Nanomaterials and Nanocomposites Thermal and Mechanical Properties Modelling

2021 ◽  
pp. 180-199
Author(s):  
Siddhartha Kosti
Keyword(s):  
Thermal Properties ◽  
Structural Properties ◽  
Base Material ◽  
High Strength ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Weight Percentage ◽  
Structural Applications ◽  
Glass Frp ◽  
Selection Of

This chapter deals with the modelling of nanomaterial and nanocomposite mechanical and thermal properties. Enrichment in the technology requires materials having higher thermal properties or higher structural properties. Nanomaterials and nanocomposites can serve this purpose accurately for aerospace or thermal applications and structural applications respectively. The thermal system requires materials having high thermal conductivity while structural system requires materials having high strength. Selection of the material for particular application is very critical and requires knowledge and experience. Al, Cu, TiO2, Al2O3, etc. are considered for thermal applications while epoxy-glass, FRP, etc. are considered for structural applications. Modelling of these nanomaterials and nanocomposites is done with the help of different mathematical models available in the literature. Results show that addition of the nanoparticle/composite in the base material can enhance the thermal and structural properties. Results also show that amount of weight percentage added also affects the properties.

Nanomaterials and Nanocomposites Thermal and Mechanical Properties Modelling

2019 ◽  
pp. 234-256 ◽  
Author(s):  
Siddhartha Kosti
Keyword(s):  
Thermal Properties ◽  
Structural Properties ◽  
Base Material ◽  
High Strength ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Weight Percentage ◽  
Structural Applications ◽  
Glass Frp ◽  
Selection Of

This chapter deals with the modelling of nanomaterial and nanocomposite mechanical and thermal properties. Enrichment in the technology requires materials having higher thermal properties or higher structural properties. Nanomaterials and nanocomposites can serve this purpose accurately for aerospace or thermal applications and structural applications respectively. The thermal system requires materials having high thermal conductivity while structural system requires materials having high strength. Selection of the material for particular application is very critical and requires knowledge and experience. Al, Cu, TiO2, Al2O3, etc. are considered for thermal applications while epoxy-glass, FRP, etc. are considered for structural applications. Modelling of these nanomaterials and nanocomposites is done with the help of different mathematical models available in the literature. Results show that addition of the nanoparticle/composite in the base material can enhance the thermal and structural properties. Results also show that amount of weight percentage added also affects the properties.

Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials

2021 ◽  
Vol 320 ◽  
pp. 181-185
Author(s):  
Elvija Namsone ◽  
Genadijs Sahmenko ◽  
Irina Shvetsova ◽  
Aleksandrs Korjakins
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Raw Materials ◽  
High Strength ◽  
Strength Properties ◽  
Waste Materials ◽  
Mechanical And Thermal Properties ◽  
Experimental Part ◽  
Technogenic Raw Materials ◽  
Caustic Magnesia

Because of low calcination temperature, magnesia binders are attributed as low-CO2 emission materials that can benefit the environment by reducing the energy consumption of building sector. Portland cement in different areas of construction can be replaced by magnesia binder which do not require autoclave treatment for hardening, it has low thermal conductivity and high strength properties. Magnesium-based materials are characterized by decorativeness and ecological compatibility.The experimental part of this research is based on the preparation of magnesia binders by adding raw materials and calcinated products and caustic magnesia. The aim of this study was to obtain low-CO2 emission and eco-friendly material using local dolomite waste materials, comparing physical, mechanical, thermal properties of magnesium binders.

A Novel Packing Hollow Dodecahedron Model to Study the Mechanical and Thermal Properties of Stocastic Metallic Foams

2021 ◽  
Author(s):  
Rui Dai ◽  
Beomjin Kwon ◽  
Qiong Nian
Keyword(s):  
Thermal Properties ◽  
Physical Properties ◽  
Three Dimensional ◽  
Weight Ratio ◽  
High Strength ◽  
Specific Area ◽  
Deposition Process ◽  
Metallic Foam ◽  
Thermal Testing ◽  
Mechanical And Thermal Properties

