Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash (RHA) in Cement Paste and Concrete

2015 ◽  
Vol 1119 ◽  
pp. 662-671
Author(s):  
Egbe Ngu Ntui Ogork ◽  
Okorie Austine Uche ◽  
Augustine Uche Elinwa
Keyword(s):  
Cement Paste ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Linear Shrinkage ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Setting Times ◽  
Controlled Burning ◽  
Standard Procedures ◽  
Cementing Material

This paper investigates the effect of Groundnut Husk Ash (GHA) blended with Rice Husk Ash (RHA) in cement paste and concrete with a view to improve its suitability as a supplementary cementing material. The GHA and RHA used were obtained by controlled burning of groundnut husk and rice husk, respectively in a kiln to a temperature of 600 °C, and after allowing cooling, sieved through sieve 75 μm and characterized. The effects of GHA admixed with 10 % RHA on cement paste and concrete were investigated at replacement levels of 0, 10, 20, 30 and 40 %, respectively by weight of cement. Fresh concrete grade 20 of mixes made with partial replacement with GHA admixed with 10 % RHA in the order as above were tested for workability and hardened concrete tested for compressive, splitting tensile and flexural strengths at curing ages of 3, 7, 28, 60 and 90 days in accordance with standard procedures. The result of the investigations showed that GHA was of low reactivity and RHA was more reactive, with combined SiO2, Al2O3 and Fe2O3 content of 26.06 % and 80.33 %, respectively. The use of GHA admixed with 10 % RHA increased consistency, initial and final setting times of cement, but decreased linear shrinkage. The workability, compressive strength, splitting tensile strength and flexural strength of concrete decreased with increase in GHA-RHA content. However, 15 % would be considered as the optimum for structural concrete.

Rice Husk Ash as Fine Aggregate Sustainable Material for Strength Enhancement of Conventional and Self Compacting Concrete

2016 ◽  
Vol 692 ◽  
pp. 94-103
Author(s):  
S.S. Samantaray ◽  
K.C. Panda ◽  
M. Mishra
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Fresh Concrete ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Fine Aggregate ◽  
Self Compacting Concrete ◽  
Strength Enhancement ◽  
Slump Flow ◽  
Concrete Property

Rice husk ash (RHA) is a by-product of the rice milling industry. Near about 20 million tonnes of RHA is produced annually which creates environmental pollution. Utilization of RHA as a supplementary cementitious material adds sustainability to concrete by reducing CO2 emission of cement production. But, the percentage of utilization of RHA is very less. This paper presents the results of an experimental investigation to study the effects of partial replacement of fine aggregate with RHA on mechanical properties of conventional and self-compacting concrete (SCC). The fine aggregate is replaced by RHA in conventional concrete (CC) with six different percentage by weight such as 0%, 10%, 20%, 30%, 40% and 50% having w/c ratio 0.375 with variation of super plasticiser dose, whereas in SCC the replacement of fine aggregate by RHA is 0%, 10%, 20%, 30%, 40%. The design mix for CC is targeted for M30 grade concrete. The fresh concrete test of SCC is conducted by using slump flow, T500, J-ring, L-box, U-box and V-funnel to know the filling ability, flow ability and passing ability of SCC. As fresh concrete property concerned, the result indicates that the slump flow value satisfied the EFNARC 2005 guidelines upto 30% replacement of fine aggregate with RHA whereas 40% replacement did not satisfy the guideline. As hardened concrete property concerned, the compressive strength, split-tensile strength and flexural strength of CC and SCC are determined at 7, 28 and 90 days. The test result indicates that upto 30% replacement of fine aggregate with RHA enhances the strength in CC whereas the strength enhancement in SCC upto 20% replacement.

scholarly journals PROPERTIES OF CEMENT PASTE AND CONCRETE CONTAINING CALCIUM CARBIDE WASTE AS ADDITIVE

2016 ◽  
Vol 36 (1) ◽  
pp. 26-31
Author(s):  
EN Ogork ◽  
TS Ibrahim
Keyword(s):  
Compressive Strength ◽  
Cement Paste ◽  
Setting Time ◽  
Drying Shrinkage ◽  
Calcium Carbide ◽  
Linear Shrinkage ◽  
Hardened Concrete ◽  
Concrete Compressive Strength ◽  
Initial Setting Time ◽  
Standard Procedures

