Integration of Value Stream Mapping with RFID, WSN and ZigBee Network

2013 ◽  
Vol 465-466 ◽  
pp. 769-773
Author(s):  
Aftab Ahmed ◽  
Khalid Hasnan ◽  
Badrul Aisham ◽  
Qadir Bakhsh
Keyword(s):  
Radio Frequency Identification ◽  
Human Error ◽  
Ieee 802.15.4 ◽  
Industrial Applications ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Ieee 802.15.4 Standard ◽  
Locating System

Value stream mapping (VSM) significantly monitored by integrating radio frequency identification (RFID), wireless sensor network (WSN), ZigBee wireless technologies and Labview Graphical user interface (GUI). These technologies are used for identifying, sensing, positioning, multi-hop communication and real time locating system (RTLS). Combined effect of above technologies will optimize labor and operations cost, minimize human error; improve environmental performance and information accuracy. ZigBee protocol IEEE 802.15.4 standard has been used as wireless network in variety of commercial and industrial applications. The range of tracking of RFID reader enhanced with ZigBee coordinator through ZigBee router, which overcomes the range of radio areas that do not reach signals from the RFID reader. The proposed system provides richer information of objects location, identification and their environmental status like temperature and moisture.

scholarly journals PEMANFAATAN TEKNOLOGI RFID (RADIO FREQUENCY IDENTIFICATION) DALAM LAYANAN REGISTRASI REKAM MEDIS PASIEN

2016 ◽  
Vol 7 (1) ◽  
pp. 241
Author(s):  
Patrisius Kusi Olla
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Human Error ◽  
Rfid Tag ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Standard Card

Penelitian ini bertujuan mengembangkan sebuah aplikasi yang memanfaatkan teknologi RFID (Radio Frequency Identification) dalam layanan rumah sakit untuk pengelolaan layanan pendaftaran dan pencatatan rekam medis pasien. Berdasarkan studi pendahuluan mengenai layanan registrasi rekam medis pada rumah sakit, ditemukan permasalahan yaitu tugas staf pengelolaan unit pendaftaran lebih rumit karena pendataan pasien masih dilakukan secara manual, masih terdapat kesalahan pencatatan karena human error, penelusuran pasien membutuhkan waktu yang lama dan kurang efektif. Untuk mengurangi permasalahan tersebut, dikembangkan aplikasi RFID dalam layanan pencatatan dan registrasi rekam medis. Penelitian ini diawali dengan melakukan analisis sistem yang saat ini berjalan. Pengembangan aplikasi menggunakan perangkat RFID Read/Write yang terdiri dari RF Reader CV6600-USB SDK dengan frekuensi 13,56 MHz dan RFID Tag menggunakan MIFARE Standard Card MF1 ICS50. Sedangkan perangkat lunak aplikasi yang dikembangkan dalam penelitian ini menggunakan bahasa pemrograman visual Borland Delphi 7. Hasil penelitian menunjukkan bahwa RFID Tag jenis MIFARE standard card 1Kbyte termasuk tipe read or write mampu menyimpan informasi riwayat medis pasien. Penerapan sistem layanan rumah sakit dengan memanfaatkan teknologi identifikasi berbasis RFID memiliki indikasi perkembangan yang baik terhadap upaya peningkatan kualitas pelayanan, khususnya bagian pendaftaran dan unit pencatatan rekam medis. Kata kunci: registrasi pasien, RFID, reader, tag, rekam medis, penelusuran pasien.

scholarly journals A Novel Method for Cluster Detection of RFID-Tags using Multilinear Polarized Antenna

2021 ◽  
Vol 20 ◽  
pp. 82-100
Author(s):  
Hussain Saleem Sheikh ◽  
Fahim Gohar Awan ◽  
Asima Kiran
Keyword(s):  
Radio Frequency Identification ◽  
Human Error ◽  
Data Transfer ◽  
Daily Basis ◽  
Antenna Design ◽  
Point Of Sale ◽  
Rfid Reader ◽  
Reader Antenna ◽  
Frequency Identification ◽  
Rf Energy

Product identification using barcodes has gained good astounding, especially at the point of sale, where different products are being scanned individually before making the payment receipt. These products when at the warehouse meets issues like individual scanning demands significant time and labor to be involved in the human error. Barcodes have been in a process of replacement by Radio Frequency Identification (RFID). RFID is a technology that enables data transfer wirelessly and provides several advantages over barcodes which mandatory requires line of sight. Much of the work has been done on RFID tag antenna design, but efficient reader antenna design has been a major need of the hour for big warehouses, that came across bulk data to manage on daily basis. RFID reader antennas are unable to focus their RF energy on a desired zone. This paper proposes a novel multi-linear polarized RFID reader antenna design that utilizes the RF energy efficiently to meet the bulk reading application that will help in managing the tagged stock for industrial application.

