Analysis of OSB Mat Structure Using CAD Technology

2010 ◽  
Vol 113-116 ◽  
pp. 1619-1623
Author(s):  
Peng Li ◽  
Yu Bo Tao ◽  
Feng Hu Wang ◽  
Sun Guo Wang
Keyword(s):  
Computer Aided Design ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Three Dimensional Model ◽  
Forming Process ◽  
Strand Orientation ◽  
Realistic Description ◽  
Relationship Of ◽  
The Impact ◽  
The Relationship

For further researching the structural characteristics of Orientated strand board (OSB) mat, a three-dimensional model was developed using computer-aided design (CAD) technology to simulate behaviors of individual strands in the mat-forming process. This model provided a more realistic description of the mat structure than the previous simulations in using varied strand geometry and different types of strand orientation, defining strand location, and solving the problem of edge effect. This model can be used to analyze the impact of strand orientation on the number of strand overlaps, and to identify the relationship of strand orientation and the horizontal voids distribution in the mat. Information provided by this model is the basis of further studying the effect of the mat formation on panel void characteristics, and the relationship of the voids volume to panel properties.

A three-dimensional gravity model of the southern contact of the Sebago pluton, Maine

1998 ◽  
Vol 35 (6) ◽  
pp. 649-656 ◽  
Author(s):  
Mark D Behn ◽  
J Dykstra Eusden, Jr. ◽  
John A Notte III
Keyword(s):  
Three Dimensional ◽  
Average Thickness ◽  
Uniform Thickness ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Metasedimentary Rocks ◽  
The North ◽  
Dimensional Gravity ◽  
Relationship Of ◽  
The Relationship

The Sebago pluton is a two-mica granite that intruded the metasedimentary rocks of the Central Maine Terrane around 292 Ma. In recent years, geologists have raised an increasing number of questions related to the overall thickness of the Sebago pluton and the position of its subsurface contact with the underlying metasedimentary rocks. Past studies have shown the Sebago pluton to be a thin, 1-2 km thick, subhorizontal sheet dipping 3° to the northeast. This study examines anomalies in the Earth's gravitational field related to the southern portion of the Sebago pluton, specifically to determine the thickness of the pluton and to locate the subsurface contact between the pluton and the underlying metasedimentary rocks. A three-dimensional model shows the thickest portions of the pluton (~1.8 km) to occur at the bottom of a bowl hape along the southwestern contact. Moreover, the model shows the pluton to thin toward the northern and eastern regions of the study area, where the average thickness is less than 0.5 km. The pluton appears to extend southward below the cover of the metasedimentary rocks along the southwestern contact. Thus, contrary to previous models, the Sebago pluton is not a northeasterly dipping sheet of uniform thickness, but rather an arched sheet with an irregular thickness extending beneath the metasedimentary rocks along both its northern and southern contacts. Based on this new geometry, either the relationship of the pluton to the surrounding metamorphic zones must be modified, or the possibility must be considered that the Sebago pluton is actually a composite batholith, composed of a younger (Permian) granite to the north and an older (Carboniferous) granite to the south.

Insights into the relationship between the haem-binding pocket and the redox potential ofc6cytochromes: four atomic resolution structures ofc6andc6-like proteins fromSynechococcussp. PCC 7002

2014 ◽  
Vol 70 (11) ◽  
pp. 2823-2832 ◽  
Author(s):  
Wojciech Bialek ◽  
Szymon Krzywda ◽  
Pawel Zatwarnicki ◽  
Mariusz Jaskolski ◽  
Piotr Kolesinski ◽  
...  
Keyword(s):  
Redox Potential ◽  
Dipole Moments ◽  
Three Dimensional ◽  
Binding Pocket ◽  
High Similarity ◽  
Surface Charge Distribution ◽  
Function Relationship ◽  
Relationship Of ◽  
The Impact ◽  
The Relationship

The structure of cytochromec6Cfrom the mesophilic cyanobacteriumSynechococcussp. PCC 7002 has been determined at 1.03 Å resolution. This is the first structural report on the recently discovered cyanobacterial cytochromec6-like proteins found in marine and nitrogen-fixing cyanobacteria. Despite high similarity in the overall three-dimensional fold between cytochromesc6andc6C, the latter shows saliently different electrostatic properties in terms of surface charge distribution and dipole moments. Its midpoint redox potential is less than half of the value for typicalc6cytochromes and results mainly from the substitution of one residue in the haem pocket. Here, high-resolution crystal structures of mutants of both cytochromesc6andc6Care presented, and the impact of the mutation of specific residues in the haem-binding pocket on the redox potential is discussed. These findings contribute to the elucidation of the structure–function relationship ofc6-like cytochromes.

