Error-State Extended Kalman Filter-Based Sensor Fusion for Optimized Drive Train Regulation of an Autonomous PHEV

2021 ◽  
pp. 56-74
Author(s):  
Parag Jose Chacko ◽  
Haneesh K. M. ◽  
Joseph X. Rodrigues
Keyword(s):  
Kalman Filter ◽  
Sensor Fusion ◽  
Extended Kalman Filter ◽  
Hybrid Electric Vehicle ◽  
Estimation Error ◽  
Latency Period ◽  
Measurement Unit ◽  
State Estimator ◽  
Fusion Data ◽  
Error State

An efficient state estimator is critical for the development of an autonomous plug-in hybrid electric vehicle (PHEV). To achieve effective autonomous regulation of the powertrain, the latency period and estimation error should be minimum. In this work, a novel error state extended kalman filter (ES-EKF)-based state estimator is developed to perform sensor fusion of data from light detection and ranging sensor (LIDAR), the inertial measurement unit sensor (IMU), and the global positioning system (GPS) sensors, and the estimation error is minimized to reduce latency. The estimator will provide information to an intelligent energy management system (IEMS) to regulate the powertrain for effective load sharing in the PHEV. The integration of the sensor fusion data with the vehicle model is simulated in MATLAB environment. The PHEV model is fed with the proposed state estimator output, and the response parameters of the PHEV are monitored.

Navigation of an Underwater Remotely Operated Vehicle Based on Extended Kalman Filter

2013 ◽  
Author(s):  
Blanca V. Martínez ◽  
Daniel A. Sierra ◽  
Rodolfo Villamizar
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Inertial Measurement Unit ◽  
Dynamic Models ◽  
Estimation Error ◽  
Covariance Matrices ◽  
Measurement Unit ◽  
Remotely Operated Vehicle ◽  
Filter Performance ◽  
Order Of Magnitude

An algorithm to estimate positions, orientations, linear velocities and angular rates of an Underwater Remotely Operated Vehicle (UROV), based on the Extended Kalman Filter (EKF), is presented. The complete UROV kinematic and dynamic models are combined to obtain the process equation, and measurements correspond to linear accelerations and angular rates provided by an Inertial Measurement Unit (IMU). The proposed algorithm is numerically validated and its results are compared with simulated UROV states. A discussion about the influence of the covariance matrices on the estimation error and overall filter performance is also included. As a conclusion, the proposed algorithm estimates properly the UROV linear velocities and angular rates from IMU measurements, and the noise in estimated states is reduced in about one order of magnitude.

Gas pipeline leakage detection in the presence of parameter uncertainty using robust extended Kalman filter

2021 ◽  
pp. 014233122198911
Author(s):  
Mohadese Jahanian ◽  
Amin Ramezani ◽  
Ali Moarefianpour ◽  
Mahdi Aliari Shouredeli
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Parameter Uncertainty ◽  
Oil And Gas ◽  
Estimation Error ◽  
Real Data ◽  
Gas Pipeline ◽  
Pipeline System ◽  
Parameter Uncertainties ◽  
Simulation Results

One of the most significant systems that can be expressed by partial differential equations (PDEs) is the transmission pipeline system. To avoid the accidents that originated from oil and gas pipeline leakage, the exact location and quantity of leakage are required to be recognized. The designed goal is a leakage diagnosis based on the system model and the use of real data provided by transmission line systems. Nonlinear equations of the system have been extracted employing continuity and momentum equations. In this paper, the extended Kalman filter (EKF) is used to detect and locate the leakage and to attenuate the negative effects of measurement and process noises. Besides, a robust extended Kalman filter (REKF) is applied to compensate for the effect of parameter uncertainty. The quantity and the location of the occurred leakage are estimated along the pipeline. Simulation results show that REKF has better estimations of the leak and its location as compared with that of EKF. This filter is robust against process noise, measurement noise, parameter uncertainties, and guarantees a higher limit for the covariance of state estimation error as well. It is remarkable that simulation results are evaluated by OLGA software.

scholarly journals End-Effector Pose Estimation in Complex Environments Using Complementary Enhancement and Adaptive Fusion of Multisensor

