A Fourier-Bessel Expansion-Based Method for Automated Detection of Atrial Fibrillation From Electrocardiogram Signals

2019 ◽  
pp. 248-277
Author(s):  
Ashish Sharma ◽  
Shivnarayan Patidar
Keyword(s):  
Atrial Fibrillation ◽  
Ecg Signal ◽  
Clinical Environment ◽  
Test Dataset ◽  
Ecg Signals ◽  
Rr Interval ◽  
Electrocardiogram Signals ◽  
Detection And Identification ◽  
Bagged Decision Trees ◽  
Electrocardiogram Ecg

This chapter presents a new methodology for detection and identification of cardiovascular diseases from a single-lead electrocardiogram (ECG) signal of short duration. More specifically, this method deals with the detection of the most common cardiac arrhythmia called atrial fibrillation (AF) in noisy and non-clinical environment. The method begins with appropriate pre-processing of ECG signals in order to get the RR-interval and heart rate (HR) signals from them. A set of indirect features are computed from the original and the transformed versions of RR-interval and HR signals along with a set of direct features that are obtained from ECG signals themselves. In all, 47 features are computed and subsequently they are fed to an ensemble system of bagged decision trees for classifying the ECG recordings into four different classes. The proposed method has been evaluated with 2017 PhysioNet/CinC challenge hidden test dataset (phase II subset) and the final F1 score of 0.81 is obtained.

scholarly journals Capturing Electrocardiogram Signals from Chairs by Multiple Capacitively Coupled Unipolar Electrodes

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2835 ◽  
Author(s):  
Zhongjie Hou ◽  
Jinxi Xiang ◽  
Yonggui Dong ◽  
Xiaohui Xue ◽  
Hao Xiong ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Experimental Tests ◽  
Circuit Board ◽  
Signal Acquisition ◽  
Ecg Signal ◽  
Capacitively Coupled ◽  
Ecg Signals ◽  
Printed Circuit ◽  
Electrocardiogram Signals ◽  
Electrocardiogram Ecg

A prototype of an electrocardiogram (ECG) signal acquisition system with multiple unipolar capacitively coupled electrodes is designed and experimentally tested. Capacitively coupled electrodes made of a standard printed circuit board (PCB) are used as the sensing electrodes. Different from the conventional measurement schematics, where one single lead ECG signal is acquired from a pair of sensing electrodes, the sensing electrodes in our approaches operate in a unipolar mode, i.e., the biopotential signals picked up by each sensing electrodes are amplified and sampled separately. Four unipolar electrodes are mounted on the backrest of a regular chair and therefore four channel of signals containing ECG information are sampled and processed. It is found that the qualities of ECG signal contained in the four channel are different from each other. In order to pick up the ECG signal, an index for quality evaluation, as well as for aggregation of multiple signals, is proposed based on phase space reconstruction. Experimental tests are carried out while subjects sitting on the chair and clothed. The results indicate that the ECG signals can be reliably obtained in such a unipolar way.

scholarly journals Anticipating Atrial Fibrillation Signal Using Efficient Algorithm

2021 ◽  
Vol 17 (02) ◽  
pp. 106
Author(s):  
Mohand Lokman Ahmad Al-dabag ◽  
Haider Th. Salim ALRikabi ◽  
Raid Rafi Omar Al-Nima
Keyword(s):  
Atrial Fibrillation ◽  
Computational Cost ◽  
Extraction Methods ◽  
Support Vector ◽  
Ecg Signal ◽  
Heart Problem ◽  
Ecg Signals ◽  
The Right ◽  
Electrocardiogram Ecg ◽  
Low Computational Cost

One of the common types of arrhythmia is Atrial Fibrillation (AF), it may cause death to patients. Correct diagnosing of heart problem through examining the Electrocardiogram (ECG) signal will lead to prescribe the right treatment for a patient. This study proposes a system that distinguishes between the normal and AF ECG signals. First, this work provides a novel algorithm for segmenting the ECG signal for extracting a single heartbeat. The algorithm utilizes low computational cost techniques to segment the ECG signal. Then, useful pre-processing and feature extraction methods are suggested. Two classifiers, Support Vector Machine (SVM) and Multilayer Perceptron (MLP), are separately used to evaluate the two proposed algorithms. The performance of the last proposed method with the two classifiers (SVM and MLP) show an improvement of about (19% and 17%, respectively) after using the proposed segmentation method so it became 96.2% and 97.5%, respectively.

