Study on the Sound Absorption Properties of Several Kinds of Fibers

2011 ◽  
Vol 332-334 ◽  
pp. 959-962
Author(s):  
Yong Hua Ren ◽  
Xiao Ning Sun ◽  
Hong Song
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Cavity Length ◽  
Natural Fibers ◽  
Influence Factors ◽  
Sound Absorption Coefficient ◽  
Cotton Wool ◽  
Absorption Properties ◽  
Material Thickness ◽  
Noise Frequency

In this paper, four kinds of natural fibers (cotton, wool, silk and ramie) are studied. Three experimental programs are designed, and influence factors of sound absorption properties of porous sound absorption material are discussed. With the change of material thickness and cavity length, the variation of sound absorption coefficient is obtained in different noise frequency.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

Physical and Sound Absorption Properties of Spent Tea Leaf Fiber Filled Polyurethane Foam Composite

2014 ◽  
Vol 660 ◽  
pp. 541-546 ◽  
Author(s):  
Qumrul Ahsan ◽  
Chia Pooi Ching ◽  
Mohd Yuhazri bin Yaakob
Keyword(s):  
Absorption Coefficient ◽  
Polyurethane Foam ◽  
High Resistance ◽  
Sound Absorption ◽  
Filler Loading ◽  
Tea Plant ◽  
Sound Absorption Coefficient ◽  
Tea Leaves ◽  
Absorption Properties ◽  
Spent Tea Leaves

Spent tea leaves (STL) from tea producing factories can be considered as new resources for sound absorbing polyurethane (PU) matrix composite materials because STL are rich in polyphenols (tannins) which cause high durability, high resistance to fungal and termites, and high resistance to fire. The research aims to study the physical characteristics of STL and the effect of dispersion morphology of STL on the sound absorption properties of polyurethane foam composites by varying filler loading. Three grades of STL fibers either as received or granulated are used in this study, namely BM-FAE and SWBHE derived from the stalk while FIBER-FAE derived from the leaves of the tea plant. The PU/STL composites are fabricated through open molding method with a fiber loading of 16 wt. %. The fabricated composites are then subjected to physical and sound absorption testing as well as microscopic observations to analyze the distribution of filler in composite. The study shows that as-received FIBER-FAE spent tea leaves provide the best sound absorption coefficient and for composites using granulated fibers from any grade have lower sound absorption coefficient. These results show that a novel kind of sound absorption materials with the recycling of waste materials can be obtained for the solution of noise and environmental pollution.

scholarly journals Experimental Study on the Sound Absorption Properties of Finger Millet Straw, Darbha, and Ripe Bulrush Fibers

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
K. M. Rakesh ◽  
Ramachandracharya Srinidhi ◽  
S. Gokulkumar ◽  
K. S. Nithin ◽  
S. Madhavarao ◽  
...  
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Finger Millet ◽  
Natural Fiber ◽  
Fiber Type ◽  
Natural Fibers ◽  
Noise Pollution ◽  
Sound Absorption Coefficient ◽  
Human Beings ◽  
Fiber Arrangement

Nowadays, emerging noise pollution by external factors causes harmful diseases in human beings. The development of a bio-based filler or panel will help to eliminate some unwanted noise in working places and living rooms. This work aimed to develop an ecowaste fiber (leftover after harvesting)-based sound absorber and analyze its capabilities for sound absorption. The ecowaste fibers are collected by the gleaning process, i.e., the process of collecting leftovers from fields. The sound absorption capabilities of three natural fibers extracted from Eleusine coracana (Finger millet) straw, Desmostachya bipinnata (Darbha), and Typha domingensis (Ripe bulrush) plants are investigated in this study, both individually and in hybrid combinations. The sound absorption property mainly depends on factors such as porosity, flow resistivity, thickness, density, and tortuosity. Fiber length and fiber type play a significant role when fibers are arranged individually or in hybrid combinations. The stacking effect on the sound absorption coefficient of hybridized fiber arrangement was experimentally analyzed. The sound absorption coefficient (α) was found to be lower in the range of 1000 Hz–2500 Hz for all the combinations. As a homogenous fiber arrangement, the darbha fiber exhibited the better NRC (noise reduction coefficient) of 0.86 for 50 mm thickness among three different fibers and as a hybrid composition, ripe bulrush and darbha fibers exhibited NRC of 0.90 which is more capable of absorbing sound in the critical frequency range of 500 to 2000 Hz. These types of natural fiber fillers are highly capable of better sound absorbing and used in the applications such as classrooms, sound recording rooms, and theatres.

scholarly journals Sound absorption properties of multi-layer structural composite materials based on waste corn husk fibers

2020 ◽  
Vol 15 ◽  
pp. 155892502091086
Author(s):  
Lihua Lyu ◽  
Jing Lu ◽  
Jing Guo ◽  
Yongfang Qian ◽  
Hong Li ◽  
...  
Keyword(s):  
Composite Materials ◽  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Sound Absorption Coefficient ◽  
Absorption Properties ◽  
Cavity Depth ◽  
Air Cavity ◽  
Corn Husk ◽  
Structural Composite

