Cigarette Filter Rod Parameter Measure Based on Otsu Image Processing

2013 ◽  
Vol 341-342 ◽  
pp. 635-639
Author(s):  
Shu Bin Yang ◽  
Lu Jin ◽  
Ling Han Zhang ◽  
Shu Long Fu
Keyword(s):  
Image Processing ◽  
Feature Extraction ◽  
Absolute Error ◽  
Segmentation Method ◽  
Target Image ◽  
Target Feature ◽  
Cigarette Filter

Traditional contacting measure method can easily cause cigarette filter rod distortion and needs long measure time. Its measure precision is difficult to satisfy practice demand and it cannot implement online measure. In order to overcome these shortages, imaging measure technology is used to measure cigarette filter rod parameters. Firstly, preprocessing filtering is operated on the image acquired from imaging measure system. Then binary cigarette filter rod target image is obtained through Otsu segmentation method. After that target feature extraction is processed and correlative parameters of cigarette filter rod are gained. Parameters measuring absolute error for two images which are acquired from the same cigarette filter rod under different illumination is 0.683%. Experiment proves that the proposed method can rapidly and correctly measure cigarette filter rod and has good robust and adaptability. It can effectively measure cigarette filter rod in practice.

FEATURE EXTRACTION BY RANK-ORDER FILTERING FOR IMAGE SEGMENTATION

1988 ◽  
Vol 02 (02) ◽  
pp. 301-319 ◽  
Author(s):  
P. ZAMPERONI
Keyword(s):  
Image Processing ◽  
Feature Extraction ◽  
Image Segmentation ◽  
Density Function ◽  
Rank Order ◽  
Experimental Results ◽  
Textural Features ◽  
Segmentation Method ◽  
Unified Approach

The aim of this paper is to outline a unified approach to feature extraction for segmentation purposes by means of the rank-order filtering of grey values in a neighbourhood of each pixel of a digitized image. In the first section an overview of rank-order filtering for image processing is given, and a fast histogram algorithm is proposed. Section 2 deals with the extraction of a “locally most representative grey value”, defined as the maximum of the local histogram density function. In Section 3 several textural features are described, which can be extracted from the local histogram by means of rank-order filtering, and their properties are discussed. Section 4 formulates some general requirements to be met by the process of image segmentation, and describes a method based upon the features introduced in the former sections. In the last section some experimental results applied to aerial views obtained with the segmentation method of Sect. 4 are reported. These test images have been analyzed within the scope of an investigation centered on terrain recognition for agricultural and ecological purposes.

Cigarette Filter Rod Measure Based on Morphological Image Processing

2012 ◽  
Vol 538-541 ◽  
pp. 2121-2124
Author(s):  
Yuan Feng Huang ◽  
Di Feng Zhang ◽  
De Wen Guo ◽  
Shu Bin Yang
Keyword(s):  
Absolute Error ◽  
Morphological Processing ◽  
Target Image ◽  
Cigarette Filter ◽  
Morphological Image Processing ◽  
Sobel Operator ◽  
Correlation Parameters ◽  
Binary Filter ◽  
Morphological Image ◽  
High Measure

Traditional touch measure method has the shortages of easily distorting cigarette filter rod, long measure time, not high measure precision and not online implementing. In order to overcome these, imaging measure technology is used to measure it. Firstly, preprocessing filtering is operated on the acquired image. Then sobel operator is used to detect the edge and binary filter rod target image is obtained through morphological processing after falsehood edge eliminating. After that correlation parameters are gained. Parameters measuring absolute error for two images acquired from the same filter rod under different illumination is 1.848%. Experiment proves that the proposed method can rapidly and correctly measure cigarette filter rod. It can effectively measure filter rod in practice.

A Hierarchical Target Recognition Method Based on Image Processing

2017 ◽  
pp. 91-107
Author(s):  
QingE Wu ◽  
Weidong Yang
Keyword(s):  
Image Processing ◽  
Feature Extraction ◽  
Target Recognition ◽  
Wavelet Packet ◽  
Recognition Rate ◽  
Image Decomposition ◽  
Extraction Process ◽  
Practical Significance ◽  
Recognition Method ◽  
Target Feature

