Numerical Simulation of Vertical Axis Wind Turbine Blade Airfoil Performance

2014 ◽  
Vol 529 ◽  
pp. 173-177
Author(s):  
Li Hua Zhao ◽  
Ming Liu ◽  
Tie Lv ◽  
Xiao Qun Mei
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Simulation Software ◽  
Vertical Axis Wind Turbine ◽  
Variation Of Parameters ◽  
Wind Turbine Airfoil ◽  
And Performance

Research of blade airfoil aerodynamic characteristics is an important foundation for the vertical axis wind turbine aerodynamic design and performance analysis. CFD simulation software has been applied in this paper. Representative lift-type vertical axis wind turbine airfoil NACA0014, NACA2414, NACA4414, NACA6414, NACA8414 's aerodynamic simulation have been studied. Camber airfoil relative with the change in to the flow velocity is analyzed. At different angles of attack effect on the aerodynamic performance of wind turbines, variation of parameters for airfoil aerodynamic had been analyzed. It will help the optimal design of airfoils for vertical axis wind turbines.

scholarly journals MODELING AND SIMULATION OF THE VERTICAL AXIS WIND TURBINE BY QBLADE SOFTWARE

2020 ◽  
Vol 2 (02) ◽  
pp. 181-188
Author(s):  
MERAD ◽  
Asmae BOUANANI ◽  
Mama BOUCHAOUR
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Clean Energy ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Simulation Software ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine

The use of wind energy has no harmful effects on the environment. This makes it a clean energy that is a real alternative to the problem of nuclear waste management and greenhouse gas emissions. Vertical axis wind turbines have prospective advantages in the field of domestic applications, because they have proven effectual in urban areas where wind flow conditions are intermittent, omnidirectional, unsteady and turbulent. The wind cannot ensure a regular energy supply without optimising the aerodynamics of the blades. This article presents a reminder about wind energy and wind turbines, especially the VAWT type wind turbines and also gives a presentation on the aerodynamic side of VAWT by studying the geometry and aerodynamic characteristics of the blade profiles with the acting forces and also the explanation of the DMS multiple flow tube model. This work also gives the different simulation methods to optimize the behaviour of the blades from the selected NACA profiles; the analysis first goes through the design of the blades by the design and simulation software Qblade which is used to calculate also the forces on the blade and the coefficients of lift, drag and fineness. At the end of this article we have the DMS simulation of the VAWT turbines, by determining the power coefficient and the power collected by the turbine to select the wind turbine adapted to a well characterized site.

Investigation of vertical axis wind turbine airfoil performance in rain

2017 ◽  
Vol 232 (2) ◽  
pp. 181-194 ◽  
Author(s):  
Zhenlong Wu ◽  
Yihua Cao
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Meteorological Condition ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Turbine Performance ◽  
Practical Design ◽  
Wind Turbine Airfoil ◽  
Naca 0015

Rainfall is a common meteorological condition that wind turbines may encounter and by which their performance may be affected. This paper comprehensively investigates the effects of rainfall on a NACA 0015 airfoil which is commonly used in vertical axis wind turbines. A CFD-based Eulerian–Lagrangian multiphase approach is proposed to study the static, rotating, and oscillating performances of the NACA 0015 airfoil in rainy conditions. It is found that for the different airfoil movements, the airfoil performance can seriously be deteriorated in the rain condition. Rain also causes premature boundary layer separations and more severe flow recirculations than in the dry condition. These findings seem to be the first open reports on rain effects on wind turbine performance and should be of some significance to practical design.

scholarly journals Comparison of horizontal axis wind turbine (HAWT) and vertical axis wind turbine (VAWT)

2018 ◽  
Vol 7 (4.13) ◽  
pp. 74 ◽  
Author(s):  
Muhd Khudri Johari ◽  
Muhammad Azim A Jalil ◽  
Mohammad Faizal Mohd Shariff
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Green Technology ◽  
Horizontal Axis ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Current Output ◽  
Voltage Output ◽  
And Performance

