Fabrication of Ytterbium-Doped Titanium Dioxide Nanoparticles Using Collagen as Template

2013 ◽  
Vol 873 ◽  
pp. 183-187
Author(s):  
Yi Wu Liu ◽  
Bi Wang ◽  
Bing Wei Luo ◽  
Qian He
Keyword(s):  
Titanium Dioxide ◽  
Titanium Dioxide Nanoparticles ◽  
Metal Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Crystallinity ◽  
Transmission Electron ◽  
Ft Ir ◽  
Doped Titanium Dioxide ◽  
Ytterbium Doping

Yb-doped titanium dioxide nanoparticles were synthesized using collagen as the template, and characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-Vis spectrophotometry, and Fourier transform infrared (FT-IR) spectra. The effect of doping concentration and calcination temperature on structure of TiO2was discussed. The results showed the Yb-TiO2nanoparticles have high crystallinity with the size of 18-28 nm. Ytterbium doping could inhibit the phase transformation from anatase to rutile of TiO2, reduce the crystallite size, improve thermal stability, and improve the light absorption. This study indicates that collagen could be used as an ideal biological template to prepare metal oxide nanoparticles with high crystallinity.

scholarly journals Solid State Reaction Synthesis and Characterization of Aluminum Doped Titanium Dioxide Nanomaterials

2020 ◽  
Vol 55 (2) ◽  
Author(s):  
Muna Muzahim Abbas ◽  
Mohammed Rasheed
Keyword(s):  
Titanium Dioxide ◽  
Solid State ◽  
Titanium Dioxide Nanoparticles ◽  
Weight Fraction ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
X Ray ◽  
Doped Titanium Dioxide ◽  
Diffraction Patterns

In this paper, aluminum doped titanium dioxide nanopowder with doping concentration of different weights were successfully prepared with a simple technique: the classic ceramic technique (or solid-state method). This technique permits the acquiring of powders as pellets with a small amount of the material. The best conditions for the prepared pellets are obtained. Titanium dioxide nanoparticles are mixed with different amounts of aluminum concentrations (0%, 3%, 5%, and 7%). The powders were then mixed and consolidated into pellets and sintered using a conventional furnace at 1100oC. The mechanical, thermal, structural, morphological (including roughness of the samples’ surfaces), and optical properties for those as-prepared samples are demonstrated by: Shore D hardness instrument, roughness test Instrument, Lee's Disc, X-ray diffraction, optical microscope, scanning electronic microscope, energy-dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy, respectively. The effect of aluminum doped concentrations on the characteristics of titanium dioxide nanoparticles depending on the above instruments are studied. The X-ray diffraction patterns appear to the crystallinity of these materials with a grain size between 20 nm and 30 nm. A roughness measurement indicates that the value of titanium dioxide nanoparticles decreases with the addition of aluminum weights according to the results of the hardness of the samples. Moreover, the results showed that the thermal conductivity increased with the increasing weight fraction of aluminum material. The main goal of the present paper is to investigate the annealing temperature-dependent behavior of the broadening parameter and the characteristics of aluminum doped titanium dioxide nanoparticles.

scholarly journals Hydrothermal Synthesis, Characterization and Exploration of Photocatalytic Activities of Polyoxometalate: Ni-CoWO4 Nanoparticles

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 456
Author(s):  
Fahad A. Alharthi ◽  
Hamdah S. Alanazi ◽  
Amjad Abdullah Alsyahi ◽  
Naushad Ahmad
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Photocatalytic Reactions ◽  
Cobalt Tungstate

This study demonstrated the hydrothermal synthesis of bimetallic nickel-cobalt tungstate nanostructures, Ni-CoWO4 (NCW-NPs), and their phase structure, morphology, porosity, and optical properties were examined using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman instruments. It was found that as-calcined NCW-NPs have a monoclinic phase with crystal size ~50–60 nm and is mesoporous. It possessed smooth, spherical, and cubic shape microstructures with defined fringe distance (~0.342 nm). The photocatalytic degradation of methylene blue (MB) and rose bengal (RB) dye in the presence of NCW-NPs was evaluated, and about 49.85% of MB in 150 min and 92.28% of RB in 90 min degraded under visible light. In addition, based on the scavenger’s study, the mechanism for photocatalytic reactions is proposed.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Effect of Synthesis Temperature on Particles Size and Morphology of Zirconium Oxide Nanoparticle

2017 ◽  
Vol 50 ◽  
pp. 18-31 ◽  
Author(s):  
Rudzani Sigwadi ◽  
Simon Dhlamini ◽  
Touhami Mokrani ◽  
Patrick Nonjola
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Zirconium Oxide ◽  
Thermo Gravimetric Analysis ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Crystallite Sizes ◽  
Ft Ir

