scholarly journals Physical and Mechanical Properties of Cemented Ash-Based Lightweight Building Materials with and without Pumice

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Neslihan Doğan-Sağlamtimur ◽  
Adnan Güven ◽  
Ahmet Bilgil
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Building Material ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
Mixing Ratio ◽  
Lightweight Material ◽  
Important Input ◽  
Axial Compressive Strength ◽  
International Companies

Pumice, cements (CEM I- and CEM II-type), waste fly and bottom ashes (IFA, GBA, and BBA) supplied from international companies were used to produce lightweight building materials, and physical-mechanical properties of these materials were determined. Axial compressive strength (ACS) values were found above the standards of 4 and 8 MPa (Bims Concrete (BC) 40 and 80 kgf/cm2 class) for cemented (CEM I) pumice-based samples. On the contrary, the ACS values of the pumice-based cemented (CEM II) samples could not be reached to these standards. Best ACS results (compatible with BC80) from these cemented lightweight material samples produced with the ashes were found in 50% mixing ratio as 10.6, 13.2, and 20.5 MPa for BBA + CEM I, GBA + CEM II, and IFA + CEM I, respectively, and produced with pumice were found as 8.4 MPa (same value) for GBA + pumice + CEM II (in 25% mixing ratio), BBA + pumice + CEM I (in 100% mixing ratio), and pumice + IFA + CEM I (in 100% mixing ratio), respectively. According to the results, cemented ash-based lightweight building material produced with and without pumice could widely be used for constructive purposes. As a result of this study, an important input to the ecosystem has been provided using waste ashes, whose storage constitutes a problem.

Cellulose Fibres as a Reinforcing Element in Building Materials

2017 ◽  
Author(s):  
Viola Hospodarova ◽  
Nadezda Stevulova ◽  
Vojtech Vaclavik ◽  
Tomas Dvorsky ◽  
Jaroslav Briancin
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Building Materials ◽  
Reference Sample ◽  
Physical And Mechanical Properties ◽  
Natural Fibre ◽  
Cement Composites ◽  
Cellulose Fibres ◽  
Cellulosic Fibres

Nowadays, construction sector is focusing in developing sustainable, green and eco-friendly building materials. Natural fibre is growingly being used in composite materials. This paper provides utilization of cellulose fibres as reinforcing agent into cement composites/plasters. Provided cellulosic fibres coming from various sources as bleached wood pulp and recycled waste paper fibres. Differences between cellulosic fibres are given by their physical characterization, chemical composition and SEM micrographs. Physical and mechanical properties of fibre-cement composites with fibre contents 0.2; 0.3and 0.5% by weight of filler and binder were investigated. Reference sample without fibres was also produced. The aim of this work is to investigate the effects of cellulose fibres on the final properties (density, water absorbability, coefficient of thermal conductivity and compressive strength) of the fibrecement plasters after 28 days of hardening. Testing of plasters with varying amount of cellulose fibres (0.2, 0.3 and 0.5 wt. %) has shown that the resulting physical and mechanical properties depend on the amount, the nature and structure of the used fibres. Linear dependences of compressive strength and thermal conductivity on density for plasters with cellulosic fibres adding were observed.

scholarly journals Development of new baked bricks based on clay and sawdust

2018 ◽  
Vol 149 ◽  
pp. 01040
Author(s):  
Omrane Benjeddou ◽  
Chokri Soussi ◽  
Mohamed Amine Khadimallah ◽  
Rayed Alyousef ◽  
Malek Jedidi
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Energy Saving ◽  
Experimental Work ◽  
Manufacturing Process ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
Unit Weight ◽  
Resistant Material ◽  
Cooking Temperature

Current research in the field of building materials is oriented towards the recovery of waste to ensure the lightening of certain building elements and energy saving. The objective of this study is to produce a new bricks by adding sawdust to clay mixtures. The first part of this experimental work consists on detremining the proper manufacturing process and cooking diagram for these new bricks. In the second part, the effect of the maximum cooking temperature, the firing phase time's of the bricks and the sawdust prportion on the physical and mechanical properties of the new bricks have been studied. The studied properties are the absorption ratio, the unit weight and the compressive strength. The results showed that the addition of an increasing amount of sawdust tends to modify the physical and mechanical properties of the cooked samples. The presence of sawdust reduces the number of connections between the clay grains and produces a lighter, more absorbent and less resistant material. Finally, the results showed that the manufacture of bricks based on sawdust is possible.

