Slope Stability Analysis of High Rockfill Cofferdam Considered with its Construction and Working Processing

2012 ◽  
Vol 212-213 ◽  
pp. 922-927
Author(s):  
Li Zhe Luo ◽  
Kun Xiong ◽  
Yong Sheng Ou
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Equivalent Stress ◽  
Critical Time ◽  
Slope Stability Analysis ◽  
Construction Process ◽  
Analysis Model ◽  
Dangerous Condition ◽  
Slope Safety

Slope stability of high rockfill cofferdam is related not only to the structure and shape, material characterization, working characteristics of the cofferdam body, but also to the construction process. The influences of rock mechanics parameters are analyzed, which caused by the changes of structural stress state and transfusion equivalent stress in cofferdam construction process. Based on the slope stability strength reduction method, the slope stability analysis model of high rockfill cofferdam mirroring the construction process is established. At the same time, the parameter calculation methods are submitted and the correctness is proved. By the slope stability analysis of construction-running process, the results show that the most dangerous condition of cofferdam slope appears in the period of water level falling after pit excavation finished. With the increase of level falling speed, the position of the cofferdam dangerous sliding surface shifted from downstream slope to upstream slope. When the front weir level falling speed is determinate, the slope safety factor is appearing downward trend firstly and then upward trend, the minimum slope safety factor and the critical time is related with the level felling speed.

scholarly journals Application of Harmony Search Algorithm to Slope Stability Analysis

Land ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1250
Author(s):  
Sina Shaffiee Haghshenas ◽  
Sami Shaffiee Haghshenas ◽  
Zong Woo Geem ◽  
Tae-Hyung Kim ◽  
Reza Mikaeil ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Search Algorithm ◽  
Limit Equilibrium ◽  
Harmony Search ◽  
Harmony Search Algorithm ◽  
Slope Stability Analysis ◽  
Unit Weight ◽  
Slope Safety

Slope stability analysis is undoubtedly one of the most complex problems in geotechnical engineering and its study plays a paramount role in mitigating the risk associated with the occurrence of a landslide. This problem is commonly tackled by using limit equilibrium methods or advanced numerical techniques to assess the slope safety factor or, sometimes, even the displacement field of the slope. In this study, as an alternative approach, an attempt to assess the stability condition of homogeneous slopes was made using a machine learning (ML) technique. Specifically, a meta-heuristic algorithm (Harmony Search (HS) algorithm) and K-means algorithm were employed to perform a clustering analysis by considering two different classes, depending on whether a slope was unstable or stable. To achieve the purpose of this study, a database made up of 19 case studies with 6 model inputs including unit weight, intercept cohesion, angle of shearing resistance, slope angle, slope height and pore pressure ratio and one output (i.e., the slope safety factor) was established. Referring to this database, 17 out of 19 slopes were categorized correctly. Moreover, the obtained results showed that, referring to the considered database, the intercept cohesion was the most significant parameter in defining the class of each slope, whereas the unit weight had the smallest influence. Finally, the obtained results showed that the Harmony Search algorithm is an efficient approach for training K-means algorithms.

Limit equilibrium slope stability analysis using the nonlinear strength failure criterion

2015 ◽  
Vol 52 (5) ◽  
pp. 563-576 ◽  
Author(s):  
Dong-ping Deng ◽  
Lian-heng Zhao ◽  
Liang Li
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Failure Criterion ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Current Method ◽  
Slope Stability Analysis ◽  
Strength Failure ◽  
Slope Safety

The limit equilibrium stability analysis of two- and three-dimensional slopes with the nonlinear failure strength criterion uses a number of variables to determine the normal and shear stress on the slip surface. The equation for the nonlinear strength failure criterion is expressed using a Taylor series after analyzing the stress of an elemental slice or column. Multivariate linear equations are then derived to determine these variables based on the force and moment equilibrium conditions the sliding body is subject to. The stress on the slip surface can also be obtained to calculate the slope safety factor. The validity of the current method was verified by comparing it with established examples. Charts were produced for slope stability analysis with the nonlinear strength failure criterion under general conditions using the current method. The results of this study show that the slope safety factor decreases with an increase in the geotechnical material parameter m in the nonlinear strength failure criterion. The results of the current method are in close correspondence with other traditional limit equilibrium methods and are more reliable than the Swedish method. The charts can be used to determine slope design parameters that meet specific requirements.