Numerical Simulation on Drawing Deep of Cylindrical Pieces Based on Dynaform

2014 ◽  
Vol 684 ◽  
pp. 252-258 ◽  
Author(s):  
Jun Hong Wang ◽  
Xu Dong Bao ◽  
Hai Mei Feng ◽  
Chang Du
Keyword(s):  
Numerical Simulation ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Forming Process ◽  
Minimum Thickness ◽  
Optimum Parameters ◽  
Design And Manufacture ◽  
The Impact

Abstract: The design and manufacture of mold often rely on the experience of the designers, which led to the fact that the mold needs to be repeatedly debugged and corrected. Numerical simulation technology enables the simulation of the forming process of sheet metal and prediction of defects in design, thus to improve labor efficiency, save time and reduce costs. In this paper, the software Dynaform is used as a platform and a three-dimensional model is built to numerical simulate and analyze the drawing deep of a typical thin-walled cylindrical piece.Orthogonal experimentis adopted to analyze the impact of BHF, punching speed and punch-die gap on forming quality of the drawing pieces. With minimum thickness and wrinkling as indicators, the impact of various factors is analyzed and a set of optimum parameters is found out that is, BHF is 20kN, punching speed is 2000mm / s and punch-die gap is 0.9mm.

Business: Making Cents of Coding Systems: Billing for Professional Services

2010 ◽  
Vol 20 (1) ◽  
pp. 3-8
Author(s):  
Dee Adams Nikjeh
Keyword(s):  
Professional Services ◽  
Speech Language Pathology ◽  
Coding Systems ◽  
Language Pathology ◽  
Program Funding ◽  
Fee Schedule ◽  
Procedure Codes ◽  
Relationship Of ◽  
The Impact ◽  
The Relationship

Abstract Administrators and supervisors face daily challenges over issues such as program funding, service fees, correct coding procedures, and the ever-changing healthcare regulations. Receiving equitable reimbursement for speech-language pathology and audiology services necessitates an understanding of federal coding and reimbursement systems. This tutorial provides information pertaining to two major healthcare coding systems and explains the relationship of these systems to clinical documentation, the Medicare Physician Fee Schedule and equitable reimbursement. An explanation of coding edits and coding modifiers is provided for use in those occasional atypical situations when the standard use of procedural coding may not be appropriate. Also included in this tutorial is a brief discussion of the impact that the Medicare Improvements for Patients and Providers Act of 2008 (HR 6331 Medicare Improvements for Patients and Providers Act [MIPPA], 2008) has had on the valuation of speech-language pathology procedure codes.

scholarly journals The Relationship of CSR Communication on Social Media with Consumer Purchase Intention and Brand Admiration

2021 ◽  
Vol 16 (5) ◽  
pp. 1217-1230
Author(s):  
Shuchi Gupta ◽  
Nishad Nawaz ◽  
Adel Abdulmhsen Alfalah ◽  
Rana Tahir Naveed ◽  
Saqib Muneer ◽  
...  
Keyword(s):  
Social Media ◽  
Purchase Intention ◽  
Structural Equation ◽  
Mediating Effect ◽  
Equation Modeling ◽  
Csr Communication ◽  
Consumer Purchase Intention ◽  
Relationship Of ◽  
The Impact ◽  
The Relationship

With the advent of the Internet and other digital technologies, contemporary businesses from all sectors are using social media for communication with consumers to engage them meaningfully with a brand. However, the use of social media for corporate social responsibility (CSR) communication is relatively new to the existing literature. Likewise, the impact of CSR communication through social media (CSR-S) on consumer emotions and behavior is, to date, underexplored. To address this, the present research aims to test the relationship of CSR-S on brand admiration and consumer purchase intention. The study proposes a direct relationship between CSR-S and purchase intention with a mediating effect of brand admiration. The data were collected from the banking consumers of Pakistan through a self-administered questionnaire. The authors distributed 800 questionnaires and received 463 questionnaires useful for data analysis, so the present research study response rate was around 59%. The data were analyzed using the structural equation modeling (SEM) technique in AMOS. The results revealed that CSR-S is positively related to purchase intention (β = 0.233). The results further showed that brand admiration partially mediates this relationship (β = 0.079). The survey respondents confirmed that their bank’s CSR communication helps enhance their purchase likelihood and their feelings of admiration for their bank. These findings will help policymakers at banking institutions better understand the importance of CSR communication on different social media platforms to achieve consumer-related outcomes.

scholarly journals Ethics of Retailers and Consumer Behavior in E-Commerce

2020 ◽  
Vol 11 (1) ◽  
pp. 107-126
Author(s):  
Zhi Yang ◽  
Quang Van Ngo ◽  
Chung Xuan Thi Nguyen
Keyword(s):  
Electronic Commerce ◽  
Communication Technology ◽  
Purchase Intention ◽  
Purchase Decision ◽  
Information Communication ◽  
Significant Relationships ◽  
Online Retailers ◽  
Relationship Of ◽  
The Impact ◽  
The Relationship

In the era of the information-communication technology with the development of electronic commerce, consumers can buy almost everything anywhere and at any time. One of the greatest benefits of e-commerce has been the convenience and the vast choices which consumers get online. However, some serious issues exist that impede consumers from transaction online. These issues have attracted the attention of many marketing researchers in recent years. In this research, the authors focus on the impact of consumers' ethics perception of e-retailer on their purchase intention and satisfaction. The authors also try to clarify the roles of trust and commitment in the relationship of ethics on consumers purchase decision and satisfaction because of their importance in e-commerce but also the privation in the research of previous studies. The data collected from a survey of 390 online consumers in Vietnam. Results reveal that there are significant relationships between online retailers' ethics and consumers' purchase intention and satisfaction via the mediation of trust and commitment.

