Valve Parameters Design and Performance Test of Hydro-Pneumatic Spring with Trapezium Throttle Slice

2008 ◽  
Vol 44-46 ◽  
pp. 409-414
Author(s):  
Chang Cheng Zhou ◽  
Wei Xu
Keyword(s):  
Performance Test ◽  
Design Method ◽  
Design Parameters ◽  
Slice Thickness ◽  
Test Results ◽  
Opening Pressure ◽  
Mechanics Model ◽  
Hole Area ◽  
Valve Opening ◽  
And Performance

With the mechanics model, the analytic formula of the deformation for the trapezium throttle slice was established. By the vehicle parameters and valve opening velocity, the formula of valve opening pressure was built. Based on this, through the relation of pressure with deformation and flux at valve opening, the design formula of throttle slice thickness and throttle-hole area were established, the influencing factors to the design parameters were analyzed. A practical example of design of hydro-pneumatic spring was given, and the performance test was conducted. The analysis and test results show that the design method is effective and the formulas for throttle slice thickness and throttle-hole area are accurate enough, and have important meaning for the hydro-pneumatic spring design.

scholarly journals Thermodynamic Behaviors of a Kind of Self-Decoupling Magnetorheological Damper

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Guojun Yu ◽  
Chengbin Du ◽  
Tiger Sun
Keyword(s):  
Theoretical Model ◽  
Heat Dissipation ◽  
Performance Test ◽  
Design Method ◽  
Constraint Equation ◽  
Magnetorheological Damper ◽  
Design Parameters ◽  
Test Results ◽  
Damping Force ◽  
Conservation Of Energy

A theoretical model of temperature change on a kind of self-decoupling magnetorheological (SDMR) damper was established based on conservation of energy, and the constraint equation for structural design parameters of the SDMR damper was improved to satisfy heat dissipation requirements in this work. According to the theoretical model and improved constraint equation, the main structure parameters of SDMR damper were obtained and the damper was tested. The temperature performance test results indicate that the rising temperature makes the damping force decline, and the main affection factors of temperature variation are excitation methods and input current. The results also show that the improved constraint equation and design method introduced are correct and efficient in the engineering.

scholarly journals A modular design method based on TRIZ and AD and its application to cutter changing robot

2021 ◽  
Vol 13 (7) ◽  
pp. 168781402110343
Author(s):  
Mei Yang ◽  
Yimin Xia ◽  
Lianhui Jia ◽  
Dujuan Wang ◽  
Zhiyong Ji
Keyword(s):  
Modular Design ◽  
Design Method ◽  
Idea Generation ◽  
Design Parameters ◽  
Problem Analysis ◽  
Concept Design ◽  
Functional Requirements ◽  
Shield Tunneling ◽  
Structural Hierarchy ◽  
And Performance

Modular design, Axiomatic design (AD) and Theory of inventive problem solving (TRIZ) have been increasingly popularized in concept design of modern mechanical product. Each method has their own advantages and drawbacks. The benefit of modular design is reducing the product design period, and AD has the capability of problem analysis, while TRIZ’s expertise is innovative idea generation. According to the complementarity of these three approaches, an innovative and systematic methodology is proposed to design big complex mechanical system. Firstly, the module partition is executed based on scenario decomposition. Then, the behavior attributes of modules are listed to find the design contradiction, including motion form, spatial constraints, and performance requirements. TRIZ tools are employed to deal with the contradictions between behavior attributes. The decomposition and mapping of functional requirements and design parameters are carried out to construct the structural hierarchy of each module. Then, modules are integrated considering the connections between each other. Finally, the operation steps in application scenario are designed in temporal and spatial dimensions. Design of cutter changing robot for shield tunneling machine is taken as an example to validate the feasibility and effectiveness of the proposed method.

Physical and performance characteristics related to starter status, position, and division in Japanese collegiate American-football players

2021 ◽  
pp. 1-8
Author(s):  
Junta Iguchi ◽  
Minoru Matsunami ◽  
Tatsuya Hojo ◽  
Yoshihiko Fujisawa ◽  
Kenji Kuzuhara ◽  
...  
Keyword(s):  
Performance Test ◽  
Vertical Jump ◽  
American Football ◽  
Football Players ◽  
Jump Height ◽  
Test Results ◽  
Repetition Maximum ◽  
Vertical Jump Height ◽  
Division 1 ◽  
And Performance

