Extractive Capacity of CO2 in Oil Saturated Porous Media

2012 ◽  
Vol 524-527 ◽  
pp. 1807-1810
Author(s):  
Hao Chen ◽  
Sheng Lai Yang ◽  
Fang Fang Li ◽  
San Bo Lv ◽  
Zhi Lin Wang
Keyword(s):  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Oil Production ◽  
Supercritical Condition ◽  
Experimental Results ◽  
Water Flooding ◽  
Saturated Porous Media ◽  
Reservoir Conditions

CO2 flooding process has been a proven valuable tertiary enhanced oil recovery (EOR) technique. In this paper, experiment on extractive capacity of CO2 in oil saturated porous media was conducted under reservoir conditions. The main objectives of the study are to evaluate extractive capacity of CO2 in oil saturated natural cores and improve understanding of the CO2 flooding mechanisms, especially in porous media conditions. Experimental results indicated that oil production decreases while GOR increases with extractive time increases. the changes of the color and state of the production oil shows that oil component changes from light to heavy as extractive time increases. In addition, no oil was produced by water flooding after extractive experiment. Based on the experimental results and phenomena, the main conclusion drawn from this study is that under supercritical condition, CO2 has very powerful extractive capacity. And the application of CO2 flooding is recommended for enhancing oil recovery.

scholarly journals Experimental study of the supercritical CO 2 diffusion coefficient in porous media under reservoir conditions

2019 ◽  
Vol 6 (6) ◽  
pp. 181902 ◽  
Author(s):  
Junchen Lv ◽  
Yuan Chi ◽  
Changzhong Zhao ◽  
Yi Zhang ◽  
Hailin Mu
Keyword(s):  
Porous Media ◽  
Diffusion Coefficient ◽  
Oil Recovery ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Elevated Pressure ◽  
Experimental Results ◽  
Saturated Porous Media ◽  
Reservoir Conditions ◽  
The Impact

Reliable measurement of the CO 2 diffusion coefficient in consolidated oil-saturated porous media is critical for the design and performance of CO 2 -enhanced oil recovery (EOR) and carbon capture and storage (CCS) projects. A thorough experimental investigation of the supercritical CO 2 diffusion in n -decane-saturated Berea cores with permeabilities of 50 and 100 mD was conducted in this study at elevated pressure (10–25 MPa) and temperature (333.15–373.15 K), which simulated actual reservoir conditions. The supercritical CO 2 diffusion coefficients in the Berea cores were calculated by a model appropriate for diffusion in porous media based on Fick's Law. The results show that the supercritical CO 2 diffusion coefficient increases as the pressure, temperature and permeability increase. The supercritical CO 2 diffusion coefficient first increases slowly at 10 MPa and then grows significantly with increasing pressure. The impact of the pressure decreases at elevated temperature. The effect of permeability remains steady despite the temperature change during the experiments. The effect of gas state and porous media on the supercritical CO 2 diffusion coefficient was further discussed by comparing the results of this study with previous study. Based on the experimental results, an empirical correlation for supercritical CO 2 diffusion coefficient in n -decane-saturated porous media was developed. The experimental results contribute to the study of supercritical CO 2 diffusion in compact porous media.

scholarly journals Experimental study and numerical modeling for enhancing oil recovery from carbonate reservoirs by nanoparticle flooding

2019 ◽  
Vol 74 ◽  
pp. 5 ◽  
Author(s):  
Mehrdad Sepehri ◽  
Babak Moradi ◽  
Abolghasem Emamzadeh ◽  
Amir H. Mohammadi
Keyword(s):  
Numerical Modeling ◽  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Recovery Process ◽  
Water Flooding ◽  
Wettability Alteration ◽  
Sensitivity Analyses ◽  
Two Phase ◽  
Fluid Properties

