Study on China’s Debris Flow Distribution and Occurrence Trend

2012 ◽  
Vol 204-208 ◽  
pp. 3345-3350
Author(s):  
Na He ◽  
N.Sh Chen
Keyword(s):  
Debris Flow ◽  
Flow Distribution ◽  
Material Structure ◽  
Monsoon Circulation ◽  
Subtropical Climate ◽  
Clastic Sediment ◽  
Disaster Data ◽  
Before And After ◽  
Debris Flow Disaster ◽  
North Latitude

Debris flow disaster occurred frequently, at the same time it covered a wide area in China. Through statistics analyzing debris flow disaster data from 1914 to 1999, obtain that debris flow hazards mainly distributed in the east longitude 100-110°, 25-30°north latitude and 30-35°north latitude in China. This region is mainly affected by subtropical climate and central Asia humid tropical monsoon climate, such climate have little rainfall in winter but intense rainfall in summer, due to the complex topography and different monsoon circulation, the frequency of debris flow occurrence in this area is much higher than other areas. After the earthquake in May 12, 2008, the slope material structure are destroyed which in turn provide adequate loose clastic-sediment for debris flow to initiate, several years later the loose clastic-sediment may reconsolidate again and reach new balance. Compare the frequency and scale of debris flow before and after the earthquake, know that after earthquake the frequency and scale of debris flow are much serious than the events occurred before earthquake, then gradually tend to stable. Based on these phenomena could predict the scale and trend in the future, at the same time it could provide reference for debris flow prevention and reduction, and then reduce the loss that caused by debris flow hazards.

LEARNING TO ROLL WITH THE ONE-TWO PUNCH OF FIRE AND DEBRIS FLOW: LESSONS LEARNED FROM THE JANUARY 2018 DEBRIS-FLOW DISASTER IN MONTECITO, CA

2018 ◽  
Author(s):  
Jason W. Kean ◽  
◽  
Dennis M. Staley ◽  
Jeremy T. Lancaster ◽  
Francis K. Rengers ◽  
...  
Keyword(s):  
Debris Flow ◽  
Lessons Learned ◽  
The One ◽  
Debris Flow Disaster

Deposition Prediction of Debris Flow Alluvial Fan Based on Experimental Study

2012 ◽  
Vol 518-523 ◽  
pp. 4819-4822
Author(s):  
Jin Feng Liu ◽  
Shun Yang ◽  
Guo Qiang Ou
Keyword(s):  
Experimental Study ◽  
Debris Flow ◽  
Statistical Method ◽  
Laboratory Experiments ◽  
Empirical Models ◽  
Alluvial Fan ◽  
Disaster Prevention ◽  
Average Accuracy ◽  
Hazardous Area ◽  
Debris Flow Disaster

The deposition prediction of debris flow hazardous area is very important for organizing and implementing debris flow disaster prevention and reduction. This paper selected the data base from laboratory experiments and applied the multiple regression statistical method to establish a series of empirical calculation models for delimiting the debris flow hazardous areas on the alluvial fan. The empirical models for predicting the maximum deposition length (Lc), the maximum deposition width (Bmax) and the maximum deposition thichness (Z0) under the condition of different debris flow volumes (V), densities (rm) and slopes of accumulation area (θd) were establised. And the verification results indicated that the established models can predict the debris flow hazards area with the average accuracy of 86%.

The Debris Flow Disaster Faster-Than-Early Forecast System (DFS) with Multi-Sensors Integrated Wireless Sensor Networks

2013 ◽  
Vol 347-350 ◽  
pp. 975-979
Author(s):  
Rong Zhao ◽  
Cai Hong Li ◽  
Yun Jian Tan ◽  
Jun Shi ◽  
Fu Qiang Mu ◽  
...  
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Debris Flow ◽  
Real Time ◽  
Debris Flows ◽  
Base Station ◽  
Base Stations ◽  
Wireless Sensor ◽  
Forecast System ◽  
Debris Flow Disaster

This paper presents a Debris Flow Disaster Faster-than-early Forecast System (DFS) with wireless sensor networks. Debris flows carrying saturated solid materials in water flowing downslope often cause severe damage to the lives and properties in their path. Faster-than-early or faster-than-real-time forecasts are imperative to save lives and reduce damage. This paper presents a novel multi-sensor networks for monitoring debris flows. The main idea is to let these sensors drift with the debris flow, to collect flow information as they move along, and to transmit the collected data to base stations in real time. The Raw data are sent to the cloud processing center from the base station. And the processed data and the video of the debris flow are display on the remote PC. The design of the system address many challenging issues, including cost, deployment efforts, and fast reaction.

scholarly journals Rainfall Information System Based on Weather Radar for Debris Flow Disaster Mitigation

2018 ◽  
Vol 7 (4.44) ◽  
pp. 165 ◽  
Author(s):  
Ratih Indri Hapsari ◽  
Gerard Aponno ◽  
Rosa Andrie Asmara ◽  
Satoru Oishi
Keyword(s):  
Information System ◽  
Debris Flow ◽  
Weather Radar ◽  
Active Volcano ◽  
Radar Data ◽  
Disaster Mitigation ◽  
Web Based ◽  
X Band ◽  
Secondary Hazards ◽  
Debris Flow Disaster

Rainfall-triggered debris flow has caused multiple impacts to the environment. It. is regarded as the most severe secondary hazards of volcanic eruption. However, limited access to the active volcano slope restricts the ground rain measurement as well as the direct delivery of risk information. In this study, an integrated information system is proposed for volcanic-related disaster mitigation under the framework of X-Plore/X-band Polarimetric Radar for Prevention of Water Disaster. In the first part, the acquisition and processing of high-resolution X-band dual polarimetric weather/X-MP radar data in real-time scheme for demonstrating the disaster-prone region are described. The second part presents the design of rainfall resource database and extensive maps coverage of predicted hazard information in GIS web-based platform accessible both using internet and offline. The proposed platform would be useful for communicating the disaster risk prediction based on weather radar in operational setting.  