Abstract Stochastic foam with hierarchy order pore structure possesses distinguished physical properties such as high strength to weight ratio, super lightweight, and extremely large specific area. These exceptional properties make stochastic foam as a competitive material for versatile applications e.g., heat exchangers, battery electrodes, automotive components, magnetic shielding, catalyst devices and etc. Recently, the more advanced hollow cellular (shellular) architectures with well-developed structure connections are studied and expected to surpass the solid micro/nanolattices. However, in terms of theoretical predicting and studying of the cellular foam architecture, currently no systematic model can be utilized to accurately capture both of its mechanical and thermal properties especially with hollow struts due to complexity induced by its stochastic and highly reticulate nature. Herein, for the first time, a novel packing three-dimensional (3D) hollow dodecahedron (HPD) model is proposed to simulate the cellular architecture. An electrochemical deposition process is utilized to manufacture the metallic foam with hollow struts. Mechanical and thermal testing of the as-manufactured foams are carried out to compare with the HPD model. HPD model is proved to accurately capture both the topology and the physical properties of stochastic foam at the similar relative density. Particularly, the proposed model makes it possible to readily access and track the physical behavior of stochastic foam architecture. Accordingly, this work will also offer inspiration for designing an efficient foam for specific applications.

Improvement of mechanical and thermal properties of hybrid composites through addition of halloysite nanoclay for light weight structural applications

2020 ◽  
pp. 152808372093662
Author(s):  
K C Nagaraja ◽  
S Rajanna ◽  
G S Prakash ◽  
G Rajeshkumar
Keyword(s):  
Thermal Properties ◽  
Composite Laminates ◽  
Morphological Analysis ◽  
Hybrid Composites ◽  
Mechanical And Thermal Properties ◽  
Light Weight ◽  
Building Structures ◽  
Suitable Alternative ◽  
Structural Applications ◽  
Infusion Technique

In this work the effect of stacking sequence of Carbon (C)/Glass (G) fibers and halloysites addition (1, 3 and 5 wt.%) on the mechanical and thermal properties of the hybrid composites were explored. The composite laminates were prepared by using Vacuum Assisted Resin Infusion Technique (VARIT). The outcomes disclosed that the hybrid composites having sequence of C2G3C2 (2-Carbon/3-Glass/2-Carbon layers) showed better overall properties. Moreover, the addition of halloysites enhanced the mechanical and thermal properties of the C2G3C2 hybrid composites. In particular, the hybrid composites added with 3 wt.% of halloysites showed higher overall properties among the other hybrid composites investigated. Finally, the morphological analysis was performed on the fractured surface of mechanical tested composites to study the failure mechanisms occurred. Based on the obtained results it can be concluded that the C2G3C2 hybrid composites added with 3 wt.% of halloysite could be a suitable alternative light weight material for automobile, aerospace and building structures.

Mechanical and thermal properties of PP/compatibilized PP/acid treated SWNTs nanocomposites: Effect of different acid treatment times

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Morteza Ghorbanzadeh Ahangari ◽  
Abdolhosein Fereidoon ◽  
Seyfolah Saedodin
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Acid Treatment ◽  
Treatment Process ◽  
Tensile Tests ◽  
Acid Mixture ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Maleated Polypropylene ◽  
Carboxylic Groups

AbstractIn the present work, the effect of different acid treatment times of singlewalled carbon nanotubes (SWNTs) on the mechanical and thermal properties of polypropylene (PP)/maleated polypropylene (PP-g-MA) nanocomposites was investigated. The acid treatment process was based on a mixture of concentrated sulphuric and nitric acids. The SWNTs were treated with the acid mixture for 1, 3, and 6 h. FTIR, Raman spectroscopy and TEM revealed the values of carboxylic groups, graphitization and morphology of acid treated SWNTs, respectively. The thermal and mechanical properties and the morphology of nanocomposites were investigated by tensile tests, DMTA, DSC, and SEM.

scholarly journals Synthesis and Characterization of Polyurethane-Nanoclay Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Manasa Nayani ◽  
Subhashini Gunashekar ◽  
Nidal Abu-Zahra
Keyword(s):  
Thermal Properties ◽  
Cell Structure ◽  
Thermoplastic Polyurethane ◽  
Mechanical And Thermal Properties ◽  
Composite Foam ◽  
Weight Percentage ◽  
Nanocomposite Foams ◽  
Methylene Diphenyl Diisocyanate ◽  
Closed Mold

