Design of an Optical Mechanical System for High-Resolution Encoders

2013 ◽  
Vol 284-287 ◽  
pp. 2711-2716
Author(s):  
Yi Hua Fan ◽  
Ching En Chen ◽  
Liao Yong Lou ◽  
Chun Yu Chen

An optical mechanism composed of a movable part and a fixed part for the increment high-resolution optical displacement encoders is proposed in this paper. The parallel light emitted from the movable part passes through a double-concave lens and a specially designed optical grating; it is then projected onto a phototransistor array receiver to indicate the displacement of the movable part. The relationship equation of the lens is developed to design an optical mechanism which can enlarge the displacement so that it becomes observable. Based upon the simulation results, a specially designed optical grating is designed to compensate for the deviations on the detecting surface and to derive the increment movement of the light source. The simulation results indicated that the optical mechanism with 50 times magnification could make the 10 nm movement intervals of a light source be about 500 nm movement intervals in the detecting surface. Furthermore, an experimental system with a 200 nm resolution is established to verify the possibility of the proposed structure.

2010 ◽  
Vol 447-448 ◽  
pp. 579-583
Author(s):  
Yi Hua Fan ◽  
Ying Tsun Lee ◽  
Chun Yu Chen ◽  
Yi Lin Liao ◽  
Ching En Chen

A novel optical displacement encoder was proposed in this paper. An optical mechanism was designed by the equations of thick lens to change and modify the paths of light, and then to get a more visible position change in the optical detector to improve the measurement accuracy. The simulation results indicated that the optical mechanism with 5 mm stroke, which the lens radii of curvature of the incident and the exit surface on the lens were -0.625 cm and 1.25 cm, respectively, and the magnification was 50 times in imaging distance of 38 cm, could make the 1 nm movement intervals of light source to be about 50 nm movement intervals in the detecting surface. Thus we can combine the optical mechanism and a photo-detector array with 50 nm resolution and 25 cm total detecting length to form the optical displacement encoder with 1 nm measuring accuracy.


Author(s):  
Robert M. Glaeser

It is well known that a large flux of electrons must pass through a specimen in order to obtain a high resolution image while a smaller particle flux is satisfactory for a low resolution image. The minimum particle flux that is required depends upon the contrast in the image and the signal-to-noise (S/N) ratio at which the data are considered acceptable. For a given S/N associated with statistical fluxtuations, the relationship between contrast and “counting statistics” is s131_eqn1, where C = contrast; r2 is the area of a picture element corresponding to the resolution, r; N is the number of electrons incident per unit area of the specimen; f is the fraction of electrons that contribute to formation of the image, relative to the total number of electrons incident upon the object.


Author(s):  
D. F. Blake ◽  
L. F. Allard ◽  
D. R. Peacor

Echinodermata is a phylum of marine invertebrates which has been extant since Cambrian time (c.a. 500 m.y. before the present). Modern examples of echinoderms include sea urchins, sea stars, and sea lilies (crinoids). The endoskeletons of echinoderms are composed of plates or ossicles (Fig. 1) which are with few exceptions, porous, single crystals of high-magnesian calcite. Despite their single crystal nature, fracture surfaces do not exhibit the near-perfect {10.4} cleavage characteristic of inorganic calcite. This paradoxical mix of biogenic and inorganic features has prompted much recent work on echinoderm skeletal crystallography. Furthermore, fossil echinoderm hard parts comprise a volumetrically significant portion of some marine limestones sequences. The ultrastructural and microchemical characterization of modern skeletal material should lend insight into: 1). The nature of the biogenic processes involved, for example, the relationship of Mg heterogeneity to morphological and structural features in modern echinoderm material, and 2). The nature of the diagenetic changes undergone by their ancient, fossilized counterparts. In this study, high resolution TEM (HRTEM), high voltage TEM (HVTEM), and STEM microanalysis are used to characterize tha ultrastructural and microchemical composition of skeletal elements of the modern crinoid Neocrinus blakei.


Author(s):  
P. A. Marsh ◽  
T. Mullens ◽  
D. Price

It is possible to exceed the guaranteed resolution on most electron microscopes by careful attention to microscope parameters essential for high resolution work. While our experience is related to a Philips EM-200, we hope that some of these comments will apply to all electron microscopes.The first considerations are vibration and magnetic fields. These are usually measured at the pre-installation survey and must be within specifications. It has been our experience, however, that these factors can be greatly influenced by the new facilities and therefore must be rechecked after the installation is completed. The relationship between the resolving power of an EM-200 and the maximum tolerable low frequency interference fields in milli-Oerstedt is 10 Å - 1.9, 8 Å - 1.4, 6 Å - 0.8.