Investigation of Physical and Mechanical Properties of Construction Materials of Forced Carbonate Hardening

2018 ◽  
Vol 931 ◽  
pp. 475-480 ◽  
Author(s):  
Nikolay V. Lyubomirskiy ◽  
Stanisław Fic ◽  
Sergey I. Fedorkin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Building Materials ◽  
Construction Materials ◽  
Physical And Mechanical Properties ◽  
Building Products ◽  
Technological Factors ◽  
Dry Pressing

A technique for determining the modulus of elasticity of сonstruction materials on samples of small dimensions has been developed. Physical and mechanical properties of building materials based on calcareous-lime compositions of semi-dry pressing, hardening according to the principle of forced carbonization, depending on the prescription and technological factors of their production have been studied. It has been demonstrated that on the basis of these materials it is possible to obtain building products with compressive strength up to 30 MPa, tensile strength at bending up to 5 MPa and higher, and an elastic modulus up to 18 GPa.

scholarly journals MECHANICAL PROPERTIES OF RAMMED EARTH WITH RESPECT TO CLAY MIXTURE COMPOSITION

2019 ◽  
Vol 59 (4) ◽  
pp. 372-383
Author(s):  
Tereza Plaček Otcovská ◽  
Barbora Mužíková ◽  
Pavel Padevět
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Experimental Determination ◽  
Building Material ◽  
Building Materials ◽  
Bending Strength ◽  
Mixture Composition ◽  
Rammed Earth ◽  
Load Bearing

Unfired earth is a traditional building material, but it is less used than other building materials, such as concrete or steel. But the use of unfired earth is experiencing a renaissance. ammed earth is a type of unfired earth and is usually used for load bearing structures. This paper descries an experimental determination of the tensile bending strength and compressive strength of the rammed earth specimens with known compositions. Mechanical properties are dependent on these compositions (kind of clay, amount of clay, amount of mixture water). Laboratory specimens were produced without inorganic binders or fibrous admixtures. We observed higher tensile bending strengths and lower compressive strengths in specimen mixtures containing more clay. The obtained results were evaluated in a context of a previous research. The results were also compared with results published by another author.

The Performance of the Ceramsite Concrete Block and its Application Research

2015 ◽  
Vol 744-746 ◽  
pp. 1543-1546
Author(s):  
Le Le Yu ◽  
Jia Dai Chen ◽  
Yi Wen Wu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Building Materials ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Concrete Block ◽  
Application Research ◽  
Working Process ◽  
Concrete Building

Ceramsite concrete and ceramsite concrete block are characterized by lightweight, high strength and good thermal insulation properties, which are widely applied to construction. If amoderate amount of polystyrene particles is added during the working process of ceramsite concrete block in order to improve its physical properties, a kind of new ceramsite concrete building materials is produced. Based on the experimental studies, the article expounds the physical and mechanical properties in terms of density, water absorption and compressive strength, with the purpose of providing reliable evidence for the application and popularization of new ceramsite concrete block.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

scholarly journals Enhancing Density-Based Mining Waste Alkali-Activated Foamed Materials Incorporating Expanded Cork

CivilEng ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 523-540
Author(s):  
Imed Beghoura ◽  
Joao Castro-Gomes
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Pore Size ◽  
Physical And Mechanical Properties ◽  
Critical Parameters ◽  
Porous Structures ◽  
Foaming Agent ◽  
Al Powder ◽  
Highly Porous ◽  
Alkali Activated