In order to provide an accurate and rapid target recognition method for some military affairs, public security, finance and other departments, this paper studies firstly a variety of fuzzy signal, analyzes the uncertainties classification and their influence, eliminates fuzziness processing, presents some methods and algorithms for fuzzy signal processing, and compares with other methods on image processing. Moreover, this paper uses the wavelet packet analysis to carry out feature extraction of target for the first time, extracts the coefficient feature and energy feature of wavelet transformation, gives the matching and recognition methods, compares with the existing target recognition methods by experiment, and presents the hierarchical recognition method. In target feature extraction process, the more detailed and rich texture feature of target can be obtained by wavelet packet to image decomposition to compare with the wavelet decomposition. In the process of matching and recognition, the hierarchical recognition method is presented to improve the recognition speed and accuracy. The wavelet packet transformation is used to carry out the image decomposition. Through experiment results, the proposed recognition method has the high precision, fast speed, and its correct recognition rate is improved by an average 6.13% than that of existing recognition methods. These researches development in this paper can provide an important theoretical reference and practical significance to improve the real-time and accuracy on fuzzy target recognition.

A Hierarchical Target Recognition Method Based on Image Processing

2018 ◽  
pp. 494-510
Author(s):  
QingE Wu ◽  
Weidong Yang
Keyword(s):  
Image Processing ◽  
Feature Extraction ◽  
Target Recognition ◽  
Wavelet Packet ◽  
Recognition Rate ◽  
Image Decomposition ◽  
Extraction Process ◽  
Practical Significance ◽  
Recognition Method ◽  
Target Feature

In order to provide an accurate and rapid target recognition method for some military affairs, public security, finance and other departments, this paper studies firstly a variety of fuzzy signal, analyzes the uncertainties classification and their influence, eliminates fuzziness processing, presents some methods and algorithms for fuzzy signal processing, and compares with other methods on image processing. Moreover, this paper uses the wavelet packet analysis to carry out feature extraction of target for the first time, extracts the coefficient feature and energy feature of wavelet transformation, gives the matching and recognition methods, compares with the existing target recognition methods by experiment, and presents the hierarchical recognition method. In target feature extraction process, the more detailed and rich texture feature of target can be obtained by wavelet packet to image decomposition to compare with the wavelet decomposition. In the process of matching and recognition, the hierarchical recognition method is presented to improve the recognition speed and accuracy. The wavelet packet transformation is used to carry out the image decomposition. Through experiment results, the proposed recognition method has the high precision, fast speed, and its correct recognition rate is improved by an average 6.13% than that of existing recognition methods. These researches development in this paper can provide an important theoretical reference and practical significance to improve the real-time and accuracy on fuzzy target recognition.

scholarly journals Underwater Acoustic Target Recognition Based on Depthwise Separable Convolution Neural Networks

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1429
Author(s):  
Gang Hu ◽  
Kejun Wang ◽  
Liangliang Liu
Keyword(s):  
Feature Extraction ◽  
Target Recognition ◽  
Target Feature ◽  
Underwater Acoustic ◽  
Radiated Noise ◽  
Automatic Feature Extraction ◽  
Acoustic Target ◽  
And Cluster Analysis ◽  
Underwater Target ◽  
The One

Facing the complex marine environment, it is extremely challenging to conduct underwater acoustic target feature extraction and recognition using ship-radiated noise. In this paper, firstly, taking the one-dimensional time-domain raw signal of the ship as the input of the model, a new deep neural network model for underwater target recognition is proposed. Depthwise separable convolution and time-dilated convolution are used for passive underwater acoustic target recognition for the first time. The proposed model realizes automatic feature extraction from the raw data of ship radiated noise and temporal attention in the process of underwater target recognition. Secondly, the measured data are used to evaluate the model, and cluster analysis and visualization analysis are performed based on the features extracted from the model. The results show that the features extracted from the model have good characteristics of intra-class aggregation and inter-class separation. Furthermore, the cross-folding model is used to verify that there is no overfitting in the model, which improves the generalization ability of the model. Finally, the model is compared with traditional underwater acoustic target recognition, and its accuracy is significantly improved by 6.8%.

scholarly journals Unknown SAR Target Identification Method Based on Feature Extraction Network and KLD–RPA Joint Discrimination

2021 ◽  
Vol 13 (15) ◽  
pp. 2901
Author(s):  
Zhiqiang Zeng ◽  
Jinping Sun ◽  
Congan Xu ◽  
Haiyang Wang
Keyword(s):  
Feature Extraction ◽  
Position Angle ◽  
Automatic Target Recognition ◽  
Identification Accuracy ◽  
Training Dataset ◽  
Target Feature ◽  
Practical Applications ◽  
Feature Vectors ◽  
Identification Method ◽  
Leibler Divergence