Nowadays, nanotechnology has become a very attractive subject in Enhanced Oil Recovery (EOR) researches. In the current study, a carbonate system has been selected and first the effects of nanoparticles on the rock and fluid properties have been experimentally investigated and then the simulation and numerical modeling of the nanofluid injection for enhanced oil recovery process have been studied. After nanofluid treatment, experimental results have shown wettability alteration. A two-phase flow mathematical model and a numerical simulator considering wettability alteration have been developed. The numerical simulation results show that wettability alteration from oil-wet to water-wet due to presence of nanoparticles can lead to 8–10% increase in recovery factor in comparison with normal water flooding. Different sensitivity analyses and injection scenarios have been considered and assessed. Using numerical modeling, wettability alteration process and formation damage caused by entrainment and entrapment of nanoparticles in porous media have been proved. Finally, the net rate of nanoparticles’ loss in porous media has been investigated.

scholarly journals A Pore-Scale Investigation of Residual Oil Distributions and Enhanced Oil Recovery Methods

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3732 ◽  
Author(s):  
Yaohao Guo ◽  
Lei Zhang ◽  
Guangpu Zhu ◽  
Jun Yao ◽  
Hai Sun ◽  
...  
Keyword(s):  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Polymer Flooding ◽  
Water Flooding ◽  
Scale Model ◽  
Pore Scale ◽  
Residual Oil ◽  
Sweep Efficiency ◽  
Significant Difference

Water flooding is an economic method commonly used in secondary recovery, but a large quantity of crude oil is still trapped in reservoirs after water flooding. A deep understanding of the distribution of residual oil is essential for the subsequent development of water flooding. In this study, a pore-scale model is developed to study the formation process and distribution characteristics of residual oil. The Navier–Stokes equation coupled with a phase field method is employed to describe the flooding process and track the interface of fluids. The results show a significant difference in residual oil distribution at different wetting conditions. The difference is also reflected in the oil recovery and water cut curves. Much more oil is displaced in water-wet porous media than oil-wet porous media after water breakthrough. Furthermore, enhanced oil recovery (EOR) mechanisms of both surfactant and polymer flooding are studied, and the effect of operation times for different EOR methods are analyzed. The surfactant flooding not only improves oil displacement efficiency, but also increases microscale sweep efficiency by reducing the entry pressure of micropores. Polymer weakens the effect of capillary force by increasing the viscous force, which leads to an improvement in sweep efficiency. The injection time of the surfactant has an important impact on the field development due to the formation of predominant pathway, but the EOR effect of polymer flooding does not have a similar correlation with the operation times. Results from this study can provide theoretical guidance for the appropriate design of EOR methods such as the application of surfactant and polymer flooding.

scholarly journals Mathematical Model for Water Flooding and HPAM Polymer Flooding in Enhanced Oil Recovery

2021 ◽  
Vol 21 (1) ◽  
pp. 124
Author(s):  
Ahmad Tawfiequrahman Yuliansyah ◽  
Bardi Murachman ◽  
Suryo Purwono
Keyword(s):  
Mathematical Model ◽  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Coming Out ◽  
Polymer Flooding ◽  
Flow In Porous Media ◽  
Water Flooding ◽  
Silica Sand ◽  
Model Parameters

The need for energy, especially the petroleum-based one, is steadily increasing along with population growth and technological advancement. Meanwhile, oil exploitation from oil reservoirs using primary and secondary techniques can only obtain about 30%-50 % out of the original oil in place. Enhanced Oil Recovery (EOR) is a method for increasing oil recovery from a reservoir by injecting materials that are not found in the reservoir, such as surfactant, polymer, etc. This research aims to develop a mathematical model representing two-phase flow through porous media in the EOR process. This model was extended from mass balance and fluid flow in porous media equations. The reliability of the model was then validated by water flooding and polymer flooding experiment. A porous media, constituted by a silica sand pack, was saturated with 2 % brine and sequentially flooded with HPAM polymer solution at various concentrations (5,000-15,000 ppm). The volume of the oil coming out from the media at any time intervals was measured. Validation of the model was carried out by optimizing the model parameters to obtain the best curve-fitting on the plot of the percentage of cumulative recovered oil against time. The results showed that the proposed mathematical model was reliable enough to express both water and polymer-flooding processes.