The paper presents the synthesis and investigation of zirconium oxide (ZrO2) nanoparticles that were synthesised by precipitation method with the effects of the temperatures of reaction on the particles size, morphology, crystallite sizes and stability at high temperature. The reaction temperature effect on the particle size, morphology, crystallite sizes and stabilized a higher temperature (tetragonal and cubic) phases was studied. Thermal decomposition, band structure and functional groups were analyzed by Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Thermo-gravimetric analysis (TGA) and Fourier transform infrared (FT-IR). The crystal structure was determined using X-ray diffraction. The morphology and the particle size were studied using (SEM) and (TEM). The shaped particles were confirmed through the SEM analysis. The transmission electron microscopic analysis confirmed the formation of the nanoparticles with the particle size. The FT-IR spectra showed the strong presence of ZrO2 nanoparticles.

scholarly journals Dual Light- and pH-Responsive Composite of Polyazo-Derivative Grafted Cellulose Nanocrystals

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1725 ◽  
Author(s):  
Xiaohong Liu ◽  
Ming Li ◽  
Xuemei Zheng ◽  
Elias Retulainen ◽  
Shiyu Fu
Keyword(s):  
Cellulose Nanocrystals ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray Diffraction ◽  
Responsive Materials ◽  
X Ray ◽  
Ph Response ◽  
Transmission Electron ◽  
Ft Ir ◽  
Hexyl Methacrylate

As a type of functional group, azo-derivatives are commonly used to synthesize responsive materials. Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of cotton, were dewatered and reacted with 2-bromoisobuturyl bromide to form a macro-initiator, which grafted 6-[4-(4-methoxyphenyl-azo) phenoxy] hexyl methacrylate (MMAZO) via atom transfer radical polymerization. The successful grafting was supported by Fourier transform infrared spectroscopy (FT-IR) and Solid magnetic resonance carbon spectrum (MAS 13C-NMR). The morphology and surface composition of the poly{6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate} (PMMAZO)-grafted CNCs were confirmed with Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The grafting rate on the macro-initiator of CNCs was over 870%, and the polydispersities of branched polymers were narrow. The crystal structure of CNCs did not change after grafting, as determined by X-ray diffraction (XRD). The polymer PMMAZO improved the thermal stability of cellulose nanocrystals, as shown by thermogravimetry analysis (TGA). Then the PMMAZO-grafted CNCs were mixed with polyurethane and casted to form a composite film. The film showed a significant light and pH response, which may be suitable for visual acid-alkali measurement and reversible optical storage.

Effect of Sonication Time and Calcination Temperature on Physical Properties of Titanium Dioxide Synthesized via Sonochemical-Assisted Process

2013 ◽  
Vol 802 ◽  
pp. 252-256 ◽  
Author(s):  
Chokchai Kahattha ◽  
Naratip Vittayakorn ◽  
Wisanu Pecharapa
Keyword(s):  
Titanium Dioxide ◽  
Electron Microscope ◽  
Titanium Dioxide Nanoparticles ◽  
Anatase Phase ◽  
Titanium Isopropoxide ◽  
Treatment Temperature ◽  
Sonication Time ◽  
X Ray Diffraction ◽  
Calcination Process ◽  
Transmission Electron

Titanium dioxide nanoparticles (TiO2) were successfully synthesized via a sonochemical-assisted process using titanium isopropoxide as the titanium sources and calcination process at 300-500 °C. The effect of sonication time and heat treatment temperature on structural and nanostructure properties of the nanoparticles were characterized by X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM) and transmission electron microscope (TEM). The XRD and Raman results indicated that the crystalline of as-sonochemically synthesized TiO2 nanoparticles corresponded to anatase phase of TiO2 after sonication for 30 mim. The high quality crystalline anatase phase and increasing of crystalline size can be obtained after calcinations process.

Synthesis of Indole Derivatives Using Biosynthesized ZnO-CaO Nanoparticles as an Efficient Catalyst

2021 ◽  
Vol 66 ◽  
pp. 61-71
Author(s):  
Tahereh Heidarzadeh ◽  
Navabeh Nami ◽  
Daryoush Zareyee
Keyword(s):  
Electron Microscopy ◽  
Indole Derivatives ◽  
X Ray Diffraction ◽  
Efficient Catalyst ◽  
X Ray ◽  
Transmission Electron ◽  
Solvent Free Conditions ◽  
Ft Ir ◽  
Eggshell Waste ◽  
Aromatic And Aliphatic Amines

The principal aim of this research is using biosynthesized ZnO-CaO nanoparticles (NPs) for preparation of indole derivatives. ZnO-CaO NPs have been prepared using Zn(CH3COO)2 and eggshell waste powder in solvent-free conditions. Morphology and structure of NPs were determined by FT-IR, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive spectra (EDS). It was used as a highly efficient catalyst for the synthesis of indole derivatives. Some indole derivatives were synthesized by the reaction of indole, formaldehyde, aromatic and aliphatic amines in the presence of ZnO-CaO NPs (5 mol%) in ethanol under reflux conditions. The assigned structure was further established by CHN analyses, NMR, and FT-IR spectra. Because of excellent capacity, the exceedingly simple workup and good yield, eco-friendly catalyst ZnO-CaO NPs were proved to be a good catalyst for this reaction.

