Cellulose Fibres as a Reinforcing Element in Building Materials

2017 ◽  
Author(s):  
Viola Hospodarova ◽  
Nadezda Stevulova ◽  
Vojtech Vaclavik ◽  
Tomas Dvorsky ◽  
Jaroslav Briancin
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Building Materials ◽  
Reference Sample ◽  
Physical And Mechanical Properties ◽  
Natural Fibre ◽  
Cement Composites ◽  
Cellulose Fibres ◽  
Cellulosic Fibres

Nowadays, construction sector is focusing in developing sustainable, green and eco-friendly building materials. Natural fibre is growingly being used in composite materials. This paper provides utilization of cellulose fibres as reinforcing agent into cement composites/plasters. Provided cellulosic fibres coming from various sources as bleached wood pulp and recycled waste paper fibres. Differences between cellulosic fibres are given by their physical characterization, chemical composition and SEM micrographs. Physical and mechanical properties of fibre-cement composites with fibre contents 0.2; 0.3and 0.5% by weight of filler and binder were investigated. Reference sample without fibres was also produced. The aim of this work is to investigate the effects of cellulose fibres on the final properties (density, water absorbability, coefficient of thermal conductivity and compressive strength) of the fibrecement plasters after 28 days of hardening. Testing of plasters with varying amount of cellulose fibres (0.2, 0.3 and 0.5 wt. %) has shown that the resulting physical and mechanical properties depend on the amount, the nature and structure of the used fibres. Linear dependences of compressive strength and thermal conductivity on density for plasters with cellulosic fibres adding were observed.

Study of Cement Composites Properties with Filler Based on Wood Pulp

2014 ◽  
Vol 897 ◽  
pp. 165-170 ◽  
Author(s):  
Lucia Kidalova ◽  
Nadežda Števulová ◽  
Anton Geffert
Keyword(s):  
Mechanical Properties ◽  
Building Materials ◽  
Raw Materials ◽  
Volume Ratio ◽  
Physical And Mechanical Properties ◽  
Wood Pulp ◽  
Cement Matrix ◽  
Cement Composites ◽  
Renewable Materials ◽  
Cellulosic Fibres

Sustainable building materials are based on the use of renewable materials instead of non-renewable. A large group of renewable raw materials are materials of plant origin containing cellulosic fibres which are used as filler into building material with reinforcement function of composite. This study aimed to establish the mechanical and physical properties of cement composites with organic filler, such as wood pulp. Pulp derived from wood pulping process is very interesting material as reinforcement in cement which contributes to a reduction of pollutants. In this paper, utilization of unbleached and bleached wood pulp in combination with cement matrix with emphasis on the physical and mechanical properties is studied. Varying the producing technology (wood pulp and cement ratio in mixture) it is possible to obtain composites with density from 940 to 1260 kg.m-3 and with compressive strength from 1.02 to 5.44 MPa after 28 days of hardening. The experimental results of mechanical properties indicate that cement composites with using unbleached wood pulp reaches higher values than composites based on bleached wood pulp. The percentage of water uptake increased with increasing the volume ratio of unbleached wood pulp in composite.

Effects of Black Scoria on Mechanical Properties and Thermal Insulation Properties of Building Materials

2021 ◽  
Vol 1047 ◽  
pp. 151-157
Author(s):  
Shoroog Alraddadi
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Room Temperature ◽  
Building Materials ◽  
Heat Insulation ◽  
Cement Composites ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Good Heat

The effect of fine black scoria on the mechanical properties and thermal conductivity of building materials was investigated in this study. Black scoria was used to replace cement in concrete with various percentages. Four concrete samples containing 0%, 10%, 20%, and 30% black scoria were prepared. Characterization black scoria was performed via X-ray powder diffraction, X-ray fluorescence, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry analysis. Then, the compressive strength of the samples was investigated after 14, 21, 28, and 91 days of curing at room temperature. Finally, the thermal conductivities of the samples were measured after 28 days. Based on the experimental results, the highest compressive strength among the samples was 45.3 MPa, obtained from the mixture containing 10% black scoria after 91 days of curing. It was also observed that the average thermal conductivity of the concrete samples decreased with an increase in the fine black scoria content from 1.8 to 0.193 W m−1 K−1. Thus, black scoria is an appropriate substitute for commercial admixtures in cement composites in thermally insulating building materials due to its low density, excellent compressive strength, and good heat insulation properties.

