Research of Internal Combustion Engine Piston Skirt Profile Line Effect Based on Dynamics and Tribological Coupling Model

2013 ◽  
Vol 373-375 ◽  
pp. 3-6
Author(s):  
Xiao Rong Zhou ◽  
Meng Tian Song ◽  
Gan Wei Cai
Keyword(s):  
Piston Ring ◽  
Combustion Engine ◽  
Cylinder Liner ◽  
Coupling Model ◽  
Piston Skirt ◽  
Coupling Relationship ◽  
Engine Piston ◽  
Profile Line ◽  
Lubrication Performance ◽  
Piston System

This paper mainly based on the coupling relationship between tribological and dynamic behaviors of cylinder liner-piston system to establish dynamics and tribology coupling model of cylinder linerpiston-piston ring, and to analyze the effect of piston skirt profile based on it, providing theoretical basis for determining the effect of piston skirt profiles to piston dynamics and lubrication performance.

Research of Numberical Solution on Kinetic and Tribological Coupled Model of Piston Systems

2013 ◽  
Vol 373-375 ◽  
pp. 95-98
Author(s):  
Xiao Rong Zhou ◽  
Yu Ling Zhang ◽  
Gan Wei Cai
Keyword(s):  
Piston Ring ◽  
Numerical Solutions ◽  
Dynamic Performance ◽  
Coupled Model ◽  
Cylinder Liner ◽  
Coupling Model ◽  
Ring System ◽  
Calculation Process ◽  
Piston System ◽  
The Finite Difference Method

This paper establishs a coupled model on kinetic and tribological of cylinder liner-piston-piston ring system and takes the cylinder liner-piston system as an automatic control system based on the finite difference method and overrelaxation iteration method; the numerical solutions of the model is put forward and designed the overall the calculation process of coupling model, providing theoretical basis for further analyzing the piston system dynamic performance.

Mutual influence of plateau roughness and groove texture of honed surface on frictional performance of piston ring–liner system

2016 ◽  
Vol 231 (7) ◽  
pp. 838-859 ◽  
Author(s):  
Yang Hu ◽  
Xianghui Meng ◽  
Youbai Xie ◽  
Jiazheng Fan
Keyword(s):  
Piston Ring ◽  
Cylinder Liner ◽  
Texture Features ◽  
Groove Depth ◽  
Mixed Lubrication ◽  
Operating Conditions ◽  
Friction Reduction ◽  
Lubrication Performance ◽  
Liner System ◽  
Frictional Performance

The cylinder liner surface finish, which is commonly produced using the honing technique, is an essential factor of engine performance. The characteristics of the texture features, including the cross-hatch angle, the plateau roughness and the groove depth, significantly affect the performance of the ring pack–cylinder liner system. However, due to the influence of the honed texture features, the surface roughness of the liner is not subject to Gaussian distribution. To simulate the mixed lubrication performance of the ring–liner system with non-Gaussian roughness, the combination of a two-scale homogenization technique and a deterministic asperities contact method is adopted. In this study, a one-dimensional homogenized mixed lubrication model is established to study the influence of groove parameters on the load-carrying capacity and the frictional performance of the piston ring–liner system. The ring profile, plateau roughness, and operating conditions are taken into consideration. The main findings are that for nonflat ring, shallow and wide groove textures are beneficial for friction reduction, and there exists an optimum groove density that makes the friction minimum; for flat ring, wide and sparse grooves help improving the tribological performance, and there exists an optimum groove depth that makes the friction minimum.

Influence of positive texturing on friction and wear properties of piston ring-cylinder liner tribo pair under lubricated conditions

2019 ◽  
Vol 71 (4) ◽  
pp. 515-524 ◽  
Author(s):  
Venkateswara Babu P. ◽  
Ismail Syed ◽  
Satish Ben Beera
Keyword(s):  
Wear Resistance ◽  
Internal Combustion Engine ◽  
Friction And Wear ◽  
Piston Ring ◽  
Combustion Engine ◽  
Cylinder Liner ◽  
Internal Combustion ◽  
Tribological Performance ◽  
Friction Reduction ◽  
Content Type