Doping Titanium Dioxide by Fluoride Ion

2019 ◽  
Vol 946 ◽  
pp. 181-185 ◽  
Author(s):  
Sergei N. Fedorov ◽  
Vladimir Yuryevich Bazhin ◽  
Vladimir G. Povarov
Keyword(s):  
Titanium Dioxide ◽  
Hydrofluoric Acid ◽  
Thermodynamic Data ◽  
Temperature Increase ◽  
Sol Gel ◽  
Chemical Properties ◽  
Fluoride Ion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Doped Titanium Dioxide

Titanium dioxide has a special feature: anatase, to rutile transformation which was considered in our investigations. It is especially important to keep anatase form of titanium dioxide for photocatalytic materials, different ceramics with tribo-chemical properties, self-cleaning coatings and self-sterilizing coatings. For that only one of the titanium dioxide forms is more suitable – anatase, which is more active but not stable, because it transforms to rutile during the time or with the temperature increase loses its activity. Different methods of stabilising anatase have been considered in the paper. Several doping agents have been determined and it was chosen fluorine ion to modify titanium dioxide. Stabilization of anatase is achieved by preparing the reaction mixture by a sol-gel method with hydrofluoric acid. It has shown thermodynamic data, results of experiment, temperatures of anatase to rutile transformation of non-doped and doped titanium dioxide, its X-Ray diffraction and TGA. It is proved that titanium dioxide doped by fluorine ion keeps anatase form till the temperature is more than 1000 °C.

scholarly journals Preparation, Characterization, and Performance Analysis of S-Doped Bi2MoO6 Nanosheets

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1341 ◽  
Author(s):  
Ruiqi Wang ◽  
Duanyang Li ◽  
Hailong Wang ◽  
Chenglun Liu ◽  
Longjun Xu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
X Ray Diffraction ◽  
Photo Degradation ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
And Performance ◽  
Adsorption Desorption ◽  
Excellent Stability

S-doped Bi2MoO6 nanosheets were successfully synthesized by a simple hydrothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N2 adsorption–desorption isotherms, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), elemental mapping spectroscopy, photoluminescence spectra (PL), X-ray photoelectron spectroscopy (XPS), and UV-visible diffused reflectance spectra (UV-vis DRS). The photo-electrochemical performance of the samples was investigated via an electrochemical workstation. The S-doped Bi2MoO6 nanosheets exhibited enhanced photocatalytic activity under visible light irradiation. The photo-degradation rate of Rhodamine B (RhB) by S-doped Bi2MoO6 (1 wt%) reached 97% after 60 min, which was higher than that of the pure Bi2MoO6 and other S-doped products. The degradation rate of the recovered S-doped Bi2MoO6 (1 wt%) was still nearly 90% in the third cycle, indicating an excellent stability of the catalyst. The radical-capture experiments confirmed that superoxide radicals (·O2−) and holes (h+) were the main active substances in the photocatalytic degradation of RhB by S-doped Bi2MoO6.

scholarly journals Influence of different synthesis conditions on properties of oleic acid-coated-Fe3O4 nanoparticles

2015 ◽  
Vol 33 (1) ◽  
pp. 100-106 ◽  
Author(s):  
Atieh Aliakbari ◽  
Majid Seifi ◽  
Sharareh Mirzaee ◽  
Hoda Hekmatara
Keyword(s):  
Oleic Acid ◽  
Room Temperature ◽  
Magnetic Measurement ◽  
Precursor Solution ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Transmission Electron ◽  
Ft Ir

AbstractIn the present paper, iron oxide nanoparticles coated by oleic acid have been synthesized in different conditions by coprecipitation method. For investigating the effect of time spent on adding the oleic acid to the precursor solution, two different processes have been considered. The as synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). Magnetic measurement was carried out at room temperature using a vibrating sample magnetometer (VSM). The results show that the magnetic nanoparticles decorated with oleic acid decreased the saturation of magnetization. From the data, it can also be concluded that the magnetization of Fe3O4/oleic acid nanoparticles depends on synthesis conditions.

Sign in / Sign up

Export Citation Format

Share Document