scholarly journals Physical and Mechanical Properties of Cemented Ash-Based Lightweight Building Materials with and without Pumice

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Neslihan Doğan-Sağlamtimur ◽  
Adnan Güven ◽  
Ahmet Bilgil
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Building Material ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
Mixing Ratio ◽  
Lightweight Material ◽  
Important Input ◽  
Axial Compressive Strength ◽  
International Companies

Pumice, cements (CEM I- and CEM II-type), waste fly and bottom ashes (IFA, GBA, and BBA) supplied from international companies were used to produce lightweight building materials, and physical-mechanical properties of these materials were determined. Axial compressive strength (ACS) values were found above the standards of 4 and 8 MPa (Bims Concrete (BC) 40 and 80 kgf/cm2 class) for cemented (CEM I) pumice-based samples. On the contrary, the ACS values of the pumice-based cemented (CEM II) samples could not be reached to these standards. Best ACS results (compatible with BC80) from these cemented lightweight material samples produced with the ashes were found in 50% mixing ratio as 10.6, 13.2, and 20.5 MPa for BBA + CEM I, GBA + CEM II, and IFA + CEM I, respectively, and produced with pumice were found as 8.4 MPa (same value) for GBA + pumice + CEM II (in 25% mixing ratio), BBA + pumice + CEM I (in 100% mixing ratio), and pumice + IFA + CEM I (in 100% mixing ratio), respectively. According to the results, cemented ash-based lightweight building material produced with and without pumice could widely be used for constructive purposes. As a result of this study, an important input to the ecosystem has been provided using waste ashes, whose storage constitutes a problem.

Dispersed Reinforcement Based on Natural Fibres Used in Cement Composites

2016 ◽  
Vol 722 ◽  
pp. 216-221
Author(s):  
Jitka Peterková ◽  
Martin Sedlmajer ◽  
Magdalena Kocianova
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Thermal Insulation ◽  
Considerable Effect ◽  
Fibre Reinforcement ◽  
Cement Composites ◽  
Cellulose Fibres ◽  
Natural Origin ◽  
Waste Cellulose

One of the options for improving the mechanical properties of cement composites is the use of fibre reinforcement. Nowadays, steel or polymer fibres are most frequently used for this purpose. However, given the increasingly stricter requirements related to environmental protection, one goal is to find ways of using alternative fibres of natural origin or waste fibres for which it is difficult to find other practical use. This paper focuses on one part of the development of materials which contain natural waste fibres as dispersed reinforcement in thermally insulating cement composites. The authors aimed to observe what influence the fibres have on the material’s final mechanical properties as well as thermal insulation properties. Another important factor, which was investigated, was the quotient of mechanical and thermal insulation properties. The results of this research showed that waste cellulose fibres have a considerable effect. The best compressive strength values were found in mixture M-2-BF which contained waste basalt fibres. The highest flexural strength values were reached by mixture M-3-CF-a containing cellulose fibres.

scholarly journals Adequate Correlation between the Physical and Mechanical Properties of Glass Foam

2021 ◽  
Vol 1 (4) ◽  
pp. 14-26
Author(s):  
Lucian Paunescu ◽  
Sorin Mircea Axinte ◽  
Marius Florin Dragoescu ◽  
Felicia Cosmulescu
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Insulation ◽  
Coal Fly Ash ◽  
Physical And Mechanical Properties ◽  
Ceramic Foam ◽  
Glass Waste ◽  
Glass Foam

The paper presents experimental results obtained in the manufacturing process of a glass foam by adequate correlation between its physical and thermal properties (density, porosity, thermal conductivity) and mechanical (compressive strength) by a slight controlled overheating of the foamed material. Using a powder mixture of glass waste (87-91.5 %), coal fly ash (3-9 %) and silicon carbide (4-5.5 %) microwave heated at 935-975 ºC by this unconventional technique, constituting the originality of the work, was obtained a glass-ceramic foam with moderate compressive strength (1.8-2.6 MPa) and very low thermal conductivity (0.058-0.070 W/m·K). The material overheating generated a homogeneous porous structure characterized by closed cells with relatively large dimensions (without the tendency to join neighboring cells) making it difficult to transfer heat across the material. The foamed product is suitable for the manufacture of thermal insulation blocks for the inner or outer walls of the building without excessive mechanical stress, being an advantageous alternative by comparison with known types of polymeric or fiberglass thermal insulation materials.