In order to find a reasonable way to use the waste corn husk, waste degummed corn husk fibers were used as reinforcing material in one type of composite material. And polylactic acid particles were used as matrix material. The composite materials were prepared by mixing and hot-pressing process, and they were processed into the micro-slit panel. Then, the multi-layer structural sound absorption composite materials were prepared sequentially by micro-slit panel, air cavity, and flax felt. Finally, the sound absorption properties of the multi-layer structural composite materials were studied by changing flax felt thickness, air cavity depth, slit rate, and thickness of micro-slit panel. As the flax felt thickness varied from 0 to 10 mm in 5 mm increments, the peak of sound absorption coefficient shifted to low frequency. The sound absorption coefficient in the low frequency was improved with the air cavity depth varied from 0 to 10 mm in 5 mm increments. With the slit rate increased from 3% to 7% in 2% increments, the peak of sound absorption coefficient shifted to high frequency. With the thickness of micro-slit panel increased from 2 to 6 mm in 2 mm increments, the sound absorption bandwidth was broaden, and the peak of sound absorption coefficient was increased and shifted to low frequency. Results showed that the highest sound absorption coefficient of the multi-layer structural composite materials was about 1 under the optimal process conditions.

Comparative Study of Sound Absorption Coefficients of Coir/Kenaf/Sugarcane Bagasse Fiber Reinforced Epoxy Composites

2017 ◽  
Vol 730 ◽  
pp. 48-53 ◽  
Author(s):  
Elammaran Jayamani ◽  
Soon Kok Heng ◽  
Muhammad Khusairy bin Bakri ◽  
Sinin Hamdan
Keyword(s):  
Absorption Coefficient ◽  
Sugarcane Bagasse ◽  
Sound Absorption ◽  
Transfer Functions ◽  
Natural Fibers ◽  
Epoxy Composites ◽  
Sound Absorption Coefficient ◽  
Coconut Coir ◽  
Impedance Tube Method ◽  
Bagasse Fiber

This research focuses on the sound absorption coefficient of three different natural fibers reinforced epoxy composites. The natural fibers used are coconut coir, kenaf, and sugarcane bagasse. All of these fibers were mixed with epoxy resin and hardener with a ratio of 4:1. The mixtures were then poured into a circular mold and compressed by using compression molding technique. It was left for curing for 24 hours at standard room temperature. The results were obtained using the two-microphone transfer functions impedance tube method according to ASTM E1050-12. It is found that as the fiber loading increased, the sound absorption coefficient of the composites increased. 20wt% Coconut coir epoxy composites and 20wt% kenaf fiber epoxy composites have the highest sound absorption coefficient with almost similar sound absorption of 0.078 at 5000Hz. While, 20wt% sugarcane bagasse epoxy composites have sound absorption of 0.075 at 5000Hz.

Evaluation and comparison the properties of acoustic boards made of date palm fiber

BioResources ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. 7702-7715
Author(s):  
Mehdi Alishiri ◽  
Amir Hooman Hemmasi ◽  
Habibollah Khademi Eslam ◽  
Sedigheh Basirjafari ◽  
Mohammad Talaeipour
Keyword(s):  
Absorption Coefficient ◽  
Sodium Silicate ◽  
Sound Absorption ◽  
Date Palm ◽  
Agricultural Waste ◽  
Natural Fibers ◽  
Control Sample ◽  
Sound Absorption Coefficient ◽  
Synthetic Fibers ◽  
Particle Length

Applying acoustic panels made of natural fibers, due to their high biodegradable characteristics, light weight, low density, cheap price and non-toxicity, are proper alternatives to acoustic absorbers made of synthetic fibers. Considering their stance and vast applicability in industry, the possibility of producing them of natural palm fibers with sodium silicate adhesive of 10 and 20% in two 16 and 32 mm thicknesses, 350 and 450 kg/m3 densities, 50 and 100 mm particles length (strands), as variable factors in 16 types of matched panels with 3 repetitions is proposed in this article. The palm-trunk discs constituted the control sample. The effect of variables on sound absorption coefficient was assessed. The effect of variable thickness and adhesive percentage on all frequencies was significant and the effect of density variable on all frequencies except 250 and 2000 Hz was also significant. The effect of particle length was significant except at the 500 Hz frequency. The effects of all variables on porosity were significant. The results of this study suggest that by applying date palm-trunk (an agricultural waste) combined with sodium silicate adhesive, industrial environment-friendly panels can be produced with proper sound absorption coefficient in the field of acoustics. This 32-mm-thick panel was composed of 80% date palm-trunk particles of 50 mm length, 450 kg/m3 density, and 20% sodium silicate adhesive.

