The Influence of Chloride Environment on Compressive Strength of Geopolymer Concrete with Fly Ash Using Taguchi Approach

2015 ◽  
Vol 754-755 ◽  
pp. 400-405 ◽  
Author(s):  
Ridho Bayuaji ◽  
Muhammad Sigit Darmawan ◽  
Boedi Wibowo ◽  
Nur Ahmad Husin ◽  
Srie Subekti ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Design Method ◽  
Construction Material ◽  
Strength Test ◽  
National Standard ◽  
Concrete Composition ◽  
Compressive Strength Test ◽  
Experimental Design Method ◽  
Chloride Environment

This study is conducted to determine the effect of four variables on compressive strength of geopolymer concretes. These four variables are binder/aggregate, Alkalinene/fly ash, effect of superplasticizer (SP) addition and curing system. The compressive strength is important mechanical properties for construction material. Taguchi experimental design method is used to compile the concrete composition of geopolymer to achieve the maximum compressive strength. Specimens concrete used is a cylinder with 100 mm diameter and 200 mm height. Compressive strength test is performed at 28 day using SNI 03-6825-2002, Indonesian National Standard. This study concludes that the chloride environment has a beneficial effect on the compressive strength of the concrete. In addition, the Alkalinene/fly ash ratio and binder/aggregate give a significant effect on the compressive strength of geopolymer concretes.

The Effect of Chloride Environment on Mechanical Properties Geopolymer Binder with Fly Ash

2013 ◽  
Vol 594-595 ◽  
pp. 648-655 ◽  
Author(s):  
Muhammad Sigit Darmawan ◽  
Ridho Bayuaji ◽  
Boedi Wibowo ◽  
Nur Ahmad Husin ◽  
Srie Subekti
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Design Method ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
National Standard ◽  
Vacuum Saturation ◽  
Chloride Environment

This study is conducted to determine the effect of five variables on mechanical properties of geopolymer binders. These five variables are chloride environment, NaOH molarity, Na2SiO3/NaOH ratio, fly ash/alkaline activator (FA/AA) ratio and superplasticizer (SP) addition. The mechanical properties considered are compressive strength, porosity and density. Taguchi experimental design method is used to compile the binder composition of geopolymer to achieve the maximum compressive strength. Specimens binder used is a cylinder with 25 mm diameter and 50 mm height. Compressive strength test is performed at 28 days using SNI 03-6825-2002 (Indonesian National Standard) and porosity of the binder is determined using vacuum saturation apparatus similar to that developed by RILEM. The density of the binder is measured using Ultrasonic Pulse Velocity (UPV). This study concludes that the chloride environment has a beneficial effect on the compressive strength of the binder. In addition, the FA/AA ratio and NaOH molarity give a significant effect on the compressive strength of geopolymer binders.

scholarly journals Effect of nano CaCO3 on durability of concrete

2020 ◽  
Vol 165 ◽  
pp. 03029
Author(s):  
Jiangong Yang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Test Data ◽  
Building Materials ◽  
Strength Test ◽  
Practical Application ◽  
Compressive Strength Test ◽  
Different Content ◽  
Durability Of Concrete

Through comparatively analyzing the impermeability and compressive strength test data of nano CaCO3 concrete with different content, this paper puts forward the method of optimizing the durability of nano CaCO3 concrete, and studies the influence of the content of fly ash on the durability of nano CaCO3 concrete on this basis, so as to provide a reference for improving the durability of concrete, so as to improve the recycling and reusing efficiency of building materials, and accelerate the practical application of nano CaCO3 concrete in engineering.

scholarly journals Potency Of Sugarcane Bagasse Ash Partial Substitution Of Cement In Concrete