Slope Stability Analysis of Elastic Limit Equilibrium Method

2013 ◽  
Vol 275-277 ◽  
pp. 1423-1426
Author(s):  
Lin Kuang ◽  
Ai Zhong Lv ◽  
Yu Zhou
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Slope Stability Analysis ◽  
Sliding Surface ◽  
Tangential Stresses ◽  
Equilibrium Method

Based on finite element analysis software ANSYS, slope stability analysis is carried out by Elastic limiting equilibrium method proposed in this paper. A series of sliding surface of the slope can be assumed firstly, and then stress field along the sliding surface is analyzed as the slope is in elastic state. The normal and tangential stresses along each sliding surface can be obtained, respectively. Then the safety factor for each slip surface can be calculated, the slip surface which the safety factor is smallest is the most dangerous sliding surface. This method is different from the previous limit equilibrium method. For the previous limit equilibrium method, the normal and tangential stresses along the sliding surface are calculated based on many assumptions. While, the limit equilibrium method proposed in this paper has fewer assumptions and clear physical meaning.

scholarly journals ANALISIS KESTABILAN LERENG HIGHWALL MENGGUNAKAN METODE BISHOP SIMPLIFIED PADA PIT 13 PT BELAYAN INTERNASIONAL COAL KECAMATAN MARANGKAYU KABUPATEN KUTAI KARTANEGARA

2021 ◽  
pp. 46-54
Author(s):  
Muhammad Amin Syam ◽  
Heriyanto Heriyanto ◽  
Hamzah Umar
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slope Angle ◽  
Stable Condition ◽  
Physical And Mechanical Properties ◽  
Slope Stability Analysis ◽  
Open Pit ◽  
Mining Company ◽  
Water Saturated

PT Belayan Internasional Coal is an open-pit system mining company, one of its geotechnical activities is the construction of the slopes. Slope stability analysis used the Bishop Simplified method to obtain the value of the dynamic safety factor (≥ 1,1). Currently, the value of the Safety Factor (FK) is an indicator in determining whether the slope is stable or not. The parameters used in the slope stability analysis are the physical and mechanical properties of the rock, namely weight (ɣ), cohesion value (c), and internal shear angle (∅). From the results of dynamic overall slope calculations, the recommended overall slope is constructed with an individual slope angle of 55°, a bench width of 5 meters, a height of 10 meters, and the number of individual slopes of 8 slopes. This design will produce dimensions of the overall slope with 41° slope angle, 80 meters high, and has a dynamic safety factor value of 1,102 with the water-saturated condition. Thus, the slopes are in stable condition.

A Comparative Study on Locating Critical Slip Surface in 2D and 3D Limit Equilibrium Stability Analysis of Slopes

2012 ◽  
Vol 446-449 ◽  
pp. 1905-1913
Author(s):  
Mo Wen Xie ◽  
Zeng Fu Wang ◽  
Xiang Yu Liu ◽  
Ning Jia
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Three Dimensional ◽  
Slope Stability Analysis ◽  
Equilibrium Stability ◽  
Critical Slip Surface ◽  
Minimum Safety Factor

The Various methods of optimization or random search have been developed for locating the critical slip surface of a slope and the related minimum safety factor in the limit equilibrium stability analysis of slope. But all these methods are based on a two-dimensional (2D) method and no one had been adapted for a search of the three-dimensional (3D) critical slip surface. In this paper, a new Monte Carlo random simulating method has been proposed to identify the 3D critical slip surface, in which assuming the initial slip to be the lower part of an ellipsoid, the 3D critical slip surface in the 3D slope stability analysis is located by minimizing the 3D safety factor of limit equilibrium approach. Based on the column-based three-dimensional limit equilibrium slope stability analysis models, new Geographic Information Systems (GIS) grid-based 3D deterministic limit equilibrium models are developed to calculate the 3D safety factors. Several practical examples, of obtained minimum safety factor and its critical slip surface by a 2D optimization or random technique, are extended to 3D slope problems to locate the 3D critical slip surface and to compare with the 2D results. The results shows that, comparing with the 2D results, the resulting 3D critical slip surface has no apparent difference only from a cross section, but the associated 3D safety factor is definitely higher.

