High Cr(VI) Adsorption Performance of Coal-Based Activated Carbon in Aqueous Solution

2013 ◽  
Vol 798-799 ◽  
pp. 1123-1127
Author(s):  
Hua Lei Zhou ◽  
Qiong Qiong Zhu ◽  
Dong Hua Huang
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Pore Structure ◽  
Ph Value ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation ◽  
Transmission Electron ◽  
Mesoporous Adsorbent ◽  
Initial Ph

The activated carbon with high surface area was prepared by KOH activation from anthracite and used as adsorbent for removal of Cr (VI) from aqueous solution. The pore structure and surface properties were characterized by N2 adsorption at 77K, transmission electron microscope (TEM) and Fourier transform infrared spectroscopy ( FTIR). Effect of pH and isotherms at different temperature were investigated. Results show that the prepared carbon is a microporous-and mesoporous-adsorbent with developed pore structure and abundant surface oxygen-containing groups. PH value of the solution plays key function on the adsorption. The chemical adsorption dominates the adsorption process. The activated carbon exhibits much higher Cr adsorption capacity than the commercial activated carbon at initial pH of ~3. The equilibrium adsorption data are fitted by both Freundlich model and Langmuir model well.

scholarly journals Synthesis of activated carbon from biowaste of fir bark for methylene blue removal

2019 ◽  
Vol 6 (9) ◽  
pp. 190523 ◽  
Author(s):  
Lu Luo ◽  
Xi Wu ◽  
Zeliang Li ◽  
Yalan Zhou ◽  
Tingting Chen ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Nonlinear Models ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Raw Material ◽  
Maximum Adsorption Capacity ◽  
Koh Activation ◽  
Mb Adsorption

Activated carbon (AC) was successfully prepared from low-cost forestry fir bark (FB) waste using KOH activation method. Morphology and texture properties of ACFB were studied by scanning and high-resolution transmission electron microscopies (SEM and HRTEM), respectively. The resulting fir bark-based activated carbon (ACFB) demonstrated high surface area (1552 m 2 g −1 ) and pore volume (0.84 cm 3 g −1 ), both of which reflect excellent potential adsorption properties of ACFB towards methylene blue (MB). The effect of various factors, such as pH, initial concentration, adsorbent content as well as adsorption duration, was studied individually. Adsorption isotherms of MB were fitted using all three nonlinear models (Freundlich, Langmuir and Tempkin). The best fitting of MB adsorption results was obtained using Freundlich and Temkin. Experimental results showed that kinetics of MB adsorption by our ACFB adsorbent followed pseudo-second-order model. The maximum adsorption capacity obtained was 330 mg g −1 , which indicated that FB is an excellent raw material for low-cost production of AC suitable for cationic dye removal.

scholarly journals Structural Flexibility in Activated Carbon Materials Prepared under Harsh Activation Conditions

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1988 ◽  
Author(s):  
Fabiano Gomes Ferreira de Paula ◽  
Ignacio Campello-Gómez ◽  
Paulo Fernando Ribeiro Ortega ◽  
Francisco Rodríguez-Reinoso ◽  
Manuel Martínez-Escandell ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Structural Changes ◽  
Organic Molecules ◽  
Carbon Materials ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation ◽  
3D Network ◽  
Activation Conditions

Although traditionally high-surface area carbon materials have been considered as rigid structures with a disordered three dimensional (3D) network of graphite microdomains associated with a limited electrical conductivity (highly depending on the porous structure and surface chemistry), here we show for the first time that this is not the case for activated carbon materials prepared using harsh activation conditions (e.g., KOH activation). In these specific samples a clear structural re-orientation can be observed upon adsorption of different organic molecules, the structural changes giving rise to important changes in the electrical resistivity of the material. Whereas short chain hydrocarbons and their derivatives give rise to an increased resistivity, the contrary occurs for longer-chain hydrocarbons and/or alcohols. The high sensitivity of these high-surface area carbon materials towards these organic molecules opens the gate towards their application for sensing devices.

