Effects of Nozzle Distance on Micro Quality in 3D Printing

2014 ◽  
Vol 644-650 ◽  
pp. 4900-4904 ◽  
Author(s):  
Zhao Hui Yu ◽  
Huan Mei Wang ◽  
Guang Xue Chen
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
On Line ◽  
Inkjet Printer ◽  
Dimensional Printing ◽  
Distance Setting

The quality of forming model was influenced by the nozzle distance, during three dimensional printing. UV inkjet printer was used to complete 3D printing; the micro quality of printings under different nozzle distances were studied, and the influences of line attributes and surface attributes in micro quality caused by different nozzle distances were analyzed and discussed, in order to get the best micro quality through the nozzle distance setting. The results showed that the nozzle distance within a certain range, the influence on line attributes is greater than the influence on surface attributes caused by nozzle distance; when the nozzle distance is between 1.5-2.5mm, the micro quality of printed image is best.

scholarly journals Three-dimensional Printing in Spine Surgery: Protocol of a Systematic Review and Meta-analysis

2020 ◽  
Author(s):  
Guanli Xie ◽  
Tao Wang ◽  
Bo Jiang ◽  
Chunyan Yang ◽  
Deguang Li ◽  
...  
Keyword(s):  
3D Printing ◽  
Spinal Surgery ◽  
Three Dimensional ◽  
Clinical Heterogeneity ◽  
Three Dimensional Printing ◽  
3D Printing Technology ◽  
Randomized Controlled ◽  
Randomized Controlled Studies ◽  
Dimensional Printing

Abstract BackgroundThe complexity and diversity of spine pathology lead to the complexity and diversity of spinal surgery. The emergence and application of three-dimensional printing (3DP) technology has brought good news to surgeons and patients. However, the use of 3DP in spinal surgery remains controversial. Therefore, this study was designed to investigate whether 3D printing technology is beneficial for spinal surgery.MethodsThree English online databases including EMBASE (via embase.com), Medline (via PubMed), and Cochrane Central Register of Controlled Trials (CENTRAL) will be searched from inception until August 31, 2020. Document records retrieved according to the pre-defined search strategy will be managed by EndNote X7. The MINORST (methodological index for non-randomized studies) item recommended for non-randomized controlled interventional studies in surgery will be used to assess the quality of non-randomized controlled studies. The “Risk of bias” (ROB) table will be used to assess the quality of randomized controlled studies. The data extraction will be completed by two authors independently, one of whom extracts and the other checks. If there is any missing data, original author will be contacted to obtain the data required. Any inconsistencies were agreed upon by discussion with a third investigator. If the collected data can be synthesized, Review Manager (RevMan5.3) will be used to estimate the overall effect of 3DP for Spinal surgery. Otherwise, only the qualitative analysis will be carried out. According to the results of clinical heterogeneity test, random effects model or fixed effects model will be used for data synthesis. The sources of clinical heterogeneity will be explored by meta-regression and subgroup analysis. If more than 10 studies are included, funnel plots will be used to assess the publication bias. This review will be carried out in strict accordance with Cochrane Handbook for Systematic Reviews of Interventions.ConclusionThis study will can provide surgeons and patients with evidence-based evidence for the use of 3D printing technology in spinal surgery.Systematic review registrationPROSPERO/ID = CRD42020204053.

3D Reconstruction Role in Surgical Treatment of Sinonasal Tumours

2018 ◽  
Vol 69 (6) ◽  
pp. 1455-1457
Author(s):  
Dragos Octavian Palade ◽  
Bogdan Mihail Cobzeanu ◽  
Petronela Zaharia ◽  
Marius Dabija
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Patient Specific ◽  
Three Dimensional Printing ◽  
Great Progress ◽  
3D Printed ◽  
Medical Modeling ◽  
Dimensional Printing ◽  
Tissue Defects

Three-dimensional printing has numerous applications and has gained much interest in the medical world. The constantly improving quality of 3D-printing applications has contributed to their increased use on patients. Nowadays, 3D printing is very well integrated in the surgical practice and research. Also, the field of head and neck reconstructive surgery is constantly evolving because of the three-dimensional printing, a technology which can be widely used in a variety of situations such as reconstruction of tissue defects, surgical planning, medical modeling and prosthesis. By using 3D printing into tissue engineering and materials, it may be possible for otolaryngologists to implant 3D printed functional grafts into patients and will also provide a rapid production of personalized patient-specific devices. Advances in 3D printed implants and future tissue-engineered constructs will bring great progress to the field of otorhinolaryngology.