scholarly journals Faktor Keamanan Stabilitas Lereng pada Kondisi Eksisting dan Setelah Diperkuat Dinding Penahan Tanah Tipe Counterfort dengan Program Plaxis

2019 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Rizki Ramadhan ◽  
Munirwansyah Munirwansyah ◽  
Munira Sungkar
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slope Failure ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Slope Stability Analysis ◽  
Safety Factors ◽  
Failure Patterns ◽  
Volume Weight

The Aceh Tengah / Gayo Lues-Blangkejeren road segment (N.022) Km 438 + 775 is one of the Central Cross National Roads in the Province of Aceh, which often experiences landslides due to being in hilly areas. Landslides that occur in these locations are caused by scouring of road runoff, lack of optimal drainage and the absence of outlets for drainage and soil layers under asphalt pavement consisting of loose material. Therefore, a slope reinforcement study with Counterfort type retaining wall is needed. This study aims to analyze slope stability by obtaining safety factor numbers and identifying slope failure patterns. Analysis was carried out to obtain safety factors and slope failure patterns by using 2D Plaxis and slice methods. The calculation of safety factors for Counterfort type retaining walls is done manually. The input soil parameters used are dry volume weight (gd), wet volume weight (gw), permeability (k), modulus young (Eref), paisson's ratio (υ), shear angle (f), cohesion (c) . The results of slope stability analysis on the existing conditions using the Plaxis program and the slice method with radius (r) 65.06 meters found that safety factors were 1.038 and 1.079 with unsafe slope conditions (FK <1.25). The results of the analysis after reinforced counterfort and minipile type retaining wall with a length of 12 meters found 1,268 safety factor numbers with unsafe slope conditions (FK <1,5). Thus, additional reinforcement is needed by using anchor on the counterfort. The results of slope stability analysis after reinforced counterfort, minipile and anchor type retaining walls with a length of 20 meters and a slope of 30 ° were obtained with a safety factor number of 1.513 with safe slope conditions (SF> 1.5).ABSTRAKRuas jalan batas Aceh Tengah/Gayo Lues-Blangkejeren (N.022) Km 438+775 merupakan salah satu ruas jalan Nasional Lintas Tengah Provinsi Aceh, yang sering mengalami terjadi tanah longsor karena berada di daerah perbukitan. Longsoran yang terjadi pada lokasi tersebut disebabkan oleh gerusan air limpasan permukaan jalan, kurang optimalnya drainase dan tidak adanya outlet untuk pembuangan air serta lapisan tanah di bawah perkerasan aspal terdiri dari material lepas. Oleh karena itu, diperlukan kajian perkuatan lereng dengan dinding penahan tanah tipe Counterfort. Kajian ini bertujuan untuk menganalisis stabilitas lereng dengan mendapatkan angka faktor keamanan dan mengidentifikasi pola keruntuhan lereng. Analisis dilakukan untuk mendapatkan faktor keamanan dan pola keruntuhan lereng yaitu dengan menggunakan program Plaxis 2D dan metode irisan. Perhitungan faktor keamanan untuk dinding penahan tanah tipe Counterfort dilakukan secara manual. Adapun parameter  tanah input yang digunakan adalah berat volume kering (gd), berat volume basah (gw), permeabilitas (k), modulus young (Eref), paisson’s rasio (υ), sudut geser (f), kohesi (c). Hasil analisis stabilitas lereng pada kondisi eksisting menggunakan program Plaxis dan metode irisan dengan jari-jari (r) 65,06 meter didapatkan akan faktor keamanan sebesar 1,038 dan 1,079 dengan kondisi lereng tidak aman (FK < 1,25). Hasil analisis setelah diperkuat dinding penahan tanah tipe counterfort dan minipile dengan panjang 12 meter didapatkan angka faktor keamanan 1,268 dengan kondisi lereng tidak aman (FK < 1,5). Dengan demikian, maka diperlukan perkuatan tambahan dengan menggunakan angkur pada counterfort. Hasil analisis stabilitas lereng setelah diperkuat dinding penahan tanah tipe counterfort, minipile dan angkur dengan panjang 20 meter serta sudut kemiringan 30° didapatkan angka faktor keamanan 1,513 dengan kondisi lereng aman (SF > 1,5).Kata kunci : longsoran; counterfort; plaxis 2D; faktor keamanan.