This paper assessed the effect of calcium carbide waste (CCW) as additive on the properties of cement paste and concrete. The CCW used was sourced from a local panel beating workshop. It was sundried and sieved through a 75 µm sieve and characterized by X-Ray Fluorescence (XRF) analytical method. The consistency, setting times and drying linear shrinkage of cement paste with CCW addition of 0, 0.25, 0.5, 0.75 and 1.0 %, respectively by weight of cement were investigated in accordance with standard procedures. The slump values of fresh concrete containing CCW as additive and of 1:2:4 mix ratio and water-cement ratio of 0.5 was determined. A total of sixty numbers of 150 mm cubes of hardened concrete were tested for compressive strength at 1, 3, 7, 28 and 56 days of curing in accordance with standard procedures. The concrete compressive strength was also modeled using Minitab statistical software based on linear regression technique. The results of the investigations showed that CCW was predominantly of calcium oxide (95.69 %) and a combined SiO2, Al2O3 and Fe2O3 content of 3.14 %. The addition of CCW in cement decreased drying shrinkage (100 %), initial setting time (78 %) and final setting time (57 %), but increased consistency (14 %) at 1.0 % CCW content. The addition of CCW in concrete also showed slight increase in slump (6.5 %) and increase in compressive strength with increase in CCW additive up to 0.5 % and decrease in compressive strength with further increase in CCW content. The 28 days compressive strength of concrete with 0.5 % CCW content was 6.4 % more than normal, while that of concrete with 1.0 % CCW content was 14.9 % less than normal. The compressive strength model of CCW-concrete was developed with R2 value of 0.830 and could be used to predict concrete compressive strength. http://dx.doi.org/10.4314/njt.v36i1.4

Assessment of Rice Husk Ash (RHA) and Calcium Chloride (CaCl2) on Compressive Strength of Concrete Grade 20

2018 ◽  
Vol 40 ◽  
pp. 22-29
Author(s):  
Joseph A. Ige ◽  
Mukaila A. Anifowose ◽  
Samson O. Odeyemi ◽  
Suleiman A. Adebara ◽  
Mufutau O. Oyeleke
Keyword(s):  
Compressive Strength ◽  
Calcium Chloride ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Conventional Concrete ◽  
Compressive Strength Test ◽  
Compressive Strength Of Concrete ◽  
Strength Result

This research assessed the effect of Nigerian rice husk ash (RHA) and calcium chloride (CaCl2) as partial replacement of cement in concrete grade 20. Rice husk ash (RHA) is obtained by combustion of rice husk in a controlled temperature. The replacement of OPC with rice husk ash (RHA) were 0%, 5%, 10%, 15% and 20%. 1% of Calcium Chloride was blended with OPC/RHA in all the test specimens except from control mix. Concrete cubes of sizes 150mm x 150mm x 150mm were cast and cured in water for 7, 14 and 28 days respectively. Slump test was conducted on fresh concrete while density test and compressive strength test were conducted on hardened concrete. The slump results revealed that the concrete becomes less workable (stiff) as percentage increases. The compressive strength result at 28 days revealed that 5%RHA/1%CaCl2 have the highest strength of 26.82N/mm2 while 20%RHA/1%CaCl2 have the lowest strength (21.48N/mm2). Integration of 5%RHA/1%CaCl2 and 10%RHA/1%CaCl2 as cement replacement will produce a concrete of higher compressive strength compared to conventional concrete in grade 20 concrete.

scholarly journals Characterization and use of swine deep bedding ashes in cementitious composites

2012 ◽  
Vol 32 (5) ◽  
pp. 810-821 ◽  
Author(s):  
Débora C. G. de Oliveira ◽  
Michelle S. Rodrigues ◽  
Sérgio F. dos Santos ◽  
Holmer Savastano Junior
Keyword(s):  
Portland Cement ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Partial Replacement ◽  
Loss On Ignition ◽  
X Ray Diffraction ◽  
Specific Density ◽  
X Ray ◽  
Controlled Burning ◽  
Rural Construction

The deep bedding is a swine alternative production, especially in the finishing phase, whose byproduct can be recycled, reducing the environmental impact. The objectives of this study were to characterize the ash coming from the controlled burning of the swine deep bedding (SDBA) based on rice husk, and to evaluate their performance in composites as a partial substitute for Portland cement (PC). To measure the differences between SDBA and rice husk ash (RHA) as a reference, we have characterized: particle size distribution, real specific density, x-ray diffraction, electrical conductivity, scanning electron microscopy, chemical analysis and loss on ignition. Samples were prepared for two experimental series: control, and another one with the partial replacement of 30% of SDBA in relation to the mass of the Portland cement. According to the results obtained for physical and mechanical characterization, the composites with SDBA can be used as a constructive element in the rural construction.

Effect of Microwave Incinerated Rice Husk Ash (MIRHA) on Workability and Compressive Strength of Concrete

2014 ◽  
Vol 935 ◽  
pp. 193-196 ◽  
Author(s):  
Asma Abd Elhsameed ◽  
Nasir Shafiq ◽  
Muhd Fadhil Nuruddin
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Negative Effects ◽  
Concrete Production ◽  
Hardened Properties ◽  
Compressive Strength Of Concrete ◽  
By Products

Agricultural and industrial by-products are commonly used in concrete production as cement replacement materials (CRMs) or as admixtures to enhance both fresh and hardened properties of concrete as well as to save the environment from the negative effects caused by their disposal. This paper presents some findings on the effect of Microwave Incinerated Rice Husk Ash (MIRHA) on workability and compressive strength of concrete. It was obtained that the inclusion of MIRHA as partial replacement of cement could significantly improve the compressive strength of hardened concrete while reducing the workability of fresh concrete.

