Research on Appraising of Tactical Internet Simulative Training

2014 ◽  
Vol 635-637 ◽  
pp. 1590-1593
Author(s):  
Jian Jun Shen ◽  
Yu Qing Xu
Keyword(s):  
Petri Net ◽  
Bp Neural Network ◽  
Training Needs ◽  
Training Level ◽  
Important Work ◽  
Network Method ◽  
Net Method ◽  
New Type ◽  
Set Up ◽  
Tactical Internet

Appraising is an important work of Tactical Internet (TI) simulative training. As a new type of network, the appraising of TI training needs to be solved by new method. Therefore, the paper set up a new index system firstly, laid the foundation for the appraising of Tactical Internet simulative training. Secondly, the paper used a Petri net method, which solved the acquisition problem for those indexes that are dynamic changed and not easy to be directly calculated. Thirdly, the paper used a BP neural network method, which solved the calculation of index weights. Finally, based on the method of satisfaction degree, the paper set up an appraising model which realized the appraising of trainees’ training level。The paper’s work has been applied in practice and achieved good results.

Evaluation of a personal professional mentor scheme for newly qualified nurses

2021 ◽  
Vol 30 (11) ◽  
pp. 672-676
Author(s):  
Charlotte Austin ◽  
Yvonne Halpin
Keyword(s):  
Thematic Analysis ◽  
Structured Interview ◽  
Potential Outcomes ◽  
Experienced Nurses ◽  
Support Strategies ◽  
Supportive Role ◽  
New Type ◽  
Experienced Nurse ◽  
Set Up ◽  
Pastoral Support

Background: Newly qualified nurses are known to experience a range of feelings and fears in the first transitional 12 months post-qualifying, with absence and turnover among potential outcomes. Aim: To evaluate the personal professional mentor role and scheme, a new pastoral support initiative, from the perspective of participating newly qualified nurses. Methods: Newly qualified paediatric nurses (n=10), who had been assigned a personal professional mentor (an experienced nurse who worked elsewhere in their employing NHS Trust), completed a semi-structured interview. The data were analysed using thematic analysis. Findings: The personal professional mentor counteracted some aspects of transition isolation for the newly qualified nurses. They were an independent, accessible, experienced confidant and a welcome new supportive role. Conclusion: Pairing experienced nurses with newly qualified nurses provided a new type of workplace support during transition. Inexpensive to set up and run, it is an easy addition to any portfolio of support strategies.

Study on the working state of the five hundred-meter aperture spherical telescope using step-wise assignment method

2014 ◽  
Vol 229 (2) ◽  
pp. 316-324 ◽  
Author(s):  
Yu Liu ◽  
Feng Gao
Keyword(s):  
Nonlinear Equations ◽  
Analytical Solutions ◽  
Driving Mechanism ◽  
Initial Value ◽  
Unknown Parameters ◽  
Support Structure ◽  
Assignment Method ◽  
New Type ◽  
Set Up ◽  
The Mathematical Model

The working state of the five hundred-meter aperture spherical telescope (FAST) is solved using the step-wise assignment method. In this paper, the mathematical model of the cable-net support structure of the FAST is set up by the catenary equation. There are a large number of nonlinear equations and unknown parameters of the model. The nonlinear equations are solved by using the step-wise assignment method. The method is using the analytical solutions of the cable-net equations of one working state as the initial value for the next working state, from which the analytical solutions of the nonlinear equations of the cable-net for each working state of the FAST and the tension and length of each driving cable can be obtained. The suggested algorithm is quite practically well suited to study the working state of the cable-net structures of the FAST. Also, the working state analysis result of the cable-net support structure of a reduced model of the cable-net structure reflector for the FAST is given to verify the reliability of the method. In order to show the validity of the method, comparisons with another algorithm to set the initial value are presented. This method has an important guiding significance to the further study on the control of the new type of flexible cable driving mechanism, especially the FAST.