This study focuses on the development of an alkali-activated lightweight foamed material (AA-LFM) with enhanced density. Several mixes of tungsten waste mud (TWM), grounded waste glass (WG), and metakaolin (MK) were produced. Al powder as a foaming agent was added, varying from 0.009 w.% to 0.05 w.% of precursor weight. Expanded granulated cork (EGC) particles were incorporated (10% to 40% of the total volume of precursors). The physical and mechanical properties of the foamed materials obtained, the effects of the amount of the foaming agent and the percentage of cork particles added varying from 10 vol.% to 40% are presented and discussed. Highly porous structures were obtained, Pore size and cork particles distribution are critical parameters in determining the density and strength of the foams. The compressive strength results with different densities of AA-LFM obtained by modifying the foaming agent and cork particles are also presented and discussed. Mechanical properties of the cured structure are adequate for lightweight prefabricated building elements and components.

scholarly journals Properties of High-Strength Flowable Mortar Reinforced with Palm Fibers

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Test Results ◽  
Palm Fiber ◽  
Toughness Index ◽  
Strength And Toughness

This study was conducted to determine some physical and mechanical properties of high-strength flowable mortar reinforced with different percentages of palm fiber (0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, and 1.6% as volumetric fractions). The density, compressive strength, flexural strength, and toughness index were tested to determine the mechanical properties of this mortar. Test results illustrate that the inclusion of this fiber reduces the density of mortar. The use of 0.6% of palm fiber increases the compressive strength and flexural strength by about 15.1%, and 16%, respectively; besides, the toughness index (I5) of the high-strength flowable mortar has been significantly enhanced by the use of 1% and more of palm fiber.

Research on Mechanical Properties of Crumb Rubber Concrete

2011 ◽  
Vol 477 ◽  
pp. 290-295 ◽  
Author(s):  
Li Bo Bian ◽  
Shao Min Song
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Apparent Density ◽  
Crumb Rubber ◽  
Fatigue Performance ◽  
Brittleness Index ◽  
Mixing Ratio ◽  
Rubber Concrete

Considering large number production of the abandoned tyres and the question of the concrete with mixture of crumb rubber，the mainly task of this paper is to study the mechanical properties of different mixing ratio concrete with vary volume of crumb rubber. The results showed that the workability, apparent density, compressive strength, flexural strength and brittleness index decrease as the increase of crumb rubber. While the anti-crack performance and anti-fatigue performance can be improved. The wear-resistance properties are a little lower than common concrete.

Study of the Effect of PP and LDPE Thermoplastic Binder Addition on the Mechanical Properties and Physical Properties of Particulate Composites for Building Material Application

2019 ◽  
Vol 964 ◽  
pp. 115-123
Author(s):  
Sigit Tri Wicaksono ◽  
Hosta Ardhyananta ◽  
Amaliya Rasyida ◽  
Feisha Fadila Rifki
Keyword(s):  
Mechanical Properties ◽  
Compression Strength ◽  
Building Materials ◽  
Construction Material ◽  
Construction Materials ◽  
Physical And Mechanical Properties ◽  
Waste Recycling ◽  
Plastic Waste ◽  
Particulate Composites ◽  
Water Absorbability

Plastic waste is majority an organic material that cannot easily decomposed by bacteria, so it needs to be recycled. One of the utilization of plastic waste recycling is become a mixture in the manufacture of building materials such as concrete, paving block, tiles, roof. This experiment purpose to find out the effect of addition of variation of LDPE and PP thermoplastic binder to physical and mechanical properties of LDPE/PP/Sand composite for construction material application. In this experiment are using many tests, such are SEM, FTIR, compression strength, density, water absorbability, and hardness. the result after the test are the best composition of composite PP/LDPE/sand is 70/0/30 because its have compression strength 14,2 MPa, while density value was 1.30 g/cm3, for the water absorbability is 0.073%, and for the highest hardness is 62.3 hardness of shore D. From the results obtained, composite material can be classified into construction materials for mortar application S type with average compression strength is 12.4 MPa.

Sign in / Sign up

Export Citation Format

Share Document