Research on the Application of Fiber Bragg Grating Sensor in Pavement Monitoring

2014 ◽  
Vol 505-506 ◽  
pp. 192-199
Author(s):  
Ye Hu ◽  
Jian Hui Yu ◽  
Shong Zhang ◽  
Jian Guang Xie
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Fiber Bragg Grating ◽  
Temperature Stability ◽  
Asphalt Pavements ◽  
Bragg Grating ◽  
High Temperature Stability ◽  
Stability Performance ◽  
Pavement Monitoring ◽  
Sensitizing Effect

Based on the fiber Bragg grating sensing principle, and according to the characteristics of asphalt pavements, two types of FBG sensors are designed. One type is rigid sensor packaged by steel casing which labeled as R-type, and the other one is flexible sensor packaged by rubber which labeled as F-type. Through the tests of sensing performance, high-temperature stability performance and low-temperature stability performance, a comprehensive analysis of the long-term service performance is obtained. Analysis show that both rigid and flexible packaing have sensitizing effect while flexible packaging is better. Both types of sensors have good high temperature stability and low temperature stability, while R-tpe is better than F-type.

Prestressed Fiber Bragg Grating With High Temperature Stability

2011 ◽  
Vol 29 (10) ◽  
pp. 1555-1559 ◽  
Author(s):  
Yuhua Li ◽  
Minwei Yang ◽  
Changrui Liao ◽  
Dongning Wang ◽  
Jian Lu ◽  
...  
Keyword(s):  
High Temperature ◽  
Fiber Bragg Grating ◽  
Temperature Stability ◽  
Bragg Grating ◽  
High Temperature Stability

Characteristics of Different Warm Mix Asphalt Compacted at Low Temperature

2011 ◽  
Vol 255-260 ◽  
pp. 3166-3170
Author(s):  
Li Ming Wang ◽  
Yi Qiu Tan ◽  
Zhen Wu Shi
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Crack Resistance ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Obvious Effect ◽  
Water Sensitivity ◽  
Active Additive ◽  
Surface Active ◽  
Temperature Crack

Additives on low temperature compaction and performances of compacted mixtures, the author devised low temperature environment compaction test, and then, comparison tests of volume parameters, high temperature stability, low temperature crack resistance and water sensitivity were conducted. Tests results showed that the wax additives and the surface-active additive can significantly contribute to mixtures low-temperature compactibility. The wax additive helps to improve high temperature stability obviously, and has no significant contribution to low temperature crack resistance and water sensitivity. The surface-active additive directly reduces water sensitivity, the wax additive indirectly plays the role of reducing water sensitivity by increasing the density of mixture, and the foam additive has no obvious effect on the water sensitivity.

Impact of Rheological Properties of Fiber Asphalt Mortar on Mixture Road Performance

2013 ◽  
Vol 734-737 ◽  
pp. 2287-2291 ◽  
Author(s):  
De Dong Guo
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Fiber Content ◽  
High Temperature Stability ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Asphalt Mortar

Fiber asphalt concrete has been more and more widely used in highway construction. For analyzing high and low temperature performance of fiber asphalt mixture, rheological properties of fiber asphalt mortar were studied through indoor test. Impact of Rheological properties of the fiber asphalt mortar on high temperature and low temperature properties of asphalt mixture was analyzed. Results showed that the larger fiber content was, the better performance of asphalt mixture's high temperature stability, fiber asphalt mortar rut factor and rutting tests results of asphalt mixture were linear correlation, reflecting the high temperature performance of asphalt mixture; With the increase of fiber content, variation of stiffness modulus, creep rate indicators and mixture low temperature performance was consistent, and rheological properties of fiber asphalt mortar could characterize low temperature performance of asphalt mixture.

scholarly journals Study on Laboratory Experimental Pavement Performances of SEAM Modified Asphalt Mixture

2019 ◽  
Vol 136 ◽  
pp. 03010
Author(s):  
Ma Qingna ◽  
Zhao Zhiqin ◽  
Xu Qian ◽  
Sun Feng
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Water Stability ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
The Road ◽  
Road Performance ◽  
Property Index

Adding sulphur dilution asphalt modifier SEAM to asphalt mixture is not only a modifier of asphalt mixture, but also an additive of asphalt mixture. When the modifier is added into the asphalt mixture, the road performance of the asphalt mixture can be improved. This paper studies SEAM modified asphalt mixture the Marshall property index, temperature stability, Water stability and fatigue feature in the Laboratory. On the based of the result of the experiment and analysis, SEAM can improve the high temperature stability, Water stability and fatigue feature. But the low temperature stability can’t improve.

Performance Evaluation and Comparison of Spraying Modified Asphalt in Rigid-Flexible Composite Pavement Interlayer

2013 ◽  
Vol 703 ◽  
pp. 86-89
Author(s):  
Zhao Hui Liu ◽  
Jing Yi Zhang ◽  
Ting Zhou ◽  
Sheng Li
Keyword(s):  
High Temperature ◽  
Temperature Stability ◽  
Crumb Rubber ◽  
Adhesive Property ◽  
Fatigue Performance ◽  
High Temperature Stability ◽  
Medium Temperature ◽  
Modified Asphalt ◽  
Stability Performance ◽  
Rubber Composite

Focus on destruction features of the rigid-flexible composite pavement interlayer, Crumb rubber modified asphalt, SBS and crumb rubber composite modified asphalt, SBS modified asphalt were prepared. High temperature stability performance, medium-temperature fatigue performance and adhesive property of three knds of interlaminar material were evaluated and compared. Test results show that high temperature PG grade of SBS and crumb rubber composite modified asphalt is PG82, which showed better high temperature stability. Moreover, crumb rubber modified asphalt has more soft at normal temperature which benefited to medium-temperature fatigue performance. Besides, SBS and crumb rubber composite modified asphalt possesses better interlaminar adhesive property with 60°C viscosity is 2430Pas. So SBS and crumb rubber composite modified asphalt is recommend as spraying asphalt material in rigid-flexible composite pavement interlayer, the results can provide certain reference.