Annihilation Lifetime Spectroscopy Using Positrons from Bremsstrahlung Production

2012 ◽  
Vol 331 ◽  
pp. 41-52 ◽  
Author(s):  
Andreas Wagner ◽  
Wolfgang Anwand ◽  
Maik Butterling ◽  
Thomas E. Cowan ◽  
Fine Fiedler ◽  
...  
Keyword(s):  
Positron Annihilation ◽  
Linear Accelerator ◽  
Electron Accelerator ◽  
Positron Annihilation Spectroscopy ◽  
Doppler Broadening ◽  
Electron Linear Accelerator ◽  
Positron Annihilation Lifetime ◽  
Electron Bremsstrahlung ◽  
New Type ◽  
Set Up

A new type of a positron annihilation lifetime spectroscopy (PALS) system has been set up at the superconducting electron accelerator ELBE [ at Helmholtz-Zentrum Dresden-Rossendorf. In contrast to existing source-based PALS systems, the approach described here makes use of an intense photon beam from electron bremsstrahlung which converts through pair production into positrons inside the sample under study. The article focusses on the production of intense bremsstrahlung using a superconducting electron linear accelerator, the production of positrons inside the sample under study, the efficient detector setup which allows for annihilation lifetime and Doppler-broadening spectroscopy simultaneously. Selected examples of positron annihilation spectroscopy are presented.

The Creation of a Multi-Link Load Balancing Mechanism for Planetary Gearing: Part 2 — Optimum Mechanism Selection and Dimension Determination

1992 ◽  
Author(s):  
Zhang Hong ◽  
Wei-qing Cao ◽  
Ting Li Yang ◽  
Jin Kui Chu
Keyword(s):  
Load Balancing ◽  
Arbitrary Number ◽  
Uniform Load ◽  
Topological Structures ◽  
Optimum Load ◽  
New Type ◽  
The Common ◽  
The Creation ◽  
Set Up

Abstract This paper is the second of a series of two papers which designed a new type of load balancing mechanisms for planetary gearings with arbitrary number of planets. In this paper the common expression of the non-uniform load share factor was deduced, and a function parameter:force-arm factor and their solution was given. That makes it possible that the dimensions and the ability of load equilibrium of Multi-Link Load Balancing Mechanisms can be determined. The criteria of optimum load balancing Mechanisms selection were set up with consider of the effects of turning pair clearances, and optimum mechanisms were selected among the 15 candidates obtained in Part 1. Finally, it was demonstrated that the optimum multi-link load balancing mechanisms for arbitrary number of planets had the similar topological structures and same function and performence of load equilibrium.

The CURSOR Radio Navigation and Tracking System

1992 ◽  
Vol 45 (2) ◽  
pp. 157-165 ◽  
Author(s):  
Peter J. Duffett-Smith ◽  
Graham Woan
Keyword(s):  
Motor Vehicle ◽  
Tracking System ◽  
Temporal Coherence ◽  
Radio Navigation ◽  
Radio Transmitters ◽  
Local Medium ◽  
New Type ◽  
Set Up ◽  
Conventional Systems ◽  
New System

We describe a new type of radio navigation and tracking system which, unlike conventional systems, does not depend on a costly infrastructure of coherent radio transmitters. This new system measures positions using spatial, rather than temporal, coherence and can therefore use any existing radio transmitters set up for any purpose. We describe the principles of operation, applications and present results obtained with a demonstration unit (in Cambridge) which can measure the position of a motor vehicle to a precision of about 5 m using local medium-wave public broadcast transmitters.

Geological Adaptive Cutterhead Selection for EPB Shield Based on BP Neural Network

2014 ◽  
Vol 607 ◽  
pp. 118-123
Author(s):  
Lai Kuang Lin ◽  
Yi Min Xia ◽  
Fei He ◽  
Qing Song Mao ◽  
Kui Zhang
Keyword(s):  
Neural Network ◽  
Bp Neural Network ◽  
Earth Pressure ◽  
Training Model ◽  
Structure Design ◽  
Pressure Balance ◽  
Selection For ◽  
Earth Pressure Balance ◽  
Set Up ◽  
Epb Shield

In view of complex and fuzziness of geological adaptive cutterhead selection for earth pressure balance (EPB) shield, a cutterhead selection method based on BP neural network is put forward. Considering the structure characteristics of EPB shield cutterhead, typical cutterhead types are classified and summarized based on cutterhead topology structure and number of spokes. After analyzing the determinants of cutterhead selection, one-to-many mapping relation between cutterhead type and geological parameters is put forward, and then core geologic parameters related to cutterhead selection are concluded. The feasibility of using neural network method to choose the cutterhead type is analyzed, and a BP neural network training model for cutterhead selection is set up and tested in testing sample data. The result shows that the selected cutterhead and the construction cutterhead are basically consistent. The feasibility of this method is proved and it can be theoretical basis for the cutterhead structure design which will improve scientific of cutterhead selection.

