10-Point DFT and its Application in Power System Harmonic Analysis

2012 ◽  
Vol 433-440 ◽  
pp. 7458-7464
Author(s):  
Dao Lin Li ◽  
Hai Jun Li
Keyword(s):  
Power Systems ◽  
Power System ◽  
Harmonic Analysis ◽  
Efficient Algorithm ◽  
Barrier Effect ◽  
Spectral Leakage ◽  
Simulation Results

In this paper, an efficient algorithm for computing 10-point DFT, radix-10 FFT algorithm for computing10 Superscript textMSubscript text-point DFT and N=L×10 Superscript textMSubscript text-point DFT are presented. FFT is often employed in power systems harmonics analysis even though it is not accurate due to spectral leakage and barrier effect. When N=L×10Superscript textMSubscript text-point DFTs are used to analyze harmonics in power systems, comparing to N=2 Superscript textMSubscript text-point DFTs, very accurate harmonic parameters can be obtained. The simulation results in MATLAB show that the methods are feasible and effective to enhance analysis accuracy.

scholarly journals Fast 10-Point DFT Algorithm for Power System Harmonic Analysis

2021 ◽  
Vol 11 (15) ◽  
pp. 7007
Author(s):  
Janusz P. Paplinski ◽  
Aleksandr Cariow
Keyword(s):  
Computational Complexity ◽  
Power System ◽  
Harmonic Analysis ◽  
Efficient Algorithm ◽  
System Analysis ◽  
Spectral Leakage ◽  
Power System Analysis ◽  
Improve Accuracy ◽  
The Cost ◽  
Harmonic Power

This article presents an efficient algorithm for computing a 10-point DFT. The proposed algorithm reduces the number of multiplications at the cost of a slight increase in the number of additions in comparison with the known algorithms. Using a 10-point DFT for harmonic power system analysis can improve accuracy and reduce errors caused by spectral leakage. This paper compares the computational complexity for an L×10M-point DFT with a 2M-point DFT.

scholarly journals The Flexible Operation of Coal Power and Its Renewable Integration Potential in China

2019 ◽  
Vol 11 (16) ◽  
pp. 4424 ◽  
Author(s):  
Chunning Na ◽  
Huan Pan ◽  
Yuhong Zhu ◽  
Jiahai Yuan ◽  
Lixia Ding ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Large Scale ◽  
Renewable Integration ◽  
Flexible Resources ◽  
Feasible Option ◽  
Coal Power ◽  
Simulation Results ◽  
Flexible Operation

At present time, China’s power systems face significant challenges in integrating large-scale renewable energy and reducing the curtailed renewable energy. In order to avoid the curtailment of renewable energy, the power systems need significant flexibility requirements in China. In regions where coal is still heavily relied upon for generating electricity, the flexible operations of coal power units will be the most feasible option to face these challenges. The study first focused on the reasons why the flexible operation of existing coal power units would potentially promote the integration of renewable energy in China and then reviewed the impacts on the performance levels of the units. A simple flexibility operation model was constructed to estimate the integration potential with the existing coal power units under several different scenarios. This study’s simulation results revealed that the existing retrofitted coal power units could provide flexibility in the promotion of the integration of renewable energy in a certain extent. However, the integration potential increment of 20% of the rated power for the coal power units was found to be lower than that of 30% of the rated power. Therefore, by considering the performance impacts of the coal power units with low performances in load operations, it was considered to not be economical for those units to operate at lower than 30% of the rated power. It was believed that once the capacity share of the renewable energy had achieved a continuously growing trend, the existing coal power units would fail to meet the flexibility requirements. Therefore, it was recommended in this study that other flexible resources should be deployed in the power systems for the purpose of reducing the curtailment of renewable energy. Furthermore, based on this study’s obtained evidence, in order to realize a power system with high proportions of renewable energy, China should strive to establish a power system with adequate flexible resources in the future.

scholarly journals Ant Lion Optimized Fractional Order Fuzzy Pre-Compensated Intelligent Pid Controller for Frequency Stabilization of Interconnected Multi-Area Power Systems

2019 ◽  
Vol 2 (2) ◽  
pp. 17 ◽  
Author(s):  
A. H. Gomaa Haroun ◽  
Yin-Ya Li
Keyword(s):  
Power Systems ◽  
Power System ◽  
Fractional Order ◽  
Frequency Control ◽  
Absolute Error ◽  
Load Frequency Control ◽  
Computational Technique ◽  
Intelligent Pid ◽  
Ant Lion ◽  
Simulation Results