As the demand for green technology is rising rapidly worldwide, it is important that Malaysian researchers take advantage of Malaysia’s windy climates and areas to initiate more power generation projects using wind. The main objectives of this study are to build a functional wind turbine and to compare the performance of two types of design for wind turbine under different speeds and behaviours of the wind. A three-blade horizontal axis wind turbine (HAWT) and a Darrieus-type vertical axis wind turbine (VAWT) have been designed with CATIA software and constructed using a 3D-printing method. Both wind turbines have undergone series of tests before the voltage and current output from the wind turbines are collected. The result of the test is used to compare the performance of both wind turbines that will imply which design has the best efficiency and performance for Malaysia’s tropical climate. While HAWT can generate higher voltage (up to 8.99 V at one point), it decreases back to 0 V when the wind angle changes. VAWT, however, can generate lower voltage (1.4 V) but changes in the wind angle does not affect its voltage output at all. The analysis has proven that VAWT is significantly more efficient to be built and utilized for Malaysia’s tropical and windy climates. This is also an initiative project to gauge the possibility of building wind turbines, which could be built on the extensive and windy areas surrounding Malaysian airports.  

scholarly journals Improvement of Self-Starting Capabilities of Vertical Axis Wind Turbines with New Design of Turbine Blades

2021 ◽  
Vol 13 (7) ◽  
pp. 3854
Author(s):  
Samuel Mitchell ◽  
Iheanyichukwu Ogbonna ◽  
Konstantin Volkov
Keyword(s):  
Wind Turbine ◽  
Cfd Simulation ◽  
Tangential Force ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Coefficient Of Performance ◽  
Small Range ◽  
Vertical Axis Wind Turbine ◽  
A Minor

A lift-driven vertical axis wind turbine (VAWT) generates peak power when it is rotating at high tip-speed ratios (TSR), at which time the blades encounter angles of attack (AOA) over a small range from zero to 30 degrees. However, its ability to self-start is dependent upon its performance at low TSRs, at which time the blades encounter a range of AOAs from zero to 180 degrees. A novel vented aerofoil is presented with the intention of improving the performance of a lift-driven VAWT at low TSRs without hampering the performance of the wind turbine at high TSRs. Computational fluid dynamics (CFD) simulation is used to predict the aerodynamic characteristics of a new vented aerofoil based on the well documented NACA0012 profile. Simulations are performed using the SST turbulence model. The results obtained show a reduction in the coefficient of tangential force (the force that generates torque on the wind turbine) at low AOAs (less than 90 degrees) of no more than 30%, while at high AOAs (more than 90 degrees) an improvement in the tangential force of over 100% is observed. Using a simple momentum based performance prediction model, these results suggest that this would lead to an increase in torque generation by a theoretical three-bladed VAWT of up to 20% at low TSRs and a minor reduction in coefficient of performance of up to 9% at TSR of 2 and closer to 1% at higher TSRs.

scholarly journals Fabrication and Performance Evaluation of Savonious Vertical Axis Wind Turbine for Uncertain Speed Regions

2017 ◽  
Vol 13 (2) ◽  
Keyword(s):  
Performance Evaluation ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Vertical Axis ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
And Performance

The consumption of electricity in urban as well as rural is increasing every day and became an essential commodity for household and industrial purposes. Unfortunately the availability of electrical energy in India is not sufficient to the required demand and it is essential to discover and generate energy from non-conventional sources with cheap cost. On the same time it is necessary to reduce the consumption of conventional sources and to save fuel. Among all the renewable resources, wind is one of the best resources available all the time at free of cost. Especially vertical axis wind turbines (VAWT) are self-starting, omni directional. They require no yaw mechanism to continuously orient towards the wind direction and provide a more reliable energy conversion technology, as compared to horizontal axis wind turbine. Particularly savonius vertical axis wind turbines (SVAWT) are suitable and practically possible at low or uncertain wind speed regimes. They can be fitted on rooftops and also suitable for the urban areas where electricity is not available properly. This project deals with the fabrication and performance evaluation of savonius vertical axis wind turbine using two blade rotor. The amount of power developed by the wind turbine is calculated under theoretical and practical conditions and aerodynamics coefficients are also estimated. And various design parameters of savonious rotor are identified and determined.

Design and performance analysis of savonius type vertical axis wind turbine with CFD simulation

2020 ◽  
Author(s):  
V. Praveen Kumar ◽  
Venkatesan Sorakka Ponnappan ◽  
M. Sunil Kumar ◽  
R. Rajasekar ◽  
Kanimozhi Balakrishnan ◽  
...  
Keyword(s):  
Performance Analysis ◽  
Wind Turbine ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
And Performance

Effect of Solidity on Performance of Vertical Axis Wind Turbine Using Constant Chord Reynolds Number

2021 ◽  
Author(s):  
Anirudh P ◽  
Ratna Kishore Velamati ◽  
Srinath K S ◽  
Unnikrishnan D
Keyword(s):  
Reynolds Number ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
Coefficient Of Performance ◽  
Vertical Axis Wind Turbine ◽  
Number Range ◽  
Turbine Performance ◽  
The Impact

