Stability Bearing Capacity of Dendritic Arms in Tainter Gate

2015 ◽  
Vol 733 ◽  
pp. 464-467
Author(s):  
Yong Kang Shen ◽  
Zheng Zhong Wang ◽  
Chun Long Zhao
Keyword(s):  
Stability Analysis ◽  
Bearing Capacity ◽  
Effective Length ◽  
Analysis Method ◽  
Analysis Model ◽  
Minimum Potential Energy ◽  
Stability Bearing Capacity ◽  
Minimum Potential ◽  
The Stability ◽  
Radial Gate

The new arms form of radial gate—dendritic arms is introduced for the proper mechanical mechanism, however the stability design is very difficult. According to the stability theory of structure, the stability analysis model of step column with lateral restraints was proposed for dendritic arms, some equations was derived from the principle of minimum potential energy, the practical formulas of buckling bearing capacity and effective length coefficient were provided. According to an example, the accuracy on formulas was verified by finite analysis method.

Applicability Study on Method of Stability Analysis for Suspendome Structures

2010 ◽  
Vol 163-167 ◽  
pp. 1916-1923
Author(s):  
Kai Rong Shi ◽  
Zheng Rong Jiang ◽  
Shi Tong Wang
Keyword(s):  
Stability Analysis ◽  
Steel Structures ◽  
Hybrid Structure ◽  
Analysis Method ◽  
Buckling Mode ◽  
Stability Bearing Capacity ◽  
Geometrical Imperfections ◽  
New Type ◽  
Analytical Result ◽  
The Stability

Consistent Mode Imperfections Method based on eigenvalue buckling mode is widely adopted in the stability analysis for the spatial steel structures with initial geometrical imperfections, i.e. latticed shells, thin shells, etc. Taking the new type hybrid structure of suspendome as the analytical object, the applicability of Consistent Mode Imperfections Method is discussed. The effects on structural stability are probed arisen by the factors such as different initial reference loads and different order eigenvalue buckling modes. It is indicated that this stability analysis method can be quite fit for the spatial structures such as latticed shells, while for suspendomes, the initial reference load has a distinct effect upon the analytical result obtained by the stability analysis method. Moreover, it is not always to dominate calculating result when selecting the first order eigenvalue buckling mode as the distributing pattern of initial geometrical imperfections. As a result, some measures should be taken to improve the accuracy in evaluating the stability bearing capacity of the structures with Consistent Mode Imperfections Method based on eigenvalue buckling mode.

Beam-Shell Compound Finite Strip for the Elastic Stability Analysis of Multi-Trough Rectangle Aquedcut

2010 ◽  
Vol 163-167 ◽  
pp. 1385-1390
Author(s):  
Wei Xu ◽  
Liang Huang ◽  
Bo Wang
Keyword(s):  
Stability Analysis ◽  
Elastic Stability ◽  
Minimum Potential Energy ◽  
Buckling Mode ◽  
Finite Strip ◽  
Strip Method ◽  
Finite Strip Method ◽  
Minimum Potential ◽  
Buckling Coefficient ◽  
The Stability

A mathematical model using the beam-shell compound finite strip method is established to study the elastic stability analysis of multi-trough rectangle aqueducts. The impacts of the transverse stiffeners and crossbars for the model are taken into account. The principle of minimum potential energy is used to deduce the eigenvalue equation for elastic stability problems. To verify the accuracy and efficiency of the beam-shell compound finite strip method, the numerical solution of the stability analysis for an actual aqueduct is calculated through the established model and other FEM methods. The result of the stability analysis for an actual aqueduct shows that: the buckling coefficient is reduced as the water level increasing while buckling mode remaining constant; and prestressed load has a great impact on not only the buckling coefficient but also buckling mode.

scholarly journals Modelling and Stability Analysis of Articulated Vehicles

2021 ◽  
Vol 11 (8) ◽  
pp. 3663
Author(s):  
Tianlong Lei ◽  
Jixin Wang ◽  
Zongwei Yao
Keyword(s):  
Stability Analysis ◽  
Critical Velocity ◽  
Equations Of State ◽  
Steering System ◽  
Analysis Model ◽  
Nonlinear Dynamic Model ◽  
Equilibrium Equations ◽  
Eigenvalue Method ◽  
Articulated Vehicles ◽  
The Stability

This study constructs a nonlinear dynamic model of articulated vehicles and a model of hydraulic steering system. The equations of state required for nonlinear vehicle dynamics models, stability analysis models, and corresponding eigenvalue analysis are obtained by constructing Newtonian mechanical equilibrium equations. The objective and subjective causes of the snake oscillation and relevant indicators for evaluating snake instability are analysed using several vehicle state parameters. The influencing factors of vehicle stability and specific action mechanism of the corresponding factors are analysed by combining the eigenvalue method with multiple vehicle state parameters. The centre of mass position and hydraulic system have a more substantial influence on the stability of vehicles than the other parameters. Vehicles can be in a complex state of snaking and deviating. Different eigenvalues have varying effects on different forms of instability. The critical velocity of the linear stability analysis model obtained through the eigenvalue method is relatively lower than the critical velocity of the nonlinear model.

