Synthesis and Characterization of Bioactive Sol – Gel Glass: A Preliminary Study

2011 ◽  
Vol 341-342 ◽  
pp. 21-25
Author(s):  
Dan Nicolae Ungureanu ◽  
Nicolae Angelescu ◽  
Adrian Catangiu ◽  
Elena Valentina Stoian ◽  
Cristiana Zizi Rizescu ◽  
...  
Keyword(s):  
Body Fluid ◽  
Sol Gel ◽  
In Vitro Study ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
X Ray ◽  
Sol Gel Process ◽  
Preliminary Study

Bioactive glasses based on SiO2-CaO-P2O5 system have been synthesized by sol – gel process. The powder glass obtained has been characterized by X-ray diffraction, X-ray fluorescence spectroscopy (XRF), and Fourier transform-infrared spectroscopy (FTIR). In vitro study reveals formation of apatite layer at surface of powder glass, after 3 days of soaking in simulated body fluid.

scholarly journals The Atomic-Scale Interaction of Bioactive Glasses with Simulated Body Fluid

2005 ◽  
Vol 480-481 ◽  
pp. 21-26 ◽  
Author(s):  
L.J. Skipper ◽  
F.E. Sowrey ◽  
D.M. Pickup ◽  
R.J. Newport ◽  
K.O. Drake ◽  
...  
Keyword(s):  
Simulated Body Fluid ◽  
Body Fluid ◽  
Sol Gel ◽  
Atomic Scale ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
Edge Structure ◽  
X Ray ◽  
X Ray Absorption

The formation of a carbonate-containing hydroxyapatite, HCAp, layer on bioactive calcium silicate sol-gel glass of the formula (CaO)0.3(SiO2)0.7 has been studied in-vitro in Simulated Body Fluid (SBF). Extended X-ray Absorption Fine Structure (EXAFS), X-ray Absorption Near Edge Structure (XANES), X-ray diffraction (XRD), and solid state nuclear magnetic resonance (NMR) measurements have been performed with results showing the formation of a significantly amorphous HCAp layer after less than 5 hours in solution.

scholarly journals Sol-Gel Template Synthesis and Characterization of Lu2O3:Eu3+ Nanowire Arrays

Micromachines ◽  
2018 ◽  
Vol 9 (11) ◽  
pp. 601
Author(s):  
Yahua Hu ◽  
Mu Gu ◽  
Xiaolin Liu ◽  
Juannan Zhang ◽  
Shiming Huang ◽  
...  
Keyword(s):  
Sol Gel ◽  
Nanowire Arrays ◽  
X Ray Diffraction ◽  
Aao Template ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Sol Gel Process ◽  
Optical Luminescence ◽  
Uniform Diameter

Uniform Lu2O3:Eu3+ nanowire arrays were successfully prepared by the sol-gel process using anodic aluminum oxide (AAO) templates. The as-synthesized nanowires are homogeneous, highly ordered, and dense and have a uniform diameter of ~300 nm defined by the AAO templates. The X-ray diffraction and selected area electron diffraction results show that the Lu2O3:Eu3+ nanowires have a polycrystalline cubic structure, and the crystallite size of the Lu2O3:Eu3+ nanowires is confined by the AAO template. The nanowires within the AAO template showed good photoluminescence and X-ray-excited optical luminescence performances for Lu2O3:Eu3+. The emission peaks were attributed to the 5D0 → 7FJ transitions of Eu3+ (J = 0, 1, 2, 3).

Sol-gel derived Ba(Mg1/3Ta2/3)O3 thin films: Preparation and structure

1997 ◽  
Vol 12 (3) ◽  
pp. 596-599 ◽  
Author(s):  
Ji Zhou ◽  
Qing-Xin Su ◽  
K. M. Moulding ◽  
D. J. Barber
Keyword(s):  
Thin Films ◽  
Annealing Temperature ◽  
Volume Fraction ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Small Grains

Ba(Mg1/3Ta2/3)O3 thin films were prepared by a sol-gel process involving the reaction of barium isopropoxide, tantalum ethoxide, and magnesium acetate in 2-methoxyethanol and subsequently hydrolysis, spin-coating, and heat treatment. Transmission electron microscopy, x-ray diffraction, and Raman spectroscopy were used for the characterization of the thin films. It was shown that the thin films tend to crystallize with small grains sized below 100 nm. Crystalline phase with cubic (disordered) perovskite structure was formed in the samples annealed at a very low temperature (below 500 °C), and well-crystallized thin films were obtained at 700 °C. Although disordered perovskite is dominant in the thin films annealed below 1000 °C, a low volume fraction of 1 : 2 ordering domains was found in the samples and grows with an increase of annealing temperature.

