Microwave-Assisted Synthesis and Photocatalytic Activity of Thiourea-Modified ZnO Nanoparticles

2013 ◽  
Vol 815 ◽  
pp. 133-141
Author(s):  
Hai Feng Zhang ◽  
Shi Xiang Lu ◽  
Wen Guo Xu ◽  
Feng Xin Gao
Keyword(s):  
Particle Size ◽  
Photocatalytic Activity ◽  
Zno Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Microwave Assisted Synthesis ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
Modified Zno Nanoparticles ◽  
Microwave Assisted Method

Thiourea-modified ZnO nanoparticles were prepared by the microwave-assisted method. The nanoparticles were characterized by X-ray diffraction (XRD), High-resolution transmission electron microscope (TEM), UV-Vis absorption spectroscopy (UV-Vis) and X-ray photoelectron spectroscopy (XPS). ZnO nanoparticles presented typical wurtzite structure. Microwave-assisted method and thiourea modifying reduced the particle size of ZnO corporately and the particle size of 2.0 mol% thiourea/ZnO was about 3 nm. The photocatalytic efficiency of thiourea-modified ZnO was influenced by the molar precent between thiourea and ZnO and 2.0 mol% thiourea/ZnO had the highest photocatalytic activity. The degradation rate of 30 mg/L C.I. Reactive Blue 4 could get to 85% in 50 min at room temperature when the concentration of 2.0 mol% thiourea/ZnO was 0.10 g/L.

scholarly journals Fast Microwave-Assisted Synthesis and Photoluminescence of CaWO4Nanocrystals

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Quanguo Li ◽  
Yanhua Shen ◽  
Taohai Li
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Microwave Assisted Synthesis ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
Ft Ir ◽  
Microwave Assisted Method

In this work, CaWO4nanoparticles have been synthesized by microwave-assisted method at a low temperature of 120°C. The as-prepared powders were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR). It is found that the reaction time played an important role in the morphology controlling and crystallinity level of CaWO4crystals. The effects of photoluminescent properties have a great relationship with crystallinity.

scholarly journals Hydrothermal Synthesis of Iodine-Doped Nanoplates with Enhanced Visible and Ultraviolet-Induced Photocatalytic Activities

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Jiang Zhang ◽  
Zheng-Hong Huang ◽  
Yong Xu ◽  
Feiyu Kang
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Oxygen Vacancies ◽  
Diffuse Reflectance Spectroscopy ◽  
Synergetic Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Photocatalytic Activities

The iodine-doped Bi2WO6(I-BWO) photocatalyst was prepared via a hydrothermal method using potassium iodide as the source of iodine. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. The photocatalytic activity of I-BWO for the degradation of rhodamine B (RhB) was higher than that of pure BWO and I2-BWO regardless of visible light (>420 nm) or ultraviolet light (<400 nm) irradiation. The results of DRS analysis showed that the I-BWO and I2-BWO catalysts had narrower band gaps. XPS analysis proved that the multivalent iodine species including I0and were coadsorbed on the defect surface of Bi2WO6in I-BWO. The enhanced PL intensity revealed that a large number of defects of oxygen vacancies were formed by the doping of iodine. The enhanced photocatalytic activity of I-BWO for degradation of RhB was caused by the synergetic effect of a small crystalline size, a narrow band gap, and plenty of oxygen vacancies.

scholarly journals A facile microwave-assisted synthesis of ZnO nanoparticles and their photocatalytic activity: Effect of pH

2021 ◽  
Vol 18 (2) ◽  
pp. 3-8
Author(s):  
Aura S. Merlano ◽  
Ángel Salazar
Keyword(s):  
Photocatalytic Activity ◽  
Zno Nanoparticles ◽  
Microwave Assisted Synthesis ◽  
Nano Zno ◽  
Effect Of Ph ◽  
Microwave Assisted ◽  
Activity Effect ◽  
Uv Visible