scholarly journals Analysis and Calculation of Stability Coefficients of Cross-Laminated Timber Axial Compression Member

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4267
Author(s):  
Qi Ye ◽  
Yingchun Gong ◽  
Haiqing Ren ◽  
Cheng Guan ◽  
Guofang Wu ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Axial Compression ◽  
Calculation Method ◽  
National Standards ◽  
Test Results ◽  
Average Deviation ◽  
Stability Coefficient ◽  
Cross Laminated Timber ◽  
Stability Bearing Capacity ◽  
The Stability

Cross-laminated timber (CLT) elements are becoming increasingly popular in multi-storey timber-based structures, which have long been built in many different countries. Various challenges are connected with constructions of this type. One such challenge is that of stabilizing the structure against vertical loads. However, the calculations of the stability bearing capacity of the CLT members in axial compression in the structural design remains unsolved in China. This study aims to determine the stability bearing capacity of the CLT members in axial compression and to propose the calculation method of the stability coefficient. First, the stability coefficient calculation theories in different national standards were analyzed, and then the stability bearing capacity of CLT elements with four slenderness ratios was investigated. Finally, based on the stability coefficient calculation formulae in the GB 50005-2017 standard and the regression method, the calculation method of the stability coefficient for CLT elements was proposed, and the values of the material parameters were determined. The result shows that the average deviation between fitting curve and calculated results of European and American standard is 5.43% and 3.73%, respectively, and the average deviation between the fitting curve and the actual test results was 8.15%. The stability coefficients calculation formulae could be used to predict the stability coefficients of CLT specimens with different slenderness ratios well.

scholarly journals BUNDLE ADJUSTMENT-BASED STABILITY ANALYSIS METHOD WITH A CASE STUDY OF A DUAL FLUOROSCOPY IMAGING SYSTEM

2018 ◽  
Vol IV-2 ◽  
pp. 9-16 ◽  
Author(s):  
K. Al-Durgham ◽  
D. D. Lichti ◽  
I. Detchev ◽  
G. Kuntze ◽  
J. L. Ronsky
Keyword(s):  
Stability Analysis ◽  
Imaging System ◽  
Parameters Estimation ◽  
System Stability ◽  
Single Camera ◽  
Calibration Data ◽  
Analysis Method ◽  
Advantages And Disadvantages ◽  
Camera Imaging ◽  
The Stability

A fundamental task in photogrammetry is the temporal stability analysis of a camera/imaging-system’s calibration parameters. This is essential to validate the repeatability of the parameters’ estimation, to detect any behavioural changes in the camera/imaging system and to ensure precise photogrammetric products. Many stability analysis methods exist in the photogrammetric literature; each one has different methodological bases, and advantages and disadvantages. This paper presents a simple and rigorous stability analysis method that can be straightforwardly implemented for a single camera or an imaging system with multiple cameras. The basic collinearity model is used to capture differences between two calibration datasets, and to establish the stability analysis methodology. Geometric simulation is used as a tool to derive image and object space scenarios. Experiments were performed on real calibration datasets from a dual fluoroscopy (DF; X-ray-based) imaging system. The calibration data consisted of hundreds of images and thousands of image observations from six temporal points over a two-day period for a precise evaluation of the DF system stability. The stability of the DF system – for a single camera analysis – was found to be within a range of 0.01 to 0.66 mm in terms of 3D coordinates root-mean-square-error (RMSE), and 0.07 to 0.19 mm for dual cameras analysis. It is to the authors’ best knowledge that this work is the first to address the topic of DF stability analysis.

Stability Analysis of Plate-Cone Reticulated Shell

2011 ◽  
Vol 71-78 ◽  
pp. 3760-3763
Author(s):  
Xing Wang
Keyword(s):  
Stability Analysis ◽  
Bearing Capacity ◽  
Double Layer ◽  
Geometrical Nonlinearity ◽  
Ultimate Bearing Capacity ◽  
Arc Length ◽  
Stability Behavior ◽  
Destruction Mechanism ◽  
The Stability ◽  
Complete Process

This paper carries out stability analysis on plate-cone reticulated shell considering geometrical nonlinearity of cooperating work between plates and members. In this paper, stability behavior of different kinds of plate-cone reticulated shell considering geometrical nonlinearity is analyzed by using the software ANSYS, tracking complete process balance path for load-displacement by using arc-length method, the several problems of plate-cone reticulated shell are studied, such as destruction mechanism, structural ductility, ultimate bearing capacity and strength reserve, some important conclusions are obtained. After analyzing the stability behavior of double-layer reticulated shell by ANSYS and comparing with plate-cone reticulated shell, it is proved that plate-cone reticulated shell is more advantageous than double-layer reticulated shell in the aspect of stability behavior.

