The SOCs Modular Method for Kinematic Analysis of Complicated Parallel Manipulators

2011 ◽  
Vol 52-54 ◽  
pp. 834-841
Author(s):  
Zhi Xin Shi ◽  
Mei Yan Ye ◽  
Yu Feng Luo ◽  
Ting Li Yang
Keyword(s):  
Kinematic Analysis ◽  
Parallel Manipulators ◽  
Initial Guess ◽  
Modular Approach ◽  
Compatibility Conditions ◽  
Kinematic Chains ◽  
Procedural Approach ◽  
Modular Method ◽  
Parallel Kinematic

This paper presents a simple and systematic modular approach for kinematic analysis of complicated Parallel Kinematic Manipulators (in short, PKMs) which coupled degrees are more than 2. (1) Single open chains (in short, SOCs) may be regarded as the basic modules of a PKM. Any PKM can always be decomposed automatically into a set of ordered SOCs, and these SOCs can also be used to recognize the basic kinematic chains contained in it. (2) The kinematic analysis algorithms and the compatibility conditions of the SOC modules are offered. (3) Directly applying the above SOC kinematic modules, the kinematic equations of a PKM can be automatically established. (4) In order to solve kinematic equations of complicated parallel manipulators which coupled degrees are more than 2, a new searching algorithm which requires no initial guess has been presented. The procedural approach is demonstrated in parallel manipulators.

A Modular Method for Mechanical Error Analysis of Planar Linkages Composed of Class II Assur Group Kinematic Chains

2021 ◽  
pp. 1-27
Author(s):  
Kuan-Lun Hsu ◽  
Jia-Yu Chung
Keyword(s):  
Error Analysis ◽  
Class Ii ◽  
Modular Approach ◽  
Numerical Examples ◽  
Kinematic Chains ◽  
Modular Method ◽  
Assur Group ◽  
Planar Linkages

Abstract This paper presents a modular method for the mechanical error analysis of complex planar linkages. The topology of the linkage under investigation is decomposed into several class II Assur group kinematic chains (AGKCs) combined in a given sequence. Therefore, the mechanical error of the whole linkage can be analyzed by investigating the error propagations of adopted AGKCs in successive order. Because class II AGKCs are first served as modules, the mechanical error equations of these AGKCs in terms of each error in link lengths and joint variables can be pre-formulated and embedded in form of subroutines in any programmable language. Once the AGKCs constituting the linkage topology is identified, the corresponding subroutines are introduced to compute the error propagations in the linkage. Therefore, the presented modular approach can facilitate the analysis by concentrating on the topology decomposition instead of the algebraic derivation. Numerical examples are provided to illustrate the advantage and flexibility of the modular approach.

Design and Singularity Analysis of a 3-Translational-DOF In-Parallel Manipulator*

2002 ◽  
Vol 124 (3) ◽  
pp. 419-426 ◽  
Author(s):  
L. Romdhane ◽  
Z. Affi ◽  
M. Fayet
Keyword(s):  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Orientation Error ◽  
Kinematic Chains ◽  
Prismatic Joints ◽  
Forward Kinematic ◽  
3D Solid ◽  
Novel Design

In this work, we shall present a novel design of a 3-translational-DOF in-parallel manipulator having 3 linear actuators. Three variable length legs constitute the actuators of this manipulator, whereas two other kinematic chains with passive joints are used to eliminate the three rotations of the platform with respect to the base. This design presents several advantages compared to other designs of similar 3-translational-dof parallel manipulators. First, the proposed design uses only revolute or spherical joints as passive joints and hence, it avoids problems that are inherent to the nature of prismatic joints when loaded in arbitrary way. Second, the actuators are chosen to be linear and to be located in the three legs since this design presents higher rigidity than other. In the second part of this paper, we addressed the problem of kinematic analysis of the proposed in-parallel manipulator. A mixed geometric and vector formulation is used to show that two solutions exist for the forward kinematic analysis. The problem of singularities is also investigated using the same method. In this work, we investigated the singularities of the active legs and the two types of singularity were identified: architectural singularities and configurational singularities. The singularity of the passive chains, used to restrict the motion of the platform to only three translations, is also investigated. In the last part of this paper, we built a 3D solid model of the platform and the amplitude of rotation due to the deformation of the different links under some realistic load was determined. This allowed us to estimate the “orientation error” of the platform due to external moments. Moreover, this analysis allowed us to compare the proposed design (over constrained) with a modified one (not over constrained). This comparison confirmed the conclusion that the over constraint design has a better rigidity.

