Evaluation of Energy Efficiency in Retrofitting Residential Buildings with Large-Panel Structures

2014 ◽  
Vol 899 ◽  
pp. 24-29 ◽  
Author(s):  
Emanuel Megyesi ◽  
Mariana Brumaru
Keyword(s):  
Energy Efficiency ◽  
Large Scale ◽  
Residential Buildings ◽  
Energy Performance ◽  
Calculation Methods ◽  
East European ◽  
Large Panel ◽  
Before And After ◽  
Reduction Of Co2 ◽  
The Eu

Modular blocks of flats built with large prefabricated panels have become widespread in most of central and East-European countries particularly in the 80es, populating large-scale neighbourhoods. In Romania are representing about 37% of the total fund of apartment blocks, being present in most of the cities. The high percentage of thermal bridges and reduced design thermal resistance of the envelope make these buildings a priority in thermal retrofitting. Using up-to-date calculation methods, the paper presents a thorough analysis of the energy performance of large-panel residential buildings (apartment blocks) before and after renovation. The conclusions are focused on the practical measures to be undertaken for bringing the energy efficiency after retrofitting at the highest possible degree, thus meeting the requirements of the EU legislation and the targets set in the field of energy performance and reduction of CO2 emissions.

scholarly journals ALDREN: A Methodological Framework to Support Decision-Making and Investments in Deep Energy Renovation of Non-Residential Buildings

Buildings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 3
Author(s):  
Marta Maria Sesana ◽  
Graziano Salvalai ◽  
Diletta Brutti ◽  
Corinne Mandin ◽  
Wenjuan Wei
Keyword(s):  
Decision Making ◽  
Energy Savings ◽  
Residential Buildings ◽  
Energy Performance ◽  
Indoor Environmental Quality ◽  
Methodological Framework ◽  
Eu Directive ◽  
Before And After ◽  
Support Decision Making ◽  
The Eu

Since 2002, the Energy Performance of Buildings Directive (EPBD) has set up the path to improve the efficiency gains in the EU building sector, including measures that should accelerate the rate of building renovation towards more energy efficient systems. Under the 2010 EPBD, all EU countries have established independent energy performance certification systems supported by independent mechanisms of control and verification. The EU directive 2018/844 has introduced different novelties and one of these regards the possibility for the Member States, together with the Long-Term Renovation Strategies (LTRS), to introduce an optional Building Renovation Passport Article 2a.1(c), considered as an empowering document that gives more reliable and independent information on the potential for energy savings that is tied up in their buildings. On 14 October 2020, the European Commission launched its Communication and Strategy on the Renovation Wave initiative, intending to double the current Europe’s renovation rate to make the continent carbon neutral by 2050. However, current practices and tools of energy performance assessment and certification applied across Europe face several challenges. In this context, the ALDREN project is a methodological framework that aims to support decision-making and investment in deep energy renovation of nonresidential buildings, based on a set of procedures (modules) that consist in the step-by-step implementation of protocols to assess the energy performance, indoor environmental quality, and financial value of buildings, before and after the energy renovation. The paper presents the ALDREN overall procedure with a focus on the development of the Building Renovation Passport and its application to an Italian office building.

Upgrading Energy Efficient Housing and Creating Jobs: It Works Both Ways

2014 ◽  
Vol 39 (2) ◽  
pp. 34-40
Author(s):  
Frits Meijer ◽  
Henk Visscher
Keyword(s):  
Energy Efficiency ◽  
Large Scale ◽  
Housing Stock ◽  
Energy Performance ◽  
Housing Associations ◽  
Building Stock ◽  
Existing Building ◽  
Investment Programme ◽  
The Eu ◽  
New Jobs