Este estudio reporta una síntesis fácil, libre de surfactantes y asistida por microondas para la producción de nanopartículas de óxido de zinc (ZnO). Se investigó el efecto del valor del pH sobre las propiedades químicas, ópticas, morfológicas y fotocatalíticas de las nanopartículas de ZnO. Las nanopartículas se caracterizaron mediante microscopía electrónica de barrido (SEM), espectroscopía infrarroja por transformada de Fourier (FTIR), espectroscopía de rayos X por dispersión de energía (EDS) y espectroscopía UV-visible (UV-Vis). El análisis SEM muestra que el tamaño de las partículas disminuye con el aumento del valor de pH. Los espectros UV-Vis muestran picos de absorción excitónica alrededor de 334-359 nm. Se encontró que la brecha de energía de las muestras disminuye con el aumento del valor de pH. Finalmente, se evaluó la eficiencia fotocatalítica de los nanomateriales de ZnO mediante la degradación de naranja de metileno (MO) bajo irradiación de luz UV-A y se logró una eficiencia de degradación del colorante del 93.04% para la muestra de ZnO con pH-13. Los resultados experimentales confirman que la ruta propuesta para producir ZnO es fácil, reproducible y amigable con el medio ambiente. Además, el nano ZnO tiene un gran potencial como fotocatalizador para eliminar compuestos orgánicos.

scholarly journals Photocatalytic Degradation of Estriol Using Iron-Doped TiO2 under High and Low UV-Irradiation

2018 ◽  
Author(s):  
Irwing M. Ramírez-Sánchez ◽  
Erick R. Bandala
Keyword(s):  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Uv Irradiation ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Bet Surface Area ◽  
Doped Tio2 ◽  
X Ray ◽  
Transmission Electron ◽  
Iron Doped

Iron Doped TiO2 nanoparticles (Fe-TiO2) were synthesized and photocatalitically investigated under high and low fluence values of UV-radiation. The Fe-TiO2 physical characterization was performed using X-ray Powder Diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), Diffuse Reflectance Spectroscopy (DRS), and X-Ray Photoelectron Spectroscopy (XPS) technique. The XPS evidenced that ferric ion (Fe3+) was in the lattice of TiO2 and co-dopants no intentionally added were also present due to the precursors of the synthetic method. The Fe3+ concentration played a key role in the photocatalytic generation of hydroxyl radical (&bull;OH) and estriol (E3) degradation. Fe-TiO2 materials accomplished E3 degradation, and it was found that the catalyst with 0.3 at. % content of Fe (0.3 Fe-TiO2) enhanced the photocatalytic activity under low UV-irradiation compared with no intentionally Fe-added TiO2 (zero-iron TiO2) and Aeroxide&reg; TiO2 P25. Furthermore, the enhanced photocatalytic activity of 0.3 Fe-TiO2 under low UV-irradiation may have applications when radiation intensity must be controlled, as in medical applications, or when strong UV absorbing species are present in water.

scholarly journals Properties and Photocatalytic Activity ofβ-Ga2O3Nanorods under Simulated Solar Irradiation

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Yinzhen Wang ◽  
Ning Li ◽  
Pingping Duan ◽  
Xuwei Sun ◽  
Benli Chu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Light Emission ◽  
Methyl Orange Solution ◽  
High Photocatalytic Activity ◽  
Solar Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Blue Solution ◽  
Simulated Solar Irradiation

β-Ga2O3nanorods are prepared by hydrothermal method and characterized by X-ray diffraction, high-resolution transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and photoluminescence spectra. The results reveal that high crystallinity, monoclinic phase ofβ-Ga2O3nanorods were prepared with a diameter of about 60 nm and length of 500 nm. Photoluminescence study indicates that theβ-Ga2O3nanorods exhibit a broad blue light emission at room temperature. Theβ-Ga2O3nanorods displayed high photocatalytic activity under simulated solar irradiation; after 2 h irradiation, over 95% of methylene blue solution and over 90% of methyl orange solution were decolorized. Since this process does not require additional hydrogen peroxide and uses solar light, it can be developed as an economically feasible and environmentally friendly method to treat dye effluent.

ZnFe2O4 Modified by Fe(NO3)3 for the Synthesis of Ionic Ferrofluids

2010 ◽  
Vol 177 ◽  
pp. 32-36 ◽  
Author(s):  
An Rong Wang ◽  
Jian Li ◽  
Qing Mei Zhang ◽  
Hua Miao
Keyword(s):  
Particle Size ◽  
Magnetic Properties ◽  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Znfe2o4 Nanoparticles

Weak magnetic ZnFe2O4 nanoparticles were prepared by coprecipitation and treated with different concentrations of Fe(NO3)3 solution. Untreated and treated particles were studied using a vibrating sample magnetometer, transmission electron microscope, by X-ray diffraction, X-ray energy dispersive spectroscopy and X photoelectron spectroscopy. The results showed that, after treatment, the ZnFe2O4/γ-Fe2O3 forms disphase nanoparticles, with enlarged size, enhanced magnetic properties and with a surface parceled with Fe(NO3)3. The size of the particles and their magnetic properties are related to the concentration of the treatment solution. The particle size and magnetic properties could be controlled by controlling the concentration of treating solution, therefore nanoparticles can be more widely used.