Purpose In an internal combustion engine, piston ring-cylinder liner tribo pair is one among the most critical rubbing pairs. Most of the energy produced by an internal combustion engine is dissipated as frictional losses of which major portion is contributed by the piston ring-cylinder liner tribo pair. Hence, proper design of tribological parameters of piston ring-cylinder liner pair is essential and can effectively reduce the friction and wear, thereby improving the tribological performance of the engine. This paper aims to use surface texturing, an effective and feasible method, to improve the tribological performance of piston ring-cylinder liner tribo pair. Design/methodology/approach In this paper, influence of positive texturing (protruding) on friction reduction and wear resistance of piston ring surfaces was studied. The square-shaped positive textures were fabricated on piston ring surface by chemical etching method, and the experiments were conducted with textured piston ring surfaces against un-textured cylinder liner surface on pin-on-disc apparatus by continuous supply of lubricant at the inlet of contact zone. The parameters varied in this study are area density and normal load at a constant sliding speed. A comparison was made between the tribological properties of textured and un-textured piston ring surfaces. Findings From the experimental results, the tribological performance of the textured piston ring-cylinder liner tribo pair was significantly improved over a un-textured tribo pair. A maximum friction reduction of 67.6 per cent and wear resistance of 81.6 per cent were observed with textured ring surfaces as compared to un-textured ring surfaces. Originality/value This experimental study is helpful for better understanding of the potency of positive texturing on friction reduction and wear resistance of piston ring-cylinder liner tribo pair under lubricated sliding conditions.

Numerical and Experimental Analysis of the Honing Texture on the Lubrication Performance of Piston Ring–Cylinder Liner Tribosystem

2019 ◽  
Vol 62 (6) ◽  
pp. 991-1006 ◽  
Author(s):  
Tongyang Li ◽  
Xiqun Lu ◽  
Xuan Ma ◽  
Hanzhang Xu ◽  
Bowen Jiao ◽  
...  
Keyword(s):  
Experimental Analysis ◽  
Piston Ring ◽  
Cylinder Liner ◽  
Lubrication Performance

Theoretical Analysis of Piston Ring Frictional Loss in an Innovative Rotating Liner Internal Combustion Engine

2005 ◽  
Author(s):  
H. Xu ◽  
M. Kim ◽  
M. D. Bryant ◽  
R. D. Matthews ◽  
T. M. Kiehne
Keyword(s):  
Piston Ring ◽  
Combustion Engine ◽  
Cylinder Liner ◽  
Rolling Friction ◽  
Friction Model ◽  
Statistical Parameters ◽  
Restoring Force ◽  
Frictional Loss ◽  
Surface Irregularities ◽  
Liner Surface

This paper presents a new lubrication model to predict piston ring friction. The average Reynolds equation is adopted to obtain the hydrodynamic component of restoring force against the cylinder liner surface. The dry or boundary lubricated component is derived from Greenwood-Tripp model. The influence of surface irregularities or roughness on the lubricant flow will be described by statistical parameters. Unlike classical piston ring mixed lubrication models, a sideslip rolling friction model is incorporated with contact simulation. Numerical results show that piston ring friction is reduced dramatically by the liner rotation.

scholarly journals The Analysis of Secondary Motion and Lubrication Performance of Piston considering the Piston Skirt Profile

2018 ◽  
Vol 2018 ◽  
pp. 1-27 ◽  
Author(s):  
Yanjun Lu ◽  
Sha Li ◽  
Peng Wang ◽  
Cheng Liu ◽  
Yongfang Zhang ◽  
...  
Keyword(s):  
Thermal Deformation ◽  
Work Performance ◽  
Cylinder Liner ◽  
Connecting Rod ◽  
Piston Skirt ◽  
Piston Cylinder ◽  
Lubrication Performance ◽  
Rod System ◽  
Liner System ◽  
Secondary Motion

The work performance of piston-cylinder liner system is affected by the lubrication condition and the secondary motion of the piston. Therefore, more and more attention has been paid to the secondary motion and lubrication of the piston. In this paper, the Jakobson-Floberg-Olsson (JFO) boundary condition is employed to describe the rupture and reformation of oil film. The average Reynolds equation of skirt lubrication is solved by the finite difference method (FDM). The secondary motion of piston-connecting rod system is modeled; the trajectory of the piston is calculated by the Runge-Kutta method. By considering the inertia of the connecting rod, the influence of the longitudinal and horizontal profiles of piston skirt, the offset of the piston pin, and the thermal deformation on the secondary motion and lubrication performance is investigated. The parabolic longitudinal profile, the smaller top radial reduction and ellipticities of the middle-convex piston, and the bigger bottom radial reduction and ellipticities can effectively reduce the secondary displacement and velocity, the skirt thrust, friction, and the friction power loss. The results show that the connecting rod inertia, piston skirt profile, and thermal deformation have important influence on secondary motion and lubrication performance of the piston.