Recently, deep learning (DL) has been successfully applied in automatic target recognition (ATR) tasks of synthetic aperture radar (SAR) images. However, limited by the lack of SAR image target datasets and the high cost of labeling, these existing DL based approaches can only accurately recognize the target in the training dataset. Therefore, high precision identification of unknown SAR targets in practical applications is one of the important capabilities that the SAR–ATR system should equip. To this end, we propose a novel DL based identification method for unknown SAR targets with joint discrimination. First of all, the feature extraction network (FEN) trained on a limited dataset is used to extract the SAR target features, and then the unknown targets are roughly identified from the known targets by computing the Kullback–Leibler divergence (KLD) of the target feature vectors. For the targets that cannot be distinguished by KLD, their feature vectors perform t-distributed stochastic neighbor embedding (t-SNE) dimensionality reduction processing to calculate the relative position angle (RPA). Finally, the known and unknown targets are finely identified based on RPA. Experimental results conducted on the MSTAR dataset demonstrate that the proposed method can achieve higher identification accuracy of unknown SAR targets than existing methods while maintaining high recognition accuracy of known targets.

scholarly journals An Efficient Module for Instance Segmentation Based on Multi-Level Features and Attention Mechanisms

2021 ◽  
Vol 11 (3) ◽  
pp. 968
Author(s):  
Yingchun Sun ◽  
Wang Gao ◽  
Shuguo Pan ◽  
Tao Zhao ◽  
Yahui Peng
Keyword(s):  
Feature Extraction ◽  
Spatial Structure ◽  
Semantic Feature ◽  
Semantic Features ◽  
Segmentation Method ◽  
Spatial Dimensions ◽  
Feature Pyramid ◽  
Multi Level ◽  
High Level ◽  
Instance Segmentation

Recently, multi-level feature networks have been extensively used in instance segmentation. However, because not all features are beneficial to instance segmentation tasks, the performance of networks cannot be adequately improved by synthesizing multi-level convolutional features indiscriminately. In order to solve the problem, an attention-based feature pyramid module (AFPM) is proposed, which integrates the attention mechanism on the basis of a multi-level feature pyramid network to efficiently and pertinently extract the high-level semantic features and low-level spatial structure features; for instance, segmentation. Firstly, we adopt a convolutional block attention module (CBAM) into feature extraction, and sequentially generate attention maps which focus on instance-related features along the channel and spatial dimensions. Secondly, we build inter-dimensional dependencies through a convolutional triplet attention module (CTAM) in lateral attention connections, which is used to propagate a helpful semantic feature map and filter redundant informative features irrelevant to instance objects. Finally, we construct branches for feature enhancement to strengthen detailed information to boost the entire feature hierarchy of the network. The experimental results on the Cityscapes dataset manifest that the proposed module outperforms other excellent methods under different evaluation metrics and effectively upgrades the performance of the instance segmentation method.

Analisis Algoritma Shi-Tomasi Dalam Pengujian Citra Senyum Pada Wajah Manusia

2021 ◽  
Vol 5 (6) ◽  
pp. 1036-1043
Author(s):  
Ardi wijaya ◽  
Puji Rahayu ◽  
Rozali Toyib
Keyword(s):  
Image Processing ◽  
Corner Point ◽  
Confusion Matrix ◽  
Target Image ◽  
Edge Points ◽  
Ballistic Test ◽  
Image Processing Algorithms ◽  
Processing Algorithms ◽  
Facial Images ◽  
Angle Calculation

Problems in image processing to obtain the best smile are strongly influenced by the quality, background, position, and lighting, so it is very necessary to have an analysis by utilizing existing image processing algorithms to get a system that can make the best smile selection, then the Shi-Tomasi Algorithm is used. the algorithm that is commonly used to detect the corners of the smile region in facial images. The Shi-Tomasi angle calculation processes the image effectively from a target image in the edge detection ballistic test, then a corner point check is carried out on the estimation of translational parameters with a recreation test on the translational component to identify the cause of damage to the image, it is necessary to find the edge points to identify objects with remove noise in the image. The results of the test with the shi-Tomasi algorithm were used to detect a good smile from 20 samples of human facial images with each sample having 5 different smile images, with test data totaling 100 smile images, the success of the Shi-Tomasi Algorithm in detecting a good smile reached an accuracy value of 95% using the Confusion Matrix, Precision, Recall and Accuracy Methods.

Sign in / Sign up

Export Citation Format

Share Document