Millimeter Wave Communication Networks

2021 ◽  
Vol 12 (3) ◽  
pp. 138-153
Author(s):  
Umar Farooq ◽  
Ghulam Mohammad Rather
Keyword(s):  
Communication Networks ◽  
Millimeter Wave ◽  
Wireless Systems ◽  
Development Stage ◽  
Practical Implementation ◽  
Initial Development ◽  
High Data ◽  
Potential Applications ◽  
Technical Challenges ◽  
Near Future

Millimeter wave (MMW) communication is a key technology to support the high data rate requirements of next generation networks and cope up the spectrum scarcity and capacity limitations of current wireless systems and hence enable a plethora of applications. However, this technology is in its initial development stage, and there are various technical challenges in its practical implementation that need to be addressed before its successful deployment. This paper reviews the state of the art in MMW communications and provides in-depth detail of the basic propagation characteristics of MMWs in different operation scenarios. The paper also analyses the various technical challenges of MMW communication networks envisaged in its implementation and highlights the design choices proposed so far to address these challenges. Finally, some of the potential applications of MMW communications that may emerge in the near future are also discussed.

scholarly journals 3D-SOP Millimeter-Wave Functions for High Data Rate Wireless Systems Using LTCC and LCP Technologies

2005 ◽  
Author(s):  
J.-H. Lee ◽  
S. Sarkar ◽  
S. Pinel ◽  
J. Papapolymerou ◽  
J. Laskar ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Wireless Systems ◽  
Satellite Communications ◽  
Data Rate ◽  
Wave Functions ◽  
High Data Rate ◽  
Design Parameters ◽  
Pass Filter ◽  
High Data ◽  
Band Pass

In this paper, the development of three-dimensional (3-D) millimeter-wave functions in multilayer low temperature cofired ceramic (LTCC) and liquid crystal polymer (LCP) technologies is presented for millimeter-wave compact and easy-to-design passive solutions for high data rate wireless systems. Both ceramic and organic technologies are candidates for the 3-D integration of system-on-package (SOP) miniaturized RF/microwave/millimeter-wave systems. LTCC has been widely used as a packaging material because of its process maturity/stability and its relatively high dielectric constant that enables a significant reduction in the module/function dimensions. As an alternative, LCP is an organic material that offers a unique combination of electrical, chemical, and mechanical properties, enabling high-frequency designs due to its ability to act as both the substrate and the package for flexible and conformal multilayer functions. A LTCC patch resonator filter that uses vertical coupling overlap and transverse cuts as design parameters has been designed to achieve a high level of miniaturization and a great compromise between compactness and power handling. Excellent agreement between the simulation and the measurement has been verified for two operating frequency bands (58–60GHz/38–40GHz) of RF communications and sensors for applications such as wireless broadband internet or inter-satellite communications. A band pass filter has been fabricated on LCP substrate, offering a very simple, low loss flexible and low lost filtering solution for wideband millimeter waves applications such as 60 GHz WLAN short-range gigabit wireless systems. The design exploits the ripple near the cut off frequency of Tchebysheff low pass filter to create a band pass response and it exhibits the insertion loss as low as 1.5 dB at the center frequency of 60GHz and 3-dB bandwidth of 16.7% (∼10 GHz).

Automated Fault Management in Wireless Networks

2011 ◽  
pp. 742-759
Author(s):  
Raquel Barco ◽  
Pedro Lázaro
Keyword(s):  
Communication Networks ◽  
Mobile Communication ◽  
Mobile Networks ◽  
Access Network ◽  
Fault Management ◽  
Wireless Systems ◽  
Complex Task ◽  
Radio Access ◽  
Mobile Communication Networks ◽  
Near Future

In the near future, several radio access technologies will coexist in Beyond 3G mobile networks (B3G) and they will be eventually transformed into one seamless global communication infrastructure. Selfmanaging systems (i.e. those that self-configure, self-protect, self-heal and self-optimize) are the solution to tackle the high complexity inherent to these networks. In this context, this chapter proposes a system for automated fault management in the Radio Access Network (RAN) of wireless systems. The chapter presents some basic definitions and describes how fault management is performed in current mobile communication networks. Some methods proposed for auto-diagnosis, which is the most complex task in fault management, are also discussed in this chapter. The presented systems incorporate Key Performance Indicators (KPIs) to identify the cause of the network malfunction.

