Optimization of the Ultrasonic Extraction of Gypenoside III from Gynostemma pentaphyllum by Response Surface Methodology

2012 ◽  
Vol 550-553 ◽  
pp. 1866-1870
Author(s):  
Xiao Dan Tang ◽  
Hai Yang Hang ◽  
Shao Yan Wang ◽  
Jing Xiang Cong
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Gynostemma Pentaphyllum ◽  
Bioactive Component ◽  
Yield Value ◽  
Ultrasonic Time

Gypenosides III is a major bioactive component which is rich in Gynostemma pentaphyllum. For better utilization of the native resource, response surface methodology was used to optimize the extraction conditions of gypenosides III from G. pentaphyllum. The effects of three independent variables on the extraction yield of gypenosides III were investigated and the optimal conditions were evaluated by means of Box-Behnken design. The optimal conditions are as follows: ratio of ethanol to raw material 25, extraction temperature 58°C and ultrasonic time 25min. Under these conditions, the yield of gypenoside III is 1.216±0.05%, which is agreed closely with the predicted yield value.

Optimization of Crude Polysaccharides Extraction from Plantago ovata Forsk Seed by Response Surface Methodology

2020 ◽  
Vol 16 (3) ◽  
pp. 354-363
Author(s):  
Ehsan Sadeghi ◽  
Reza Mohammadi ◽  
Mohammad H. Shirgardoun ◽  
Fatemeh Askari ◽  
Masoumeh Taghizadeh ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Food Packaging ◽  
Polynomial Equation ◽  
Edible Films ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Plantago Ovata

Background: Plantago ovata Forsk (Psyllium seed) is an annual plant of plantago genus. This plant widely grows in India and Iran. The Psyllium seed contains mucilage, protein, sugar, fat and tannins. Seed’s husk is a known source to extract hydrocolloid. Objective: The aim of this study was to optimize gum extraction from the Psyllium seed. Methods: The response surface methodology (RSM) was used to estimate the effect of independent variables on the extraction yield of Psyllium gum. The obtained experimental data were fitted to a second- order polynomial equation using multiple regression analysis and analyzed by appropriate statistical methods. A central composite design (CCD) was used for experimental design and analysis of the results to obtain the best possible combination of extraction temperature (X1= 60-80°C), extraction time (X2= 1-3 h), and the ratio of water to raw material (X3= 30-70%) for the maximum gum extraction. Results: Optimum extraction conditions were extraction temperature of 79°C, extraction time of 2.5 h, and the ratio of water to the raw material of 57%. The experimental extraction yield under optimal conditions was found to be 9 ± 0.25%, which was in agreement with the predicted value of 9.4%. Conclusion: This study showed that Psyllium gum can be used as a hydrocolloid source for pharmaceutical and food industry such as edible films for food packaging.

Ultrasonic Extraction of Phenolics from Longan Seed by Response Surface Methodology

2013 ◽  
Vol 634-638 ◽  
pp. 1302-1308
Author(s):  
Li Jing Lin ◽  
Xiao Bing Huang ◽  
Ji Hua Li ◽  
Xu Ran ◽  
Yong Fu Tang
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Yield ◽  
Methanol Concentration ◽  
Ultrasonic Extraction ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Major Parameter ◽  
Longan Seed

A Box-Behnken experimental design and response surface methodology (RSM) was employed to optimize the parameters of ultrasonic extraction of phenolics from longan seed based on the single-factor experiments. The effects of extraction temperature, methanol concentration and extraction time on the extraction yield of phenolics from longan seed were investigated. The major parameter influencing the extraction was the extraction temperature. In this experiment, the maximal extraction yield of phenolics was obtained with 5.931 ± 0.016% (n = 3) at extraction temperature 82°C, methanol concentration 50% and extraction time 41 min. Under optimal conditions, the activity predicted by the model agreed well with experimental data.

scholarly journals Homogenate Extraction of Crocins from Saffron Optimized by Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Yingpeng Tong ◽  
Yu Jiang ◽  
Dan Guo ◽  
Yongqiu Yan ◽  
Shiping Jiang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Process Conditions ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Voltage ◽  
Homogenate Extraction

Saffron, which has many kinds of biological activities, has been widely used in medicine, cosmetics, food, and other fields of health promotion industries. Crocins are the main component of saffron (Crocus sativus L.). At present, most of the extraction methods for crocins require long time or special instruments to complete the process and some of them are not suitable for industrial production at present. In this article, homogenate extraction technology which is a convenient and efficient method was developed for crocins extraction from saffron. Firstly, the influences of extraction voltage, extraction time, ethanol concentration, and temperature on crocins yield were studied by single factor experiments; and then response surface methodology (RSM) was used to optimize levels of four variables based on the result of single factor experiments. Results showed that the optimum extraction process conditions for crocins were as follows: extraction voltage, 110 V; ethanol concentration, 70%; extraction temperature, 57°C; and extraction time, 40 s. Based on these conditions, the extraction yield of crocins can reach 22.76% which is higher than ultrasonic extraction method. Therefore, homogenate extraction is an effective way to extract crocins from saffron with higher extraction yield and shorter extraction time.