Effect of Anti-Rut Agents on Properties of Asphalt Mixture

2014 ◽  
Vol 599 ◽  
pp. 110-114 ◽  
Author(s):  
Yan Hua Wang ◽  
Kuang Yi Liu ◽  
Hai Xia Zhang ◽  
Shan Li
Keyword(s):  
High Temperature ◽  
Fatigue Life ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Damage Resistance ◽  
Damage Stability ◽  
Low Temperature Cracking ◽  
Water Damage

Anti-rut agent, named RPS-3000,was added into AC-25 asphalt mixture and its effects on high temperature stability, low temperature cracking resistance, water damage resistance and fatigue life were investigated in this paper. Results showed that the high temperature stability and low temperature crack resistance of the asphalt mixture improved significantly, the water damage stability increase slightly due to the introduction of anti-rut agents. Besides, the result of fatigue life test presented that excess amount of anti-rut agent may lead a deterioration of fatigue life. Keywords: Anti-rut agent; High temperature stability; Asphalt mixture

Influence of Double-Doped Admixtures on Asphalt Mixture Performance

2012 ◽  
Vol 557-559 ◽  
pp. 329-333
Author(s):  
Zhong Run Zheng ◽  
Chao Zhao ◽  
Yi Feng Zhao ◽  
Pei Song
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Rutting Resistance ◽  
Splitting Test ◽  
Improvement Effect ◽  
Low Temperature Cracking ◽  
Better Than

This paper introduces an asphalt mixture that mixed with different admixtures, rutting resistance agent and lignin fiber, at the same time. Rutting test and freeze-thaw splitting test are used to analyze rutting resistance on the high temperature and low temperature cracking of the asphalt mixture. The experiments with different mixes material composition are conducted to analysis various properties of the two admixtures on the mixture, especially the high temperature stability, low temperature crack resistance and the law of improvement effect. In addition, the experiments also determine the optimal asphalt content of different type of mixtures. The results showed that the single-doped KTL rutting resistance or lignin fibers have some improvement in water temperature performance of asphalt mixture, stability improvement of double-doped admixture asphalt mixture is better than the single-doped asphalt mixture, such as KTL rutting resistance agents and lignin fibers

The Study on High Temperature Stability Test of Ni/Cr Cold Spray Coating

2020 ◽  
Vol 901 ◽  
pp. 43-48
Author(s):  
Jirasak Tharajak ◽  
Noppakun Sanpo
Keyword(s):  
High Temperature ◽  
Cold Spray ◽  
Temperature Stability ◽  
Spray Coating ◽  
Deposition Efficiency ◽  
High Temperature Stability ◽  
Excellent Thermal Stability ◽  
Spray Coatings ◽  
Stability Performance ◽  
Cold Spray Coating

Recently cold spray coating technology was used for many applications in petrochemical business especially for high temperature required section. For this reason, the applied coating must be able to withstand at least 800 °C. The developed Ni/Cr cold spray coating was studied mainly on high temperature resistant property. Ni/Cr with the ratio of 80/20 feedstock powders revealed the highest deposition efficiency and it was selected to use as optimum feedstock powder compositions for the less of experimental study. Finally, it was found that Ni/Cr cold spray coatings reveal excellent thermal stability performance after completed both corrosion and thermal shock tests.

scholarly journals Preparation and Performance Analysis of High-Viscosity and Elastic Recovery Modified Asphalt Binder

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Liangchen Qu ◽  
Yingli Gao ◽  
Hui Yao ◽  
Dandan Cao ◽  
Ganpeng Pei ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Elastic Recovery ◽  
Asphalt Binder ◽  
Temperature Stability ◽  
Crumb Rubber ◽  
High Viscosity ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
And Performance

This study presented the preparation and performance of a kind of high viscosity and elastic recovery asphalt (HVERA) by using some modifiers. The performance of styrene-butadiene-styrene (SBS), rock asphalt (RA), crumb rubber (CR), and stabilizing agent (SA) for different modifiers was investigated by conventional binder test. Effects of modifiers on the high- and low-temperature properties of HVERA were investigated. The dynamic viscosity (DV) test, dynamic shear rheometer (DSR), and bending beam rheometer (BBR) analysis indicated that the high- and low-temperature rheological properties of asphalt were improved attribute to the addition of mixture of modifiers. Meanwhile, the short-term aging and long-term aging were simulated by rolling thin film oven (RTFO) and pressure aging vessel (PAV) tests. Furthermore, the Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) measurements were conducted for obtaining the mechanism and microstructure distribution of the modified asphalt binders. From the test results in this study, it was evident that the addition of SBS, RA, CR, and SA into a neat asphalt binder could both significantly improve the viscosity of the binder at high temperature and lower the creep stiffness at low temperature, which was beneficial to better both high-temperature stability and low-temperature cracking resistance of asphalt pavements. It was proved that the high temperature grade of HVERA could be increased by increasing of RA and a proper percentage of modifiers could be improved by the low temperature grade of HVERA.

Sign in / Sign up

Export Citation Format

Share Document