Sound Absorption Properties of Fiber and Porous Materials

2005 ◽  
Vol 475-479 ◽  
pp. 2687-2690 ◽  
Author(s):  
Bo Young Hur ◽  
Bu Keoun Park ◽  
Dong-In Ha ◽  
Yong Su Um
Keyword(s):  
Absorption Coefficient ◽  
Porous Materials ◽  
Sound Absorption ◽  
Absorption Rate ◽  
Metal Foam ◽  
Acoustic Property ◽  
Glass Wool ◽  
Sound Absorption Coefficient ◽  
Absorption Properties ◽  
Reduction Coefficient

The porous materials, such as glass wool or foam, are generally used to attenuate noise. The most fundamental acoustic property of these porous materials is their sound absorption coefficient. The purpose of this paper is sintered fiber and porous materials sound absorption properties investigated. Sound absorption properties of sintered Al fiber has over 0.7 of sound absorption coefficient with 800-2000Hz frequency for 0.6 relative density and 10mm thickness. NRC (noise reduction coefficient) is 0.73. Metal foam have good sound absorption rate at 2000 ~ 4000Hz.

Influence of Thickness and Density of Nonwoven Sound-Absorbing Material on the Sound-Absorption Capability

2011 ◽  
Vol 197-198 ◽  
pp. 440-443 ◽  
Author(s):  
Wen Su ◽  
Xiao Ming Qian ◽  
Xin Yu Li ◽  
Shu Sen Liu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Sound Absorption Coefficient ◽  
Low Density ◽  
Density Structure ◽  
High Frequencies ◽  
Material Thickness ◽  
Nonwoven Materials ◽  
Absorbing Material

In this paper, the influence of thickness and density of nonwoven materials on the sound-absorption capability is studied through the serial experiments. The results show that the sound-absorption coefficient increases with material thickness increasing and this relationship is more distinct for low or mid frequencies than for high frequencies. When the material thickness is made constant, the sound-absorption coefficient increases with density increasing for low-mid frequencies, while the coefficient decreases with density for high frequencies. The conclusion is that the nonwoven materials with low density structure own better capacity in absorbing sound according to the experiment results.

Fabrication and Sound Absorption Properties of Porous Fe0.2(Co20Ni80)0.8 Alloy Microfibers

2012 ◽  
Vol 538-541 ◽  
pp. 2220-2223
Author(s):  
Xiang Qian Shen ◽  
Hong Bo Liu ◽  
Qing Rong Liang ◽  
Xin Chun Yang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Transformation Process ◽  
Sound Absorption Coefficient ◽  
Wave Tube ◽  
Absorption Properties ◽  
Thick Sample ◽  
Noise Absorption ◽  
Reduction Coefficient ◽  
Standing Wave Tube

The porous nanocrystalline Fe0.2(Co20Ni80)0.8 alloy microfibers with diameters of 2-4 μm have been prepared by the citrate-gel and phase transformation process. The sound absorption coefficient for microfibers samples is measured by the standing wave tube method and it is is over 0.8 for the 15 mm thick sample at the frequency range of 2300-6000 Hz, which is extended to 600-6300 Hz for the 40 mm thick sample. The band width with the sound absorption coefficient above 0.6 is wider than 4300 Hz for the 15 mm thick sample and 5800 Hz for the 40 mm thick sample. For the 40 mm thick sample, the maximum absorption coefficient, noise absorption coefficient, noise reduction coefficient and half-width of the absorption peak are 0.99, 0.59, 0.64 and 5828 Hz, respectively. These microfibers are promising advanced acoustic absorbers.

scholarly journals Flame-Retardant and Sound-Absorption Properties of Composites Based on Kapok Fiber

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2845 ◽  
Author(s):  
Lihua Lyu ◽  
Yuanyuan Tian ◽  
Jing Lu ◽  
Xiaoqing Xiong ◽  
Jing Guo
Keyword(s):  
Absorption Coefficient ◽  
Flame Retardant ◽  
Magnesium Hydroxide ◽  
Hot Pressing ◽  
Sound Absorption ◽  
Sound Absorption Coefficient ◽  
Absorption Properties ◽  
Pressing Method ◽  
Kapok Fiber ◽  
Properties Of Composites

In order to improve the utilization rate of kapok fiber, flame-retardant and sound-absorption composites were prepared by the hot pressing method with kapok fiber as the reinforced material, polyε-caprolactone as the matrix material, and magnesium hydroxide as the flame retardant. Then, the effects of hot pressing temperature, hot pressing time, density of composites, mass fraction of kapok fiber, thickness of composites, and air layer thickness on the sound-absorption properties of composites were analyzed, with the average sound absorption coefficient as the index. Under the optimal process parameters, the maximum sound absorption coefficient reached 0.830, the average sound absorption coefficient was 0.520, and the sound-absorption band was wide. Thus, the composites belonged to high-efficiency sound-absorbing material. The flame-retardant effect of magnesium hydroxide on the composites was investigated, and the limiting oxygen index could reach 31.5%. Finally, multifunctional composites based on kapok fiber with flame retardant properties, and sound-absorption properties were obtained.

Sign in / Sign up

Export Citation Format

Share Document