scholarly journals Optimization of Supercritical Carbon Dioxide Extraction of Quercus infectoria Oil

2015 ◽  
Vol 74 (7) ◽  
Author(s):  
Liza Md Salleh ◽  
Stashia ELeaness Rosland Abel ◽  
Gholamreza Zahedi ◽  
Russly Abd Rahman ◽  
Hasmida Mohd Nasir ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Goodness Of Fit ◽  
Maximum Yield ◽  
Extraction Yield ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Predicted Values ◽  
Artificial Neural Network Ann ◽  
Quercus Infectoria

This current study focuses on the modelling and optimization of supercritical fluid extraction of Quercus infectoria galls oil. In this case, response surface methodology (RSM) and artificial neural network (ANN) were applied for the modelling and prediction of extraction yield of galls oil. A 17-run Box-Behnken Design (BBD) was employed to statistically optimize the process parameters of SC-CO2 extraction of Quercus infectoria galls at a condition as follows: pressure (5000, 6000, 7000 Psi), temperature (40, 50, 60°C) and extraction time (30, 45, 60 min). The maximum yield of the extracted oil is1.12 % and the optimum conditions are at an extraction pressure of 5574 Psi; extraction temperature of 75°C and extraction time of 54 min. Under the optimal conditions, the experimental results agree with the predicted values obtained through analysis of variance (ANOVA). This indicates a successful response surface methodology and highly satisfactory goodness of fit of the model used. The analysis of experimental design for process optimization results demonstrates that temperature and extraction time are the main parameters that influence the oil extraction of Quercus infectoria.

scholarly journals OPTIMIZATION CONDITION EXTRACTION USED ENZYME WITH RESPONSE SURFACE METHODOLOGY TO EXTRACT ROSELLE PETALS (Hibiscus sabdariffa L.)

2019 ◽  
Vol 9 (2) ◽  
Author(s):  
Mardiah Mardiah ◽  
Rima Nidaul Hasanah ◽  
Noli Novidahlia ◽  
A.E. Zainal Hasan
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Enzyme Concentration ◽  
Raw Material ◽  
Extraction Time ◽  
Anthocyanin Content ◽  
Extraction Temperature ◽  
Hibiscus Sabdariffa ◽  
Cellulase Enzymes ◽  
Yield Level

Roselle petals can be made into extracts as a source of raw material for food products and other products. Previous research states that the use of pectinase and cellulase enzymes can increase the yield including the anthocyanin content. This study aims to optimize the extraction conditions of roselle flower petals  (Hibiscus sabdariffa L.) using pectinase and cellulase enzymes by using Response Surface Methodology (RSM). The treatment conditions were using pectinase and cellulase enzyme (1: 1) with concentrations in the range between 500-1500 ppm, extraction temperature between 35-65 oC and extraction time between 30-90 minutes. Analysis of the best treatment was carried out on the yield level, anthocyanin content and total dissolved solids tested using central composite design, obtained R2 values for the three responses of 0.6. The results showed that based on the surface response, the optimum conditions of the best  extraction of the rosella at the addition of enzyme concentration of 1000 ppm, extraction temperature of 50 oC and extraction time of 10 minutes. In this condition, the yield of dried extracts of rosella was 84,20%, anthocyanins content 479,70 mg/L and total soluble solid 2,13 oBrix.

scholarly journals Optimization of Extraction Process for Antidiabetic and Antioxidant Activities of Kursi Wufarikun Ziyabit Using Response Surface Methodology and Quantitative Analysis of Main Components

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Salamet Edirs ◽  
Ablajan Turak ◽  
Sodik Numonov ◽  
Xuelei Xin ◽  
Haji Akber Aisa
Keyword(s):  
Response Surface Methodology ◽  
Quantitative Analysis ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Inhibition Rate ◽  
Main Components ◽  
Ptp 1B

By using extraction yield, total polyphenolic content, antidiabetic activities (PTP-1B and α-glycosidase), and antioxidant activity (ABTS and DPPH) as indicated markers, the extraction conditions of the prescription Kursi Wufarikun Ziyabit (KWZ) were optimized by response surface methodology (RSM). Independent variables were ethanol concentration, extraction temperature, solid-to-solvent ratio, and extraction time. The result of RSM analysis showed that the four variables investigated have a significant effect (p<0.05) for Y1, Y2, Y3, Y4, and Y5 with R2 value of 0.9120, 0.9793, 0.9076, 0.9125, and 0.9709, respectively. Optimal conditions for the highest extraction yield of 39.28%, PTP-1B inhibition rate of 86.21%, α-glycosidase enzymes inhibition rate of 96.56%, and ABTS inhibition rate of 77.38% were derived at ethanol concentration 50.11%, extraction temperature 72.06°C, solid-to-solvent ratio 1 : 22.73 g/mL, and extraction time 2.93 h. On the basis of total polyphenol content of 48.44% in this optimal condition, the quantitative analysis of effective part of KWZ was characterized via UPLC method, 12 main components were identified by standard compounds, and all of them have shown good regression within the test ranges and the total content of them was 11.18%.

