scholarly journals Siderite Dissolution in Mars-analog Brines: Kinetics and Reaction Products

2021 ◽  
Vol 2 (5) ◽  
pp. 169
Author(s):  
M. D. Cullen ◽  
C. M. Phillips-Lander ◽  
A. S. Elwood Madden ◽  
M. E. Elwood Madden
Keyword(s):  
Reaction Products ◽  
Mars Analog

Lead aspartate: a new en bloc stain for electron microscopy

1978 ◽  
Vol 36 (2) ◽  
pp. 34-35
Author(s):  
J.R. Walton
Keyword(s):  
Electron Microscopy ◽  
Calcium Ion ◽  
Enzyme Reaction ◽  
Lead Citrate ◽  
Reaction Products ◽  
En Bloc ◽  
Thin Sections ◽  
Lead Salts ◽  
Thin Sectioning ◽  
High Alkalinity

In electron microscopy, lead is the metal most widely used for enhancing specimen contrast. Lead citrate requires a pH of 12 to stain thin sections of epoxy-embedded material rapidly and intensively. However, this high alkalinity tends to leach out enzyme reaction products, making lead citrate unsuitable for many cytochemical studies. Substitution of the chelator aspartate for citrate allows staining to be carried out at pH 6 or 7 without apparent effect on cytochemical products. Moreover, due to the low, controlled level of free lead ions, contamination-free staining can be carried out en bloc, prior to dehydration and embedding. En bloc use of lead aspartate permits the grid-staining step to be bypassed, allowing samples to be examined immediately after thin-sectioning.Procedures. To prevent precipitation of lead salts, double- or glass-distilled H20 used in the stain and rinses should be boiled to drive off carbon dioxide and glassware should be carefully rinsed to remove any persisting traces of calcium ion.

Studies of Oxide Formation on Copper Thin Films by Electron Microscopy

1977 ◽  
Vol 35 ◽  
pp. 316-317
Author(s):  
G. G. Hembree ◽  
M. A. Otooni ◽  
J. M. Cowley
Keyword(s):  
Electron Microscopy ◽  
Electron Diffraction ◽  
Single Crystal ◽  
Crystal Surface ◽  
Crystal Defects ◽  
Diffraction Reflection ◽  
Reaction Products ◽  
Intermediate Energies ◽  
Crystal Films ◽  
Reflection Electron Microscopy

The formation of oxide structures on single crystal films of metals has been investigated using the REMEDIE system (for Reflection Electron Microscopy and Electron Diffraction at Intermediate Energies) (1). Using this instrument scanning images can be obtained with a 5 to 15keV incident electron beam by collecting either secondary or diffracted electrons from the crystal surface (2). It is particularly suited to studies of the present sort where the surface reactions are strongly related to surface morphology and crystal defects and the growth of reaction products is inhomogeneous and not adequately described in terms of a single parameter. Observation of the samples has also been made by reflection electron diffraction, reflection electron microscopy and replication techniques in a JEM-100B electron microscope.A thin single crystal film of copper, epitaxially grown on NaCl of (100) orientation, was repositioned on a large copper single crystal of (111) orientation.

Precipitation in silicon: Microanalysis

1988 ◽  
Vol 46 ◽  
pp. 474-475
Author(s):  
R.W. Carpenter
Keyword(s):  
Transition Metals ◽  
Spatial Resolution ◽  
Thin Foil ◽  
Precipitation Reaction ◽  
High Current ◽  
Reaction Products ◽  
Carbon And Nitrogen ◽  
Dielectric Layers ◽  
Precipitation Processes ◽  
Areas Of Interest

Interest in precipitation processes in silicon appears to be centered on transition metals (for intrinsic and extrinsic gettering), and oxygen and carbon in thermally aged materials, and on oxygen, carbon, and nitrogen in ion implanted materials to form buried dielectric layers. A steadily increasing number of applications of microanalysis to these problems are appearing. but still far less than the number of imaging/diffraction investigations. Microanalysis applications appear to be paced by instrumentation development. The precipitation reaction products are small and the presence of carbon is often an important consideration. Small high current probes are important and cryogenic specimen holders are required for consistent suppression of contamination buildup on specimen areas of interest. Focussed probes useful for microanalysis should be in the range of 0.1 to 1nA, and estimates of spatial resolution to be expected for thin foil specimens can be made from the curves shown in Fig. 1.