scholarly journals ClothFace: A Batteryless RFID-Based Textile Platform for Handwriting Recognition

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4878
Author(s):  
Han He ◽  
Xiaochen Chen ◽  
Adnan Mehmood ◽  
Leevi Raivio ◽  
Heikki Huttunen ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Radio Frequency Identification ◽  
Handwriting Recognition ◽  
Cost Effective ◽  
Recognition System ◽  
Rfid Reader ◽  
Textile Antenna ◽  
Recognition Ability ◽  
Frequency Identification ◽  
Sequential Information

This paper introduces a prototype of ClothFace technology, a battery-free textile-based handwriting recognition platform that includes an e-textile antenna and a 10 × 10 array of radio frequency identification (RFID) integrated circuits (ICs), each with a unique ID. Touching the textile platform surface creates an electrical connection from specific ICs to the antenna, which enables the connected ICs to be read with an external UHF (ultra-haigh frequency) RFID reader. In this paper, the platform is demonstrated to recognize handwritten numbers 0–9. The raw data collected by the platform are a sequence of IDs from the touched ICs. The system converts the data into bitmaps and their details are increased by interpolating between neighboring samples using the sequential information of IDs. These images of digits written on the platform can be classified, with enough accuracy for practical use, by deep learning. The recognition system was trained and tested with samples from six volunteers using the platform. The real-time number recognition ability of the ClothFace technology is demonstrated to work successfully with a very low error rate. The overall recognition accuracy of the platform is 94.6% and the accuracy for each digit is between 91.1% and 98.3%. As the solution is fully passive and gets all the needed energy from the external RFID reader, it enables a maintenance-free and cost-effective user interface that can be integrated into clothing and into textiles around us.

scholarly journals Rancang Bangun Sistem Pengaman Sepeda Motor Menggunakan Radio Frequency Identification (RFID) dan Notifikasi Melalui Handphone

2019 ◽  
Vol 8 (1) ◽  
pp. 13-19
Author(s):  
Meli Mildawati ◽  
Wildian Wildian
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Reed Switch ◽  
Rfid Tag ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Arduino Uno

Sistem pengaman sepeda motor menggunakan radio frequency identification (RFID) dan notifikasi melalui handphone yang dikontrol dengan modul Arduino Uno telah dirancang bangun. RFID terdiri dari sebuah RFID tag dan RFID reader. RFID tag yang memiliki kode yang berbeda-beda, digunakan sebagai kunci untuk menghidupkan sepeda motor setelah kunci kontak digunakan. RFID reader dapat membaca tag pada jarak maksimal 1,26 cm. Sepeda motor yang dihidupkan tanpa menggunakan RFID tag atau RFID tag tidak sesuai menyebabkan aktifnya reed switch pada pelek roda depan. Ketika roda telah berputar sebanyak empat kali, maka alarm aktif dan GSM SIM 800L mengirimkan notifikasi berupa SMS sebanyak satu kali dan misscall sebanyak tiga kali ke nomor handphone pemilik sepeda motor. Waktu delay rata-rata SMS dan miscall berturut-turut adalah 5,42 s, 8,62 s, 61,14 s dan 113,16 s. Kata kunci: sistem pengaman sepeda motor, RFID, Arduino Uno , reed switch, GSM SIM 800L

scholarly journals Penggunaan Radio Frequency Identification (RFID) dan Mikrokontroler AT89S8253 untuk Pengaman Sepeda Motor

2010 ◽  
Vol 1 (1) ◽  
pp. 51-74
Author(s):  
Muhammad Kifli Hutagalung
Keyword(s):  
Radio Frequency ◽  
Smart Card ◽  
Radio Frequency Identification ◽  
Rfid Reader ◽  
Frequency Identification

Peningkatan jumlah kendaraan bermotor berbanding lurus dengan jumlah pencurian kendaraan bermotor itu sendiri. Para produsen sepeda motor hanya mengandalkan kunci kontak dan kunci stang untuk pengaman sepeda motor dari pencurian. Metode konvensional ini sangat muda untuk dijebol. Radio Frequency Identification (RFID) adalah metode pengamanan dengan menggunakan tag (transponder) sebagai penanda identitas sebuah benda atau kepemilikan sebuah benda. Berbeda dengan kartu ATM atau smart card lainnya penggunaan RFID tidak perlu kontak langsung  dengan pembaca atau readernya, sehingga faktor kerusakan tag/kartu RFID dapat dihindari. Dengan memadukan Tag, RFID Reader dan Mikrokontroler AT89SS8253, rangkaian relay dan motor servo dapat dibangun sebuah pengaman sepeda motor yang lebih handal. Pada kondisi sepeda motor mati pengaman ini akan aktif artinya semua perangkat sepeda motor tidak dapat digunakan dari rem, gas, saluran minyak dan lain- lain. Ketika seseorang mencoba untuk memutus hubungan kabel kunci kontak maka sistema alarm akan aktif dengan ditandai bunyi alarm dan klakson serta semua lampu akan hidup. Sedangkan rem, klose, gas, gigi tidak dapat digunakan. Begitu juga saluran minyak dari tangki ke mesin terputus.