2019 ◽  
Vol 2 (1) ◽  
pp. 10402-1-10402-11
Author(s):  
Midori Tanaka ◽  
Takahiko Horiuchi ◽  
Ken’ichi Otani

Abstract A planetarium imitates a starry sky with physical and technical limitations using a dome, projector, and light source. It is widely used for entertainment, and astronomy and physics educations. In our previous study, we investigated the evaluation for faithful reproduction of a star field in a planetarium by performing psychometric experiments with 20 observers for plural projection patterns with different reproduction factors (color, luminance, and size of projected stars). In this study, we investigate the relationship between faithfulness and preference of a star field in a planetarium through a psychometric experiment with 47 observers. The experimental procedure followed the previous study. The rating of faithfulness improved for the projection pattern with a smaller star size. For the preference evaluation, the projection pattern with low luminance significantly lowered the preference rating. The results of the experiment indicate that the preferable star reproduction was different between male and female observers, whereas the faithful star reproduction was not significantly different in the evaluations between male and female observers. The male observers sought a faithful star reproduction as the preferred reproduction. In contrast, the female observers did not feel the faithful star reproduction preferable, and evaluated the more brilliant star reproduction as the preferred reproduction. These results were not dependent on the experience in astronomical observations.


2020 ◽  
Vol 132 (5) ◽  
pp. 1358-1366
Author(s):  
Chao-Hung Kuo ◽  
Timothy M. Blakely ◽  
Jeremiah D. Wander ◽  
Devapratim Sarma ◽  
Jing Wu ◽  
...  

OBJECTIVEThe activation of the sensorimotor cortex as measured by electrocorticographic (ECoG) signals has been correlated with contralateral hand movements in humans, as precisely as the level of individual digits. However, the relationship between individual and multiple synergistic finger movements and the neural signal as detected by ECoG has not been fully explored. The authors used intraoperative high-resolution micro-ECoG (µECoG) on the sensorimotor cortex to link neural signals to finger movements across several context-specific motor tasks.METHODSThree neurosurgical patients with cortical lesions over eloquent regions participated. During awake craniotomy, a sensorimotor cortex area of hand movement was localized by high-frequency responses measured by an 8 × 8 µECoG grid of 3-mm interelectrode spacing. Patients performed a flexion movement of the thumb or index finger, or a pinch movement of both, based on a visual cue. High-gamma (HG; 70–230 Hz) filtered µECoG was used to identify dominant electrodes associated with thumb and index movement. Hand movements were recorded by a dataglove simultaneously with µECoG recording.RESULTSIn all 3 patients, the electrodes controlling thumb and index finger movements were identifiable approximately 3–6-mm apart by the HG-filtered µECoG signal. For HG power of cortical activation measured with µECoG, the thumb and index signals in the pinch movement were similar to those observed during thumb-only and index-only movement, respectively (all p > 0.05). Index finger movements, measured by the dataglove joint angles, were similar in both the index-only and pinch movements (p > 0.05). However, despite similar activation across the conditions, markedly decreased thumb movement was observed in pinch relative to independent thumb-only movement (all p < 0.05).CONCLUSIONSHG-filtered µECoG signals effectively identify dominant regions associated with thumb and index finger movement. For pinch, the µECoG signal comprises a combination of the signals from individual thumb and index movements. However, while the relationship between the index finger joint angle and HG-filtered signal remains consistent between conditions, there is not a fixed relationship for thumb movement. Although the HG-filtered µECoG signal is similar in both thumb-only and pinch conditions, the actual thumb movement is markedly smaller in the pinch condition than in the thumb-only condition. This implies a nonlinear relationship between the cortical signal and the motor output for some, but importantly not all, movement types. This analysis provides insight into the tuning of the motor cortex toward specific types of motor behaviors.


2013 ◽  
Vol 69 (11) ◽  
pp. 1221-1224 ◽  
Author(s):  
Fangfang Pan ◽  
Irmgard Kalf ◽  
Ulli Englert

Diffraction results obtained at 100 and 291 K, the former at high resolution, are reported for the title compound, [Cu(C10H9N4O2S)2(NH3)2] or [Cu(sulfa)2(NH3)2] [Hsulfa is 4-amino-N-(pyrimidin-2-yl)benzenesulfonamide]. The CuIIcation is coordinated by two N-atom donors from a bidentate sulfa ligand, by two ammonia molecules in the equatorial plane and by a monohapto (η1) sulfadiazine at the apex of a distorted square pyramid. The present interpretation and two earlier reports [Brown, Cook & Sengier (1987).Acta Cryst.C43, 2332–2334; Tommasino, Renaud, Luneau & Pilet (2011).Polyhedron,30, 1663–1670] disagree about the nature and geometry of the ligands. The relationship between the present result and the former is discussed, and evidence is provided that the latter erroneously assigned an ammine as an aqua ligand.


2008 ◽  
Vol 07 (01) ◽  
pp. 151-155 ◽  
Author(s):  
AKIRA INOUE ◽  
MINGCONG DENG

A fault detection problem in a process control experimental system with unknown factors is presented in this paper. The fault detecting method is based on blind system identification approach. The experimental system actuator output includes unknown dynamics and unknown fault signal. By using the fault detecting method, the fault signal is detected. Simulation results for the experimental process are presented to show the effectiveness.


1997 ◽  
Vol 68 (5) ◽  
pp. 1945-1951 ◽  
Author(s):  
P. A. Heimann ◽  
M. Koike ◽  
C. W. Hsu ◽  
D. Blank ◽  
X. M. Yang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document