The European Commission and EU member states have prioritised the renovation of the existing housing stock as a means of achieving their energy-efficiency targets. As buildings account for 40% of Europe’s energy consumption and much of this is used in the residential sector a major breakthrough could be realized here. Despite the fact that energy saving targets have been prioritized in EU and national policy programme’s, progress is slow. The actual rate and extent of renovations are by fare not enough to achieve the targets. Although the necessity of energy savings is acknowledged by institutional investors in housing, housing associations, individual homeowners and occupants, it appears to be difficult to get sufficient support for energy efficiency renovations. The current economic situation is an additional barrier preventing large scale investments in energy renovating the housing stock. This article connects the realisation of energy efficiency goals with the creation of jobs in the EU. The shift from new-build to renovation will have considerable effects on employment in especially the construction industry and the qualifications required by the workforce. Studies show that for every €1 million investment in the existing building stock in the form of energy renovation work, 12 to 17 new jobs could be created. Potentially this could lead to may new jobs. However, there are many uncertainties in these calculations. Are these direct or indirect jobs, what sectors would benefit, are these jobs created within the EU and what would be the net effect on the labour market? Nonetheless these uncertainties, the positive employment effects will prevail. A new and ambitious investment programme in the housing sector could not only improve the energy performance of the sector but create 100.000’s of valuable jobs at a time when these are seriously needed.

scholarly journals Decarbonising real estate

2020 ◽  
Vol 13 (3) ◽  
pp. 387-408
Author(s):  
Sara Jane Wilkinson ◽  
Sarah Sayce
Keyword(s):  
Energy Efficiency ◽  
Large Scale ◽  
Residential Buildings ◽  
Well Being ◽  
Energy Performance ◽  
Residential Property ◽  
Content Type ◽  
Study Results ◽  
The Relationship

Purpose About 27 per cent of the total UK carbon emissions are attributed to residential buildings; therefore, improvements to the energy efficiency of the stock offers great potential. There are three main ways to achieve this. First is a mandatory approach, minimum energy efficiency standards are set and applied to new and existing buildings. Option 2 is voluntary, using energy ratings that classify performance to stimulate awareness and action. Third, financial measures, incentives and taxes, are applied to “nudge” behaviours. Most westernised countries have adopted a combination of Options 2 and 3, with the belief that the market will incentivize efficient properties. The belief is voluntary measures will stimulate demand, leading to value premiums. This paper aims to seek a deeper understanding of the relationship between energy efficiency and the value of residential property in Europe and, by so doing, to determine whether stronger policies are required to realise decarbonisation. Design/methodology/approach This paper reviews the current academic literature and large-scale quantitative studies conducted in Europe, mostly using hedonic pricing analysis to seek a relationship between energy performance certificates (EPCs) and either capital or rental values. It compares these to the reported findings of three case study projects that take a variety of different research approaches, all of which have the ambition to understand market behaviours and stimulate occupier or/and owner demand for energy efficient buildings. Findings The large-scale academic study results generally show a positive relationship between observed market prices and EPCs, which are commonly taken as surrogates for efficiency; however, outcomes are variable. One large study found energy upgrades may increase value, but not to the point where costs outweigh the value gain. Other studies found high returns on investment in energy efficiency technologies. The case study projects, however, revealed a more nuanced set of arguments in terms of the relationship between energy efficiency and market behaviours. Whilst there is some evidence that energy efficiency is beginning to impact on value, it is small compared to other value drivers; other drivers, including health, well-being and private sector finance deals, may prove more powerful market drivers. Further, the empirical findings reported point towards the emergence of a “brown” discount being more likely to be the long-term trend than a green premium. It is concluded that the current levels of action are unlikely to deliver the levels of decarbonisation urgently needed. Research limitations/implications This is a desktop study of other European studies that may have collected data on slightly different variables. Practical implications This study shows that more action is required to realise decarbonisation in new and existing residential property in the European states considered. The sector offers potential for substantial reductions, and other mandatory approaches need to be considered. Originality/value This is a timely review of the current outcomes of European programmes (EPCs) adopted in several countries to increase energy efficiency in the residential sector through a voluntary mechanism. The results show that more action is needed.

scholarly journals Testing a Gypsum Composite Based on Raw Gypsum with a Direct Admixture of Paraffin and Polymer to Improve Thermal Properties

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3241
Author(s):  
Krzysztof Powała ◽  
Andrzej Obraniak ◽  
Dariusz Heim
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Phase Change ◽  
Large Scale ◽  
Building Materials ◽  
Residential Buildings ◽  
Energy Performance ◽  
Polymer Content ◽  
Volumetric Heat Capacity