BACKGROUND: Few studies have investigated the variations in body composition and performance in Japanese collegiate American-football players. OBJECTIVE: To clarify what characterizes competitors at the highest levels – in the top division or on the starting lineup – we compared players’ body compositions and performance test results. METHODS: This study included 172 players. Each player’s body composition and performance (one-repetition maximum bench press, one-repetition maximum back squat, and vertical jump height) were measured; power was estimated from vertical jump height and body weight. Players were compared according to status (starter vs. non-starter), position (skill vs. linemen), and division (1 vs. 2). Regression analysis was performed to determine characteristics for being a starter. RESULTS: Players in higher divisions and who were starters were stronger and had more power, greater body size, and better performance test results. Players in skill positions were relatively stronger than those in linemen positions. Vertical jump height was a significant predictor of being a starter in Division 1. CONCLUSION: Power and vertical jump may be a deciding factor for playing as a starter or in a higher division.

scholarly journals Desain Bilik Sterilisasi "White Box"

2021 ◽  
Vol 17 (1) ◽  
pp. 68-75
Author(s):  
Noor Hamidah ◽  
Dwi Anung Nindito ◽  
Tatau Wijaya Garib ◽  
Waluyo Nuswantoro ◽  
Mahdi Santoso
Keyword(s):  
Performance Test ◽  
Design Method ◽  
Skin Surface ◽  
The Body ◽  
Piping System ◽  
Design Activity ◽  
Test Function ◽  
Function Test ◽  
And Performance ◽  
Implementation Stage

ABSTRACT The sterilization chamber is designed to sterilize the body using a filler formulation that is not harmful to the skin surface. Formulation, namely the composition of filler fluids (type, dose and amount) using substances that are safe for the body accordingly, certainly provides benefits. The use of the sterilization booth uses the correct and safe filling fluid. The sterilization chamber uses a mist nozzle sprayer (with the appropriate discharge) to spray the filling liquid so that the user is safe. This sterilization booth is named "White Box". This "White Box" research aims to design (functional and structural) and test (function test and performance test) on a system and mechanism for condensing the condensation of a humidifier that can fill the sterilization room optimally. The design method of the "White Box" sterilization booth uses a qualitative method with the following phases: (1) The preparation stage, namely the functional design and the structural design of the "White Box"; (2) The implementation stage is analyzing the use of tools and materials and making sterilization booths; (3) Post-implementation stage, namely testing the sterilization chamber, including the function test and performance test of the sterilization chamber. The design activity of the "White Box" sterilization booth was carried out by testing various variations of the prototype, including variations in the dimensions of the distribution pipe, the shape of the distribution pipe, and variations of the piping system. The validation process includes: (1) The diameter of the pipe against humidifier dew bursts; (2) The shape of the piping against humidifier dew spray; and (3) the length of the pipe passage to the humidifier dew spray. ABSTRAKBilik sterilisasi didesain untuk mensterilisasi tubuh dengan menggunakan formulasi zat pengisi yang tidak berbahaya bagi permukaan kulit. Formulasi yaitu komposisi cairan pengisi (jenis, takaran dan jumlah) menggunakan zat yang aman bagi tubuh yang sesuai, tentu memberi manfaat. Penggunaan bilik sterilisasi menggunakan cairan pengisi yang benar dan aman. Bilik sterilisasi menggunakan mist nozzle sprayer (yang debitnya sesuai) untuk menyemprotkan cairan pengisinya sehingga pengguna aman. Bilik sterilisasi ini diberi nama "White Box". Penelitian "White Box"ini bertujuan merancang (fungsional dan struktural) dan menguji coba (uji fungsi dan uji kinerja) pada sebuah sistem dan mekanisme penyaluran pengembunan dari alat humidifier yang mampu memenuhi ruang bilik sterilisasi secara optimal. Metode rancang bangun bilik sterilisasi "White Box" menggunakan metode kualitatif dengan tahap kegiatan meliputi: (1) Tahap persiapan yaitu rancangan fungsional dan rancangan struktural"White Box"; (2) Tahap pelaksanaan yaitu analisa penggunaan alat dan bahan dan Pembuatan bilik sterilisasi; (3) Tahap Pasca Pelaksanaan yaitu pengujian bilik sterilisasi antara lain uji fungsi dan uji kinerja bilik sterilisasi. Muatan kegiatan rancang bangun bilik sterilisasi "White Box" dilakukan dengan cara menguji coba berbagai variasi prototipe, meliputi variasi dimensi pipa penyaluran, bentuk pipa penyalur, variasi sistem perpipaan. Proses validasi yang dilakukan meliputi: (1) Diamater pipa terhadap semburan embun humidifier; (2) Bentuk pipa penyalur terhadap semburan embun humidifier; dan (3) Panjang lintasan pipa terhadap semburan embun humidifier.

scholarly journals Research on Real Working Condition Simulation and Performance Test of Wind Power Main Bearing Based on Test Bench