2019 ◽  
Author(s):  
Ismail Marzuki ◽  
Erniati Bachtiar ◽  
ASRI MULYA SETIAWAN ◽  
SRIGUSTY
Keyword(s):  
Compressive Strength ◽  
Sugarcane Bagasse ◽  
Construction Material ◽  
Standard Condition ◽  
Strength Test ◽  
Test Method ◽  
Partial Substitution ◽  
Sugar Factory ◽  
Compressive Strength Test ◽  
Sugarcane Bagasse Ash

the availability of sugarcane bagasse ash produced by Arasoe Sugar Factory, it is not used utilized. That sugarcane bagasse ash has size very fine that it can pollute the air. The sugarcane bagasse ash has silicate content, and it has pozzolan properties. The needs of construction material are something that to think about that. It is an alternative to substitute the using of cement in concrete construction. This study is aimed to find the potential of sugarcane bagasse ash in Arasoe Sugar Factory for partial substitution of cement in concrete. The sample made from the variety of sugarcane bagasse ash 0%, 2.5%, 5%, and 7.5% as partial substitution of cement in concrete. The ratio of water and cement is 0.45. The specimen of concrete is taken care in standard condition at the laboratory and compressive strength test when the sample is in 28, 45, and 62 days old. The compressive strength test refers to ASTM C39/ C39M-01 (Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens). The development of compressive strength of concrete with many variations of sugarcane bagasse ash 0% 2.5%, 5% is increasing along with the age of concrete, however in contrast with 7.5% of sugarcane bagasse ash the decreasing in 60 days old later. Partial substitute of sugarcane bagasse ash in concrete is possible to do in an amount about 5% of sugarcane bagasse ash

scholarly journals Analysis of The Mechanical Properties of Concrete Based on Fly Ash and Palm Oil Clinkers

2021 ◽  
Vol 1 (4) ◽  
pp. 31-35
Author(s):  
L Opirina ◽  
Azwanda Azwanda ◽  
R Febrianto
Keyword(s):  
Fly Ash ◽  
Palm Oil ◽  
Strength Test ◽  
Fine Aggregate ◽  
Concrete Composition ◽  
Conventional Concrete ◽  
Concrete Material ◽  
Compressive Strength Test ◽  
Concrete Mix ◽  
Main Material

Concrete is the result of a mixture of cement, aggregate and water. Under certain conditions, the concrete mixture can be added with additives and admixture to get the concrete as needed. Cement is the most important material in the manufacture of conventional concrete. When cement is produced, the same amount of CO2 will also be generated as a side effect and pollute the atmosphere. Fly ash as an alternative to cement will be introduced as an alternative concrete material to reduce the use of cement in the concrete mix. In addition to the use of charcoal fly ash as a partial substitute for cement, this study also uses palm oil clinkers as a substitute for fine aggregate as much as 20%. This replacement material is an industrial waste which has the main content of silica and alumina which is similar to the main material for forming concrete. In addition, the use of these two materials also aims to reduce the exploration of the use of natural materials. This research introduces 3 kinds of concrete composition. The grouping is based on the ratio of fly ash and cement used, namely (60%:40%), (70%:30%) and (80%:20%). The test object used is a concrete cylinder with a diameter of 150 mm and a height of 300 mm. Tests were carried out at the age of 28 days of concrete. The compressive strength test showed that the best concrete was produced from the combination of the addition of 60% fly ash of coal aged 28 days, which was 4.21 MPa.

scholarly journals Compressive Strength of Fly Ash Based Geopolymer Concrete Addition with Fibers

2020 ◽  
pp. 57-61
Author(s):  
B Anitha Rani V Bhargavi,
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Construction Material ◽  
Polypropylene Fibers ◽  
Geopolymer Concrete ◽  
Inorganic Polymers ◽  
Cement Production ◽  
Compressive Strength Test ◽  
New Generation ◽  
Day By Day

Concrete is the most widely used construction material all over the world. The quantity of the water plays an important role in the preparation of concrete. And the demand of concrete is increasing day by day and cement is used for satisfying the need of development of infrastructure facilities, 1 tonne cement production generates 1 tonne CO2, which adversely affect the environment. In order to reduce the use of OPC and CO2 generation, the new generation concrete has been developed such as Geopolymer concrete (GPC). Geopolymers are inorganic polymers and their chemical composition is similar to natural materials. Geopolymer binders are the alternatives in the development of acid resistant concrete i.e. durability of concrete. Geopolymer concrete is produced using Fly ash at 100% replacement to cement and binders like NaOH, Na2SiO3 to ignite the geopolymerisation. Many studies were carried out on properties of geopolymer concrete. This study focuses on enhancing the strength of geopolymer concrete by using fibers. 60% polyester and 40% polypropylene fibers are added to geopolymer concrete addition with Fly ash content. The trail mixes were casted with addition of fibers at different percentages like (0.20, 0.25, 0.30, 0.35, 0.40, 0.45 and 0.50 %). Then samples were air-cured for 28 days at ambient temperature. Compressive strength test is conducted on the samples after 3, 7 and 28 days. The optimum value is obtained at 0.40% addition of fibers when compared to nominal mix(GPC).