scholarly journals Optimization of Cellular Concrete Formulation with Aluminum Waste and Mineral Additions

2021 ◽  
Vol 7 (7) ◽  
pp. 1222-1234
Author(s):  
Mohammed Salah Bouglada ◽  
Noui Ammar ◽  
Belagraa Larbi
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Sand Dunes ◽  
Physical And Mechanical Properties ◽  
Experimental Program ◽  
Mechanical Resistance ◽  
Dune Sand ◽  
Mineral Additions ◽  
Cellular Concrete

The paper aims to study cellular concrete with a new approach of formulation without an autoclave, with the use of aluminum waste and incorporation of mineral additions into the sand and evaluate its physical and mechanical properties. In this experimental study, two types of cellular concrete are prepared, based on crushed and dune sand with the incorporation of 15% of the slag and 10% of pozzolana, as sand replacement. An experimental program was performed to determine the compressive strength at 28 days, the density and thermal conductivity of the confected cellular concrete. The obtained results showed that concretes prepared with crushed sand developed better mechanical resistance compared to the dune sand. It is also noted that the concretes containing the mineral additions provide a substantial increase in compressive strength in particular slag. Furthermore, cellular concretes with sand dunes offer better thermal conductivity, compared to those with crushed sand. The use of the additions reduces the Water/Binder (W/B) ratio and leads to a lower thermal conductivity regardless of the used sand nature. The outcome of the present study here in could present a modest contribution for the production of cellular concrete with local materials in particular dune sand, active mineral addition and aluminum waste. The physical and mechanical properties obtained from this new composition are estimated acceptable compared to those of the industry-prepared cellular concrete product. Doi: 10.28991/cej-2021-03091721 Full Text: PDF

scholarly journals Characterization of cement composites based on recycled cellulosic waste paper fibres

2018 ◽  
Vol 8 (1) ◽  
pp. 363-367 ◽  
Author(s):  
Nadezda Stevulova ◽  
Viola Hospodarova ◽  
Vojtech Vaclavik ◽  
Tomas Dvorsky ◽  
Tomas Danek
Keyword(s):  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Waste Paper ◽  
Strength Parameter ◽  
Hardened Cement ◽  
Cement Composites ◽  
Cellulose Fibres ◽  
Wood Processing ◽  
Fibre Cement ◽  
Cellulosic Fibres

AbstractNowadays, there is paying an attention to the utilization of natural, renewable and biodegradable resources of raw materials of lignocellulosic character, residues from agricultural crops and wood processing as well as waste from papermaking industry in building composite materials preparing. Also recycled fibres coming from waste paper are considered as valuable material. The objective of this study is to utilize these recycled cellulosic fibres into cement composites and characterise their impact on resulting physical and mechanical properties of fresh and hardened cement composites. Manufactured cement composites contained 0.2%, 0.3% and 0.5% addition of cellulosic fibres. In fresh fibre cement mixtures reduction in workability with increasing amount of cellulose fibres was noticed. Density as well as compressive and flexural strength of 28 and 90 days hardened fibre cement composites was tested. Distribution of cellulosic fibres with 0.5% addition in hardened fibre cement composites was also observed. The results of density determination of 28 and 90 days hardened fibre cement composites showed reduction in their values related to weight lighter concretes. Compressive strengths of fibre cement composites have shown decreasing character with increasing added amount of cellulosic fibres into the mixture up to 0.5%. Maximal decrease in compressive strength values was observed in composites containing 0.5% of cellulosic fibres. However, obtained strength parameter values of hardened composites had satisfying results for their application in construction as non-load bearing building material.

scholarly journals Adequate Correlation between the Physical and Mechanical Properties of Glass Foam