scholarly journals OPTIMIZATION OF EXTRACTION PARAMETERS FOR TOTAL FLAVONOIDS FROM GARDENIA GUMMIFERA GUM RESIN BY RESPONSE SURFACE METHODOLOGY

2016 ◽  
Vol 8 (11) ◽  
pp. 64 ◽  
Author(s):  
Snehal B. Bhandare ◽  
Kirti S. Laddha
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Close Agreement ◽  
Extraction Time ◽  
Total Flavonoids ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Single Factor ◽  
Solvent Concentration ◽  
Extraction Parameters

Objective: To optimize the extraction parameters for determining the highest yield of Total Flavonoids from Gardenia gummifera gum resin.Methods: In the present study, response surface methodology (RSM) with three level Box Behenken design (BBD) was performed to optimize extraction parameters for total flavonoids. Solvent concentration(A), extraction time (B) and extraction temperature(C) were considered for single factor experiment.Results: The highest flavonoid concentration was obtained with acetone 45.00% v/v, time 101.46 min, temperature 41.57 °C. The average experimental TFC under optimal conditions was 161.14 mg/g which was in close agreement with the predicted value of 163.42 mg/g.Conclusion: RSM-BBD is successfully applied in optimizing extraction conditions for extraction of total flavonoids from G. gummifera gum resin.

Hydrotropic Extraction of Xanthones from Mangosteen Pericarp

2014 ◽  
Vol 984-985 ◽  
pp. 372-376 ◽  
Author(s):  
D. Gnana Prakash ◽  
Pradeep Panneerselvam ◽  
Sai Madhusudanan ◽  
V. Aditya
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Sodium Salicylate ◽  
Cost Effective ◽  
Separation Process ◽  
Extraction Technique ◽  
Solid Loading ◽  
Extraction Temperature ◽  
Optimal Conditions

A novel separation process for extraction of xanthones from mangosteen pericarp was investigated using aqueous hydrotrope solution. The hydrotropes sodium salicylate was used for the extraction. The effects of factors such as hydrotrope concentration, extraction temperature and solid loading were investigated by using Response Surface Methodology (RSM). The optimal conditions to obtain the highest yield of xanthones were 2M sodium salicylate, extraction temperature of 40°C and 3% solid loading. This hydrotropic extraction technique is simple and cost effective for the separation of bioactive compounds.Key words: Xanthones; Hydrotropes; Hydrotropic extraction

Optimization of Extraction Process of Lycopene from Watermelon (Citrullus lanatus) by Response Surface Methodology

2011 ◽  
Vol 140 ◽  
pp. 385-393 ◽  
Author(s):  
Xian Feng Shi ◽  
Yuan Xu ◽  
Yu Hua Li ◽  
Hong Xia Zeng ◽  
Yu Hong Sun
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Citrullus Lanatus ◽  
Extraction Process ◽  
Quadratic Equation ◽  
Raw Material ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Extraction Solvent

The extraction processing of lycopene from watermelon was investigated in this paper. Based on single factor experiments, response surface methodology (RSM) was adopted to study the key parameters such as number of extraction, extraction temperature, extraction time in order to increase extraction rate of lycopene. A second order quadratic equation was established and the applicability of model and interaction involved factors on predicting the lycopene extracting content was verified. The results indicated that the optimum extraction conditions were hexane (containing 2% dichloromethane) as extraction solvent, ratio of solvent to raw material of 3:1 (mL/g), number of extraction of 2, extraction time of 1.9 h and extraction temperature of 29.8°C. Under these conditions the extracting content of lycopene was 14.71±0.22 mg/kg, which is well in agreement with value predicted by the model.

Chemical Demulsification-Ultrasonic Recycle Oil from Oil-Based Drilling Fluid Using Response Surface Methodology

2014 ◽  
Vol 955-959 ◽  
pp. 2653-2657 ◽  
Author(s):  
Mi Jia Zhu ◽  
Hai Jun Liu ◽  
Jun Yao ◽  
Qing Hua Luo
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Oil Content ◽  
Heating Temperature ◽  
Removal Rate ◽  
Drilling Fluid ◽  
Oil Removal ◽  
Optimal Conditions ◽  
Box Behnken Design ◽  
Ultrasonic Time

The abandoned oil-based drilling fluid is a kind of water-in-oil system with high oil content, which has a significant recovery value. The effects of demulsifier dosage, heating temperature, ultrasonic time and centrifuge speed on the oil recycle were investigated in the chemical demulsification-ultrasonic treatment of oil-based drilling fluid. From the results of the experiment, BSF-L62 was a suitable reagent with the highest oil removal rate among the selected demulsifiers. The main influencing factors were optimized using the Response Surface Methodology based on Box-Behnken design. The oil removal rate was up to 76.9% under the optimal conditions of demulsifier dosage of 250 mg/L, heating temperature of 70 °C, ultrasonic time of 12.5 min and centrifuge speed of 7000 r/min.

Sign in / Sign up

Export Citation Format

Share Document