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Mingrui Luo ◽  
En Li ◽  
Rui Guo ◽  
Jiaxin Liu ◽  
Zize Liang
Keyword(s):  
Kalman Filter ◽  
Pose Estimation ◽  
Unscented Kalman Filter ◽  
Rbf Neural Network ◽  
Estimation Error ◽  
Estimation Method ◽  
Original Data ◽  
Measurement Unit ◽  
Complex Environments ◽  
End Effector

Redundant manipulators are suitable for working in narrow and complex environments due to their flexibility. However, a large number of joints and long slender links make it hard to obtain the accurate end-effector pose of the redundant manipulator directly through the encoders. In this paper, a pose estimation method is proposed with the fusion of vision sensors, inertial sensors, and encoders. Firstly, according to the complementary characteristics of each measurement unit in the sensors, the original data is corrected and enhanced. Furthermore, an improved Kalman filter (KF) algorithm is adopted for data fusion by establishing the nonlinear motion prediction of the end-effector and the synchronization update model of the multirate sensors. Finally, the radial basis function (RBF) neural network is used to adaptively adjust the fusion parameters. It is verified in experiments that the proposed method achieves better performances on estimation error and update frequency than the original extended Kalman filter (EKF) and unscented Kalman filter (UKF) algorithm, especially in complex environments.

scholarly journals Performance Enhancement of Pedestrian Navigation Systems Based on Low-Cost Foot-Mounted MEMS-IMU/Ultrasonic Sensor

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 364 ◽  
Author(s):  
Ming Xia ◽  
Chundi Xiu ◽  
Dongkai Yang ◽  
Li Wang
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Navigation System ◽  
Low Cost ◽  
Ultrasonic Sensor ◽  
Measurement Unit ◽  
Positioning Error ◽  
Process Noise ◽  
Pedestrian Navigation ◽  
Mems Imu

The pedestrian navigation system (PNS) based on inertial navigation system-extended Kalman filter-zero velocity update (INS-EKF-ZUPT or IEZ) is widely used in complex environments without external infrastructure owing to its characteristics of autonomy and continuity. IEZ, however, suffers from performance degradation caused by the dynamic change of process noise statistics and heading estimation errors. The main goal of this study is to effectively improve the accuracy and robustness of pedestrian localization based on the integration of the low-cost foot-mounted microelectromechanical system inertial measurement unit (MEMS-IMU) and ultrasonic sensor. The proposed solution has two main components: (1) the fuzzy inference system (FIS) is exploited to generate the adaptive factor for extended Kalman filter (EKF) after addressing the mismatch between statistical sample covariance of innovation and the theoretical one, and the fuzzy adaptive EKF (FAEKF) based on the MEMS-IMU/ultrasonic sensor for pedestrians was proposed. Accordingly, the adaptive factor is applied to correct process noise covariance that accurately reflects previous state estimations. (2) A straight motion heading update (SMHU) algorithm is developed to detect whether a straight walk happens and to revise errors in heading if the ultrasonic sensor detects the distance between the foot and reflection point of the wall. The experimental results show that horizontal positioning error is less than 2% of the total travelled distance (TTD) in different environments, which is the same order of positioning error compared with other works using high-end MEMS-IMU. It is concluded that the proposed approach can achieve high performance for PNS in terms of accuracy and robustness.

scholarly journals Extended Kalman Filter (EKF) Design for Vehicle Position Tracking Using Reliability Function of Radar and Lidar

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4126 ◽  
Author(s):  
Taeklim Kim ◽  
Tae-Hyoung Park
Keyword(s):  
Kalman Filter ◽  
Sensor Fusion ◽  
Extended Kalman Filter ◽  
Reliability Function ◽  
Position Estimation ◽  
Position Tracking ◽  
Radar Sensors ◽  
Vehicle Position ◽  
Sensor Errors ◽  
Fuzzy Adaptive

Detection and distance measurement using sensors is not always accurate. Sensor fusion makes up for this shortcoming by reducing inaccuracies. This study, therefore, proposes an extended Kalman filter (EKF) that reflects the distance characteristics of lidar and radar sensors. The sensor characteristics of the lidar and radar over distance were analyzed, and a reliability function was designed to extend the Kalman filter to reflect distance characteristics. The accuracy of position estimation was improved by identifying the sensor errors according to distance. Experiments were conducted using real vehicles, and a comparative experiment was done combining sensor fusion using a fuzzy, adaptive measure noise and Kalman filter. Experimental results showed that the study’s method produced accurate distance estimations.

Sign in / Sign up

Export Citation Format

Share Document