Stability Analysis of Storage Caverns in Bedded Salt Rock Formation

2013 ◽  
Vol 353-356 ◽  
pp. 1345-1352
Author(s):  
Ming Zhang ◽  
Qiang Yang

Salt cavern storage is usually in bedded salt rock formation except salt dome, in particular in China. The rocks composing a bedded salt rock formation, e.g., mudstone, rock salt, interlayer, etc., often present viscoelastic-plastic behaviors, which is an important influencing factor of the long-term stability of salt caverns in it. Modelling the rheological behavior with the Druck-Prager creep model, an example of stability analysis of four salt caverns at Jintan Salt Mine of China with the finite element method is elaborated in this paper. The results show that besides the inevitable loss of effective storage room with time due to creep deformation, which decreases evidently with internal pressure but decreases slowly at a certain pressure value, the variation of operating internal pressure in each cavern can cause the change of volumes of other nearby caverns and then affect the stability of all the caverns. The internal pressure difference should be as small as possible during the operation of salt caverns.

2013 ◽  
Vol 23 (11) ◽  
pp. 2129-2154 ◽  
Author(s):  
HÉLÈNE BARUCQ ◽  
JULIEN DIAZ ◽  
VÉRONIQUE DUPRAT

This work deals with the stability analysis of a one-parameter family of Absorbing Boundary Conditions (ABC) that have been derived for the acoustic wave equation. We tackle the problem of long-term stability of the wave field both at the continuous and the numerical levels. We first define a function of energy and show that it is decreasing in time. Its discrete form is also decreasing under a Courant–Friedrichs–Lewy (CFL) condition that does not depend on the ABC. Moreover, the decay rate of the continuous energy can be determined: it is exponential if the computational domain is star-shaped and this property can be illustrated numerically.


1981 ◽  
Vol 11 ◽  
Author(s):  
W. Raab ◽  
C. Frohn ◽  
M.W. Schmidt

ABSTRACTThe geomechanical and mining-technological aspects of the construction of salt caverns as disposal chambers have been investigated during project phase 2, completed by mid 1981. With a view towards the stability analysis of such a cavern, FEM-estimates have been carried out and evaluated. From these it can be derived that- a rotational ellipsoid would be the most suitable shape- its dimensions should be 82 m (vertical axis) and 42 m (horizontal axis)- the distance (safety pillar) between the neighbouring caverns should be 170 m (vertical) and 180 m (horizontal).For practical engineering purposes the rotational ellipsoid can be modified into a cylinder with conic bottom and top. The numerical model simulated the short term as well as the long term characteristics of the surrounding salt rocks. The short term characteristics were assessed by an elastic approach, the long term characteristics by a rheological model. The input parameters have been determined by means of laboratory tests on ASSE rock salt.In a second step the characteristics of partially and completely filled caverns were simulated. It was shown clearly that deformation of the salt rock comes to a halt when counteracted by the filling.Based upon the results of the stability analysis, investigations were made to find out a suitable mining technique for the construction of the cavern. Solution mining and conventional development by means of drilling and blasting have been studied alternatively. Since both methods have their advantages and disadvantages a decision in favour of the one or the other cannot be made until the actual site has been defined.


2021 ◽  
Author(s):  
Fu Jin ◽  
Wang Xi ◽  
Ding Mingming ◽  
Yang Guobin ◽  
Zhang Shunyuan ◽  
...  

Abstract The crude oil price has been keeping at a low level in recent years, which made China's government put more efforts in the development of underground oil storages in depleted salt caverns. Under the initiative of "the Belt and Road", a more concrete concept which is "the Silk Road Economic Belt and the 21st-Century Maritime Silk Road" successfully connects Jiangsu Province in the east of China. Consisting of 20 depleted caverns, Huai'an project that is still under planning is one of the most successful examples that turn depleted salt caverns into underground crude oil storages in China. Each cavern takes up 24×104m3, while the project totally takes up 480×104m3. TDMA algorithm was adopted to solve the heat exchange model of oil, brine and surrounding rocks, revealing the relationship between temperature and cavern pressure. Salt rock safety factor, salt cavern shrinkage ratio, axial stress and ground subsidence were taken into consideration to establish a 3-dimension salt rock creep model for 19 depleted salt caverns, so that the caverns’ shapes were optimized. Hydrodynamics models were used to determine the oil's flow rate into and out of a 1000m deep cavern whose thermal field was simulated by software to reveal the temperature limit of oil and brine. Due to geothermal gradient and continuous heat transmission, the average temperature of oil and brine goes up from 35°C to 44.3°C within 7 years, while the inner pressure goes up from 12.96MPa to 21.93MPa in a depleted salt cavern. Salt creep ratio decreases as oil is stored in underground caverns for a longer period. Salt is hardly penetrated by oil, while the temperature change has a strong influence on caverns’ internal pressure. The thermal expansion factor and compressibility coefficient of crude oil and brine are both crucial to the temperature's effect on internal pressure. Caverns that have larger segments in their upper-middle or middle parts are more stable and resistant to salt creep than those that have larger segments in their lower parts. When oil is injected or pumped out, it is necessary to make the internal pressure lower than the static pressure of surrounding rocks. Hence, the most appropriate flow rate of crude oil is 4.5m/s. Crude oil that is stored in deep salt caverns may be heated up to 60°C due to the geothermal gradient, but the flammable gas in oil is rapidly gasified or even explodes when it is pumped out to the surface. To avoid accidents and air pollution, oil is cooled down before being delivered via pipelines. Oil tanks used to be applied by scale in China, however they are too obvious on the ground to comply with national strategic energy safety. Compared with oil tanks of similar volumes, the Huai'an underground oil storages may save the overall cost by 35.3%. It is the first time that the salt rock creep model is established in depleted salt caverns, while the conclusion overthrew the common preference of regular cylindrical caverns.