scholarly journals P-Wave Detection Using a Fully Convolutional Neural Network in Electrocardiogram Images

2020 ◽  
Vol 10 (3) ◽  
pp. 976
Author(s):  
Rana N. Costandy ◽  
Safa M. Gasser ◽  
Mohamed S. El-Mahallawy ◽  
Mohamed W. Fakhr ◽  
Samir Y. Marzouk
Keyword(s):  
Neural Network ◽  
Atrial Fibrillation ◽  
Convolutional Neural Network ◽  
P Wave ◽  
Ecg Signal ◽  
P Waves ◽  
Ecg Signals ◽  
Wave Detection ◽  
Automated Algorithm ◽  
Electrocardiogram Ecg

Electrocardiogram (ECG) signal analysis is a critical task in diagnosing the presence of any cardiac disorder. There are limited studies on detecting P-waves in various atrial arrhythmias, such as atrial fibrillation (AFIB), atrial flutter, junctional rhythm, and other arrhythmias due to P-wave variability and absence in various cases. Thus, there is a growing need to develop an efficient automated algorithm that annotates a 2D printed version of P-waves in the well-known ECG signal databases for validation purposes. To our knowledge, no one has annotated P-waves in the MIT-BIH atrial fibrillation database. Therefore, it is a challenge to manually annotate P-waves in the MIT-BIH AF database and to develop an automated algorithm to detect the absence and presence of different shapes of P-waves. In this paper, we present the manual annotation of P-waves in the well-known MIT-BIH AF database with the aid of a cardiologist. In addition, we provide an automatic P-wave segmentation for the same database using a fully convolutional neural network model (U-Net). This algorithm works on 2D imagery of printed ECG signals, as this type of imagery is the most commonly used in developing countries. The proposed automatic P-wave detection method obtained an accuracy and sensitivity of 98.56% and 98.78%, respectively, over the first 5 min of the second lead of the MIT-BIH AF database (a total of 8280 beats). Moreover, the proposed method is validated using the well-known automatically and manually annotated QT database (a total of 11,201 and 3194 automatically and manually annotated beats, respectively). This results in accuracies of 98.98 and 98.9%, and sensitivities of 98.97 and 97.24% for the automatically and manually annotated QT databases, respectively. Thus, these results indicate that the proposed automatic method can be used for analyzing long-printed ECG signals on mobile battery-driven devices using only images of the ECG signals, without the need for a cardiologist.

scholarly journals Detection of Atrial Fibrillation Based on Optimized Electrocardiogram (Ecg) Recordings

2019 ◽  
Vol 9 (2S3) ◽  
pp. 198-203
Keyword(s):  
Atrial Fibrillation ◽  
Genetic Algorithm ◽  
Support Vector ◽  
Svm Classifier ◽  
Ecg Signal ◽  
Ecg Signals ◽  
Public Dataset ◽  
Electrocardiogram Ecg ◽  
Heart Arrhythmias ◽  
Typical Process

Atrial fibrillation (AF) is one among the foremost common heart arrhythmias. It is terribly tough to discover unless a precise arrhythmia episode happens throughout the exploration. If the diagnosis and the treatment is delayed the Atrial fibrillation can lead to heart strokes and causes death, therefore automatic detection of AF is an urgent need. The analysis of ECG recordings is considered as one of the typical process of detecting AF. The ECG signals analysed by considering normal rhythm (N), other arrhythmias (O) and Atrial Fibrillation(A) and noises. In this paper the proposed technique is validated by considering open accessible public dataset. In the proposed method initially pre-processing of ECG signal is performed, next extraction of features, optimizing the features using genetic algorithm (GA) and finally classifying using support vector machine (SVM) classifier. The proposed algorithm achieves overall accuracy of 95.8% and by considering top 10 features the rate of accuracy is 96.8% which is better compared to the existing algorithm with an SNR of dB. The experimental results are performed using MATLAB and uggest that by availing the short ECG recording also the detection of AF is obtained accurately.

scholarly journals ECG data dependency for atrial fibrillation detection based on residual networks

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hyo-Chang Seo ◽  
Seok Oh ◽  
Hyunbin Kim ◽  
Segyeong Joo
Keyword(s):  
Atrial Fibrillation ◽  
Deep Learning ◽  
Blood Clot ◽  
Detection Algorithm ◽  
Ecg Signal ◽  
Data Dependency ◽  
Test Dataset ◽  
Detection Algorithms ◽  
Is Evaluation ◽  
Electrocardiogram Ecg