Load frequency control (LFC) is considered to be the most important strategy in interconnected multi-area power systems for satisfactory operation and distribution. In order to transfer reliable power with acceptable quality, an LFC mechanism requires highly efficacy and intelligent techniques. In this paper, a novel hybrid fractional order fuzzy pre-compensated intelligent proportional-integral-derivative (PID) (FOFP-iPID) controller is proposed for the LFC of a realistic interconnected two-area power system. The proposed FOFP-iPID controller is incorporated into the power system as a secondary controller. In doing so, the parameters of the suggested FOFP-iPID controller are optimized using a more recent evolutionary computational technique called the Ant lion optimizer (ALO) algorithm utilizing an Integral of Time multiplied Absolute Error (ITAE) index. Simulation results demonstrated that the proposed FOFP-iPID controller achieves better dynamics performance under a wide variation of load perturbations. The supremacy of the proposed FOFP-iPID controller is demonstrated by comparing the results with some existing controllers, such as fractional order PID (FOPID) and fractional order intelligent PID (FOiPID) controllers for the identical system. Finally, the sensitivity analysis of the plant is examined and the simulation results showed that the suggested FOFP-iPID controller is robust and performs satisfactorily despite the presence of uncertainties.

scholarly journals Voltage Coordination via Communication in Large-Scale Multi-Area Power Systems. Part II: Simulation Results

2012 ◽  
Vol 433-440 ◽  
pp. 7183-7189
Author(s):  
Mohammad Moradzadeh ◽  
René Boel
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electricity Market ◽  
Large Scale ◽  
Test System ◽  
Distributed Model ◽  
Future Evolution ◽  
Distributed Model Predictive Control ◽  
Control Actions ◽  
Simulation Results

This two-part paper deals with the coordination of the control actions in a network of many interacting components, where each component is controlled by independent control agents. As a case study we consider voltage control in large electric power systems where ever-increasing pressures from the liberalization and globalization of the electricity market has led to partitioning the power system into multiple areas each operated by an independent Transmission System Operator (TSO). Coordination of local control actions taken by those TSOs is a very challenging problem as poorly coordinated operation of TSOs may endanger the power system security by increasing the risk of blackouts. This second part of the paper presents simulation results on a 12-bus 3-area test system, using the distributed model predictive control paradigm in order to design a coordinating model-based feedback controller. Coordination requires that each agent has some information on what the future evolution of its power flows to and from its neighbors will be. It will be shown that how the communication between agents can avoid voltage collapse in circumstances where classical uncoordinated controllers fail.

scholarly journals Bi-Objective Optimization Model for Optimal Placement of Thyristor-Controlled Series Compensator Devices

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2601
Author(s):  
Mohammad Reza Salehizadeh ◽  
Mahdi Amidi Koohbijari ◽  
Hassan Nouri ◽  
Akın Taşcıkaraoğlu ◽  
Ozan Erdinç ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electricity Market ◽  
Weather Conditions ◽  
Congestion Management ◽  
Optimal Placement ◽  
Novel Approach ◽  
Simulation Results ◽  
Increasing Demand ◽  
Thyristor Controlled Series Compensator

Exposure to extreme weather conditions increases power systems’ vulnerability in front of high impact, low probability contingency occurrence. In the post-restructuring years, due to the increasing demand for energy, competition between electricity market players and increasing penetration of renewable resources, the provision of effective resiliency-based approaches has received more attention. In this paper, as the major contribution to current literature, a novel approach is proposed for resiliency improvement in a way that enables power system planners to manage several resilience metrics efficiently in a bi-objective optimization planning model simultaneously. For demonstration purposes, the proposed method is applied for optimal placement of the thyristor controlled series compensator (TCSC). Improvement of all considered resilience metrics regardless of their amount in a multi-criteria decision-making framework is novel in comparison to the other previous TCSC placement approaches. Without loss of generality, the developed resiliency improvement approach is applicable in any power system planning and operation problem. The simulation results on IEEE 30-bus and 118-bus test systems confirm the practicality and effectiveness of the developed approach. Simulation results show that by considering resilience metrics, the performance index, importance of curtailed consumers, congestion management cost, number of curtailed consumers, and amount of load loss are improved by 0.63%, 43.52%, 65.19%, 85.93%, and 85.94%, respectively.

Dynamic Modeling and Simulation on a Hybrid Power System for Dual-Motor-Drive Electric Tracked Bulldozer

2014 ◽  
Vol 494-495 ◽  
pp. 229-233 ◽  
Author(s):  
Hong Wang ◽  
Feng Chun Sun
Keyword(s):  
Power Systems ◽  
Power System ◽  
Dynamic Models ◽  
High Efficiency ◽  
Motor Drive ◽  
Hybrid Power Systems ◽  
Hybrid Power System ◽  
Hybrid Power ◽  
Simulation Results ◽  
The Mathematical Model

Hybrid power systems provide high-performances and high-efficiency power for electric bulldozer. This paper firstly constructs the mathematical model of driving motors system based on the design of dual-motor-driving propulsion system for bulldozer. Secondly, by using the setting values from a bulldozer, simulation work is implemented, and parameters of the hybrid power system are matched, and finally, based on MATLAB/Simulink ,dynamic models for the dual-motor-driving hybrid power system is established, and the simulation results are discussed. Simulation results demonstrate the validity of the hybrid power system model and the matching of the parameters of the hybrid power system is reasonable.