Determination of Creep Behavior of Concrete Beams Made with Rice Husk Ash

2021 ◽  
Vol 15 (1) ◽  
pp. 339-346
Author(s):  
Winfred Mutungi ◽  
Raphael N. Mutuku ◽  
Timothy Nyomboi
Keyword(s):  
Prediction Model ◽  
Rice Husk ◽  
Creep Behavior ◽  
Rice Husk Ash ◽  
Concrete Beams ◽  
Plain Concrete ◽  
Reinforced Concrete Beams ◽  
Partial Replacement ◽  
Design Strength ◽  
Concrete Production

Background: Creep in concrete is a long-term deformation under sustained loading. It is influenced by many factors, including constituent materials, environmental conditions, among others. Whenever there is an alteration in the convectional concrete preparation process, the creep characteristics need to be realistically assessed. In the present construction, rice husk ash has been used for partial replacement of cement in concrete production. This is because its properties of both tensile and compressive strength in concrete have been tested and found comparable with plain concrete. However, durability characteristics such as creep, which take place in the long run, have not been realistically assessed. Therefore, it is important to study the creep of rice husk ash concrete, which will further help in the development of a creep prediction model for such concrete for use by design engineers. Objectives: Rice husk ash was used as supplementary cementitious material in concrete, and the creep behavior was studied with the aim of producing a creep prediction model for this concrete. Methods: The cement was replaced with 10% of rice husk ash in concrete with a design strength of 30MPA. Reinforced concrete beams were cast and loaded for flexural creep 35 days after casting. The loading level was 25% of the beam’s strength at the time of loading. The creep observation was done for 60 days. The rice husk used was obtained locally from Mwea irrigation scheme in Kenya. The experiments were carried out in our school laboratory at Jomo Kenyatta university of Agriculture and Technology. Results: The creep strain data of rice husk ash concrete beams was obtained with the highest value of 620 micro strain for 60 days. The results were used to develop a creep prediction model for this concrete. Conclusion: A creep prediction model for rice husk ash concrete has been developed, which can be adopted by engineers for class 30 of concrete containing rice husk ash at a 10% replacement level.

Experimental Study on Various Mineral Admixtures in Fibre Reinforced Concrete

2019 ◽  
pp. 309-317
Author(s):  
Kavitha E ◽  
Karthik S ◽  
Eithya B ◽  
Seenirajan M
Keyword(s):  
Fly Ash ◽  
Rice Husk ◽  
Power Plants ◽  
Rice Husk Ash ◽  
Thermal Power ◽  
Experimental Studies ◽  
Mineral Admixtures ◽  
Hardened Concrete ◽  
Polypropylene Fibres ◽  
Concrete Production

The quantity of fly ash produced from thermal power plants in India is approximately 80 million tons each year, and its percentage utilization is less than 10%. An attempt has been made to utilize these cheaper materials in concrete production. This thesis aims at investigating the characteristics of fresh concrete and various strengths of hardened concrete made with various mineral admixtures such as fly ash. GGBFS, silica fume. Rice husk ash along with polypropylene fibres in various proportions.  M20 grade concrete is considered for experimental studies with 53grade Ordinary Portland Cement blended with varying percentages of mineral admixtures. The maximum size of coarse aggregate used is 20mm.  Various mineral admixtures such as fly ash. GGBFS.Silica fume. Rice Husk Ash were added concrete in various percentages by partially replacing cement and the optimum percentage of the mineral admixtures will be found.  Based on the obtained values, the admixture with maximum mechanical strength is determined and to this polypropylene fibre is added by varying 0 to 0.5 % by weight of cement to the mix.  The test results obtained were compared and discussed with conventional concrete.

scholarly journals Mix Design of Grade M35 by Replacement of Cement with Rice Husk Ash in Concrete

2018 ◽  
Vol 8 (03) ◽  
Author(s):  
Savita Chaudhary ◽  
Aditya Pratap Singh
Keyword(s):  
Rice Husk ◽  
Carbon Dioxide Emissions ◽  
Rice Husk Ash ◽  
Strength Properties ◽  
Environmental Benefits ◽  
Partial Replacement ◽  
Pozzolanic Material ◽  
Concrete Production ◽  
Cement And Concrete ◽  
Strength And Durability

The optimized RHA, by controlled burn or grinding, has been used as a pozzolanic material in cement and concrete. Using it provides several advantages, such as improved strength and durability properties, and environmental benefits related to the disposal of waste materials and to reduced carbon dioxide emissions. Up to now, little research has been done to investigate the use of RHA as supplementary material in cement and concrete production .The main objective of this work is to study the suitability of the rice husk ash as a pozzolanic material for cement replacement in concrete. However it is expected that the use of rice husk ash in concrete improve the strength properties of concrete. Also it is an attempt made to develop the concrete using rice husk ash as a source material for partial replacement of cement, which satisfies the

Sign in / Sign up

Export Citation Format

Share Document