads. Black polythene and fertilizer bag can be utilized for sun drying of paddy at 4 cm thickness with 130 minutes. It was found that with an increase in the thickness of paddy from 0.5 cm to 4 cm, the drying time increases. A statistically significant interaction was obtained between drying pads and thickness level on moisture removal of paddy. Therefore, the moisture removal rate differs with the drying pad and thickness of the paddy under open sun drying.

scholarly journals Performance of hybrid solar-biomass dryer

2017 ◽  
Vol 5 ◽  
pp. 61-69
Author(s):  
M.K. Mishra ◽  
K.R. Shrestha ◽  
V Sagar ◽  
R.K. Amatya
Keyword(s):  
Moisture Content ◽  
Test Performance ◽  
Initial Moisture Content ◽  
Load Test ◽  
Sun Drying ◽  
Solar Dryer ◽  
Sunny Weather ◽  
Drying System ◽  
Overall Efficiency ◽  
Continuous Heat

Drying of agriculture product is energy intensive and traditional open sun drying is associate with many problems. Use of solar dryer is one of the alternative options. However, it is problematic in rainy and cloudy days. In order to measure the efficiency of solar/biomass hybrid dryer was proposed. A solar/biomass hybrid dryer was fabricated in RECAST Lab. Wood blocks were used as fuel for the gasifier stove. Biomass burning gasifier stove was integrated with solar dryer as an auxiliary heat source through a heat exchanger. The hybrid system of biomass with solar dryer ensures to provide continuous heat when needed. Due to the intermittent nature of sun, especially in rainy or cloudy season, food materials being processed get spoiled. A hybrid solar/biomass drying system solve such problems. Experiments were conducted to test performance of hybrid solar dryers by drying chili and banana. During the load test, conducted for chili, 16 kg of ripen chili with initial moisture content 72.58% (w. b.) was dried to moisture content of 7.13% (w. b.) in 20 hours. The result indicated that drying of chili was faster, within 20 hours (2 days), in natural sunny weather, against 48 hours (5 days) in open sun drying during April, in Kathmandu. Overall efficiency of drying system was found to be 4.29%.

Sign in / Sign up

Export Citation Format

Share Document