AbstractAtrial fibrillation (AF) is an arrhythmia that can cause blood clot and may lead to stroke and heart failure. To detect AF, deep learning-based detection algorithms have recently been developed. However, deep learning models were often trained with limited datasets and were evaluated within the same datasets, which makes their performance generally drops on the external datasets, known as data dependency. For this study, three different databases from PhysioNet were used to investigate the data dependency of deep learning-based AF detection algorithm using the residual neural network (Resnet). Resnet 18, 34, 50 and 152 model were trained with raw electrocardiogram (ECG) signal extracted from independent database. The highest accuracy was about 98–99% which is evaluation results of test dataset from the own database. On the other hand, the lowest accuracy was about 53–92% which was evaluation results of the external dataset extracted from different source. There are data dependency according to the train dataset and the test dataset. However, the data dependency decreased as a large amount of train data.

scholarly journals Study On ECG Data Dependency For Atrial Fibrillation Detection Based On Residual Networks

2021 ◽  
Author(s):  
Hyo-Chang Seo ◽  
Seok Oh ◽  
Segyeong Joo
Keyword(s):  
Atrial Fibrillation ◽  
Deep Learning ◽  
Blood Clot ◽  
Detection Algorithm ◽  
Ecg Signal ◽  
Data Dependency ◽  
Test Dataset ◽  
Detection Algorithms ◽  
Is Evaluation ◽  
Electrocardiogram Ecg

Abstract Atrial fibrillation (AF) is an arrhythmia that can cause blood clot and may lead to stroke and heart failure. To detect AF, deep learning-based detection algorithms have recently been developed. However, deep learning models were often trained with limited datasets and were evaluated within the same datasets, which makes their performance generally drops on the external datasets, known as data dependency. For this study, three different databases from PhysioNet were used to investigate the data dependency of deep learning-based AF detection algorithm using the residual neural network (Resnet). Resnet 18, 34, 50 and 152 model were trained with raw electrocardiogram (ECG) signal extracted from independent database. The highest accuracy was about 98–99% which is evaluation results of test dataset from the own database. On the other hand, the lowest accuracy was about 53–92% which was evaluation results of the external dataset extracted from different source. There are data dependency according to the train dataset and the test dataset. However, the data dependency decreased as a large amount of train data.

scholarly journals The Effects of Compression on the Detection of Atrial Fibrillation in ECG Signals

2021 ◽  
Vol 11 (13) ◽  
pp. 5908
Author(s):  
Raquel Cervigón ◽  
Brian McGinley ◽  
Darren Craven ◽  
Martin Glavin ◽  
Edward Jones
Keyword(s):  
Atrial Fibrillation ◽  
Characteristic Curve ◽  
Set Partitioning ◽  
Constrained Systems ◽  
Battery Life ◽  
Detection Accuracy ◽  
Ecg Signal ◽  
Signal Compression ◽  
Ecg Signals ◽  
Cardiac Devices

Although Atrial Fibrillation (AF) is the most frequent cause of cardioembolic stroke, the arrhythmia remains underdiagnosed, as it is often asymptomatic or intermittent. Automated detection of AF in ECG signals is important for patients with implantable cardiac devices, pacemakers or Holter systems. Such resource-constrained systems often operate by transmitting signals to a central server where diagnostic decisions are made. In this context, ECG signal compression is being increasingly investigated and employed to increase battery life, and hence the storage and transmission efficiency of these devices. At the same time, the diagnostic accuracy of AF detection must be preserved. This paper investigates the effects of ECG signal compression on an entropy-based AF detection algorithm that monitors R-R interval regularity. The compression and AF detection algorithms were applied to signals from the MIT-BIH AF database. The accuracy of AF detection on reconstructed signals is evaluated under varying degrees of compression using the state-of-the-art Set Partitioning In Hierarchical Trees (SPIHT) compression algorithm. Results demonstrate that compression ratios (CR) of up to 90 can be obtained while maintaining a detection accuracy, expressed in terms of the area under the receiver operating characteristic curve, of at least 0.9. This highlights the potential for significant energy savings on devices that transmit/store ECG signals for AF detection applications, while preserving the diagnostic integrity of the signals, and hence the detection performance.

scholarly journals Two Electrode ECG And EOG System For Monitoring Applications

2019 ◽  
Vol 8 (11) ◽  
pp. 262-265
Keyword(s):  
Reference Electrode ◽  
Cost Effective ◽  
Electrode System ◽  
Ecg Signal ◽  
Biomedical Signal ◽  
Ecg Signals ◽  
Arm Position ◽  
The Stability ◽  
Electrocardiogram Ecg ◽  
Total Gain