Study on the Strength Characteristics of Sludge Solidification

2015 ◽  
Vol 744-746 ◽  
pp. 628-631
Author(s):  
Yi Xiang Chen ◽  
Kai Xi An ◽  
Ke Xin Zhou ◽  
Chen Hao Xu
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Unconfined Compressive Strength ◽  
Strength Test ◽  
Experimental Results ◽  
Strength Characteristics ◽  
Curing Agent ◽  
Foundation Treatment ◽  
Compressive Strength Test ◽  
Stabilized Soil

In order to reveal the effect of type of admixture and its content on the strength of stabilized soil, this paper uses the sludge as raw soil and cement, fly ash as curing agent, and analyzes the strength characteristics of samples mixed stabilized according to certain content. Using the unconfined compressive strength test, the compressive strength of the samples is tested. The effect of curing agent type and its content on the compressive strength is investigated. From the experimental results, it can be seen that the content of cement and fly ash has much effect on the strength. The conclusions obtained can have some conference values on the foundation treatment and reuse of waste resources utilization.

The Influence of Fly Ash and Aggregates Composition on Pervious Concrete Characteristics

2018 ◽  
Vol 917 ◽  
pp. 297-302
Author(s):  
Jul Endawati ◽  
R. Utami ◽  
Rochaeti
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Research Result ◽  
Strength Test ◽  
Pervious Concrete ◽  
Fine Aggregate ◽  
Fine Aggregates ◽  
Compressive Strength Test ◽  
Binder Composition ◽  
Permeability Rate

Fly ash as a pozzolanic waste material can be utilized to substitute part of Portland cement in concrete mixture. The concrete paving industry utilizes the fly ash up to 50% (by weight) of the total binder. This study aims to obtain the characteristics of fly ash applications for pervious concrete. The composition of the binder developed based on the optimal proportion of fly ash from the previous study and the maximum of fly ash percentage used by the local paving industry in general. Other mix variations were made of the same binder composition with the addition of 6% of fine aggregates. The compressive strength of pervious concrete which binder composed of 63% portland cemet composite-25% fly ash-12% silica fume gained at 28 days, was not much different from the compressive strength of the pervious concrete without fine aggregate and with the binder composition of 50% FA-50% PCC and 0% SF. The value of the compressive strength test of the pervious concrete without fine aggregate is still within the range of compressive strength values ​​according to the ACI 522 R-10. The permeability rate of the pervious concrete is in the range of permeability research result of Chopra, 2013 (0.97 ÷ 1.90 cm/sec), but still higher compared to permeability rate gained by Dewoolkar, 2009 (0.83 ÷ 0.98 cm/sec).

scholarly journals SOLIDIFIKASI DEINKING SLUDGE DAN FLY ASH BATU BARA UNTUK PEMENUHAN PERSYARATAN PENIMBUNAN DI LANDFILL

2016 ◽  
Vol 1 (02) ◽  
Author(s):  
Krisna Adhitya Wardhana ◽  
Sri Purwati ◽  
Saepulloh , ◽  
Toni Rachmanto
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Portland Cement ◽  
Alternative Treatment ◽  
Coal Fly Ash ◽  
Hazardous Materials ◽  
Strength Test ◽  
Hazardous Wastes ◽  
Compressive Strength Test ◽  
Filter Test