The implemented new legal regulations regarding thermal comfort, the energy performance of residential buildings, and proecological requirements require the design of new building materials, the use of which will improve the thermal efficiency of newly built and renovated buildings. Therefore, many companies producing building materials strive to improve the properties of their products by reducing the weight of the materials, increasing their mechanical properties, and improving their insulating properties. Currently, there are solutions in phase-change materials (PCM) production technology, such as microencapsulation, but its application on a large scale is extremely costly. This paper presents a solution to the abovementioned problem through the creation and testing of a composite, i.e., a new mixture of gypsum, paraffin, and polymer, which can be used in the production of plasterboard. The presented solution uses a material (PCM) which improves the thermal properties of the composite by taking advantage of the phase-change phenomenon. The study analyzes the influence of polymer content in the total mass of a composite in relation to its thermal conductivity, volumetric heat capacity, and diffusivity. Based on the results contained in this article, the best solution appears to be a mixture with 0.1% polymer content. It is definitely visible in the tests which use drying, hardening time, and paraffin absorption. It differs slightly from the best result in the thermal conductivity test, while it is comparable in terms of volumetric heat capacity and differs slightly from the best result in the thermal diffusivity test.

scholarly journals Integrating GIS-Based Point of Interest and Community Boundary Datasets for Urban Building Energy Modeling

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1049
Author(s):  
Zhang Deng ◽  
Yixing Chen ◽  
Xiao Pan ◽  
Zhiwen Peng ◽  
Jingjing Yang
Keyword(s):  
Large Scale ◽  
Residential Buildings ◽  
Building Energy ◽  
Energy Performance ◽  
Energy Modeling ◽  
Office Buildings ◽  
Building Energy Modeling ◽  
Downtown Area ◽  
Point Of Interest

Urban building energy modeling (UBEM) is arousing interest in building energy modeling, which requires a large building dataset as an input. Building use is a critical parameter to infer archetype buildings for UBEM. This paper presented a case study to determine building use for city-scale buildings by integrating the Geographic Information System (GIS) based point-of-interest (POI) and community boundary datasets. A total of 68,966 building footprints, 281,767 POI data, and 3367 community boundaries were collected for Changsha, China. The primary building use was determined when a building was inside a community boundary (i.e., hospital or residential boundary) or the building contained POI data with main attributes (i.e., hotel or office building). Clustering analysis was used to divide buildings into sub-types for better energy performance evaluation. The method successfully identified building uses for 47,428 buildings among 68,966 building footprints, including 34,401 residential buildings, 1039 office buildings, 141 shopping malls, and 932 hotels. A validation process was carried out for 7895 buildings in the downtown area, which showed an overall accuracy rate of 86%. A UBEM case study for 243 office buildings in the downtown area was developed with the information identified from the POI and community boundary datasets. The proposed building use determination method can be easily applied to other cities. We will integrate the historical aerial imagery to determine the year of construction for a large scale of buildings in the future.

scholarly journals Reconstruction of 5-storey large panel buildings, use of atmospheric precipitation water for technical purposes in the building

2020 ◽  
Vol 02 (12) ◽  
pp. 86-89
Author(s):  
Axmedov Tolkin ◽  
Keyword(s):  
Energy Efficiency ◽  
Urban Areas ◽  
Residential Buildings ◽  
Atmospheric Precipitation ◽  
Basic Information ◽  
Atmospheric Water ◽  
Large Panel ◽  
Precipitation Water

This article provides basic information on engineering selection and beautification of urban areas where 5-storey residential buildings should be built in response to emergencies in ways to increase the energy efficiency of buildings using atmospheric water for technical purposes.

PERFORMANCE INDICATORS FOR ENERGY EFFICIENCY RETROFITTING IN MULTIFAMILY RESIDENTIAL BUILDINGS

2019 ◽  
Vol 14 (2) ◽  
pp. 109-136
Author(s):  
Chaitali Basu ◽  
Virendra Kumar Paul ◽  
M.G. Matt Syal
Keyword(s):  
Energy Efficiency ◽  
Performance Assessment ◽  
Performance Indicators ◽  
Residential Buildings ◽  
Building Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Assessment Process ◽  
Second Phase ◽  
A Priority