IN VITRO OSTEO-INDUCTIVE CHARACTERIZATION OF NANO-GRADE PEARL POWDERS

2011 ◽  
Vol 23 (02) ◽  
pp. 135-140
Author(s):  
Mei-Ju Hou ◽  
Chi-Jen Shih
Keyword(s):  
Inductively Coupled Plasma ◽  
Body Fluid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Hydroxyl Apatite ◽  
Inductive Behavior

The main objective of this study is to characterize the in vitro osteo inductive behavior of pearl nano crystallites. The results obtained from X-ray diffraction, Fourier transform infrared (FTIR) spectra, and inductively coupled plasma mass (ICP-MS) analysis demonstrate that the pearls can induce the formation of a hydroxyl apatite (HA) layer on their surface in simulated body fluid (SBF), even after only short soaking periods. Further, MC3T3-E1 cells can easily attach and spread on the pearl powders after 1 h of cultivation.

Bioglasses in the SiO2-CaO-P2O5 System

2008 ◽  
Vol 47-50 ◽  
pp. 1063-1066 ◽  
Author(s):  
Costel Birsan ◽  
Cristina Ghitulica ◽  
Ecaterina Andronescu ◽  
Cristina Ionita ◽  
Mihaela Birsan
Keyword(s):  
Body Fluid ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Silica Content ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Physiological Serum ◽  
P2o5 System

The aim of the study was the synthesis and characterization of bioactive osteoinductive glasses, in the SiO2 – CaO – P2O5 system. In order to maintain the bioactive character of bioglasses, for SiO2 contents higher than 60%, the sol – gel method was used for preparation. On the obtained powders, thermal, grain size and X - ray diffraction analysis were performed. The X - ray diffraction emphasized the formation of phosphate phases, whose proportion decreases as the silica content is increased. Later, the powders were thermally treated at temperatures between 1000 and 14000C, the phase composition evolution being monitored through XRD analysis. On the powder suspensions in physiological serum, the evolution of pH was investigated, in order to establish the chemical stability. The behavior of the obtained powders in physiological medium was studied, by immersing samples in simulated body fluid and excerpted after different periods of time.

scholarly journals Structural and Magneto-Optical Characterization of La, Nd: Y2O3 Powders Obtained via a Modified EDTA Sol–Gel Process and HIP-Treated Ceramics

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4928
Author(s):  
Andrzej Kruk
Keyword(s):  
Sol Gel ◽  
Hot Isostatic Pressing ◽  
Rare Earth Ions ◽  
X Ray Diffraction ◽  
Thermal Dependence ◽  
Nanosized Powders ◽  
Verdet Constant ◽  
X Ray ◽  
Sol Gel Process

In this study, pure Y2O3, La0.1Y1.9O3 and La0.1Nd0.12Y1.78O3 nanosized powders were successfully synthesized by a modified sol–gel method. Pure and rare-earth ions doped yttria powders were characterized by X-ray diffraction, scanning electron microscopy and Brunauer–Emmett–Teller methods. The powders were sintered by the hot isostatic pressing process. The highest in-line transmittance of 56% was obtained at 800 nm and increased in the IR region. The influence of the lanthanum and neodymium ions on the physicochemical properties of yttria were discussed. The La-Nd-doped material exhibited a Verdet constant over 4000 deg/T·m at 400 nm and low thermal dependence. An interesting evolution of the Verdet constant across the absorption band with high resolution was studied. A study of the optical and magneto-optical properties of yttria doped with Nd3+ and La3+ is discussed in this paper.

ELABORATION AND CHARACTERIZATION OF La4Ni3O10 CATHODE MATERIAL (SOFC) BY SOL-GEL PROCESS

2011 ◽  
Vol 1326 ◽  
Author(s):  
Rene Fabian Cienfuegos ◽  
Leonardo Chávez Guerrero ◽  
Sugeheidy Carranza ◽  
Laurie Jouanin ◽  
Guillaume Marie ◽  
...  
Keyword(s):  
Cathode Material ◽  
Sol Gel ◽  
Synthesis Method ◽  
Solid Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Metallic Salts ◽  
Sol Gel Process

ABSTRACTThe goal in this study was to synthesize a lanthanum - nickel phase (Ruddlesden-Popper phases) La4Ni3O10. This material was prepared using a polymeric route. An easy synthesis method is presented in order to obtain an economical cathode material, which can be used in Solid Oxide Fuel Cells (SOFC). The polymeric precursors were prepared following the Castillo method. The originality of this work was to optimize the ratio HMTA/ metallic salts from 1 to 6. The obtained powders were characterized by thermal analysis; Differential Scanning Calorimetry (DSC Q10 Instrument TA), Thermogravimetric Analysis (TGA - Q50 Instrument TA-) and X-ray diffractometer (Bruker, D8 Advance diffractometer), in order to determine the crystallized phase. Experiments 5 and 6 did not present coagulation but after few days, solution 5 was transformed into a gel. Gels 2 to 5 were heated in order to obtain a solid material. These powders are characterized by thermogravimetric and thermo-differential methods. The powders obtained at 800, 900 and 1000°C were analyzed by X-ray diffraction and it was found that the temperature to get to the La4Ni3O10 phase was 1000ºC.

