Quantitative petrography: approaches and applications

Quantitative petrography is a scientific and industrial direction of geology, which made huge progress due to developments and inventions in information technology and optics in the last decade. This article is introducing the modern and scientific directions of quantitative petrography and describes their current state of art as well as methodical approaches and their application. The research objects of quantitative macropetrography are hand specimens, borehole cores and polished tiles, and of micropetrography are thin and polished sections of rocks samples, splitted rock surfaces and immersion preparations. The goal of the research is to develop and present new methodological approaches of digital microscopy for the analysis of ores, rocks and minerals, as well as to investigate the morphological image analysis capabilities for the transforming from the classical description methods to quantitative petrography.

A Methodology for the Automated Delineation of Crop Tree Crowns from UAV-Based Aerial Imagery by Means of Morphological Image Analysis

The popularisation of aerial remote sensing using unmanned aerial vehicles (UAV), has boosted the capacities of agronomists and researchers to offer farmers valuable data regarding the status of their crops. This paper describes a methodology for the automated detection and individual delineation of tree crowns in aerial representations of crop fields by means of image processing and analysis techniques, providing accurate information about plant population and canopy coverage in intensive-farming orchards with a row-based plant arrangement. To that end, after pre-processing initial aerial captures by means of photogrammetry and morphological image analysis, a resulting binary representation of the land plot surveyed is treated at connected component-level in order to separate overlapping tree crown projections. Then, those components are morphologically transformed into a set of seeds with which tree crowns are finally delineated, establishing the boundaries between them when they appear overlapped. This solution was tested on images from three different orchards, achieving semantic segmentations in which more than 94% of tree canopy-belonging pixels were correctly classified, and more than 98% of trees were successfully detected when assessing the methodology capacities for estimating the overall plant population. According to these results, the methodology represents a promising tool for automating the inventorying of plants and estimating individual tree-canopy coverage in intensive tree-based orchards.

The method of increasing the information content of microfocus X-ray images

A method for processing microfocus X-ray images is described. It is based on high-frequency filtration and morphological image processing, which increases the contrast of the X-ray details. One of the most informative X-ray techniques is microfocus X-ray. In some cases, microfocus X-ray images cannot be reliably analyzed due to the peculiarities of the shooting method. So, the main disadvantages of microfocus X-ray images are most often an uneven background, distorted brightness characteristics and the presence of noise. The proposed method for enhancing the contrast of fine image details is based on the idea of combining high-frequency filtering and morphological image processing. The method consists of the following steps: noise suppression in the image, high-frequency filtering, morphological image processing, obtaining the resulting image. As a result of applying the method, the brightness of the contours in the image is enhanced. In the resulting image, all objects will have double outlines. The method was tested in the processing of 50 chest radiographs of patients with various pathologies. Radiographs were performed at the Mariinsky Hospital of St. Petersburg using digital stationary and mobile X-ray machines. In most of the radiographs, it was possible to improve the images contrast, to highlight the objects boundaries. Besides, the method was applied in microfocus X-ray tomography to improve the information content of projection data and improve the reconstruction of the 3D image of the research object. In both the first and second cases, the method showed satisfactory results. The developed method makes it possible to significantly increase the information content of microfocus X-ray images. The obtained practical results make it possible to count on broad prospects for the method application, especially in microfocus X-ray.

Contour Fitting of Fused Filaments Cross-Section Images by Lemniscates of Booth: Application to Viscous Sintering Kinetics Modeling

A method for image analysis was implemented to determine the edge pixels of two biopolymer-based thermoplastic filaments during their hot melt isothermal sintering at 120 °C. Successive inverted ellipses are adjusted to the contour of the sintered filaments and lead to the identification of the parameters of the corresponding lemniscates of Booth. The different steps of the morphological image analysis are detailed, from 8-bit coded acquired images (1 frame/s), to the final fitting of the optimized mathematical functions describing the evolution of the filaments envelope. The complete sequence is composed of an initial pure viscous sintering step during the first minute, followed by viscoelastic swelling combined with melt spreading for a longer time, and then the stabilization of the sintered filaments shape for over 2 min at high temperatures. Using a master curve obtained from Hopper’s abacus, the characteristic viscous sintering time is assessed at tvs = 78 s, confirming the one previously found based on the measurement of the bonding neck length alone. Then, the full description of the evolution of the thermoplastic filaments envelope is assessable by image analysis during sintering trials as a result of its digital modeling as successive lemniscates of Booth, reflecting geometry changes in the molten state.

Combining Morphological and Histogram based Text Line Segmentation in the OCR Context

Text line segmentation is one of the pre-stages of modern optical character recognition systems. The algorithmic approach proposed by this paper has been designed for this exact purpose. Its main characteristic is the combination of two different techniques, morphological image operations and horizontal histogram projections. The method was developed to be applied on a historic data collection that commonly features quality issues, such as degraded paper, blurred text, or presence of noise. For that reason, the segmenter in question could be of particular interest for cultural institutions, that want access to robust line bounding boxes for a given historic document. Because of the promising segmentation results that are joined by low computational cost, the algorithm was incorporated into the OCR pipeline of the National Library of Luxembourg, in the context of the initiative of reprocessing their historic newspaper collection. The general contribution of this paper is to outline the approach and to evaluate the gains in terms of accuracy and speed, comparing it to the segmentation algorithm bundled with the used open source OCR software.

Galaxy Morphological Image Classification using ResNet

Machine learning-based techniques are used widely for the classification of images into various categories. The advancement of Convolutional Neural Network (CNN) affects the field of computer vision on a large scale. It has been applied to classify and localize objects in images. Among the fields of applications of CNN, it has been applied to understand huge unstructured astronomical data being collected every second. Galaxies have diverse and complex shapes and their morphology carries fundamental information about the whole universe. Studying these galaxies has been a tremendous task for the researchers around the world. Researchers have already applied some basic CNN models to predict the morphological classes of the galaxies. In this paper, a residual network (ResNet) model is applied for this purpose. The proposed methodology classified the galaxies depending on their shape into 37 different classes. The performance of the methodology was evaluated using the data set provided by Kaggle. In this data set, 61,578 galaxy images are given, which are classified by human eye. The model achieved nearly 98% accuracy.

Analysis of Image Processing Using Morphological Erosion and Dilation

Digital image processing is important for image information extraction. One of the image processing methods is morphological image processing. This technique uses erosion and dilation operations to enhance and improve the image quality by shrinking and enlarging the image foreground. However, morphological image processing performance depends on the characteristics of structuring elements and their foreground image that need to be extracted. This paper studies how the structuring elements affect the performance of morphological erosion and dilation on binary images. The experimental result shows that choosing the right structuring element for morphological erosion and dilation can significantly influence the foreground and background structure of the output image.