Experimental Study on In-Plane Behavior of CFST Arch with New-Type Dumbbell-Shaped Section

2011 ◽  
Vol 255-260 ◽  
pp. 1198-1203 ◽  
Author(s):  
Ye Sheng
Keyword(s):  
Local Buckling ◽  
High Strength ◽  
Steel Tube ◽  
Calculation Model ◽  
Plastic Behavior ◽  
Loading Process ◽  
New Type ◽  
Set Up ◽  
Ultimate Load Carrying Capacity ◽  
Shaped Section

The weakness of traditional dumbbell-shaped section is that when concrete is filled into the web space, great stress is likely to produce cracks in the weld sealing between steel tube and web plates. In order to avoid this condition, a new-type dumbbell-shaped section is proposed. Experiments on concrete filled steel tubular (CFST) model arches with new-type dumbbell-shaped section have been carried out, concentrated loading at crown and L/4 section respectively. The result indicated that the new-type CFST arch has good elastic-plastic behavior and high strength, no local buckling appeared during the whole loading process, its in-plane mechanic behavior is similar with that of the CFST arch with single-tube. The dual nonlinear finite element calculation model is set up for the model arch, by means of this model the load-deflection curves during the loading process and the ultimate load-carrying capacity is analyzed.

A RBF Neural Network Approach for Fitting Creep Curve of Sandstone

2010 ◽  
Vol 171-172 ◽  
pp. 274-277
Author(s):  
Yun Liang Tan ◽  
Ze Zhang
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Creep Curve ◽  
Bp Neural Network ◽  
Rbf Neural Network ◽  
Reference Value ◽  
Network Approach ◽  
Neural Network Approach ◽  
Training Time ◽  
Set Up

In order to quest an effective approach for predicate the rheologic deformation of sandstone based on some experimental data, an improved approaching model of RBF neural network was set up. The results show, the training time of improved RBF neural network is only about 10 percent of that of the BP neural network; the improved RBF neural network has a high predicating accuracy, the average relative predication error is only 7.9%. It has a reference value for the similar rock mechanics problem.

On the steady posture of conical spindle distribution used in ball piston pump

2019 ◽  
Vol 234 (4) ◽  
pp. 490-499
Author(s):  
Junjie Zhou ◽  
Chongbo Jing ◽  
Jianhao Liu
Keyword(s):  
Reynolds Equation ◽  
Static Pressure ◽  
Structural Parameters ◽  
Hydraulic Pump ◽  
Working Pressure ◽  
Theoretical Support ◽  
Pressure Boundary Condition ◽  
Network Method ◽  
New Type ◽  
Gap Height

Conical spindle distribution is a new type of hydraulic pump distribution, its steady working conditions refer to a stable position of the shaft and lubrication state under constant operating condition, which directly influences the hydraulic pump efficient and reliable work. In this paper, the Reynolds equation of the tapered flow field is used to establish the lubrication model. The static pressure boundary condition of the distribution pair is obtained by the hydraulic resistance network method. The finite difference method is employed to solve the model. The static and dynamic lubricating performances including the shaft eccentricity and the distribution gap height are obtained by solving the model with a numerical method. Accordingly, the influences of structural parameters and operating parameters on the steady state are investigated, and an experimental test rig is built to validate the model. The experimental results show that the model can predict the higher working pressure which leads to higher distribution gap and eccentricity; the higher the rotational speed is, the smaller the distribution gap and the eccentricity will become, which provides theoretical support for further guidance of the distribution design.

Sign in / Sign up

Export Citation Format

Share Document