Research on Cylindrical Precision Machining Adopting ELID Grinding Technology

2014 ◽  
Vol 1027 ◽  
pp. 97-100 ◽  
Author(s):  
Jia Liang Guan ◽  
Xiao Hui Zhang ◽  
Ling Chen ◽  
Xin Qiang Ma
Keyword(s):  
Wheel Speed ◽  
Process Equipment ◽  
Precision Machining ◽  
Precision Grinding ◽  
Machined Surface ◽  
Elid Grinding ◽  
Optimization Of Process Parameters ◽  
Ultra Precision ◽  
Efficient Processing ◽  
Mirror Grinding

In order to explore the new way to precision machining of the cylindrical, ELID precision mirror grinding technology are employed to precision ultra-precision grinding experiments. Given ELID precision mirror grinding technology has effectively solved the basis of many of the typical flat-precision machining difficult materials and efficient processing, through the conversion process equipment tools, and optimization of process parameters, obtained when the wheel speed in 16 ~ 20 m / s, when the grinding depth 10μm, cylindrical grinding state is best, which could obtain Ra0.025μm surface roughness of the machined surface.

Research on Precision Mirror Machining Technology for W-Mo Alloy

2011 ◽  
Vol 487 ◽  
pp. 303-307
Author(s):  
Jia Liang Guan ◽  
H.W. Lu ◽  
X.H. Xiao ◽  
Y.C. Wu ◽  
Z.D. Chen
Keyword(s):  
Surface Quality ◽  
Formation Mechanism ◽  
Rotational Speed ◽  
Precision Machining ◽  
Work Piece ◽  
Mirror Surface ◽  
Precision Grinding ◽  
Elid Grinding ◽  
Ultra Precision

A new way of precision machining was studied through the experiments of Electrolytic In-Process Dressing (ELID) precision grinding and ultra precision lapping and polishing for W-Mo metal alloy. First a 22nm(Ra) surface was obtained through the ELID grinding, last a 11nm(Ra) surface was obtained after the process of lapping and polishing with 0.1～0.3 N/cm2pressure, 60～100 r/min rotational speed and other optimized parameters. Meanwhile, the formation mechanism of ultra precision mirror surface of the alloy was also analyzed. The experiments prove surface quality of the work piece was guaranteed by ELID grinding, and which was also greatly affected by some parameters in lapping and polishing such as pressure, rotational speed.

Research on ELID Ultra-Precision Grinding Performance of SiCp/Al Composites

2014 ◽  
Vol 614 ◽  
pp. 75-78
Author(s):  
Jia Liang Guan ◽  
Lei Zhu ◽  
Ling Chen ◽  
Xin Qiang Ma ◽  
Xiao Hui Zhang
Keyword(s):  
Surface Roughness ◽  
Cast Iron ◽  
Rotation Speed ◽  
Grinding Wheel ◽  
Feed Speed ◽  
Precision Grinding ◽  
Machined Surface ◽  
Elid Grinding ◽  
Machined Surface Roughness ◽  
Ultra Precision

The electrolytic in-process dressing (ELID) grinding technology was adopted for ultra-precision grinding experiments of SiCp/Al composites; the machined surface roughness can obtain Ra0.030μm. The experiments show that: with the grinding wheel rotation speed of 1500r/min, the grinding depth of 0.1μm, and feed speed of 2m/min and using W5 cast iron bonded diamond grinding wheel, the grinding effect can achieve optimal.