Kinematic analysis of limited-dof parallel manipulators based on translational/rotational Jacobian and Hessian matrices

Robotica ◽  
2009 ◽  
Vol 27 (7) ◽  
pp. 971-980 ◽  
Author(s):  
Yi Lu ◽  
Yan Shi ◽  
Jianping Yu
Keyword(s):  
Kinematic Analysis ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Parallel Kinematic Machines ◽  
Parallel Kinematic

SUMMARYThis paper proposes an approach for solving the velocity and acceleration of the limited-dof (dof n < 6) parallel kinematic machines with linear active legs by means of translational/rotational Jacobian and Hessian matrices. First, based on the established or derived constraint and displacement equations, the translational/rotational Jacobian and Hessian matrices are derived. Second, the formulae for solving inverse/forward velocities and accelerations are derived from translational and rotational Jacobian/Hessian matrices. Third, a 2SPR + UPU PKM and a 2SPS + RPRR PKM are illustrated for explaining how to use this method. This approach is simple because it needs neither to eliminate 6-n rows of an n × 6 Jacobian matrix nor to determine the screw or pose of the constrained wrench.

Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms

2004 ◽  
Vol 126 (1) ◽  
pp. 109-118 ◽  
Author(s):  
Jing Wang ◽  
Cle´ment M. Gosselin
Keyword(s):  
Kinematic Analysis ◽  
Main Idea ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Degree Of Freedom ◽  
Redundant Manipulators ◽  
Parallel Mechanisms ◽  
Jacobian Matrices ◽  
Kinematic Chains ◽  
Analysis And Design

This paper addresses the singularity analysis and the design of three new types of kinematically redundant parallel mechanisms, i.e., the four-degree-of-freedom planar and spherical parallel mechanisms and the seven-degree-of-freedom spatial Stewart platform. The main idea in the design of these parallel manipulators is the addition of one redundant degree of freedom in one of the kinematic chains of the nonredundant manipulator. Such manipulators can be used to avoid the singularities inside the workspace of nonredundant manipulators. After describing the geometry of the manipulators, the velocity equations are derived and the expressions for the Jacobian matrices are obtained. Then, the singularity conditions are discussed. Finally, the expressions of the singularity loci of the kinematically redundant mechanisms are obtained and the singularity loci of the nonredundant and redundant manipulators are compared. It is shown here that the conditions for the singularity of the redundant manipulators are reduced drastically relative to the nonredundant ones. As a result, the proposed kinematically redundant parallel manipulators may be of great interest in several applications.

Synthesis of Two-Degree-of-Freedom Rotational Decoupled Manipulators of a 2R-Type Branch

2013 ◽  
Vol 284-287 ◽  
pp. 1929-1935
Author(s):  
Da Xing Zeng ◽  
Wen Juan Lu ◽  
Li Jie Zhang ◽  
Yi Tong Zhang
Keyword(s):  
Trajectory Planning ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Precision Control ◽  
Kinematic Chains ◽  
Parallel Kinematic ◽  
Branch Type ◽  
Two Degree Of Freedom