Numerical Simulation on the Lubrication Performance of Surface Textured Piston Rings

2011 ◽  
Vol 199-200 ◽  
pp. 734-738 ◽  
Author(s):  
Qiu Ying Chang ◽  
Xian Liang Zheng ◽  
Qing Liu
Keyword(s):  
Numerical Simulation ◽  
Film Thickness ◽  
Friction Force ◽  
Friction And Wear ◽  
Piston Ring ◽  
Hydrodynamic Lubrication ◽  
Cylinder Liner ◽  
Area Density ◽  
Oil Film ◽  
Lubrication Performance

Surface texturing has been successfully employed in some tribological applications in order to diminish friction and wear. This technology may be used in a piston ring to decrease the friction and wear of the contact between a piston ring and cylinder liner. A numerical simulation of lubrication between a surface textured piston ring and cylinder liner based on the hydrodynamic lubrication theory was conducted. The influence of surface texture parameters on piston ring lubrication performance was obtained by solving the mathematical equations with a multi-grid method. The results show that under the micro-dimple area density of 5%-40% the minimum oil film thickness increases and the dimensionless friction force decreases with the increasing of it. Under the dimple area density of 40%-60%, the minimum oil film thickness and the dimensionless friction force change slightly. Under various dimple area densities the optimum dimple depth at the given working condition in this paper is about 5µm.

scholarly journals Effects of a Cylinder Liner Microstructure on Lubrication Condition of a Twin-Land Oil Control Ring and a Piston Skirt of an Internal Combustion Engine

2021 ◽  
Author(s):  
Koji Kikuhara ◽  
Philipp S Koeser ◽  
Tian Tian
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Cylinder Liner ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Friction Reduction ◽  
Surface Structures ◽  
Sliding Surface ◽  
Piston Skirt ◽  
Lubrication Condition

Abstract It is hypothesized that the sliding surface structures improve the lubrication condition by forming an oil sump on the sliding surface, redistributing the oil, and trapping wear debris. For these reasons, the sliding surface structures have been used as a friction reduction method for a long time. However, how to optimize the sliding surface structure is still controversial. In this work, effects of microstructure laid on the cylinder liner of an internal combustion engine on twin-land oil control ring (TLOCR) and piston skirt lubrication condition were investigated by comparing friction between the conventional fine-honed liner (CFL) and the microstructured liner (MSL) which was made based on the CFL. As a result of the friction measurement using a floating liner engine, it was found that the microstructure improved lubrication condition by reducing hydrodynamic friction. On the other hand, the result showed there was a possibility that the microstructure deteriorated friction depending on the engine operating conditions.

Effect of axial piston pin motion on tribo-dynamics of piston skirt-cylinder liner system

2018 ◽  
Vol 70 (1) ◽  
pp. 140-154
Author(s):  
Fanming Meng ◽  
Minggang Du ◽  
Xianfu Wang ◽  
Yuanpei Chen ◽  
Qing Zhang
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Cylinder Liner ◽  
Internal Combustion ◽  
Axial Motion ◽  
Content Type ◽  
Piston Skirt ◽  
Operation Conditions ◽  
Liner System ◽  
Axial Piston

Purpose The purpose of this study is to investigate the effects of the axial piston pin motion on the tribological performances of the piston skirt and cylinder liner vibration for an internal combustion engine (ICE) under different operation conditions. Design/methodology/approach The dynamic equation for the piston incorporating into axial piston pin motion is derived first. Then, the proposed equation and associated lubrication equations are solved using the Broyden algorithm and difference method, respectively. Moreover, the axial motion of the piston pin and its slap on the cylinder liner are studied under different operation conditions. Findings The axial piston pin motion leads to an overall increase in the friction power consumption. Increments in the ICE speed and lubricant viscosity can augment the axial pin motion and cylinder liner vibration, especially in the power stroke. The said increments cause the instability of the piston motion in the cylinder. The axial motion of piston pin can be restrained through the eccentricity of the piston pin close to the thrust side of the cylinder liner. Originality/value This study conducts detailed discussions of the effect of axial piston pin motion on tribological and dynamic performances for piston skirt-cylinder liner system of an internal combustion engine and gives a helpful reference to analyses and designs of internal combustion engines.

Sign in / Sign up

Export Citation Format

Share Document