High-Density Memristor-CMOS Ternary Logic Family

2020 ◽  
Author(s):  
Xiaoyuan Wang ◽  
Pengfei Zhou ◽  
Jason Eshraghian ◽  
Chih-Yang Lin ◽  
Herbert Ho-Ching Iu ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Practical Implementation ◽  
Switching Speed ◽  
High Data ◽  
Fast Switching ◽  
Data Density ◽  
Order Of Magnitude ◽  
High Transconductance ◽  
Logic Functions ◽  
Magnitude Improvement

<div>This paper presents the first experimental demonstration</div><div>of a ternary memristor-CMOS logic family. We systematically</div><div>design, simulate and experimentally verify the primitive</div><div>logic functions: the ternary AND, OR and NOT gates. These are then used to build combinational ternary NAND, NOR, XOR and XNOR gates, as well as data handling ternary MAX and MIN gates. Our simulations are performed using a 50-nm process which are verified with in-house fabricated indium-tin-oxide memristors, optimized for fast switching, high transconductance, and low current leakage. We obtain close to an order of magnitude improvement in data density over conventional CMOS logic, and a reduction of switching speed by a factor of 13 over prior state-of-the-art ternary memristor results. We anticipate extensions of this work can realize practical implementation where high data density is of critical importance.</div>

Nano sensors: Designing and Fabrication, Applications for flexible devices and Future Perspectives

2020 ◽  
Vol 16 ◽  
Author(s):  
Muhammad Bilal Tahir ◽  
Aleena Shoukat ◽  
Tahir Iqbal ◽  
Asma Ayub ◽  
Saff-e Awal ◽  
...  
Keyword(s):  
Self Assembly ◽  
Multidisciplinary Approach ◽  
Future Perspectives ◽  
Flexible Devices ◽  
More Care ◽  
Potential Applications ◽  
Nano Sensors ◽  
Mechanical Sensor ◽  
Small Models ◽  
Near Future

: The field of nanosensors has been gaining a lot of attention due to its properties such as mechanical and electrical ever since its first discovery by Dr. Wolter and first mechanical sensor in 1994. The rapidly growing demand of nanosensors has become profitable for a multidisciplinary approach in designing and fabrication of materials and strategies for potential applications. Frequent stimulating advancements are being suggested and established in recent years and thus heading towards multiple applications including food safety, healthcare, environmental monitoring, and biomedical research. Nanofabrication being an efficient method has been used in different industries like medical pharmaceutical for their complex functional geometry at a lower scale. These nanofabrications apply through different methods. There are five most commonly known methods which are frequently used, including top-down lithography, molecular self-assembly, bottom-up assembly, heat and pull method for fabrication of biosensors, etching for fabrication of nanosensors etc. Nanofabrication help at the nanoscale to design and work with small models. But these models due to their small size and being sensitive need more care for use as well as more training and experience to do work with. All methods used for nanofabrication are good and helpful. But more preferred is molecular self-assembly as it is helpful in mass production. Nanofabrication has become an emerging and developing field and it assumed that in near future our world is known by the new devices of nanofabrication.

scholarly journals Millimeter Wave Spatial Channel Characterization for Vehicular Communications

Proceedings ◽  
2019 ◽  
Vol 42 (1) ◽  
pp. 64 ◽  
Author(s):  
Fidel Rodríguez-Corbo ◽  
Leyre Azpilicueta ◽  
Mikel Celaya-Echarri ◽  
Peio López-Iturri ◽  
Imanol Picallo ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Autonomous Vehicles ◽  
Communication Systems ◽  
Vehicular Networks ◽  
Small Scale ◽  
Vehicular Communications ◽  
Next Generation ◽  
Vehicular Communication ◽  
High Definition ◽  
High Data

With the growing demand of vehicle-mounted sensors over the last years, the amount of critical data communications has increased significantly. Developing applications such as autonomous vehicles, drones or real-time high-definition entertainment requires high data-rates in the order of multiple Gbps. In the next generation of vehicle-to-everything (V2X) networks, a wider bandwidth will be needed, as well as more precise localization capabilities and lower transmission latencies than current vehicular communication systems due to safety application requirements; 5G millimeter wave (mmWave) technology is envisioned to be the key factor in the development of this next generation of vehicular communications. However, the implementation of mmWave links arises with difficulties due to blocking effects between mmWave transceivers, as well as different channel impairments for these high frequency bands. In this work, the mmWave channel propagation characterization for V2X communications has been performed by means of a deterministic in-house 3D ray launching simulation technique. A complex heterogeneous urban scenario has been modeled to analyze the different propagation phenomena of multiple mmWave V2X links. Results for large and small-scale propagation effects are obtained for line-of-sight (LOS) and non-LOS (NLOS) trajectories, enabling inter-data vehicular comparison. These analyzed results and the proposed methodology can aid in an adequate design and implementation of next generation vehicular networks.

