Analysis of Dropped-Call Probability in Relay-Based High Speed Railway Environment

2015 ◽  
Vol 738-739 ◽  
pp. 1129-1132
Author(s):  
Yun Ze Li ◽  
Xin Yu Jin ◽  
Duan Po Wu
Keyword(s):  
Wireless Communication ◽  
High Speed ◽  
Base Stations ◽  
Call Rate ◽  
Coverage Area ◽  
High Speed Railway ◽  
Ping Pong ◽  
Order Of Magnitude

In poor coverage area of high-speed railway, the frequent handoff will increase the dropped-call rate. An approach to improving the quality of wireless communication is adding a relay between two base stations. Paper is about analyzing the dropped-call caused by handoff in this scene. This paper proposed a model for dropped-call probability through analyzing the handoff probability, same frequency interference and ping-pong handoff. Based on the simulation and comparison of the dropped-call model, we found that putting a relay between the base stations can significantly improve the dropped-call problem, and the peek rate of dropped-call decreased by an order of magnitude.

Design and Implementation of an Efficient Parallel LFSR Architecture for Wireless Communication Systems

2019 ◽  
Vol 14 ◽  
Author(s):  
A. Suresh Babu ◽  
B. Anand
Keyword(s):  
Wireless Communication ◽  
Power Consumption ◽  
Low Power ◽  
Communication Systems ◽  
High Speed ◽  
Design Tool ◽  
Shift Register ◽  
Linear Feedback ◽  
Wireless Communication Systems ◽  
Coverage Area

: A Linear Feedback Shift Register (LFSR) considers a linear function typically an XOR operation of the previous state as an input to the current state. This paper describes in detail the recent Wireless Communication Systems (WCS) and techniques related to LFSR. Cryptographic methods and reconfigurable computing are two different applications used in the proposed shift register with improved speed and decreased power consumption. Comparing with the existing individual applications, the proposed shift register obtained >15 to <=45% of decreased power consumption with 30% of reduced coverage area. Hence this proposed low power high speed LFSR design suits for various low power high speed applications, for example wireless communication. The entire design architecture is simulated and verified in VHDL language. To synthesis a standard cell library of 0.7um CMOS is used. A custom design tool has been developed for measuring the power. From the results, it is obtained that the cryptographic efficiency is improved regarding time and complexity comparing with the existing algorithms. Hence, the proposed LFSR architecture can be used for any wireless applications due to parallel processing, multiple access and cryptographic methods.

Determination of Cell Coverage Area and its Applications in High-Speed Railway Environments

2017 ◽  
Vol 66 (5) ◽  
pp. 3515-3525 ◽  
Author(s):  
Bo Ai ◽  
Ruisi He ◽  
Guangkai Li ◽  
Ke Guan ◽  
Danping He ◽  
...  
Keyword(s):  
High Speed ◽  
Coverage Area ◽  
High Speed Railway ◽  
Cell Coverage

scholarly journals A Fast Hybrid Beamforming Scheme for High-Speed Railway Communications

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 998
Author(s):  
Yu Xiao ◽  
Gang Qiu ◽  
Yafeng Wang
Keyword(s):  
High Speed ◽  
Low Complexity ◽  
Spectrum Efficiency ◽  
System Throughput ◽  
Quality Of Services ◽  
Communication Service ◽  
High Speed Railway ◽  
High Speed Trains ◽  
Hybrid Beamforming

With the increasingly demand for reliable mobile communication service in the high-speed railway (HSR) system, the service stability of HSR communication is of great concern in recent research. Focusing on ensuring the quality of services (QoS) and system throughput, massive multi-input multi-output (massive MIMO) and beamforming technologies have been widely applied. In this paper, aiming to minimize the communication outage probability (OP) and not to decrease spectrum efficiency (SE) too much, we propose a fast HBF (F-HBF) scheme for HSR communications. The proposed scheme uses a low-complexity beam-searching algorithm to trace high-speed trains in real time. The simulation results verify that the proposed scheme can significantly reduce OP without too much SE degradation.

scholarly journals A Study on the Practical Carrying Capacity of Large High-Speed Railway Stations considering Train Set Utilization

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Bin Guo ◽  
Leishan Zhou ◽  
Yixiang Yue ◽  
Jinjin Tang
Keyword(s):  
Carrying Capacity ◽  
High Speed ◽  
Programming Model ◽  
High Speed Railway ◽  
Railway Stations ◽  
China Studies ◽  
Important Nodes ◽  
Entire Network

Methods for solving the carrying capacity problem for High-Speed Railways (HSRs) have received increasing attention in the literature in the last few years. As important nodes in the High-Speed Railway (HSR) network, large stations are usually the carrying capacity bottlenecks of the entire network due to the presence of multiple connections in different directions and the complexity of train operations at these stations. This paper focuses on solving the station carrying capacity problem and considers train set utilization constraints, which are important influencing factors that have rarely been studied by previous researchers. An integer linear programming model is built, and the CPLEX v12.2 software is used to solve the model. The proposed approach is tested on a real-world case study of the Beijing South Railway Station (BS), which is one of the busiest and most complex stations in China. Studies of the impacts of different train set utilization constraints on the practical station carrying capacity are carried out, and some suggestions are then presented for enhancing the practical carrying capacity. Contrast tests indicate that both the efficiency of the solving process and the quality of the solution show huge breakthroughs compared with the heuristic approach.

Survey on High-Speed Railway Train Plan Design Issues

2014 ◽  
Vol 505-506 ◽  
pp. 489-492 ◽  
Author(s):  
Peng Fei Zhou ◽  
Bao Ming Han ◽  
Qi Zhang
Keyword(s):  
High Speed ◽  
High Speed Railway ◽  
Transportation Services ◽  
Passenger Train ◽  
Train Operation ◽  
Railway Passenger ◽  
Railway Operation ◽  
Important Basis ◽  
Train Plan

High-speed railway passenger train operation plan is an important basis to ensure the quality of transportation services. With construction and development of the country's high-speed railway, design and evaluation of railway passenger train plan theory need to be improved and perfected. On the basis of reading and studying a large amount of the references, this paper summarizes the domestic and overseas high-speed running railway operation modes, the high speed railway train operation programs design and other aspects. Besides, according to the related problems and shortcomings, this paper illustrates the meanings and necessities of analyzing the high-speed railway passenger train program.

Sign in / Sign up

Export Citation Format

Share Document