Research on ELID Grinding Performance of GCr15 Steel

2013 ◽  
Vol 797 ◽  
pp. 740-745
Author(s):  
Jia Liang Guan ◽  
Xin Qiang Ma ◽  
Xiao Hui Zhang ◽  
Li Li Zhu ◽  
Zhi Wei Wang
Keyword(s):  
Surface Roughness ◽  
Bearing Steel ◽  
Precision Grinding ◽  
Machined Surface ◽  
Elid Grinding ◽  
Peripheral Velocity ◽  
Gcr15 Bearing Steel ◽  
Machined Surface Roughness ◽  
Ultra Precision ◽  
Main Factors

The electrolytic in-process dressing (ELID) grinding technology was adopted for ultra-precision grinding experiments of GCr15 bearing steel. The experiments show that: grinding depth, electrolysis gap and wheel peripheral velocity are the main factors to affect the surface quality. With the electrolysis gap of 0.5mm, the grinding depth of 0.1μm, and the wheel peripheral velocity of 18m/s, the grinding effect can achieve optimal and the machined surface roughness can obtain Ra0.006μm.

Machined Surface Characteristics and Removal Mechanism of Soft and Brittle Solids

2010 ◽  
Vol 447-448 ◽  
pp. 183-187 ◽  
Author(s):  
Zhen Yu Zhang ◽  
Rudy Irwan ◽  
Han Huang
Keyword(s):  
Surface Characteristics ◽  
Abrasive Machining ◽  
Precision Grinding ◽  
Machined Surface ◽  
Brittle Solids ◽  
The Coefficient Of Friction ◽  
Ultra Precision ◽  
Ductile Removal ◽  
Fracture Features ◽  
Free Abrasive

Surface characteristics of CZT wafers machined using wire sawing, free abrasives lapping and polishing and ultra-precision grinding were investigated. Wire sawing resulted in the removal of material in both ductile and brittle regimes, but both polishing and grinding led to a ductile removal. The grinding produced very smooth surfaces free of embeddings and scratches, which is thus considered to have better machinability than the free abrasive machining. The nanoindentation and nanoscratch on MCT wafers at nanometric scales resulted in considerable plastic deformation, but no fracture features. The hardness of the MCT wafer was 500 to 550 MPa, and the coefficient of friction was particularly high, ranging from 0.45 to 0.55.

Characterization of Cutting-Induced Heat Generation in Ultra-Precision Milling of Aluminium Alloy 6061

2013 ◽  
Vol 552 ◽  
pp. 201-206
Author(s):  
Su Juan Wang ◽  
Suet To ◽  
Xin Du Chen
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Heat Generation ◽  
Feed Rate ◽  
Dimensional Accuracy ◽  
Precision Machining ◽  
Machined Surface ◽  
Single Crystal Diamond ◽  
Ultra Precision ◽  
Alloy 6061

The technology of ultra-precision machining with single crystal diamond tool produces advanced components with higher dimensional accuracy and better surface quality. The cutting-induced heat results in high temperature and stress at the chip-tool and tool-workpiece interfaces therefore affects the materials and the cutting tool as well as the surface quality. In the ultra-precision machining of al6061, the cutting-induced heat generates precipitates on the machined surface and those precipitates induce imperfections on the machined surface. This paper uses the time-temperature-precipitation characteristics of aluminum alloy 6061 (al6061) to investigate the effect of feed rate on the cutting-induced heat generation in ultra-precision multi-axis milling process. The effect of feed rate and feed direction on the generation of precipitates and surface roughness in ultra-precision raster milling (UPRM) is studied. Experimental results show that heat generation in horizontal cutting is less than that in vertical cutting and a larger feed rate generates more heat on the machined workpiece. A smaller feed rate produces a better surface finish and under a larger feed rate, scratch marks are produced by the generated precipitates and increase surface roughness.