Stress-strain curve of paper revisited

2012 ◽  
Vol 27 (2) ◽  
pp. 318-328 ◽  
Author(s):  
Svetlana Borodulina ◽  
Artem Kulachenko ◽  
Mikael Nygårds ◽  
Sylvain Galland
Keyword(s):  
Three Dimensional ◽  
Strain Curve ◽  
Failure Behavior ◽  
Three Dimensional Model ◽  
Stress Strain Curve ◽  
Stress Strain ◽  
Fiber Network ◽  
Bonding Parameters ◽  
Particle Level ◽  
The Impact

Abstract We have investigated a relation between micromechanical processes and the stress-strain curve of a dry fiber network during tensile loading. By using a detailed particle-level simulation tool we investigate, among other things, the impact of “non-traditional” bonding parameters, such as compliance of bonding regions, work of separation and the actual number of effective bonds. This is probably the first three-dimensional model which is capable of simulating the fracture process of paper accounting for nonlinearities at the fiber level and bond failures. The failure behavior of the network considered in the study could be changed significantly by relatively small changes in bond strength, as compared to the scatter in bonding data found in the literature. We have identified that compliance of the bonding regions has a significant impact on network strength. By comparing networks with weak and strong bonds, we concluded that large local strains are the precursors of bond failures and not the other way around.

A Research on the Morphology and Composition of Flocs (Part 1: Floc Breaage Disregarded)

2013 ◽  
Vol 726-731 ◽  
pp. 1566-1572 ◽  
Author(s):  
Shi Qiang Ding ◽  
Qing Na Li ◽  
Xin Rong Pang ◽  
Ji Run Xu
Keyword(s):  
Dimensional Space ◽  
Three Dimensional ◽  
New Classification ◽  
Suspension Viscosity ◽  
Primary Particles ◽  
Long Time ◽  
Relationship Of ◽  
The Relationship ◽  
Three Dimensional Space ◽  
Floc Breakage

The characteristics of flocs aggregated in flocculation have been paid more and more attention for a long time. In this paper, a new classification and analyses method dealing with the flocs is developed. The flocs formed after flocculation is divided into four kinds, including the left primary particles, linear flocs with all component particles in a line, planar flocs with all component particles on a plane and volumetric flocs with all component particles in a three-dimensional space. By analyzing the formation approaches of different kind of flocs regardless of the floc breakage, the number of every kind of floc is analyzed to be related with the suspension concentration mathematically. After comparing the different items in the models describing the relationship of floc number and concentration, a series of simplified expressions are presented. Lastly, a mathematical equation relating the measurable suspension viscosity with the numbers of different flocs is obtained.

The impact of tinnitus characteristics and associated variables on tinnitus-related handicap

2015 ◽  
Vol 130 (1) ◽  
pp. 25-31 ◽  
Author(s):  
S Degeest ◽  
P Corthals ◽  
I Dhooge ◽  
H Keppler
Keyword(s):  
Additional Insight ◽  
Tinnitus Handicap Inventory ◽  
Hearing Status ◽  
Questionnaire Score ◽  
Relationship Of ◽  
The Impact ◽  
The Relationship ◽  
Sample Case ◽  
Insight Into ◽  
Associated Variables

AbstractObjective:This study aimed to determine the characteristics of tinnitus and tinnitus-related variables and explore their possible relationship with tinnitus-related handicap.Methods:Eighty-one patients with chronic tinnitus were included. The study protocol measured hearing status, tinnitus pitch, loudness, maskability and loudness discomfort levels. All patients filled in the Tinnitus Sample Case History Questionnaire, the Hyperacusis Questionnaire and the Tinnitus Handicap Inventory. The relationship of each variable with the Tinnitus Handicap Inventory score was evaluated by univariate and multivariate analyses.Results:Five univariables were associated with the Tinnitus Handicap Inventory score: loudness discomfort level, subjective tinnitus loudness, tinnitus awareness, noise intolerance and Hyperacusis Questionnaire score. Multiple regression analysis showed that the Hyperacusis Questionnaire score and tinnitus awareness were independently associated with the Tinnitus Handicap Inventory score.Conclusion:Hyperacusis and tinnitus awareness were independently associated with the Tinnitus Handicap Inventory score. Questionnaires on tinnitus and hyperacusis are especially suited to providing additional insight into tinnitus-related handicap and are therefore useful for evaluating tinnitus patients.

Sign in / Sign up

Export Citation Format

Share Document