In this study polyurethane (PUR)-nanoclay composites were synthesized using methylene diphenyl diisocyanate, polyol, and hectorite clay. The weight percentage of hectorite clay was varied at three different levels to study its effect on the properties of the thermoplastic polyurethane nanocomposite. The nanocomposite polyurethane foam was synthesized in a 2-step reaction process. The first step involved the addition and dispersion of nanoclay into the isocyanate. The mixture was then mixed with the polyol, and the foam was cast in a preheated closed mold. The PUR-nanocomposite foams were analyzed for cell structure, physical, mechanical, and thermal properties. The composite foam showed significant increase in tensile and flexural strengths, abrasion resistance, and thermal properties.

The Influence of Moisture Absorption on the Mechanical and Thermal Properties of Chemically Treated DPL Reinforced Hybrid Composite

2020 ◽  
Vol 978 ◽  
pp. 316-322 ◽  
Author(s):  
Priyadarshi Tapas Ranjan Swain ◽  
Sankar Narayan Das ◽  
Prabina Kumar Patnaik ◽  
Abhilash Purohit
Keyword(s):  
Thermal Properties ◽  
Glass Fiber ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Synthetic Fiber ◽  
Differential Scanning Calorimetric ◽  
Mechanical And Thermal Properties ◽  
Weight Percentage ◽  
Chemically Treated

Moisture absorption of natural fiber-based composites is one of the major problems in outdoor applications. The present study deals with the effect of moisture absorption on mechanical and thermal properties of unmodified/modified Date Palm Leaf (DPL) with glass fiber-based hybrid composites. Natural fibers were modified with alkaline treatment to improve fiber and matrix bonding. Conventional hand lay-up technique is used to fabricate the composites with varying different wt.% of treated and untreated short DPL with constant wt.% of glass fiber and prepared with random oriented manner. The combine effect of hydrophilic and hydrophobic nature find out as the study based upon the natural with synthetic fiber hybrid composites. Mechanical behaviour of the epoxy-based hybrid composites were characterized by using tensile, flexural and hardness test. The results revealed that significant improvement in mechanical properties by the addition of different weight percentage of modified DPL. Different thermal properties of the composites were described by using Thermo Gravimetric Analyzer (TGA) and Differential Scanning Calorimetric (DSC). Morphological investigation was carried out to by using scanning electron microscope. All the properties of untreated natural fiber reinforced composites were mostly affected by the influence of water absorption as compared with chemically treated based composites.

Joining of SiC Ceramic with Ternary Carbide Ti3SiC2

2005 ◽  
Vol 475-479 ◽  
pp. 1255-1258 ◽  
Author(s):  
Hongying Dong ◽  
Wen Bo Han ◽  
Shu Jie Li
Keyword(s):  
Thermal Properties ◽  
Base Material ◽  
External Pressure ◽  
Weld Strength ◽  
Mechanical And Thermal Properties ◽  
Technological Parameters ◽  
Orthogonal Experiments ◽  
Ternary Carbide ◽  
Sic Ceramic ◽  
The Subject

The investigation on joining of SiC to SiC has been conducted for some years. It is essential that the mechanical and thermal properties of the joints should meet the requirements of engineering. In view of the fact that the ternary carbide Ti3SiC2 has shown unique mechanical and thermal properties, it is promising to join SiC to SiC using ternary carbide Ti3SiC2 as filler (welding compound), and this is the subject to deal with in this paper. The joining of SiC to SiC has been successfully realized by hot pressing reaction joining process using Ti3SiC2 powder as filler. The optimized technological parameters have been obtained by orthogonal experiments, under which the achieved weld strength is higher than that of the welding base material SiC ceramic. Ti3SiC2 is stable up to 1200oC in Ar atmosphere with an external pressure. At the joining temperatures of 1300～ 1600oC the main phases of the interface are Ti3SiC2, TiC and TiSi2. The mechanism of bonding at the interface is interdiffusion and chemical reaction.

Sign in / Sign up

Export Citation Format

Share Document