scholarly journals ANALISIS KESTABILAN LERENG DENGAN SOFTWARE ROCSCIENCE SLIDE

2018 ◽  
Author(s):  
Darmadi Ir
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Case Studies ◽  
Safety Factor ◽  
Factor Of Safety ◽  
Slope Angle ◽  
Maximum Load ◽  
Slope Stability Analysis

Abstract Slope stability analysis with SOFTWARE ROCSCIENCE SLIDE case studies in residential barracks of PT. Freport with various variations in loading and conditions show results The greater the load on the slope, the lower the Factor of Safety value. FS values for all methods, sections, and ramp widths are greater in dry than wet conditions. The greater the load distance from the slope, the greater the FS value. At a distance of 3m from the crest slope the decrease in FS value is very significant, in sections 1 and 2 there is still a secure FS value with a load of 50 kN / m, the smaller the overall slope angle (slope) the greater the FS value.Keywords: Slope stability, safety factor, maximum load

scholarly journals Slope Stability Analysis Based on Safety Factors on Slope CV. Mutiara Timur in Klampok Village, Tongas District, Probolinggo Regency

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Yazid Fanani ◽  
Aprilia Dwi Astuti ◽  
Andres Kevi Paki
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slope Stability Analysis ◽  
Open Pit ◽  
Open Pit Mining ◽  
Mining System ◽  
A Company ◽  
Rock Lithology ◽  
Safe Working

CV. Mutiara Timur is a company that is applying for a mining business permit for sirtu commodities in Klampok Village, Tongas District, Probolinggo Regency. The planned mining system is open pit mining using the quarry method. From the results of research in the field obtained rock lithology in the form of topsoil, gravel and sand. Where in the slope design later, the topsoil will be peeled off first. The purpose of slope stability analysis is to determine the geometry of the slope by taking into account the safety factor in order to create safe working conditions. Slope stability analysis on CV. Mutiara Timur using the Bishop method using the Slide v6.0 software. Based on the analysis carried out, the recommendation for slope geometry on a single slope is 4 meters high with a slope of 600 so that the no-load safety factor is 1.350 and the safety factor with load is 1.267. In addition, the slope geometry is obtained on the overall slope, which is a total height of 21 meters with a slope of 380 so that the no-load safety factor is 1.243 and the safety factor with the load is 1.239.

scholarly journals Slope Stability Analysis Under Pore-Water Pressure: A Case Study in Zarm-Rood Earthfill Dam, Iran

2021 ◽  
Author(s):  
Mojtaba Gholamzade ◽  
Ahad Bagherzadeh Khalkhali
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Pore Water ◽  
Safety Factor ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Slope Stability Analysis ◽  
Operating Conditions ◽  
Successful Implementation ◽  
The Stability

Abstract It is well known that construction of dams or reservoirs have geomorphological impacts on the environment and could potentially accelerate the occurrence of landslides. One of the most common impact is the occurrence of new landslides and activation of the old one, which may turn into a natural disaster. Thus, controlling the stability of landslides become challenging issue specifically in the presence of f pore-water pressure. In general, the presence of water or pore-water pressure reduces the soil resistance and also leads to increase in stimulus loads, resulting in reduction of stability coefficients. In the present study, using GeoStudio SLOPE/W software, the effect of the proximity of the dam reservoir in terms of different operating conditions on the stability analysis of the landslide area of ​​Zarm-Rood Dam is investigated. In the first step, the evaluation of internal stability of landslides and the effect of the presence of water on stability coefficients were evaluated and then the sustainable design of landslides was proposed. It was found that when extra pore-water pressure ranges from 0.2 to 0.4, safety factor is decreased by about 10%. Accordingly, safety factor is decreased by about 17% when extra pore-water pressure range from 0.4 to 0.6. This research demonstrates successful implementation of GeoStudio SLOPE/W for slope stability analysis in dam construction projects.

Sign in / Sign up

Export Citation Format

Share Document