scholarly journals Analysis of a debris flow after Wenchuan Earthquake and discussion on preventive measures

2019 ◽  
Vol 23 (3 Part A) ◽  
pp. 1563-1570
Author(s):  
Zhi-Long Zhang ◽  
Jing Xie ◽  
De-Ke Yu ◽  
Zhi-Jie Wen
Keyword(s):  
Debris Flow ◽  
Wenchuan Earthquake ◽  
Preventive Measures ◽  
Impact Force ◽  
Site Investigation ◽  
The Wenchuan Earthquake ◽  
Formation Conditions ◽  
National Road ◽  
And Control ◽  
Debris Flow Disaster

This paper addresses a debris flow disaster in Yingxiu town after the Wenchuan earthquake. Through site investigation and data review, the geography and geological environment of the basin and the development, formation conditions and activity characteristics of the debris flow in the basin are analyzed. Calculate and analyze the characteristics of the debris flow, such as gravity, flow velocity and impact force. According to the management idea of combination of blocking and discharging, this paper proposes to arrange three blocking dams in the main ditch, construct drainage gullies in the downstream accumulation section, and prevent and control the aqueduct in the intersection of the main ditch and the G213 national road, which will be similar to the earthquake in the future. It is provided as a reference for research and prevention of the debris flow.

The Otari debris flow disaster occurred in December 1996

2021 ◽  
pp. 1379-1384
Author(s):  
H. Kawakami ◽  
H. Suwa ◽  
H. Marui ◽  
O. Sato ◽  
K. Izumi
Keyword(s):  
Debris Flow ◽  
Debris Flow Disaster

scholarly journals Fusion Analysis of Optical Satellite Images and Digital Elevation Model for Quantifying Volume in Debris Flow Disaster

2019 ◽  
Vol 11 (9) ◽  
pp. 1096 ◽  
Author(s):  
Hiroyuki Miura
Keyword(s):  
Debris Flow ◽  
Digital Elevation Model ◽  
Large Scale ◽  
Satellite Images ◽  
Erosion Depth ◽  
Digital Elevation ◽  
Elevation Model ◽  
Fusion Analysis ◽  
Optical Satellite Images ◽  
Debris Flow Disaster

Rapid identification of affected areas and volumes in a large-scale debris flow disaster is important for early-stage recovery and debris management planning. This study introduces a methodology for fusion analysis of optical satellite images and digital elevation model (DEM) for simplified quantification of volumes in a debris flow event. The LiDAR data, the pre- and post-event Sentinel-2 images and the pre-event DEM in Hiroshima, Japan affected by the debris flow disaster on July 2018 are analyzed in this study. Erosion depth by the debris flows is empirically modeled from the pre- and post-event LiDAR-derived DEMs. Erosion areas are detected from the change detection of the satellite images and the DEM-based debris flow propagation analysis by providing predefined sources. The volumes and their pattern are estimated from the detected erosion areas by multiplying the empirical erosion depth. The result of the volume estimations show good agreement with the LiDAR-derived volumes.

scholarly journals Applications of simulation technique on debris-flow hazard zone delineation: a case study in Hualien County, Taiwan

2010 ◽  
Vol 10 (3) ◽  
pp. 535-545 ◽  
Author(s):  
S. M. Hsu ◽  
L. B. Chiou ◽  
G. F. Lin ◽  
C. H. Chao ◽  
H. Y. Wen ◽  
...  
Keyword(s):  
Debris Flow ◽  
Yield Stress ◽  
Empirical Model ◽  
Water Conservation ◽  
Debris Flows ◽  
Sediment Concentration ◽  
Hazard Zone ◽  
Debris Flow Hazard ◽  
Debris Flow Disaster ◽  
Soil And Water

Abstract. Debris flows pose severe hazards to communities in mountainous areas, often resulting in the loss of life and property. Helping debris-flow-prone communities delineate potential hazard zones provides local authorities with useful information for developing emergency plans and disaster management policies. In 2003, the Soil and Water Conservation Bureau of Taiwan proposed an empirical model to delineate hazard zones for all creeks (1420 in total) with potential of debris flows and utilized the model to help establish a hazard prevention system. However, the model does not fully consider hydrologic and physiographical conditions for a given creek in simulation. The objective of this study is to propose new approaches that can improve hazard zone delineation accuracy and simulate hazard zones in response to different rainfall intensity. In this study, a two-dimensional commercial model FLO-2D, physically based and taking into account the momentum and energy conservation of flow, was used to simulate debris-flow inundated areas. Sensitivity analysis with the model was conducted to determine the main influence parameters which affect debris flow simulation. Results indicate that the roughness coefficient, yield stress and volumetric sediment concentration dominate the computed results. To improve accuracy of the model, the study examined the performance of the rainfall-runoff model of FLO-2D as compared with that of the HSPF (Hydrological Simulation Program Fortran) model, and then the proper values of the significant parameters were evaluated through the calibration process. Results reveal that the HSPF model has a better performance than the FLO-2D model at peak flow and flow recession period, and the volumetric sediment concentration and yield stress can be estimated by the channel slope. The validation of the model for simulating debris-flow hazard zones has been confirmed by a comparison of field evidence from historical debris-flow disaster data. The model can successfully replicate the influence zone of the debris-flow disaster event with an acceptable error and demonstrate a better result than the empirical model adopted by the Soil and Water Conservation Bureau of Taiwan.

Sign in / Sign up

Export Citation Format

Share Document