Preparation and Characterization of Pr2Ti2O7 by Sol-Gel Process

2017 ◽  
Vol 748 ◽  
pp. 413-417
Author(s):  
Chun Yu Long ◽  
Fang Fang Peng ◽  
Min Min Jin ◽  
Pei Song Tang ◽  
Hai Feng Chen
Keyword(s):  
Methyl Orange ◽  
Single Phase ◽  
Raw Materials ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Illumination Time ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir

Using Pr (NO3)3, butyl titanate, ethylene glycol and citric acid as main raw materials, praseodymium titanate (Pr2Ti2O7) was prepared by the sol-gel process. The samples were characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), thermal gravity-differential thermal analysis (TG-DTA), diffuse-reflection spectra (DRS) and Fourier transform infrared (FT-IR). The effect of different calcination temperature and illumination time on the photocatalytic properties of Pr2Ti2O7 was investigated. It was found that the single phase Pr2Ti2O7 could be obtained through sol-gel process and calcination at 1000 °C. The Pr2Ti2O7 samples calcination at 1000 °C were uniform , and the resulting product had a particle size of 200 nm and an optical band gap of 3.26 eV. Under ultraviolet light, the degradation of methyl orange arrived to 80.11% after 180 min of photocatalytic reaction. The Pr2Ti2O7 samples showed good photocatalytic activity for decomposition of methyl orange.

In Vitro Culture of Osteoblasts with Three Dimensionally Ordered Macroporous Sol-Gel Bioactive Glass (3DOM-BG) Particles

2005 ◽  
Vol 284-286 ◽  
pp. 655-658 ◽  
Author(s):  
Kai Zhang ◽  
Newell R. Washburn ◽  
Joseph M. Antonucci ◽  
Carl G. Simon
Keyword(s):  
Body Fluid ◽  
Colloidal Crystal ◽  
Sol Gel ◽  
Molar Fraction ◽  
Bioactive Glasses ◽  
Templating Method ◽  
Sol Gel Process ◽  
Colloidal Crystal Templating ◽  
Ordered Macroporous

Three dimensionally ordered macroporous sol-gel bioactive glasses (3DOM-BGs)are a type of biomaterial that is both bioactive and resorbable. In this study, 80 % SiO2 – 20 % CaO (molar fraction) 3DOM-BG particles were prepared using a colloidal crystal templating method via a sol-gel process. The as-prepared 3DOM-BG particles can quickly convert to a calcium-deficient, bone-like apatite after soaking in a simulated body fluid (SBF). MC3T3-E1 osteoblastic cells were cultured in the presence of 3DOM-BG particles. Preliminary results from cell studies showed that 3DOM-BG particles are not cytotoxic and are compatible with MC3T3-E1 osteoblast-like cells in vitro.

Preparation and Characterization of Akermanite/Merwinite Scaffolds for Bone Tissue Repair

2020 ◽  
Vol 44 ◽  
pp. 73-81
Author(s):  
Mojtaba Ansari ◽  
Farzad Malmir ◽  
Amir Salati
Keyword(s):  
Bone Tissue ◽  
Bone Marrow Stromal Cells ◽  
Sol Gel ◽  
Magnesium Silicate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcium Magnesium ◽  
Potential Use

The ceramics in the system CaO–MgO–SiO2 has recently attracted a great deal of attention because they display a good in vitro bioactivity and have potential use as bone implants. Biphasic calcium-magnesium-silicate ceramics were prepared by a sol-gel method. The dried gel with chemical composition 3CaO.MgO.2SiO2 was thermally treated at 1200 °C for 2 hrs. The structural behavior of the synthesized ceramics was examined by means of X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). Merwinite crystalline phase and akermanite phase were recognized. Then, porous akermanite/merwinite scaffolds were prepared to utilize polymer sponge method and evaluated by employing SEM. Furthermore, bone marrow stromal cells (BMSC) adhesion and proliferation on the scaffolds were evaluated by MTT assay test. Differentiation of the cells was assessed by measuring alkaline phosphatase (ALP) activity. The results demonstrated that BMSC adhered and spread well on akermanite scaffolds and proliferated with the increase in the culture time, and the differentiation rate of osteoblasts on scaffolds was comparable to that on blank culture plate control. Thus, the obtained results presented that the akermanite/merwinite scaffolds deserve attention for bone tissue engineering applications.

Sign in / Sign up

Export Citation Format

Share Document