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Guodong Zhai ◽  
Xujie Qin ◽  
Xing Yang
Keyword(s):  
Wind Power ◽  
Performance Test ◽  
Test Bench ◽  
Test Results ◽  
Main Bearing ◽  
Loading System ◽  
Modeling Software ◽  
And Performance ◽  
Drive And Control ◽  
And Control

As a renewable energy source, wind energy has received more and more attention, and the wind power industry has also been advocated and developed by countries all over the world. In the production and use of wind turbines, the design and manufacturing technology of wind turbine bearings is very important. In order to ensure the reliable operation of the wind power main bearing after installation and realize the longest life of it, this paper designs a bearing test bench that can test the performance of the wind power main bearing. It can analyze the temperature, displacement, load, and moment of the key parts of the 5 MW wind power main shaft bearing. The solid modeling of the experimental platform was carried out using the 3D modeling software SolidWorks. Hydraulic loading system and test monitoring system are designed to realize the drive and control of the test bench. Through the established mathematical model, the central load of the hub is converted into the axial cylinder load and the radial cylinder load of the test bench to simulate the actual working conditions of the tested bearing. The test results show that the test bench meets various loading requirements and can reliably complete the task of testing wind power main bearings.

scholarly journals Development and Performance Test Results of 50kA Vapor-cooled Current Lead for ITER.

1998 ◽  
Vol 33 (8) ◽  
pp. 549-560 ◽  
Author(s):  
Makoto SUGIMOTO ◽  
Takaaki ISONO ◽  
Kazuya HAMADA ◽  
Katsumi KAWANO ◽  
Norikiyo KOIZUMI ◽  
...  
Keyword(s):  
Performance Test ◽  
Current Lead ◽  
Test Results ◽  
And Performance

UPGRADES OF PROJECTING CHARGE FOR APFSDS-T-TP AMMUNITION FIRED WITH 120 MM GUN OF LEOPARD 2 TANK

2018 ◽  
Vol 146 (2) ◽  
pp. 107-117
Author(s):  
Tadeusz Kuśnierz
Keyword(s):  
Performance Test ◽  
Armed Forces ◽  
Development Work ◽  
Home Production ◽  
Research Development ◽  
Test Results ◽  
Random Vibrations ◽  
Certification Tests ◽  
And Performance ◽  
Charge Design

APFSDS-T-TP ammunition of home production for 120 mm gun of LEOPARD 2 tank, being on the inventory of the Polish Armed Forces, has not passed the requirements of NO-13-A513 Defence Standard at certification tests against the random vibrations occurring at its tactical transportation inside the tank. Performed tests have indicated that the fulfilment of Standard requirements can be achieved by upgrading the igniting system what also makes the projecting charge design of APFSDS-T-TP ammunition change. The paper describes the research-development work on the upgrading of the igniting system for the cartridges used in 120 mm gun of LEOPARD 2 tank. The designs of the existing and upgraded igniting systems are presented both with the designing changes of projecting charges and ammunition ballistic and performance test results.

scholarly journals How Can IoT Applicable to Practice Gross Motor Skill Through Hopscotch Game?

2020 ◽  
Vol 4 (3) ◽  
pp. 584-590
Author(s):  
Irvan Naufali Rahmanto ◽  
Novian Anggis Suwastika ◽  
Rahmat Yasirandi
Keyword(s):  
Motor Development ◽  
Performance Test ◽  
Physical Growth ◽  
Fine Motor ◽  
Test Results ◽  
Gross Motor ◽  
Muscle Strengthening ◽  
Assessment Activity ◽  
And Performance ◽  
Foot Position

Motor development is the result of changes caused by physical growth, muscle strengthening, and the ability to interact with the environment. There are two types of motor development, namely gross motor and fine motor. The best age for a child for motor development is 0 to 8 years. At the age of 4 to 6 years mostly of children's gross motor activities related to balance and coordination. Child’s development of gross motor can be achieved by stimulating using games. Hopscotch is type of game that implements balance and coordination skills that support the development of gross motor skills. In Indonesia, children aged 4 years to 6 years have started to enter the Early Childhood Education and Kindergarten level. When the child is at school, parents cannot provide motor stimulation and must wait for the child's motor development reports submitted by the teachers. In this study we implemented system to stimulate the development of gross motor balance and coordination in children aged 4 to 6 years using hopscotch game integrated with Internet of Things (IoT) technology. IoT provides the ability to read, record, and evaluate children's activities and publish their results online for parents to access. This system is evaluated based on the system's functionality and performance parameters. From the test results found that the functionality of the system runs 100% by the specified function. The system performance test results from the sensor readings are under 1 second and the accuracy of the assessment activity of the first test variation of the foot position in the middle of 68.75%, and the foot position at the edge of 81.25% with the program delay setting from the node to the IoT platform an average of 1 second.

Sign in / Sign up

Export Citation Format

Share Document