TEM characterization of reaction zone in a SiC fiber-reinforced titanium alloy

1988 ◽  
Vol 46 ◽  
pp. 738-739
Author(s):  
G. Das ◽  
R. E. Omlor
Keyword(s):  
Titanium Alloys ◽  
Reaction Zone ◽  
Carbon Layer ◽  
Fiber Reinforced ◽  
Reaction Products ◽  
Sic Fibers ◽  
Sic Fiber ◽  
The Matrix ◽  
Immense Potential

Fiber reinforced titanium alloys hold immense potential for applications in the aerospace industry. However, chemical reaction between the fibers and the titanium alloys at fabrication temperatures leads to the formation of brittle reaction products which limits their development. In the present study, coated SiC fibers have been used to evaluate the effects of surface coating on the reaction zone in the SiC/IMI829 system.IMI829 (Ti-5.5A1-3.5Sn-3.0Zr-0.3Mo-1Nb-0.3Si), a near alpha alloy, in the form of PREP powder (-35 mesh), was used a茸 the matrix. CVD grown AVCO SCS-6 SiC fibers were used as discontinuous reinforcements. These fibers of 142μm diameter contained an overlayer with high Si/C ratio on top of an amorphous carbon layer, the thickness of the coating being ∽ 1μm. SCS-6 fibers, broken into ∽ 2mm lengths, were mixed with IMI829 powder (representing < 0.1vol%) and the mixture was consolidated by HIP'ing at 871°C/0. 28GPa/4h.

Microstructural and fractographic characterization of B4C-Al cermets tested under dynamic and static loading

1989 ◽  
Vol 47 ◽  
pp. 562-563
Author(s):  
Gyeung Ho Kim ◽  
Mehmet Sarikaya ◽  
D. L. Milius ◽  
I. A. Aksay
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Fracture Toughness ◽  
Static Loading ◽  
Carbon Deposition ◽  
Full Density ◽  
Unique Combination ◽  
Strong Component ◽  
Reaction Products

Cermets are designed to optimize the mechanical properties of ceramics (hard and strong component) and metals (ductile and tough component) into one system. However, the processing of such systems is a problem in obtaining fully dense composite without deleterious reaction products. In the lightweight (2.65 g/cc) B4C-Al cermet, many of the processing problems have been circumvented. It is now possible to process fully dense B4C-Al cermet with tailored microstructures and achieve unique combination of mechanical properties (fracture strength of over 600 MPa and fracture toughness of 12 MPa-m1/2). In this paper, microstructure and fractography of B4C-Al cermets, tested under dynamic and static loading conditions, are described.The cermet is prepared by infiltration of Al at 1150°C into partially sintered B4C compact under vacuum to full density. Fracture surface replicas were prepared by using cellulose acetate and thin-film carbon deposition. Samples were observed with a Philips 3000 at 100 kV.

Enzyme histochemical application and backscattered electron imaging to visualize the distribution of lymphatic capillaries

1990 ◽  
Vol 48 (3) ◽  
pp. 880-881
Author(s):  
Seiji Kato
Keyword(s):  
Staining Method ◽  
Double Staining ◽  
Reaction Products ◽  
Blood Capillaries ◽  
Backscattered Electron Imaging ◽  
Histochemical Observation ◽  
Backscattered Electron ◽  
Double Staining Method ◽  
Electron Imaging ◽  
Cryostat Sections

Previously, the author repeatedly confirmed the higher 5’-nucleotidase (5’-Nase) and lower alkaline phoaphatase (ALPase) activities in the wall of lymphatic capillaries reacted with the lead-based method relative to those of blood capillaries. The ALPase, on the other hand, is markedly higher in blood capillaries than in lymphatics. On the basis of these enzyme characteristics, the author has developed a 5’-Nase— ALPase double staining method to differentiate small lymphatics from blood capillaries at the level of the light microcsopy. Furthermore, we applied it to histochemical observation of the lead-containing reaction products of 5’-Nase in lymphatics on the same or adjacent cryostat sections using backscattered electron imaging (BEI) in scanning electron microscope (SEM). This paper presents a new applicability of 5’-Nase histochemistry by BEI-SEM to demonstrate the distribution of lymphatic capillaries in tissue blocks.