Deinking sludge and coal fly ash are classified as hazardous wastes that have to be treated before disposed in landfill. Solidification is an alternative treatment to prevent hazardous materials release to the environment. The research was conducted to find solidification combination formula of deinking sludge and coal fly ash that pass compressive strength test (>10ton/m2) and paint filter test so it can be disposed to landfill. The concretes were made from cement and aggregate (50% deinking sludge and 50% fly ash) on range combination 1:11 - 1:20. In addition, based on pozzolanic characteristic of fly ash, concretes without cement was made. The results showed that solidification products with combination 1:11 - 1:20 have compressive strength that exceed the regulation and passed paint filter test. Combination of 50% deinking sludge and 50% coal fly ash without portland cement addition had compressive strength that met requirement for landfill disposal.Key words : deinking sludge, fly ash, solidification, landfill ABSTRAKDeinking sludge dan fly ash batubara termasuk kedalam kategori limbah B-3 yang harus diolah terlebih dahulu sebelum ditimbun di landfill. Proses solidifikasi adalah salah satu pengolahan untuk mencegah tersebarnya kandungan limbah B-3 ke lingkungan. Tujuan dari penelitian ini adalah menentukan formulasi solidifikasi kombinasi deinking sludge dengan fly ash batubara yang memenuhi persyaratan kuat tekan (> 10 ton/m2) dan uji paint filter sehingga dapat ditimbun di landfill. Penelitian ini dilakukan dengan variasi perbandingan semen terhadap agregat (50% fly ash dan 50% deinking sludge) mulai dari 1:11 sampai dengan 1:20 dan juga dilakukan perlakuan agregat tanpa semen. Hasil penelitian menunjukkan bahwa komposisi 1:11 s/d 1:20 memiliki nilai kuat tekan yang jauh melebihi persyaratan dan lolos uji paint filter. Sedangkan hasil dari perlakuan tanpa semen menunjukkan bahwa kombinasi 50% deinking sludge dan 50% fly ash batubara telah memiliki nilai kuat tekan yang cukup besar dan memenuhi persyaratan penimbunan di landfill.Kata kunci : deinking sludge, fly ash batubara, solidifikasi, landfill 

scholarly journals ANALISIS KUAT TEKAN DAN DENSITAS BETON NON-PASIR DENGAN CAMPURAN VARIAN ABU TERBANG MENGGUNAKAN MATLAB

2020 ◽  
Vol 14 (1) ◽  
pp. 18
Author(s):  
Nahari Rasif ◽  
Indri Silvia Dewi ◽  
Nisya Aviani ◽  
Widya Utama
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Strength Test ◽  
Compressive Strength Test ◽  
Average Compressive Strength ◽  
Test Objects

This study aims to determine how the properties of non-sand concrete with variations in the amount of mixing fly ash. This property was analyzed by compressive strength test. We also do calculations using the MATLAB application with interactive script methods. There are 16 numbers of test objects conducted in this study. The specimen is cylindrical with a size of 7.5 cm and a height of 15 cm. Flying ash variations used ranged from 0%, 25%, 50%, and 75%. In this research, we use 1: 6 between cement and gravel. The results of the average compressive strength obtained in the mixture of 0% fly ash are 1,172 MPa, 25% 0.871 MPa, 50% 2,367 MPa and 1,465 MPa for mixture of 75% fly ash. The best compressive strength results on the 50% fly ash mixture. The density is also affected by the mixing of this fly ash. The greater the mixing of the fly ash, the smaller the density value. Keywords: compressive strength, density, fly ash, MATLAB

scholarly journals Menentukan Kualitas Hasil Perbaikan Beton Bangunan Dermaga Dengan Metode Inspeksi Teknik

2017 ◽  
Vol 6 (1) ◽  
pp. 23-29
Author(s):  
Sulardi Sulardi
Keyword(s):  
Compressive Strength ◽  
Research Method ◽  
Design Method ◽  
Concrete Surface ◽  
Strength Test ◽  
Concrete Repair ◽  
Concrete Core ◽  
Surface Protection ◽  
Compressive Strength Test

The research objective was to provide an overview of the engineering inspection methods used in determine the quality of repair results and the quality of the results of concrete repair based on the results of concrete repair what has been done. The research method is carried out by engineering inspection methods which include visual tests and rebar test of concrete surface, compressive strength test with hammer test, test for concrete homogeneity with UPV test, test profometer concrete thickness blanket, cast drilled concrete core sampling, tensile test and concrete connection carbonation test of concrete surfaces with phenopthalein solution. The results of the research are chipping and grouting with specifications of microconcrete flowable material and repaired concrete surface protection with a thick mastic shield coating material specifications min. 300 micron DFT has been proven improve the strong quality of existing concrete by 69.40% from the compressive strength of the installed concrete design. Method Technical inspection, repair methods and specifications of the material used can be replicated for repairs damage and to determine the quality of similar repairs elsewhere.

Sign in / Sign up

Export Citation Format

Share Document