Comparison of Rate-Dependent Ferroelectroelastic Phenomenological Models for Prediction of PZT Creep

2015 ◽  
Vol 725-726 ◽  
pp. 961-966
Author(s):  
Artem S. Semenov ◽  
Sviatoslav Lobanov

The time-dependent effects of piezoceramic material under the constant electric field are analyzed. The new rate-dependent ferroelectroelastic phenomenological model is proposed and compared with known models and experimental data.

2007 ◽  
Vol 21 (19) ◽  
pp. 1239-1252 ◽  
Author(s):  
XIAO-FENG PANG ◽  
BO DENG ◽  
HUAI-WU ZHANG ◽  
YUAN-PING FENG

The temperature-dependence of proton electric conductivity in hydrogen-bonded molecular systems with damping effect was studied. The time-dependent velocity of proton and its mobility are determined from the Hamiltonian of a model system. The calculated mobility of (3.57–3.76) × 10-6 m 2/ Vs for uniform ice is in agreement with the experimental value of (1 - 10) × 10-2 m 2/ Vs . When the temperature and damping effects of the medium are considered, the mobility is found to depend on the temperature for various electric field values in the system, i.e. the mobility increases initially and reaches a maximum at about 191 K, but decreases subsequently to a minimum at approximately 241 K, and increases again in the range of 150–270 K. This behavior agrees with experimental data of ice.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Mykhaylo Tkach ◽  
Serhii Morhun ◽  
Yuri Zolotoy ◽  
Irina Zhuk

AbstractNatural frequencies and vibration modes of axial compressor blades are investigated. A refined mathematical model based on the usage of an eight-nodal curvilinear isoparametric finite element was applied. The verification of the model is carried out by finding the frequencies and vibration modes of a smooth cylindrical shell and comparing them with experimental data. A high-precision experimental setup based on an advanced method of time-dependent electronic interferometry was developed for this aim. Thus, the objective of the study is to verify the adequacy of the refined mathematical model by means of the advanced time-dependent electronic interferometry experimental method. The divergence of the results of frequency measurements between numerical calculations and experimental data does not exceed 5 % that indicates the adequacy and high reliability of the developed mathematical model. The developed mathematical model and experimental setup can be used later in the study of blades with more complex geometric and strength characteristics or in cases when the real boundary conditions or mechanical characteristics of material are uncertain.


2015 ◽  
Vol 29 (29) ◽  
pp. 1550206
Author(s):  
A. I. Agafonov

In this paper, using the Boltzmann transport equation, we study the zero temperature resistance of perfect metallic crystals of a finite thickness d along which a weak constant electric field E is applied. This resistance, hereinafter referred to as the phonon residual resistance, is caused by the inelastic scattering of electrons heated by the electric field, with emission of long-wave acoustic phonons and is proportional to [Formula: see text]. Consideration is carried out for Cu, Ag and Au perfect crystals with the thickness of about 1 cm, in the fields of the order of 1 mV/cm. Following the Matthiessen rule, the resistance of the pure crystals, the thicknesses of which are much larger than the electron mean free path is represented as the sum of both the impurity and phonon residual resistances. The condition on the thickness and field is found at which the low-temperature resistance of pure crystals does not depend on their purity and is determined by the phonon residual resistivity of the ideal crystals. The calculations are performed for Cu with a purity of at least 99.9999%.


2017 ◽  
Vol 767 ◽  
pp. 431-436 ◽  
Author(s):  
Bo Zhang ◽  
Zhi-meng Zhang ◽  
Wei Hong ◽  
Shu-Kai He ◽  
Jian Teng ◽  
...  

Author(s):  
C. Boone ◽  
M. Fuest ◽  
K. Wellmerling ◽  
S. Prakash

Nanofluidic field effect devices feature a gate electrode embedded in the nanochannel wall. The gate electrode creates local variation in the electric field allowing active, tunable control of ionic transport. Tunable control over ionic transport through nanofluidic networks is essential for applications including artificial ion channels, ion pumps, ion separation, and biosensing. Using DC excitation at the gate, experiments have demonstrated multiple current states in the nanochannel, including the ability to switch off the measured current; however, experimental evaluation of transient signals at the gate electrode has not been explored. Modeling results have shown ion transport at the nanoscale has known time scales for diffusion, electromigration, and convection. This supports the evidence detailed here that use of a time-dependent signal to create local perturbation in the electric field can be used for systematic manipulation of ionic transport in nanochannels. In this report, sinusoidal waveforms of various frequencies were compared against DC excitation on the gate electrode. The ionic transport was quantified by measuring the current through the nanochannels as a function of applied axial and gate potentials. It was found that time varying signals have a higher degree of modulation than a VRMS matched DC signal.


Sign in / Sign up

Export Citation Format

Share Document