QoS-Constrained Resource Allocation Scheduling for LTE Network

2015 ◽  
Vol 4 (1) ◽  
pp. 1-15 ◽  
Author(s):  
Hung-Chin Jang ◽  
Yun-Jun Lee
Keyword(s):  
Resource Allocation ◽  
Data Transmission ◽  
Orthogonal Frequency Division Multiplexing ◽  
Transmission Rate ◽  
High Mobility ◽  
System Throughput ◽  
Frequency Division ◽  
High Data ◽  
Single Carrier ◽  
Allocation Method

The goal of LTE (Long Term Evolution) is to provide high data transmission rate, scalable bandwidth, low latency, high-mobility, etc. LTE employs OFDM (Orthogonal Frequency Division Multiplexing) and SC-FDMA (Single Carrier - Frequency Division Multiple Access) for downlink and uplink data transmission, respectively. As to SC-FDMA, there are two constraints in doing resource allocation. First, the allocated resource blocks (RBs) should be contiguous. Second, those of the allocated RBs are forced to use the same modulation technique. The aim of this research is to propose a QoS-constraint resource allocation scheduling to enhance data transmission for uplink SC-FDMA. The proposed scheduling is a three-stage approach. In the first stage, it uses a time domain scheduler to differentiate user equipment (UE) services according to their distinct QoS service requirements. In the second stage, it uses a frequency domain scheduler to prioritize UE services based on channel quality. In the third stage, it limits the number of times of modulation downgrade of RBs allocation in order to enhance system throughput. In the simulations, the proposed method is compared to fixed sub-carrier dynamic resource allocation method and adaptive dynamic sub-carrier resource allocation method. Simulation results show that the proposed method outperforms the other two methods in terms of throughput, transmission delay, packet loss ratio, and RB utilization.

A Novel Reconfigurable Orthogonal Frequency Division Multiplexing Transceiver

2019 ◽  
Vol 16 (2) ◽  
pp. 430-435
Author(s):  
N. Girinath
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
High Speed ◽  
Frequency Division Multiplexing ◽  
Path Delay ◽  
Frequency Division ◽  
Channel Fading ◽  
High Data ◽  
Digital World ◽  
Single Carrier ◽  
Selective Mapping

As the world moves toward 3G/4G there is a need for high data rate and relatively wide bandwidths. OFDM (Orthogonal Frequency Division Multiplexing) a form of multicarrier modulation technique is widely used to achieve high speed efficient data transmission at the rate of several Mbps. It is used in Wi-Fi standards like 802.11a, 802.11n, 802.11ac, broadcast standards like Digital Video Broadcast (DVB) and cellular telecommunications standard LTE. The main advantage of OFDM compared to single carrier modulation is their robustness to channel fading in wireless environment, high baud rates and less inter symbol interference. One major disadvantage is its High PAPR. PTS partial transmit sequences (PTS) and selective mapping are proposed to reduce it. Since FFT is core block of OFDM it must be able to adapt itself to ever changing digital world. A function specific reconfigurable 2k SDF (Single path delay feedback) FFT is proposed. It utilizes less power and can be configured for different FFT sizes ranging from 16-point to 1024-point. The validity and efficiency of the architecture have been verified by simulation in hardware description language VERILOG and targeted on Virtex-6 device. Finally PAPR is estimated by MATLAB simulation.

scholarly journals Mobile Fog Computing-Assisted Resource Allocation for Two-Hop SWIPT OFDM Networks

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Xiaofei Di ◽  
Yu Zhang ◽  
Tong Liu ◽  
Shaoli Kang ◽  
Yue Zhao
Keyword(s):  
Resource Allocation ◽  
Orthogonal Frequency Division Multiplexing ◽  
Fog Computing ◽  
Achievable Rate ◽  
Fast Time ◽  
Power Splitting ◽  
Frequency Division ◽  
Decode And Forward ◽  
Subcarrier Pairing ◽  
Receiver Architecture

The mobile fog computing-assisted resource allocation (RA) is studied for simultaneous wireless information and power transfer (SWIPT) two-hop orthogonal frequency division multiplexing (OFDM) networks, where a decode-and-forward (DF) relay first harvests energy from signals emitted by a source and then helps the source to forward information to its destination by using the harvested energy. Power splitting (PS) strategy is adopted at the relay and a different PS (DPS) receiver architecture is proposed, where the PS factors of all subcarriers are different. A RA problem is formulated to maximize the system’s achievable rate by jointly optimizing subcarrier pairing, power allocation, and PS factors. Since the RA problem is a nonconvex problem and is difficult to solve, an efficient RA algorithm is designed. As the wireless channels are fast time-varying, the computation is performed in mobile fog node close to end nodes, instead of remote clouds. Results demonstrate that the achievable rate is significantly increased by using the proposed RA algorithm. It is also found that the computation complexity of RA algorithm of DPS receiver architecture is much lower than the existing identical PS (IPS) receiver architecture, and thus the proposed DPS architecture is more suitable for computation-constrained fog system.