A Study of a New ELID Grinding Fluid by BP Neural Network Model

2011 ◽  
Vol 58-60 ◽  
pp. 1792-1796
Author(s):  
Wei Li ◽  
Yu Jie Fan
Keyword(s):  
Neural Network ◽  
Bp Neural Network ◽  
Grinding Wheel ◽  
Precision Grinding ◽  
Elid Grinding ◽  
Environmental Friendly ◽  
Grinding Fluid ◽  
Hard And Brittle Materials ◽  
Ultra Precision ◽  
Bp Neural Network Model

Electronic in-process dressing (ELID) grinding will be a main technology of ultra-precision grinding which has been widely adopted to the ultra-precision and high effectively machining of hard and brittle materials. This study puts forward a new environmental friendly bamboo charcoal bonded (BCB) grinding wheel and develops a new ELID grinding fluid. An oxide layer is mostly determined by the electric performance of grinding fluid in the experiment. This paper founds a model to forecast grinding fluid’s electric performance by BP neural network and MATLAB. This method can be used in developing of ELID grinding machining fluid to improve the ELID grinding effect.

Experiment Study on ELID Grinding of TN85 Cermets

2011 ◽  
Vol 175 ◽  
pp. 131-135
Author(s):  
Fu Qiang Tong ◽  
Fei Hu Zhang ◽  
Dian Rong Luan
Keyword(s):  
Metal Matrix ◽  
High Hardness ◽  
Diamond Powder ◽  
Diamond Wheel ◽  
Precision Machining ◽  
Grinding Wheel ◽  
Powder Particle Size ◽  
Matrix Composites ◽  
Elid Grinding ◽  
Ultra Precision

TN85 cermets is one kind of particle reinforced metal matrix composites, which is high hardness, good wear resistance, and bring great difficulties in processing, so it is necessary to study the processing performance. During the test on ELID grinding TN85 cermets, it is found that plastic removal is the main ways during grinding TN85 cermets materials. The powder particle size of W2.5 diamond wheel is successfully used in full removal of TN85 cermets plastic, the surface roughness value of rms: 16.81nm and Ra: 12.52nm. The results showed that: ELID grinding wheel with diamond powder technology can be used in ultra-precision machining TN85 cermets.

The Research of ELID Grinding Effect and Surface Quality on Carbonized Cold-Rolled Steel

2012 ◽  
Vol 229-231 ◽  
pp. 542-546
Author(s):  
J.L. Guan ◽  
Li Li Zhu ◽  
H.W. Lu ◽  
Zhi Wei Wang
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Grinding Wheel ◽  
Rolled Steel ◽  
Precision Grinding ◽  
Cold Rolled Steel ◽  
Elid Grinding ◽  
Peripheral Velocity ◽  
Ultra Precision ◽  
Cold Rolled

In this document, the electrolytic in-process dressing ( ELID ) grinding technique is used for ultra-precision processing experimental research on the carbonized cold-rolled steel (HRC60～80).A surface roughness of Ra6～8nm was obtained after ELID precision grinding. The results proved that adopting micro grain size (W1.5～W36) and high hardness cast iron based diamond grinding wheel, increasing the wheel peripheral velocity (18～20m/s) and reducing grinding depth can effectively improve surface quality and bring the surface roughness down. The wheel peripheral velocity, grinding depth as well as grinding fluid are the main factors during ultra-precision grinding.

Study on the Machining Principle and Experiment of Grinding

2013 ◽  
Vol 395-396 ◽  
pp. 1000-1003
Author(s):  
Qiang Xiao
Keyword(s):  
New Technology ◽  
Surface Damage ◽  
Grinding Wheel ◽  
Process Technology ◽  
Precision Grinding ◽  
Brittle To Ductile Transition ◽  
Elid Grinding ◽  
Ductile Mode ◽  
Grinding Mechanism ◽  
Ultra Precision

ELID for SiC which enables the improvement of surface quality is put forward. ELID grinding technology is new technology of ultra-precision grinding, and the oxide film is formed on grinding wheel by electrolytic in-process technology, thus the wheel is in-process dressed. SiC material removal mechanism and ELID grinding mechanism is analyzed, the character and condition of brittle to ductile transition of SiC and surface formation mechanism of ductile mode grinding of SiC are studied, the results show that ELID grinding can realize ductile grinding ,this will lower the surface damage and improve the machining efficiency.

Sign in / Sign up

Export Citation Format

Share Document