Surface Modification of the ZnO Nanoparticles with γ-Aminopropyltriethoxysilane and Study of Their Photocatalytic Activity, Optical Properties and Antibacterial Activities

2016 ◽  
Vol 14 (3) ◽  
pp. 785-794 ◽  
Author(s):  
Nurun Nahar Rabin ◽  
Jannatul Morshed ◽  
Hashi Akhter ◽  
Md. Saidul Islam ◽  
Md. Asjad Hossain ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Surface Modification ◽  
Zno Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Dye Degradation ◽  
Antibacterial Activities ◽  
Bet Analysis ◽  
Modified Zno Nanoparticles ◽  
Grafted Nanoparticles ◽  
Surface Modified

Abstract Surface modification of Zinc oxide nanoparticles (ZnO) with γ-aminopropyltriethoxy silane (APTES) was investigated. Successful surface modification of the nanoparticles was confirmed experimentally by X-ray Photoelectron Spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The effect of the surface modifier concentration on the grafting density and surface area was studied by CHN elemental analysis and Brunauer–Emmett–Teller (BET) analysis. The photocatalytic activity and UV shielding ability of the surface-modified particles prepared in water-ethanol solvent in the presence of the surface modifiers were compared to those of non-modified particles. As a case study, It was observed by methylene blue (MB) dye degradation experiment that the photocatalytic activity in the presence of modified nanoparticles was lower than that observed with non-modified ZnO nanoparticles. Dispersion stability tests visually showed that APTES grafted nanoparticles had acquired better stability than non-modified ZnO nanoparticles in aqueous solution.

scholarly journals Defective TiO2 Core-Shell Magnetic Photocatalyst Modified with Plasmonic Nanoparticles for Visible Light-Induced Photocatalytic Activity

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 672 ◽  
Author(s):  
Zuzanna Bielan ◽  
Agnieszka Sulowska ◽  
Szymon Dudziak ◽  
Katarzyna Siuzdak ◽  
Jacek Ryl ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Phenol Degradation ◽  
Magnetic Core ◽  
Magnetic Photocatalyst ◽  
X Ray ◽  
Transmission Electron ◽  
First Time

In the presented work, for the first time, the metal-modified defective titanium(IV) oxide nanoparticles with well-defined titanium vacancies, was successfully obtained. Introducing platinum and copper nanoparticles (NPs) as surface modifiers of defective d-TiO2 significantly increased the photocatalytic activity in both UV-Vis and Vis light ranges. Moreover, metal NPs deposition on the magnetic core allowed for the effective separation and reuse of the nanometer-sized photocatalyst from the suspension after the treatment process. The obtained Fe3O4@SiO2/d-TiO2-Pt/Cu photocatalysts were characterized by X-ray diffractometry (XRD) and specific surface area (BET) measurements, UV-Vis diffuse reflectance spectroscopy (DR-UV/Vis), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Further, the mechanism of phenol degradation and the role of four oxidative species (h+, e−, •OH, and •O2−) in the studied photocatalytic process were investigated.

One-pot microwave assisted approach for synthesis of CdSe/CdS core-shell quantum dots (QDs) and investigating optical properties

2016 ◽  
Vol 30 (07) ◽  
pp. 1650074 ◽  
Author(s):  
M. Molaei ◽  
F. Salari Bardsiri ◽  
A. R. Bahador ◽  
M. Karimipour
Keyword(s):  
Core Shell ◽  
Heat Sensitivity ◽  
X Ray Diffraction ◽  
Cdse Qds ◽  
One Pot ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
Core Shell Structure ◽  
Microwave Assisted Method

In this work, CdSe QDs were synthesized using a microwave assisted method and chemical reaction between NaHSe, CdSO4 at the presence of TGA as capping molecule. Thereafter without CdSe extraction, CdS shell was grown subsequently around CdSe cores by a reaction based on the heat sensitivity of Na2S2O3 dissociation. Synthesized QDs were characterized by means of X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), UV–Vis and photoluminescence (PL) spectroscopy. All of these analyzes confirmed formation of CdSe QDs and successfully growth of CdS shell on surface of CdSe to forming CdSe/CdS core-shell structure.

Sign in / Sign up

Export Citation Format

Share Document