2021 ◽  
Vol 2 (4) ◽  
pp. 14-26
Author(s):  
Lucian Paunescu ◽  
Sorin Mircea Axinte ◽  
Marius Florin Dragoescu ◽  
Felicia Cosmulescu
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Insulation ◽  
Coal Fly Ash ◽  
Physical And Mechanical Properties ◽  
Ceramic Foam ◽  
Glass Waste ◽  
Glass Foam

The paper presents experimental results obtained in the manufacturing process of a glass foam by adequate correlation between its physical and thermal properties (density, porosity, thermal conductivity) and mechanical (compressive strength) by a slight controlled overheating of the foamed material. Using a powder mixture of glass waste (87-91.5 %), coal fly ash (3-9 %) and silicon carbide (4-5.5 %) microwave heated at 935-975 ºC by this unconventional technique, constituting the originality of the work, was obtained a glass-ceramic foam with moderate compressive strength (1.8-2.6 MPa) and very low thermal conductivity (0.058-0.070 W/m·K). The material overheating generated a homogeneous porous structure characterized by closed cells with relatively large dimensions (without the tendency to join neighboring cells) making it difficult to transfer heat across the material. The foamed product is suitable for the manufacture of thermal insulation blocks for the inner or outer walls of the building without excessive mechanical stress, being an advantageous alternative by comparison with known types of polymeric or fiberglass thermal insulation materials.

scholarly journals Development of new baked bricks based on clay and sawdust

2018 ◽  
Vol 149 ◽  
pp. 01040
Author(s):  
Omrane Benjeddou ◽  
Chokri Soussi ◽  
Mohamed Amine Khadimallah ◽  
Rayed Alyousef ◽  
Malek Jedidi
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Energy Saving ◽  
Experimental Work ◽  
Manufacturing Process ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
Unit Weight ◽  
Resistant Material ◽  
Cooking Temperature

Current research in the field of building materials is oriented towards the recovery of waste to ensure the lightening of certain building elements and energy saving. The objective of this study is to produce a new bricks by adding sawdust to clay mixtures. The first part of this experimental work consists on detremining the proper manufacturing process and cooking diagram for these new bricks. In the second part, the effect of the maximum cooking temperature, the firing phase time's of the bricks and the sawdust prportion on the physical and mechanical properties of the new bricks have been studied. The studied properties are the absorption ratio, the unit weight and the compressive strength. The results showed that the addition of an increasing amount of sawdust tends to modify the physical and mechanical properties of the cooked samples. The presence of sawdust reduces the number of connections between the clay grains and produces a lighter, more absorbent and less resistant material. Finally, the results showed that the manufacture of bricks based on sawdust is possible.

scholarly journals Thermo-Mechanical Properties of a Wood Fiber Insulation Board Using a Bio-Based Adhesive as a Binder

Buildings ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 152
Author(s):  
Franz Segovia ◽  
Pierre Blanchet ◽  
Nicolas Auclair ◽  
Gatien Geraud Essoua Essoua
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Citric Acid ◽  
Crude Glycerol ◽  
Wood Fiber ◽  
Physical And Mechanical Properties ◽  
Acid Mixture ◽  
Wood Fibers

The goal of the present study was to develop a low-density thermal insulation board using wood fibers and a bio-based adhesive as a binder, which was prepared from a crude glycerol and citric acid mixture. The physical and mechanical properties of insulation boards manufactured using two ratios of crude glycerol and citric acid (1:0.66 and 1:1 mol/mol) and two adhesive contents (14% and 20%) were evaluated. The results show that the insulation boards with a range of density between 332 to 338 kg m−3 present thermal conductivity values between 0.064 W/m-K and 0.066 W/m-K. The effect of adhesive content was very significant for certain mechanical properties (tensile strength perpendicular to surface and compressive strength). The tensile strength (internal bond) increased between 20% and 36% with the increased adhesive content. In contrast, the compressive strength decreased between 7% and 15%. The thermo-mechanical properties obtained of insulation boards such as thermal conductivity, traverse strength, tensile strength parallel and perpendicular to surface, and compressive strength are in accordance with the requirements of the American Society for Testing and Materials C208-12 standard for different uses. The results confirm the potential of crude glycerol and citric acid mixture to be used as an adhesive in the wood fiber insulation boards’ manufacturing for sustainability purposes.

Sign in / Sign up

Export Citation Format

Share Document