Power System Subsynchronous Oscillations Electromagnetic and Electromechanical Transient Hybrid Real-Time Simulation Based on RTDS

2012 ◽  
Vol 433-440 ◽  
pp. 2850-2855
Author(s):  
Lei Shi ◽  
Xiang Ning Xiao
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Power System ◽  
Real Time ◽  
Hybrid Simulation ◽  
Simulation Program ◽  
Simulation Technology ◽  
Real Time Simulation ◽  
Time Simulation ◽  
Simulation Results

In this paper, power system electromagnetic and electromechanical transient hybrid real-time simulation technology is expounded in details, which has advantages of the electromagnetic transient simulation program and electromechanical ones. The more details needed to analyze the dynamic characteristics of power systems are provided by this hybrid simulation technology, and the scale of power system simulated is not limited in the hybrid simulation program. The hybrid simulation program is applied to analyze the power system subsynchronous oscillation problem occurred in a power plant with 4 turbine generators located in the northwestern China. According to the simulation results, it is clear that the stability of generators is threatened by the subsynchronous oscillations caused by capacitor series compensation in the transmission line connecting the power plant and the load center system. In meantime, the effectiveness of the countermeasure is validated simultaneously by the hybrid simulation results.

Decentralized Robust Coordinated Controller of Excitation and Valve for Improvement of Power System Stability

2014 ◽  
Vol 668-669 ◽  
pp. 462-465
Author(s):  
Zhi Min Li ◽  
Xin Yang Deng ◽  
Xiao Ming Mou ◽  
Shuang Rong ◽  
Tian Kui Sun ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Control Systems ◽  
Coordinated Control ◽  
Power System Stability ◽  
System Stability ◽  
Control Scheme ◽  
Terminal Voltage ◽  
Simulation Results ◽  
Generator Terminal

A novel robust control scheme for decentralized generator excitation and valve coordinated control systems to improve power system stability is proposed. By utilizing generator terminal voltage magnitude and phase angle to represent the interactions among generators, decentralized generator excitation and valve coordinated control in multi-machine power systems is achieved. The control is realized by robust parametric approach. Simulation results show that the proposed robust parametric coordinated control can improve power system stability.

High Performance Arbitrary Amplitude and Phase of Voltage Sags and Swells Generator with Series Injected Inverter by d-, q-Axis Controlled

2012 ◽  
Vol 433-440 ◽  
pp. 7195-7199
Author(s):  
Phongphat Tawanwongsri ◽  
Bunlung Neammanee
Keyword(s):  
Power Systems ◽  
Power System ◽  
High Performance ◽  
Phase Lag ◽  
Voltage Sags ◽  
Phase Lead ◽  
Arbitrary Amplitude ◽  
Power Quality Disturbances ◽  
Simulation Results ◽  
Phase Phase

Voltage sags and swells are the most common types of power quality disturbances. Often, voltage sags and swells caused by electrical fault in the power system. This allows devices that are installed in the power system damage. Therefore, we have generated voltage sags and swells to simulate events that occur in power systems for virtual reality. In this paper, voltage sags and swells generator (SSG) using the principles by d-, q-axis can be arbitrary control of the magnitude and phase of the injection voltage. The simulation results can confirm, the SSG can generate the arbitrary voltage sags/swells with in phase, phase lead or phase lag.

scholarly journals A New Adaptive Underfrequency Load Shedding Scheme to Improve Frequency Stability in Electric Power System

2021 ◽  
Vol 54 (2) ◽  
pp. 263-271
Author(s):  
Fethi Boussadia ◽  
Saad Belkhiat
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electrical Power ◽  
Frequency Instability ◽  
Frequency Stability ◽  
Electric Power System ◽  
Load Shedding ◽  
Electrical Power System ◽  
Current Frequency ◽  
Simulation Results

This paper proposes a new adaptive underfrequency load shedding scheme (UFLS) to avoid frequency instability in electrical power system during abnormal wide area disturbances. The developed scheme is based on online monitoring of the distance relay zone 3 decisions of some tie lines using (WAMS) and SCADA/EMS systems, to check rapidly and reliably the uncontrolled islanding conditions and, permit an automatic load shedding action to maintain frequency stability of power system. Simulation results on 400 kV Turkish transmission systems demonstrated the effectiveness of the proposed scheme compared to current frequency load shedding schemes which they cannot consider all possible circumstances because of their limited access to the power network data. Simulation results clearly indicate that large disturbances in power systems can be avoided and their propagation can also be stopped using the proposed scheme.

Sign in / Sign up

Export Citation Format

Share Document