scholarly journals Transfiguring Healthcare: Three-Dimensional Printing in Pharmaceutical Sciences; Trends during COVID-19: A Review

2021 ◽  
pp. 207-218
Author(s):  
K. G. Siree ◽  
T. M. Amulya ◽  
T. M. Pramod Kumar ◽  
S. Sowmya ◽  
K. Divith ◽  
...  
Keyword(s):  
3D Printing ◽  
Medical Devices ◽  
Three Dimensional ◽  
Pharmaceutical Sciences ◽  
Three Dimensional Printing ◽  
Custom Made ◽  
High Degree ◽  
The Impact ◽  
Dimensional Printing ◽  
Shed Light

Three-dimensional (3D) printing is a unique technique that allows for a high degree of customisation in pharmacy, dentistry and in designing of medical devices. 3D printing satiates the increasing exigency for consumer personalisation in these fields as custom-made medicines catering to the patients’ requirements are novel advancements in drug therapy. Current research in 3D printing indicates towards reproducing an organ in the form of a chip; paving the way for more studies and opportunities to perfecting the existing technique. In addition, we will also attempt to shed light on the impact of 3D printing in the COVID-19 pandemic.

scholarly journals Three-dimensional printing for device selection in cardiology: Several key points should not be neglected

2016 ◽  
Author(s):  
Hongxing Luo ◽  
Zhongmin Wang
Keyword(s):  
3D Printing ◽  
Clinical Medicine ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Image Postprocessing ◽  
Key Points ◽  
Study Results ◽  
Recent Developments ◽  
3D Transesophageal Echocardiography ◽  
Dimensional Printing

We comment on the recent developments and problems of three-dimensional printing in cardiology. Since there are currently no standards or consensuses for 3D printing in clinical medicine and the technology is at its infancy in cardiology, it’s very important to detail the procedures to allow more similar studies to further our understandings of this novel technology. Most studies have employed computed tomography to obtain source data for 3D printing, the use of real-time 3D transesophageal echocardiography for data acquisition remains rare, so it would be very valuable and inspiring to detail the image postprocessing steps, or the reliability of the study results will be doubtful.

Ceramic calcium phosphate materials obtained by technology adapted to three-dimensional printing on inkjet printer

2013 ◽  
Vol 4 (4) ◽  
pp. 336-339 ◽  
Author(s):  
V. V. Smirnov ◽  
A. Yu. Fedotov ◽  
E. N. Antonov ◽  
V. N. Bagratashvili ◽  
S. M. Barinov ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Inkjet Printer ◽  
Dimensional Printing

scholarly journals Comparison of Presurgical Dental Models Manufactured with Two Different Three-Dimensional Printing Techniques

2020 ◽  
Vol 2020 ◽  
pp. 1-6 ◽  
Author(s):  
Marcin Metlerski ◽  
Katarzyna Grocholewicz ◽  
Aleksandra Jaroń ◽  
Mariusz Lipski ◽  
Grzegorz Trybek ◽  
...  
Keyword(s):  
3D Printing ◽  
Oral Surgery ◽  
Three Dimensional ◽  
Mean Deviation ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Reference Models ◽  
3D Printing Technology ◽  
Dimensional Printing ◽  
Printing Time

Three-dimensional printing is a rapidly developing area of technology and manufacturing in the field of oral surgery. The aim of this study was comparison of presurgical models made by two different types of three-dimensional (3D) printing technology. Digital reference models were printed 10 times using fused deposition modelling (FDM) and digital light processing (DLP) techniques. All 3D printed models were scanned using a technical scanner. The trueness, linear measurements, and printing time were evaluated. The diagnostic models were compared with the reference models using linear and mean deviation for trueness measurements with computer software. Paired t-tests were performed to compare the two types of 3D printing technology. A P value < 0.05 was considered statistically significant. For FDM printing, all average distances between the reference points were smaller than the corresponding distances measured on the reference model. For the DLP models, the average distances in the three measurements were smaller than the original. Only one average distance measurement was greater. The mean deviation for trueness was 0.1775 mm for the FDM group and 0.0861 mm for the DLP group. Mean printing time for a single model was 517.6 minutes in FDM technology and 285.3 minutes in DLP. This study confirms that presurgical models manufactured with FDM and DLP technologies are usable in oral surgery. Our findings will facilitate clinical decision-making regarding the best 3D printing technology to use when planning a surgical procedure.