Core-Based Evaluation of Associative Polymers as Enhanced Oil Recovery Agents in Oil-Wet Formations

2018 ◽  
Vol 140 (3) ◽  
Author(s):  
Reza Askarinezhad ◽  
Dimitrios Georgios Hatzignatiou ◽  
Arne Stavland
Keyword(s):  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Mobility ◽  
Oil Production ◽  
Mobility Control ◽  
Polymer Injection ◽  
Remaining Oil ◽  
Associative Polymer ◽  
Mobility Reduction

Linear coreflood experiments are performed at 60 °C to test the effectiveness of a low molecular weight associative polymer as a displacing agent, and its ability to enhance oil recovery on chemically treated oil-wet Berea cores. Polymer injection tests revealed high mobility reductions (resistance factor (RF)) and reduced remaining oil saturations. Results obtained suggest that the incremental oil production is due to the high mobility reduction, as reported previously for water-wet porous media. The reduced remaining oil saturation is a function of the injected associative polymer treatment volume. Polymer mobility reduction is highly affected by the injected polymer velocity; this reduction is observed to be more significant at the lower velocity spectrum. Therefore, the established incremental oil production, even at reduced polymer injection rates (lower capillary numbers), could be explained by the increased mobility reduction. A correlation for the velocity-dependent mobility reduction is developed. Results are in agreement with previously reported ones in water-wet media and related to the enhanced oil recovery (EOR) nature of the injected associative polymer as opposed to the traditional mobility control of other polymer types. During injection, a column of oil-polymer emulsion is formed gradually in the separator causing operational difficulties and introducing produced fluid measurement (and core fluid saturations) uncertainties. Produced oil/water emulsion polymer volume content is used to correct overestimated oil production attributed to measurement uncertainties. Real-time resistivity measurements could also be a valuable tool for both fluids saturation monitoring and improved core fluids saturation evaluation in flooded porous media.

A MATHEMATICAL MODEL OF MICROBIAL ENHANCED OIL RECOVERY IN POROUS MEDIA

2017 ◽  
Vol 8 (4) ◽  
pp. 263-272
Author(s):  
Jianlong Xiu ◽  
Tianyuan Wang ◽  
Ying Guo ◽  
Qingfeng Cui ◽  
Lixin Huang ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Porous Media ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Microbial Enhanced Oil Recovery

Enhanced Oil Recovery Application of Nanoparticles in Niger Delta Water-Wet Reservoir Rock

2021 ◽  
Author(s):  
Tinuola Udoh
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Niger Delta ◽  
Oil Production ◽  
Reservoir Rock ◽  
Core Flooding ◽  
Core Samples ◽  
Recovery Potential ◽  
Secondary Formation ◽  
Injection Modes

Abstract In this paper, the enhanced oil recovery potential of the application of nanoparticles in Niger Delta water-wet reservoir rock was investigated. Core flooding experiments were conducted on the sandstone core samples at 25 °C with the applications of nanoparticles in secondary and tertiary injection modes. The oil production during flooding was used to evaluate the enhanced oil recovery potential of the nanoparticles in the reservoir rock. The results of the study showed that the application of nanoparticles in tertiary mode after the secondary formation brine flooding increased oil production by 16.19% OIIP. Also, a comparison between the oil recoveries from secondary formation brine and nanoparticles flooding showed that higher oil recovery of 81% OIIP was made with secondary nanoparticles flooding against 57% OIIP made with formation brine flooding. Finally, better oil recovery of 7.67% OIIP was achieved with secondary application of nanoparticles relative to the tertiary application of formation brine and nanoparticles flooding. The results of this study are significant for the design of the application of nanoparticles in Niger Delta reservoirs.

Sign in / Sign up

Export Citation Format

Share Document