Abstract The demand for wind turbines has increased ever since fossil fuels showed signs of quick depletion. Among wind turbines, Vertical Axis Wind Turbine (VAWT) is compact, produces less noise, is omnidirectional, resilient to turbulent flow, and is easy to maintain. The power generated by a VAWT is a function of a non-dimensional geometric parameter known as solidity (s), which is a function of turbine diameter (D), blade chord (c) and the number of blades (n). The present work analyses the impact of solidity (0.12 and 0.18) as a complete non-dimensional parameter on wind turbine performance. Each parameter of solidity is varied, keeping any one of the parameters constant and numerically studied for its performance across a range of tip speed ratios (TSR). For each solidity, six different combinations of VAWT geometric parameters were analyzed. In all the cases, the chord Reynolds number is kept constant. CFD simulation was performed on the Darrieus H-type (NACA0018 airfoil) VAWT. Two dimensional (2D) computational domains are used to study the effect on the turbine’s performance as the solidity studied is less than 0.4. Unsteady Reynolds-Averaged Navier-strokes (URANS) equation is used to solve the CFD model using ANSYS Fluent 19.1 with 4-equation transition SST k-ω for turbulence modelling. The comprehensive study of the turbine performance keeping the turbine operation within a constant Re number range shows the Coefficient of Performance (Cp) overlaps for a given solidity.

Aerodynamic and aeroacoustic performance investigations on modified H-rotor Darrieus wind turbine

2021 ◽  
pp. 0309524X2110039
Author(s):  
Amgad Dessoky ◽  
Thorsten Lutz ◽  
Ewald Krämer
Keyword(s):  
Wind Turbine ◽  
High Speed ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
3D Models ◽  
Power Coefficient ◽  
Design Parameters ◽  
Second Phase ◽  
Vertical Axis Wind Turbine ◽  
Guide Vanes

The present paper investigates the aerodynamic and aeroacoustic characteristics of the H-rotor Darrieus vertical axis wind turbine (VAWT) combined with very promising energy conversion and steering technology; a fixed guide-vanes. The main scope of the current work is to enhance the aerodynamic performance and assess the noise production accomplished with such enhancement. The studies are carried out in two phases; the first phase is a parametric 2D CFD simulation employing the unsteady Reynolds-averaged Navier-Stokes (URANS) approach to optimize the design parameters of the guide-vanes. The second phase is a 3D CFD simulation of the full turbine using a higher-order numerical scheme and a hybrid RANS/LES (DDES) method. The guide-vanes show a superior power augmentation, about 42% increase in the power coefficient at λ = 2.75, with a slightly noisy operation and completely change the signal directivity. A remarkable difference in power coefficient is observed between 2D and 3D models at the high-speed ratios stems from the 3D effect. As a result, a 3D simulation of the capped Darrieus turbine is carried out, and then a noise assessment of such configuration is assessed. The results show a 20% increase in power coefficient by using the cap, without significant change in the noise signal.

Effect of trailing edge dual synthesis jets actuator on aerodynamic characteristics of a straight-bladed vertical axis wind turbine

Energy ◽  
2022 ◽  
Vol 238 ◽  
pp. 121792
Author(s):  
Peilin Wang ◽  
Qingsong Liu ◽  
Chun Li ◽  
Weipao Miao ◽  
Shuai Luo ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Vertical Axis Wind Turbine ◽  
Trailing Edge

Vertical axis wind turbine operation in icing conditions: A review study

2021 ◽  
pp. 0309524X2110618
Author(s):  
Syed Abdur Rahman Tahir ◽  
Muhammad Shakeel Virk
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Electricity Production ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Horizontal Axis Wind Turbines ◽  
Promising Solution ◽  
Review Study ◽  
Accretion Physics

Vertical Axis Wind Turbine (VAWT) can be a promising solution for electricity production in remote ice prone territories of high north, where good wind resources are available, but icing is a challenge that can affect its optimum operation. A lot of research has been made to study the icing effects on the conventional horizontal axis wind turbines, but the literature about vertical axis wind turbines operating in icing conditions is still scarce, despite the importance of this topic. This paper presents a review study about existing knowledge of VAWT operation in icing condition. Focus has been made in better understanding of ice accretion physics along VAWT blades and methods to detect and mitigate icing effects.

Sign in / Sign up

Export Citation Format

Share Document