2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Fengrui Zhang ◽  
Annan Jiang ◽  
Xinping Guo ◽  
Xiurong Yang

Aiming at the creep problem of Banshi Tunnel in Jilin province, the creep laws of rock are analyzed by the creep test, and the Cvsic model describing the creep characteristics of the tunnel is established. To obtain the creep parameters accurately, considering the advantages of Gauss process and differential evolution algorithm, coupling the two methods, a Gauss process-differential evolution intelligent inversion method is proposed. According to on-site monitoring data, the the creep parameters of the tunnel are accurately inverted. On this basis, the stability analysis of the tunnel and the selection of a reasonable construction plan are carried out. The research results show that to ensure the stability of the tunnel, the construction scheme of initial lining + pipe shed + advanced grouting anchor rod should be adopted. The research results have guiding significance for the long-term stability evaluation of the tunnel.


1979 ◽  
Vol 42 (04) ◽  
pp. 1135-1140 ◽  
Author(s):  
G I C Ingram

SummaryThe International Reference Preparation of human brain thromboplastin coded 67/40 has been thought to show evidence of instability. The evidence is discussed and is not thought to be strong; but it is suggested that it would be wise to replace 67/40 with a new preparation of human brain, both for this reason and because 67/40 is in a form (like Thrombotest) in which few workers seem to use human brain. A �plain� preparation would be more appropriate; and a freeze-dried sample of BCT is recommended as the successor preparation. The opportunity should be taken also to replace the corresponding ox and rabbit preparations. In the collaborative study which would be required it would then be desirable to test in parallel the three old and the three new preparations. The relative sensitivities of the old preparations could be compared with those found in earlier studies to obtain further evidence on the stability of 67/40; if stability were confirmed, the new preparations should be calibrated against it, but if not, the new human material should receive a calibration constant of 1.0 and the new ox and rabbit materials calibrated against that.The types of evidence available for monitoring the long-term stability of a thromboplastin are discussed.


2021 ◽  
Vol 15 (1) ◽  
pp. 2
Author(s):  
Cristina Martín-Sabroso ◽  
Mario Alonso-González ◽  
Ana Fernández-Carballido ◽  
Juan Aparicio-Blanco ◽  
Damián Córdoba-Díaz ◽  
...  

Accumulation of cystine crystals in the cornea of patients suffering from cystinosis is considered pathognomonic and can lead to severe ocular complications. Cysteamine eye drop compounded formulations, commonly prepared by hospital pharmacy services, are meant to diminish the build-up of corneal cystine crystals. The objective of this work was to analyze whether the shelf life proposed for six formulations prepared following different protocols used in hospital pharmacies is adequate to guarantee the quality and efficacy of cysteamine eye drops. The long-term and in-use stabilities of these preparations were studied using different parameters: content of cysteamine and its main degradation product cystamine; appearance, color and odor; pH and viscosity; and microbiological analysis. The results obtained show that degradation of cysteamine was between 20% and 50% after one month of storage in the long-term stability study and between 35% and 60% in the in-use study. These data confirm that cysteamine is a very unstable molecule in aqueous solution, the presence of oxygen being the main degradation factor. Saturation with nitrogen gas of the solutions offers a means of reducing cysteamine degradation. Overall, all the formulae studied presented high instability at the end of their shelf life, suggesting that their clinical efficacy might be dramatically compromised.


2021 ◽  
Vol 1193 (1) ◽  
pp. 012077
Author(s):  
A Mínguez ◽  
J Moreno ◽  
J De Vicente

Abstract Gauge blocks are one of the most widespread measurement standards (etalons) in dimensional metrology laboratories. Among all its properties, it is worth highlighting the importance of dimensional stability. This property allows to classify these measuring instruments in quality grades. Although the gauge blocks should be dimensionally stable, it can be observed that there is a drift that can be observed when the calibration history is revised. In this document, authors present a statistical method for the estimation of the dimensional stability of gauge blocks using the calibration history of samples from the main manufacturers. In addition, all the samples have been subjected to metallographic analysis to evaluate the structure.


2021 ◽  
pp. 1-27
Author(s):  
Yichen Bao ◽  
Kai Liu ◽  
Quan Zheng ◽  
Lulu Yao ◽  
Yufu Xu

Abstract Pickering emulsion is a new type of stable emulsion made by ultra-fine solid particles instead of traditional surfactants as stabilizers, which has received widespread attention in recent years. The preparation methods of stator-rotor homogenization, high-pressure homogenization, and ultrasonic emulsification were compared with others in this work. The main factors affecting the stability of Pickering emulsion are the surface humidity of the solid particles, the polarity of the oil phase, and the oil-water ratio. These factors could affect the nature of the solid particles, the preparation process of Pickering emulsion and the external environment. Consequently, the long-term stability of Pickering emulsion is still a challenge. The tribological investigations of Pickering emulsion were summarized, and the multifunctional Pickering emulsion shows superior prospects for tribological applications. Moreover, the latest development of Pickering emulsion offers a new strategy for smart lubrication in the near future.


Sign in / Sign up

Export Citation Format

Share Document