The energy performance of an existing building is the amount of energy consumed to meet various needs associated with the standardized use of a building and is reflected in one or more indicators known as Building Energy Performance Indicators (EnPIs). These indicators are distributed amongst six main factors influencing energy consumption: climate, building envelope, building services and energy systems, building operation and maintenance, occupants' activities and behaviour, and indoor environmental quality. Any improvement made to either the existing structure or the physical and operational upgrade of a building system that enhances energy performance is considered an energy efficiency retrofit. The main goal of this research is to support the implementation of multifamily residential building energy retrofits through expert knowledge consensus on EnPIs for energy efficiency retrofit planning. The research methodology consists of a comprehensive literature review which has identified 35 EnPIs for assessing performance of existing residential buildings, followed by a ranking questionnaire survey of experts in the built-environment to arrive at a priority listing of indicators based on mean rank. This was followed by concordance analysis and measure of standard deviation. A total of 280 experts were contacted globally for the survey, and 106 completed responses were received resulting in a 37.85% response rate. The respondents were divided into two groups for analysis: academician/researchers and industry practitioners. The primary outcome of the research is a priority listing of EnPIs based on the quantitative data from the knowledge-base of experts from these two groups. It is the outcome of their perceptions of retrofitting factors and corresponding indicators. A retrofit strategy consists of five phases for retrofitting planning in which the second phase comprises an energy audit and performance assessment and diagnostics. This research substantiates the performance assessment process through the identification of EnPIs.

scholarly journals Application of Rough Set Theory (RST) to Forecast Energy Consumption in Buildings Undergoing Thermal Modernization

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1309 ◽  
Author(s):  
Tomasz Szul ◽  
Stanisław Kokoszka
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Set Theory ◽  
Rough Set ◽  
Energy Demand ◽  
Rough Set Theory ◽  
Residential Buildings ◽  
Simple Procedure ◽  
Energy Performance ◽  
Improve Energy Efficiency

In many regions, the heat used for space heating is a basic item in the energy balance of a building and significantly affects its operating costs. The accuracy of the assessment of heat consumption in an existing building and the determination of the main components of heat loss depends to a large extent on whether the energy efficiency improvement targets set in the thermal upgrading project are achieved. A frequent problem in the case of energy calculations is the lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for a quick technical analysis of measures taken to improve energy efficiency in existing buildings. These methods should have satisfactory results in predicting energy consumption where the input is limited, inaccurate, or uncertain. Therefore, the aim of this work was to test the usefulness of a model based on Rough Set Theory (RST) for estimating the thermal energy consumption of buildings undergoing an energy renovation. The research was carried out on a group of 109 thermally improved residential buildings, for which energy performance was based on actual energy consumption before and after thermal modernization. Specific sets of important variables characterizing the examined buildings were distinguished. The groups of variables were used to estimate energy consumption in such a way as to obtain a compromise between the effort of obtaining them and the quality of the forecast. This has allowed the construction of a prediction model that allows the use of a fast, relatively simple procedure to estimate the final energy demand rate for heating buildings.

scholarly journals Shortcomings and Suggestions to the EPC Recommendation List of Measures: In-Depth Interviews in Six Countries

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2516 ◽  
Author(s):  
Alex Gonzalez Caceres
Keyword(s):  
Energy Demand ◽  
Energy Use ◽  
Residential Buildings ◽  
Energy Performance ◽  
Existing Building ◽  
Efficiency Measures ◽  
Oil Crisis ◽  
Depth Interviews ◽  
Great Portion ◽  
The Eu

Dwellings built between 1945 and 1980 have the largest energy demand in the EU, which by 2009 represented 70% of the final energy use in buildings. A great portion of these dwellings have not been retrofitted and most of them were not built with any energy efficiency measures, since most of the energy regulations were implemented after the oil crisis in the 70s. To face this issue several actions were taken in the EU, among these, the implementation of Energy Performance Certification, which includes a Recommendation List of Measures (RLMs) to retrofit the property. The main objective of this study is to identify the weaknesses of the RLMs and to suggest changes to improve the quality and impact of this feature. The results indicate that to retrofit an existing building, the RLMs lack information for decision-making. The study suggests important barriers to overcome for achieving potential energy reductions in existing residential buildings, highlighting improvements to the recommendation content and its implementation.

Sign in / Sign up

Export Citation Format

Share Document