scholarly journals Channel estimation of OFDM in C-band communication systems under different distribution conditions

2021 ◽  
Vol 23 (3) ◽  
pp. 1778
Author(s):  
Heba Abdul-Jaleel Al-Asady ◽  
Hassan Falah Fakhruldeen ◽  
Mustafa Qahtan Alsudani
Keyword(s):  
Fourier Transform ◽  
Channel Estimation ◽  
Fast Fourier Transform ◽  
Communication Systems ◽  
Orthogonal Frequency Division Multiplexing ◽  
Frequency Division Multiplexing ◽  
Frequency Division ◽  
Ofdm System ◽  
High Data ◽  
High Efficient

<p>Orthogonal frequency division multiplexing (OFDM) is a transmission system that uses multiple orthogonal carriers that are sent out at the same time. OFDM is a technique for mobile and wireless communication that has high-efficient frequency utilization, high data-rate transmission, simple and efficient implementation using the fast Fourier transform (FFT) and the inverse fast Fourier transform (IFFT), and reduces inter symbol interference (ISI) by inserting cyclic prefix (CP). One of the most important approaches in an OFDM system is channel estimation. In this paper, the orthogonal frequency division multiplexing system with the Rayleigh channel module is analyzed for different areas. The proposed approach used large numbers of subcarriers to transmit the signals over 64-QAM modulation with pilot add channel estimation. The accuracy of the OFDM system is shown in the measuring of the relationships of peak power to the noise ratio and bit error rate.</p>

scholarly journals Orthogonal Time Sequency Multiplexing Modulation

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
High Mobility ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Frequency Space ◽  
Time Frequency ◽  
Single Carrier ◽  
The Time Domain

This paper proposes <i>orthogonal time sequency multiplexing</i> (OTSM), a novel single carrier modulation scheme based on the well known Walsh-Hadamard transform (WHT) combined with row-column interleaving, and zero padding (ZP) between blocks in the time-domain. The information symbols in OTSM are multiplexed in the delay and sequency domain using a cascade of time-division and Walsh-Hadamard (sequency) multiplexing. By using the WHT for transmission and reception, the modulation and demodulation steps do not require any complex multiplications. We then propose two low-complexity detectors: (i) a simpler non-iterative detector based on a single tap minimum mean square time-frequency domain equalizer and (ii) an iterative time-domain detector. We demonstrate, via numerical simulations, that the proposed modulation scheme offers high performance gains over orthogonal frequency division multiplexing (OFDM) and exhibits the same performance of orthogonal time frequency space (OTFS) modulation, but with lower complexity. In proposing OTSM, along with simple detection schemes, we offer the lowest complexity solution to achieving reliable communication in high mobility wireless channels, as compared to the available schemes published so far in the literature.

scholarly journals Performance analysis of OFDMA and SC-FDMA

2017 ◽  
Vol 8 (2) ◽  
pp. 113-116 ◽  
Author(s):  
M. Al-Rawi
Keyword(s):  
Carrier Frequency ◽  
Orthogonal Frequency Division Multiplexing ◽  
Multiple Access ◽  
High Speed ◽  
Minimum Mean Square Error ◽  
Frequency Division ◽  
International Telecommunication Union ◽  
Single Carrier ◽  
Main Challenge ◽  
Better Than

The main challenge in any high-speed digital communication system is how to maximize the data rate with minimizing the bit error rate. Several techniques have been developed to achieve this point. Some of these techniques are orthogonal frequency division multiplexing (OFDM), single-carrier frequency domain equalization (SC-FDE), orthogonal frequency division multiple access (OFDMA), and single-carrier frequency division multiple access (SC-FDMA). These four techniques are described briefly in this paper. Also, the paper measures the performances of OFDMA and SC-FDMA systems over international telecommunication union (ITU) vehicular-A channel using minimum mean square error (MMSE) equalization. Simulation results show that the performances with interleaved mapping outperform that with localized mapping. Also, the performances with quadrature phase shift keying (QPSK) are better than that with 16-ary quadrature amplitude modulation (16QAM). In addition, the performance of SC-FDMA is better than that of OFDMA, when QPSK is used, but the latter is little bit better than that of SC-FDMA when 16QAM is used.

Sign in / Sign up

Export Citation Format

Share Document