Heart and Eye are two vital organs in the human system. By knowing the Electrocardiogram (ECG) and Electro-oculogram (EOG), one will be able to tell the stability of the heart and eye respectively. In this project, we have developed a circuit to pick the ECG and EOG signal using two wet electrodes. Here no reference electrode is used. EOG and ECG signals have been acquired from ten healthy subjects. The ECG signal is obtained from two positions, namely wrist and arm position respectively. The picked-up biomedical signal is recorded and heart rate information is extracted from ECG signal using the biomedical workbench. The result found to be promising and acquired stable EOG and ECG signal from the subjects. The total gain required for the arm position is higher than the wrist position for the ECG signal. The total gain necessary for the EOG signal is higher than the ECG signal since the ECG signal is in the range of millivolts whereas EOG signal in the range of microvolts. This two-electrode system is stable, cost-effective and portable while still maintaining high common-mode rejection ratio (CMRR).

scholarly journals A Wearable Electrocardiogram Telemonitoring System for Atrial Fibrillation Detection

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 606 ◽  
Author(s):  
Minggang Shao ◽  
Zhuhuang Zhou ◽  
Guangyu Bin ◽  
Yanping Bai ◽  
Shuicai Wu
Keyword(s):  
Atrial Fibrillation ◽  
Ecg Monitoring ◽  
Web Browser ◽  
Ecg Signals ◽  
Cloud Server ◽  
Android App ◽  
Electrocardiogram Ecg ◽  
The Web ◽  
Ecg Data

In this paper we proposed a wearable electrocardiogram (ECG) telemonitoring system for atrial fibrillation (AF) detection based on a smartphone and cloud computing. A wearable ECG patch was designed to collect ECG signals and send the signals to an Android smartphone via Bluetooth. An Android APP was developed to display the ECG waveforms in real time and transmit every 30 s ECG data to a remote cloud server. A machine learning (CatBoost)-based ECG classification method was proposed to detect AF in the cloud server. In case of detected AF, the cloud server pushed the ECG data and classification results to the web browser of a doctor. Finally, the Android APP displayed the doctor’s diagnosis for the ECG signals. Experimental results showed the proposed CatBoost classifier trained with 17 selected features achieved an overall F1 score of 0.92 on the test set (n = 7270). The proposed wearable ECG monitoring system may potentially be useful for long-term ECG telemonitoring for AF detection.

scholarly journals Intelligent Deep Models Based on Scalograms of Electrocardiogram Signals for Biometrics

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 935 ◽  
Author(s):  
Yeong-Hyeon Byeon ◽  
Sung-Bum Pan ◽  
Keun-Chang Kwak
Keyword(s):  
Frequency Domain ◽  
Training Transfer ◽  
Training Data ◽  
Deep Convolutional Neural Networks ◽  
Ecg Signals ◽  
Electrocardiogram Signals ◽  
Noisy Signals ◽  
The Time Domain ◽  
Electrocardiogram Ecg

This paper conducts a comparative analysis of deep models in biometrics using scalogram of electrocardiogram (ECG). A scalogram is the absolute value of the continuous wavelet transform coefficients of a signal. Since biometrics using ECG signals are sensitive to noise, studies have been conducted by transforming signals into a frequency domain that is efficient for analyzing noisy signals. By transforming the signal from the time domain to the frequency domain using the wavelet, the 1-D signal becomes a 2-D matrix, and it could be analyzed at multiresolution. However, this process makes signal analysis morphologically complex. This means that existing simple classifiers could perform poorly. We investigate the possibility of using the scalogram of ECG as input to deep convolutional neural networks of deep learning, which exhibit optimal performance for the classification of morphological imagery. When training data is small or hardware is insufficient for training, transfer learning can be used with pretrained deep models to reduce learning time, and classify it well enough. In this paper, AlexNet, GoogLeNet, and ResNet are considered as deep models of convolutional neural network. The experiments are performed on two databases for performance evaluation. Physikalisch-Technische Bundesanstalt (PTB)-ECG is a well-known database, while Chosun University (CU)-ECG is directly built for this study using the developed ECG sensor. The ResNet was 0.73%—0.27% higher than AlexNet or GoogLeNet on PTB-ECG—and the ResNet was 0.94%—0.12% higher than AlexNet or GoogLeNet on CU-ECG.

Sign in / Sign up

Export Citation Format

Share Document