Strong coupling is one of the prominent features of the general parallel mechanisms(Par. Mec.), which has led to difficulty in the trajectory planning and precision control. To solve this problem, the designing of motion decoupled parallel mechanisms(Dec. Par. Mec.) has become a hot topic. This paper, based on the work achieved in our pre-papers, is to make an improvement on the criterion for a branch type synthesis of the rotational decoupled parallel mechanisms(Rot. Dec. Par. Mec.), which ensures the decoupling of the rotations in each limb. This paper focuses on a type synthesis of the decoupled parallel mechanisms with two degree of freedoms (DOFs). Decoupled parallel manipulators with two parallel kinematic chains, one of which is of type 2R(R represents rotation), are taken into consideration in this paper. A large number of novel decoupled architectures are already obtained, some of which have got an application for a China Patent. What has been done in this paper is carried out by means of the screw theory, which has effectively avoided complex equations by synthesis.

Symmetry and invariants of kinematic chains and parallel manipulators

Robotica ◽  
2012 ◽  
Vol 31 (1) ◽  
pp. 61-70 ◽  
Author(s):  
Roberto Simoni ◽  
Celso Melchiades Doria ◽  
Daniel Martins
Keyword(s):  
Group Theory ◽  
Automorphism Group ◽  
Kinematic Analysis ◽  
Group Structure ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Formal Definition ◽  
Kinematic Chains ◽  
Number Synthesis ◽  
Definition Of

SUMMARYThis paper presents applications of group theory tools to simplify the analysis of kinematic chains associated with mechanisms and parallel manipulators. For the purpose of this analysis, a kinematic chain is described by its properties, i.e. degrees-of-control, connectivity and redundancy matrices. In number synthesis, kinematic chains are represented by graphs, and thus the symmetry of a kinematic chain is the same as the symmetry of its graph. We present a formal definition of symmetry in kinematic chains based on the automorphism group of its associated graph. The symmetry group of the graph is associated with the graph symmetry. By using the group structure induced by the symmetry of the kinematic chain, we prove that degrees-of-control, connectivity and redundancy are invariants by the action of the automorphism group of the graph. Consequently, it is shown that it is possible to reduce the size of these matrices and thus reduce the complexity of the kinematic analysis of mechanisms and parallel manipulators in early stages of mechanisms design.

Type Synthesis of 3-DOF PPR-Equivalent Parallel Manipulators Based on Screw Theory and the Concept of Virtual Chain

2005 ◽  
Vol 127 (6) ◽  
pp. 1113-1121 ◽  
Author(s):  
Xianwen Kong ◽  
Clément M. Gosselin
Keyword(s):  
Screw Theory ◽  
Parallel Manipulators ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Kinematic Chains ◽  
Serial Robots ◽  
Application Potential ◽  
Parallel Kinematic ◽  
Moving Platform ◽  
Identical Type

PPR-equivalent parallel manipulators (PMs) are a class of 3-DOF PMs with great application potential. They are indeed the parallel counterparts of the 3-DOF PPR serial robots, in which the moving platform can rotate arbitrarily about an axis undergoing a planar translation. This paper deals with the type synthesis of 3-DOF PPR-equivalent PMs. At first, virtual chains are introduced to represent the motion patterns of 3-DOF motions and relevant results from screw theory are recalled. A method is then proposed for the type synthesis of 3-DOF PPR-equivalent PMs. Using the proposed approach, the type synthesis of 3-DOF PPR-equivalent PMs is performed in three steps. In addition to all the 3-DOF PPR-equivalent parallel kinematic chains and 3-DOF PPR-equivalent PMs proposed in the literature, a number of new 3-DOF PPR-equivalent parallel kinematic chains and 3-DOF PPR-equivalent PMs are identified. It is also found that there are no PPR-equivalent PMs with identical type of legs. The type synthesis of PPR-equivalent PMs is well solved using the proposed approach. The characteristic of the proposed approach is that the type synthesis of PPR-equivalent parallel kinematic chains is reduced to the type synthesis of 3-DOF single-loop kinematic chains and thus easy to perform.