A Novel Mutation Glyl672→Arg in Type 2A and a Homozygous Mutation in Type 2B von Willebrand Disease

1996 ◽  
Vol 76 (02) ◽  
pp. 253-257 ◽  
Author(s):  
Takeshi Hagiwara ◽  
Hiroshi Inaba ◽  
Shinichi Yoshida ◽  
Keiko Nagaizumi ◽  
Morio Arai ◽  
...  
Keyword(s):  
Missense Mutation ◽  
Novel Mutation ◽  
Point Mutations ◽  
Japanese Patients ◽  
Von Willebrand Disease ◽  
Homozygous Mutation ◽  
Missense Mutations ◽  
Reaction Products ◽  
Type 3 ◽  
Von Willebrand

SummaryGenetic materials from 16 unrelated Japanese patients with von Willebrand disease (vWD) were analyzed for mutations. Exon 28 of the von Willebrand factor (vWF) gene, where point mutations have been found most frequent, was screened by various restriction-enzyme analyses. Six patients were observed to have abnormal restriction patterns. By sequence analyses of the polymerase chain-reaction products, we identified a homozygous R1308C missense mutation in a patient with type 2B vWD; R1597W, R1597Q, G1609R and G1672R missense mutations in five patients with type 2A; and a G1659ter nonsense mutation in a patient with type 3 vWD. The G1672R was a novel missense mutation of the carboxyl-terminal end of the A2 domain. In addition, we detected an A/C polymorphism at nucleotide 4915 with HaeIII. There was no particular linkage disequilibrium of the A/C polymorphism, either with the G/A polymorphism at nucleotide 4391 detected with Hphl or with the C/T at 4891 detected with BstEll.

The Kinetics of Inhibition of the Action of Thrombin by the Fibrinopeptides Formed during the Clotting of Fibrinogen

1966 ◽  
Vol 16 (01/02) ◽  
pp. 277-295 ◽  
Author(s):  
A Silver ◽  
M Murray
Keyword(s):  
Amino Acids ◽  
Competitive Inhibition ◽  
Amorphous Material ◽  
Peptide Bond ◽  
Initial Reaction ◽  
Reaction Products ◽  
Coagulation Mechanism ◽  
Kinetics Of ◽  
Kinetics Of Inhibition ◽  
Burk Plot

SummaryVarious investigators have separated the coagulation products formed when fibrinogen is clotted with thrombin and identified fibrinopeptides A and B. Two other peaks are observed in the chromatogram of the products of coagulation, but these have mostly been dismissed by other workers. They have been identified by us as amino acids, smaller peptides and amorphous material (37). We have re-chromatographed these peaks and identified several amino acids. In a closed system of fibrinogen and thrombin, the only reaction products should be fibrin and peptide A and peptide B. This reasoning has come about because thrombin has been reported to be specific for the glycyl-arginyl peptide bond. It is suggested that thrombin also breaks other peptide linkages and the Peptide A and Peptide B are attacked by thrombin to yield proteolytic products. Thrombin is therefore probably not specific for the glycyl-arginyl bond but will react on other linkages as well.If the aforementioned is correct then the fibrinopeptides A and B would cause an inhibition with the coagulation mechanism itself. We have shown that an inhibition does occur. We suggest that there is an autoinhibition to the clotting mechanism that might be a control mechanism in the human body.The experiment was designed for coagulation to occur under controlled conditions of temperature and time. Purified reactants were used. We assembled an apparatus to record visually the speed of the initial reaction, the rate of the reaction, and the density of the final clot formed after a specific time.The figures we derived made available to us data whereby we could calculate and plot the information to show the mechanism and suggest that such an inhibition does exist and also further suggest that it might be competitive.In order to prove true competitive inhibition it is necessary to fulfill the criteria of the Lineweaver-Burk plot. This has been done. We have also satisfied other criteria of Dixon (29) and Bergman (31) that suggest true competitive inhibition.

Sign in / Sign up

Export Citation Format

Share Document