Markov paths on the Poisson-Delaunay graph with applications to routeing in mobile networks

2000 ◽  
Vol 32 (01) ◽  
pp. 1-18 ◽  
Author(s):  
F. Baccelli ◽  
K. Tchoumatchenko ◽  
S. Zuyev
Keyword(s):  
Communication Networks ◽  
Mobile Networks ◽  
Path Length ◽  
Euclidean Distance ◽  
Voronoi Tessellation ◽  
Voronoi Cells ◽  
Ergodic Properties ◽  
Potential Applications ◽  
The Mean ◽  
Mobile Communication Networks

Consider the Delaunay graph and the Voronoi tessellation constructed with respect to a Poisson point process. The sequence of nuclei of the Voronoi cells that are crossed by a line defines a path on the Delaunay graph. We show that the evolution of this path is governed by a Markov chain. We study the ergodic properties of the chain and find its stationary distribution. As a corollary, we obtain the ratio of the mean path length to the Euclidean distance between the end points, and hence a bound for the mean asymptotic length of the shortest path. We apply these results to define a family of simple incremental algorithms for constructing short paths on the Delaunay graph and discuss potential applications to routeing in mobile communication networks.

Prognostic criteria for Polar Lows

2021 ◽  
Author(s):  
Natalia Vazaeva ◽  
Otto Chkhetiani ◽  
Michael Kurgansky
Keyword(s):  
Numerical Simulation ◽  
Wind Velocity ◽  
Large Scale ◽  
Satellite Image ◽  
Development Stage ◽  
Mature Stage ◽  
Initial Development ◽  
Polar Lows ◽  
Prognostic Criteria ◽  
Main Challenge

&lt;p&gt;Polar lows (PLs) are important mesoscale (horizontal diameter up to 1000 km) maritime weather systems at high latitudes, forming pole ward from the polar front. We consider the possible prognostic criteria of PLs, in particular, the kinematic helicity as a quadratic characteristic related to the integral vortex formations and the kinematic vorticity number (KVN). To calculate such characteristics we use reanalysis data and the results of numerical simulation with the WRF-ARW model (Version 4.1.) for the PLs over the Nordic (Norwegian and Barents) seas. For comparison, experimental data are used.&lt;/p&gt;&lt;p&gt;Our estimate of helicity is based on the connection of an integral helicity (IH) in the Ekman layer with the geostrophic wind velocity, due to the good correlation between IH and half the sum of the wind velocity squared. We have chosen IH averaged over preselected area covering the locality of PLs genesis. This area was moving along with the centre of PL during the numerical simulation.&lt;/p&gt;&lt;p&gt;The genesis of PLs can be divided into three stages: (i) an initial development stage, in which a number of small vortices appear in a shear zone; (ii) a late development stage, characterized by the merger of vortices; (iii) a mature stage, in which only a single PL is present. Approximately one day before PL formation, a significant increase in helicity was observed. The average helicity bulk density of large-scale motions has values of 0.3 &amp;#8211; 0.4 ms&lt;sup&gt;-2&lt;/sup&gt;. The local changes in helicity are adjacent to the front side of the PLs. The IH criterion described facilitates the identification of the PLs genesis area. For a more detailed analysis of the PL genesis, it is recommended to apply KVN, which is the additional indicator of PL size and intensity. At the moment of maximum intensity of PLs KVN can reach values of 12 &amp;#8211; 14 units. The advantage of using KVN is also in its clear change directly in the centre of the emerging PLs, which allows to precisely indicates the limits of the most intense part of PLs.&lt;/p&gt;&lt;p&gt;The main challenge is to make the operational forecast of PLs possible through the selection of the prognostic integral characteristics of PLs, sufficient for PLs identification and for analysis of their size and intensity in a convenient, usable and understandable way. The criteria associated with vorticity and helicity are reflected in the PLs genesis and development quite clearly. At this time, such a claim is only a hypothesis, which must be tested using a larger set of cases. Future work will need to extend these analyses to other active PL basins. Also, it would be interesting to compare the representation of PLs by using any other criteria. It is intended to use our combined criteria as a precursor to machine learning-based PLs identification procedure where satellite image analysis and capture of particular cloud patterns are currently applied in most of the cases. It would eliminate the time consuming first stage of collecting data sets.&lt;/p&gt;&lt;p&gt;This work was supported by the Russian Science Foundation (project No. 19-17-00248).&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document