scholarly journals Compact Design of Circularly Polarized Antenna with Vertical Slotted Ground for RFID Reader Application

2017 ◽  
Vol 2017 ◽  
pp. 1-5
Author(s):  
Hesheng Cheng ◽  
Jin Zhang ◽  
Hexia Cheng ◽  
Qunli Zhao
Keyword(s):  
Radio Frequency Identification ◽  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Ultrahigh Frequency ◽  
Circularly Polarized ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Compact Design ◽  
Matching Techniques

A novel compact circular polarization (CP) microstrip antenna is proposed for UHF ultrahigh frequency (UHF) radio frequency identification (RFID) reader applications. The proposed antenna is composed of a corner truncated square-ring radiating patch on a substrate and a vertical slotted ground surrounding four sides of the antenna. A new feeding scheme is designed from flexible impedance matching techniques. The impedance bandwidths for S11<-10 dB and 3 dB axial ratio (AR) bandwidth are 12.1% (794.5–896.5 MHz) and 2.5% (833.5–854.5 MHz), respectively.

scholarly journals Novel Extensions to Enhance Scalability and Reliability of the IEEE 802.15.4-DSME Protocol

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 126 ◽  
Author(s):  
Filippo Battaglia ◽  
Mario Collotta ◽  
Luca Leonardi ◽  
Lucia Lo Bello ◽  
Gaetano Patti
Keyword(s):  
Ieee 802.15.4 ◽  
Industrial Applications ◽  
Periodic Flows ◽  
Multiple Flows ◽  
Channel Diversity ◽  
Communication Reliability ◽  
Ieee 802.15.4 Standard ◽  
Performance Results

The Deterministic and Synchronous Multichannel Extension (DSME) of the IEEE 802.15.4 standard was designed to fulfill the requirements of commercial and industrial applications. DSME overcomes the IEEE 802.15.4 limitation on the maximum number of Guaranteed Time Slots (GTS) in a superframe and it also exploits channel diversity to increase the communication reliability. However, DSME suffers from scalability problems, as its multi-superframe structure does not efficiently handle GTS in networks with a high number of nodes and periodic flows. This paper proposes the enhanceD DSME (D-DSME), which consists of two extensions that improve the DSME scalability and reliability exploiting a GTS within the multi-superframe to accommodate multiple flows or multiple retransmissions of the same flow. The paper describes the proposed extensions and the performance results of both OMNeT simulations and experiments with real devices implementing the D-DSME.

scholarly journals Implementasi Rule Based Expert Systems untuk Realtime Monitoring Penyelesaian Perkara Pidana Menggunakan Teknologi Radio Frequency Identification

2017 ◽  
Vol 7 (1) ◽  
pp. 73
Author(s):  
Mar Fuah
Keyword(s):  
Expert Systems ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Criminal Case ◽  
Rule Based ◽  
Case File ◽  
Rfid Reader ◽  
Study Results ◽  
Case Files ◽  
Frequency Identification

One of the problems in the criminal case completions is that the difficulty of making decision to estimate when the settlement of the case file will be fulfilled. It is caused by the number of case files handled and detention time changing. Therefore, the fast and accurate information is needed. The research aims to develop a monitoring system tracking and tracking of scheduling rules using Rule Based Expert Systems method with 17 rules, and supported by Radio Frequency Identification technology (RFID) in the form of computer applications. Based on the output of the system, an analysis is performed in the criminal case settlement process with a set of IF-THEN rules. The RFID reader read the data of case files through radio wave signals emitted by the antenna toward active-Tag attached in the criminal case file. The system is designed to monitor the tracking and tracing of RFID-based scheduling rules in realtime way that was built in the form of computer application in accordance with the system design. This study results in no failure in reading active tags by the RFID reader to detect criminal case files that had been examined. There were many case files handled in three different location, they were the constabulary, prosecutor, and judges of district court and RFID was able to identify them simultaneously. So, RFID supports the implementation of Rule Based Expert Systems very much for realtime monitoring in criminal case accomplishment.

Sign in / Sign up

Export Citation Format

Share Document