Alumina-Doped Silica Gradient-Index (GRIN) Lenses by Slurry-Based Three-Dimensional Printing (S-3DP™)

2002 ◽  
Vol 758 ◽  
Author(s):  
Hong-Ren Wang ◽  
Michael J. Cima ◽  
Emanuel M. Sachs
Keyword(s):  
Complex Structure ◽  
Three Dimensional ◽  
Optical Quality ◽  
Vacuum Furnace ◽  
Gradient Index ◽  
Alumina Concentration ◽  
Graded Materials ◽  
Three Dimensional Printing ◽  
Dimensional Printing

ABSTRACTThe traditional Slurry-based Three-dimensional Printing (S-3DP™) process has been used to fabricate complex structure materials by printing organic binders in selected positions on each printing layer. This process is modified to fabricate functional graded materials, such as gradient index (GRIN) lenses, by depositing different concentrations of dopant at different positions. The modified S-3DP™ process offers advantages over conventional GRIN lens processes, including reduced processing time, improved compositional flexibility, and increased index profile dimensionality. Two different approximately parabolic dopant concentration profiles, which have maximum alumina concentrations of 1.63 mol% and 2.50 mol%, are printed into silica powder beds using S-3DP™. The samples with maximum alumina concentration of 1.63 mol% have been sintered into optical transparency at 1650 0C for 30 minutes in a vacuum furnace (5×10-6 torr) while an additional dehydration process before sintering was required for the samples with maximum alumina concentration of 2.50 mol%. The magnifying effects of GRIN lenses with profiles of 1.63 mol% and 2.50 mol% alumina were observed, yielding effective focal lengths of 10 cm and 6.1 cm, respectively. Light diffraction, which results from the locally inhomogeneous dopant distribution and reduces the optical quality of GRIN lenses, was also observed.

Manufacture of an Unmanned Aerial Vehicle (UAV) for Advanced Project Design Using 3D Printing Technology

2013 ◽  
Vol 397-400 ◽  
pp. 970-980 ◽  
Author(s):  
Noor A. Ahmed ◽  
J.R. Page
Keyword(s):  
3D Printing ◽  
Unmanned Aerial Vehicle ◽  
Three Dimensional ◽  
Small Scale ◽  
Project Design ◽  
Test Model ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Aerial Vehicle ◽  
Dimensional Printing

The phenomenal growth in three-dimensional printing technology has the potential of ushering in the next wave of industrial revolution. As part of an advanced project design conducted at the Aerospace Engineering of the University of New South, the concept of a printable unmanned aerial vehicle was explored. A subsequent small scale test model was manufactured using three-dimensional printing technology for wind tunnel testing and validation. The exercise demonstrates the huge potential of such printing technology in future aircraft designs.Key words: 3D printing, design, manufacture, UAV

scholarly journals Current research in development of polycaprolactone filament for 3D bioprinting: a review

2021 ◽  
Vol 926 (1) ◽  
pp. 012080
Author(s):  
C Amni ◽  
Marwan ◽  
S Aprilia ◽  
E Indarti
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Development Stage ◽  
Biological Properties ◽  
Fabrication Process ◽  
3D Bioprinting ◽  
Three Dimensional Printing ◽  
Further Development ◽  
Dimensional Printing ◽  
The Ideal

Abstract Three-dimensional printing (3DP) provides a fast and easy fabrication process without demanding post-processing. 3D-bioprinting is a special class in 3DP. Bio-printing is the process of accurately 3DP structural design using filament. 3D bio-printing technology is still in the development stage, its application in various engineering continues to increase, such as in tissue engineering. As a forming material in 3D printing, many types of commercial filaments have been developed. Filaments can be produced from either natural or synthetic biomaterials alone, or a combination of the two as a hybrid material. The ideal filament must have precise mechanical, rheological and biological properties. Polycaprolactone (PCL) is specifically developed and optimized for bio-printing of 3D structures. PCL is a strategy in 3D printing to better control interconnectivity and porosity spatially. Structural stability and less sensitive properties environmental conditions, such as temperature, humidity, etc make PCL as an ideal material for the FDM fabrication process. In this review, we provide an in-depth discussion of current research on PCL as a filament currently used for 3D bio-printing and outline some future perspectives in their further development.

Sign in / Sign up

Export Citation Format

Share Document