Lattice hydrodynamic model for bidirectional pedestrian flow with the consideration of pedestrian density difference

2015 ◽  
Vol 26 (08) ◽  
pp. 1550092 ◽  
Author(s):  
Jie Zhou ◽  
Zhong-Ke Shi
Keyword(s):  
Stability Analysis ◽  
Hydrodynamic Model ◽  
Density Difference ◽  
Subway Station ◽  
Lattice Hydrodynamic Model ◽  
Analysis Method ◽  
Pedestrian Flow ◽  
Reaction Coefficient ◽  
De Vries ◽  
The Stability

Considering the effect of density difference, an extended lattice hydrodynamic model for bidirectional pedestrian flow is proposed in this paper. The stability condition is obtained by the use of linear stability analysis. It is shown that the stability of pedestrian flow varies with the reaction coefficient of density difference. Based on nonlinear analysis method, the Burgers, Korteweg–de Vries (KdV) and modified Korteweg–de Vries (MKdV) equations are derived to describe the triangular shock waves, soliton waves and kink–antikink waves in the stable, metastable and unstable regions, respectively. The results show that jams may be alleviated by considering the effect of density difference. The findings also indicate that in the process of building and subway station design, a series of auxiliary facilities should be considered in order to alleviate the possible pedestrian jams.

scholarly journals Stability Analysis of a Direct-Operated Seawater Hydraulic Relief Valve under Deep Sea

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Shan Wu ◽  
Chao Li ◽  
Yipan Deng
Keyword(s):  
Stability Analysis ◽  
Deep Sea ◽  
Great Influence ◽  
Mathematic Model ◽  
Time Domain Analysis ◽  
Domain Analysis ◽  
Frequency Domain Analysis ◽  
Analysis Method ◽  
Relief Valve ◽  
The Stability

Taking into account the deformation of a designed direct-operated seawater hydraulic relief valve in deep sea, which might have a great influence on the stability of the valve, a mathematic model of the relief valve was established and stability analysis was conducted. As the fitting clearances between the damping sleeve and the damping bar play a key role in the performance of the relief valve, the fitting clearances after deformation under pressure of different ocean depths were obtained using finite element method. Applying the deformation data to the relief valve model, the stability and relative stability could be analyzed quantitatively through both the frequency domain analysis method and the time domain analysis method to detect the influence of the fitting clearance after deformation. The simulation results show that the seawater relief valve has a stable performance within 4000 meters deep under the sea.

scholarly journals Effect of Frequency Coupling on Stability Analysis of a Grid-Connected Modular Multilevel Converter System

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6580
Author(s):  
Yixing Wang ◽  
Qianming Xu ◽  
Josep M. Guerrero
Keyword(s):  
Stability Analysis ◽  
Coupling Effect ◽  
Modular Multilevel Converter ◽  
Stability Assessment ◽  
Analysis Method ◽  
Multilevel Converter ◽  
Single Input Single Output ◽  
Impedance Model ◽  
Frequency Coupling ◽  
The Stability

Due to the internal dynamics of the modular multilevel converter (MMC), the coupling between the positive and negative sequences in impedance, which is defined as frequency coupling, inherently exists in MMC. Ignoring the frequency coupling of the MMC impedance model may lead to inaccurate stability assessment, and thus the multi-input multi-output (MIMO) impedance model has been developed to consider the frequency coupling effect. However, the generalized Nyquist criterion (GNC), which is used for the stability analysis of an MIMO model, is more complicated than the stability analysis method applied on single-input-single-output (SISO) models. Meanwhile, it is not always the case that the SISO model fails in the stability assessment. Therefore, the conditions when the MIMO impedance model needs to be considered in the stability analysis of an MMC system should be analyzed. This paper quantitatively analyzes the effect of frequency coupling on the stability analysis of grid-connected MMC, and clarifies the frequency range and grid conditions that the coupling effect required to be considered in the stability analysis. Based on the quantitative relations between the frequency coupling and the stability analysis of the grid-connected MMC system, a simple and accurate stability analysis method for the grid-connected MMC system is proposed, where the MIMO impedance model is applied when the frequency coupling has a significant effect and the SISO impedance model is used if the frequency coupling is insignificant.

Topological Synthesis for Linkage Mechanism Design Using the Minimum Potential Energy Principle

2005 ◽  
Author(s):  
Hae Chang Gea ◽  
Jaehyun Kwon
Keyword(s):  
Potential Energy ◽  
Mechanism Design ◽  
Compliant Mechanism ◽  
Analysis Method ◽  
Dimensional Synthesis ◽  
Linkage Mechanism ◽  
Minimum Potential Energy ◽  
Minimum Potential ◽  
Number Synthesis ◽  
Topological Synthesis

A mechanism is a device transmits motion in a predetermined manner in order to accomplish specific objectives. Mechanism design can be divided into three steps: type synthesis, number synthesis and dimensional synthesis, where the number synthesis is also called topological synthesis. In this paper, a new approach for topological synthesis and dimensional synthesis of linkage mechanism design with pin joints is presented. This approach is based on the discrete element approach which always provides clear definitions of number of linkages and joints. In order to extend its applications beyond the compliant mechanism, a novel analysis method based on the principle of minimum potential energy for linkage topology optimization is employed. Unlike the traditional FEM based approaches, this novel analysis method can be applied to multiple joint linkage designs directly. Genetic Algorithm is chosen as the optimizer. Finally, a few design examples from the proposed method are presented.

Sign in / Sign up

Export Citation Format

Share Document