Magnetic Fe3O4@C nanoparticles as adsorbents for removal of amoxicillin from aqueous solution

2013 ◽  
Vol 69 (1) ◽  
pp. 147-155 ◽  
Author(s):  
Babak Kakavandi ◽  
Ali Esrafili ◽  
Anoushiravan Mohseni-Bandpi ◽  
Ahmad Jonidi Jafari ◽  
Roshanak Rezaei Kalantary
Keyword(s):  
Electron Microscopy ◽  
Activated Carbon ◽  
Kinetic Models ◽  
High Surface ◽  
High Surface Area ◽  
Order Kinetic ◽  
Magnetic Composites ◽  
Factors Affecting ◽  
Transmission Electron ◽  
Pseudo Second Order

In the present study, powder activated carbon (PAC) combined with Fe3O4 magnetite nanoparticles (MNPs) were used for the preparation of magnetic composites (MNPs-PAC), which was used as an adsorbent for amoxicillin (AMX) removal. The properties of magnetic activated carbon were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Brunaeur, Emmett and Teller and vibrating sample magnetometer. The operational factors affecting adsorption such as pH, contact time, adsorbent dosage, initial AMX concentration and temperature were studied in detail. The high surface area and saturation magnetization for the synthesized adsorbent were found to be 671.2 m2/g and 6.94 emu/g, respectively. The equilibrium time of the adsorption process was 90 min. Studies of adsorption equilibrium and kinetic models revealed that the adsorption of AMX onto MNPs-PAC followed Freundlich and Langmuir isotherms and pseudo-second-order kinetic models. The calculated values of the thermodynamic parameters, such as ΔG°, ΔH° and ΔS° demonstrated that the AMX adsorption was endothermic and spontaneous in nature. It could be concluded that MNPs-PAC have a great potential for antibiotic removal from aquatic media.

Efficient Removal of Cd2+ by the Mesoporous Silica Functionalized by APTES

2013 ◽  
Vol 726-731 ◽  
pp. 2409-2412
Author(s):  
Xiao Feng Cai ◽  
Kang Wei Ji ◽  
Wan Hao Wu ◽  
Jie Hou ◽  
Shi You Hao
Keyword(s):  
Aqueous Solution ◽  
Mesoporous Silica ◽  
Ph Value ◽  
High Surface ◽  
High Surface Area ◽  
Efficient Removal ◽  
Structure Directing Agent ◽  
Functionalized Mesoporous Silica ◽  
Adsorption Desorption ◽  
Large Pore Size

Amino-functionalized mesoporous silica (AFMS) with high amino loading, high surface area, and large pore size was synthesized using the anionic surfactant N-lauroylsarcosine sodium (Sar-Na) as template and 3-aminopropyltriethoxysilane (APTES) as co-structure directing agent (CSDA). The synthesized AFMS was characterized by N2adsorption-desorption, TEM and elemental analyzer. The results of the removal of Cd2+from aqueous solution showed that the pH value of aqueous solution affected the removal efficiency of Cd2+greatly, and that unary adsorption isotherm of Cd2+on the AFMS was well described by the Sips isotherm model, in which the adsorption capacity was 2.43 mmol/g for Cd2+, much higher than the literature data.

scholarly journals Preparation and CO2Sorption of a High Surface Area Activated Carbon Obtained from the KOH Activation of Finger Citron Residue

2012 ◽  
Vol 30 (2) ◽  
pp. 183-191 ◽  
Author(s):  
Wei Dai ◽  
Yuchen Liu ◽  
Wei Su ◽  
Gengshen Hu ◽  
Gang Deng ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation

Nitrogen and Water Sorption Properties of Ethyl-Substituted Silica Aerogels and Xerogels

1994 ◽  
Vol 371 ◽  
Author(s):  
Chunling Liu ◽  
Sridhar Komarneni
Keyword(s):  
Pore Structure ◽  
Surface Area ◽  
Water Sorption ◽  
Ph Value ◽  
High Surface ◽  
High Surface Area ◽  
Silica Aerogels ◽  
Modified Silica ◽  
Surface Areas ◽  
Water Sorption Properties

AbstractHigh surface area ethyltrimethoxysilane (ETMS) modified silica aerogels and xerogels were synthesized by cohydrolyzing the mixtures of ETMS and tetramethylorthosilicate (TMOS). The effects of ETMS content, pH value and solvent addition were investigated. The surface area, pore structure and hydrophobicity were studied using nitrogen and water sorption measurements. By ETMS modification of TMOS gels, high surface area, density and hydrophobicity were achieved. The 25 mole% ETMS-75 mole% TMOS was found to be the best composition for both aerogel and xerogel, which are hydrophobic and have surface areas of 1221 and 832 m2/g, respectively.

Sign in / Sign up

Export Citation Format

Share Document