Modular Method for Kinematic Analysis of Parallel Manipulators Based on Ordered SOCs

2006 ◽  
Author(s):  
Zhi Xin Shi ◽  
Yu Feng Luo ◽  
Ting Li Yang
Keyword(s):  
Kinematic Analysis ◽  
Continuation Method ◽  
Algebraic Method ◽  
Parallel Manipulators ◽  
New Method ◽  
Homotopy Continuation ◽  
Parallel Mechanisms ◽  
Unknown Variable ◽  
Homotopy Continuation Method ◽  
Modular Method

Based on the new viewpoint of structural decomposion that any multi-loop mechanism are made up of by a series of ordered single opened chains(SOCs), a new method for kinematic analysis of parallel manipulators, i.e, the SOCs modular method has been presented in the paper. The new method has the following features: (1) The dimensions of sets of the nonlinear kinematic analysis equations are reduced to the minimum, and the kinematic analysis equation often contains only one unknown variable for most parallel manipulators generally applied now. Accordingly, all the real solutions to forward kinematics problem of parallel mechanisms can be easily obtained by using one-dimension searching algorithm; (2) Compared with algebraic method, it has evidently reduced the difficulty of deducing formulas; (3) Compared with homotopy continuation method, it has higher computing efficiency.

Type Synthesis of 3-DOF PPR Parallel Manipulators Based on Screw Theory and the Concept of Virtual Chain

2004 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Screw Theory ◽  
Parallel Manipulators ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Kinematic Chains ◽  
Serial Robots ◽  
Prismatic Joints ◽  
Parallel Kinematic ◽  
Actuated Joints ◽  
Selection Of

PPR-PMs (parallel manipulators) are the parallel counterparts of the 3-DOF PPR serial robots, which are composed of two P (prismatic) joints and one R (revolute) joint. For a PPR-PM, the moving platform can rotate arbitrarily about an axis undergoing a planar translation. This paper deals with the type synthesis of 3-DOF PPR-PMs. At first, virtual chains are introduced to represent the motion patterns of 3-DOF motions and relevant results from screw theory are recalled. A method is then proposed for the type synthesis of 3-DOF PPR-PMs. Using the proposed approach, the type synthesis of 3-DOF PPR-PMs is performed in three steps, namely, the type synthesis of legs for PPR-PKCs (parallel kinematic chains), the type synthesis of PPR-PKCs, and the selection of actuated joints of PPR-PMs. The three steps are dealt with in detail consequently. The characteristics of the proposed approach is that the type synthesis of legs for PPR-PKCs is reduced to the type synthesis of 3-DOF overconstrained single-loop kinematic chains and thus easy to perform. In addition to all the 3-DOF PPR-PKCs and 3-DOF PPR-PMs proposed in the literature, a number of new 3-DOF PPR-PKCs and 3-DOF PPR-PMs are identified. It is also found that there are no PPR-PMs with identical types of legs.

Kinematic Analysis of a Novel 3-DOF Parallel Mechanism with Actuation Redundancy

2013 ◽  
Vol 816-817 ◽  
pp. 821-824
Author(s):  
Xue Mei Niu ◽  
Guo Qin Gao ◽  
Zhi Da Bao
Keyword(s):  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Rbf Neural Network ◽  
Analysis Method ◽  
Parallel Kinematic Mechanism ◽  
Redundantly Actuated ◽  
Parallel Kinematic ◽  
Forward Kinematic ◽  
Kinematic Mechanism ◽  
Kinematic Solution

Kinematic analysis plays an important role in the research of parallel kinematic mechanism. This paper addresses a novel forward kinematic solution based on RBF neural network for a novel 2PRRR-PPRR redundantly actuated parallel mechanism. Simulation results illustrate the validity and feasibility of the kinematic analysis method.

Sign in / Sign up

Export Citation Format

Share Document