scholarly journals Testing a Gypsum Composite Based on Raw Gypsum with a Direct Admixture of Paraffin and Polymer to Improve Thermal Properties

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3241
Author(s):  
Krzysztof Powała ◽  
Andrzej Obraniak ◽  
Dariusz Heim
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Phase Change ◽  
Large Scale ◽  
Building Materials ◽  
Residential Buildings ◽  
Energy Performance ◽  
Polymer Content ◽  
Volumetric Heat Capacity

The implemented new legal regulations regarding thermal comfort, the energy performance of residential buildings, and proecological requirements require the design of new building materials, the use of which will improve the thermal efficiency of newly built and renovated buildings. Therefore, many companies producing building materials strive to improve the properties of their products by reducing the weight of the materials, increasing their mechanical properties, and improving their insulating properties. Currently, there are solutions in phase-change materials (PCM) production technology, such as microencapsulation, but its application on a large scale is extremely costly. This paper presents a solution to the abovementioned problem through the creation and testing of a composite, i.e., a new mixture of gypsum, paraffin, and polymer, which can be used in the production of plasterboard. The presented solution uses a material (PCM) which improves the thermal properties of the composite by taking advantage of the phase-change phenomenon. The study analyzes the influence of polymer content in the total mass of a composite in relation to its thermal conductivity, volumetric heat capacity, and diffusivity. Based on the results contained in this article, the best solution appears to be a mixture with 0.1% polymer content. It is definitely visible in the tests which use drying, hardening time, and paraffin absorption. It differs slightly from the best result in the thermal conductivity test, while it is comparable in terms of volumetric heat capacity and differs slightly from the best result in the thermal diffusivity test.

scholarly journals Investigation of Thermal Properties of Novel Phase Change Material Mixtures (Octadecane-Diamond) with Laser Flash Analysis

2019 ◽  
Vol 26 (4) ◽  
pp. 211-218
Author(s):  
Mateusz Sierakowski ◽  
Wojciech Godlewski ◽  
Roman Domański ◽  
Jakub Kapuściński ◽  
Tomasz Wiśniewski ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Phase Change ◽  
Power Plants ◽  
Large Scale ◽  
Phase Change Materials ◽  
Heat Dissipation ◽  
Electronics Cooling ◽  
Diamond Powder ◽  
Heat Of Fusion

AbstractPhase change materials (PCMs) are widely used in numerous engineering fields because of their good heat storage properties and high latent heat of fusion. However, a big group of them has low thermal conductivity and diffusivity, which poses a problem when it comes to effective and relatively fast heat transfer and accumulation. Therefore, their use is limited to systems that do not need to be heated or cooled rapidly. That is why they are used as thermal energy storage systems in both large scale in power plants and smaller scale in residential facilities. Although, if PCMs are meant to play an important role in electronics cooling, heat dissipation, or temperature stabilization in places where the access to cooling water is limited, such as electric automotive industry or hybrid aviation, a number of modifications and improvements needs to be introduced. Investigation whether additional materials of better thermal properties will affect the thermal properties of PCM is therefore of a big interest. An example of such material is diamond powder, which is a popular additive used in abradants. Its thermal diffusivity and conductivity is significantly higher than for a pure PCM. The article presents the results of an analysis of the effect of diamond powder on thermal conductivity and diffusivity of phase change materials in the case of octadecane.

scholarly journals Novel Dual Walling Cob Building: Dynamic Thermal Performance

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7663
Author(s):  
Kaoutar Zeghari ◽  
Ayoub Gounni ◽  
Hasna Louahlia ◽  
Michael Marion ◽  
Mohamed Boutouil ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Water Content ◽  
Wheat Straw ◽  
Numerical Study ◽  
Energy Performance ◽  
Climatic Conditions ◽  
Structural Walls ◽  
Hemp Shiv

This paper emphasizes the experimental and numerical study of new cob mixes used for insulation and load bearing wall elements. The experimental study provides complete datasets of thermal properties of the new walling materials, using cob with density ranging from 1107 kg/m3 to 1583 kg/m3 for structural walls and less than 700 kg m−3 for insulation walls. Various mixes of French soils and fibres (reed, wheat straw, hemp shiv, hemp straw, and flax straw) with different water contents are studied. The lowest average thermal conductivity is obtained for the structural cob mix prepared of 5% wheat straw and 31% of water content. The insulation mix, prepared with 25% reed and 31% water content, has the lowest thermal conductivity. Investigation of diffusivity, density, and heat capacity shows that, when thermal conductivity is lower than 0.4 W m−1 K−1, the decrease in cob density leads to better insulation values and higher heat capacity. Little variation is noticed regarding the density and heat capacity for cob mixes with thermal conductivity higher than 0.4 W m−1 K−1. Furthermore, the non-uniformity of local thermal conductivity and heat losses through the samples is due mainly to the non-uniform distribution of fibres inside the mixes inducing an increase in heat loss up to 50% for structural walls and 25% for insulation walls. Cob thermal properties are used in a comparative simulation case study of a typical house under French and UK climatic conditions. The energy performance of the conventional building is compared to a dual walled cob building, showing remarkable reduction in energy consumption as the cob walls, whilst maintaining comfortable indoor conditions without additional heating.

Exact Solution of Heat Conduction in a Two-Domain Parallelepiped With an Orthotropic Layer and Its Application to the Estimation of the Three-Dimensional Thermal Conductivity Tensor and Volumetric Heat Capacity of the Orthotropic Layer

2002 ◽  
Author(s):  
Cuauhtemoc Aviles-Ramos
Keyword(s):  
Thermal Conductivity ◽  
Heat Flux ◽  
Exact Solution ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Hybrid Algorithm ◽  
Three Dimensional ◽  
Volumetric Heat Capacity ◽  
Parameter Estimation Problem ◽  
Orthotropic Layer

The three-dimensional exact solution of heat conduction in a two-layer composite is found applying the method of separation of variables. One layer is orthotropic and the other layer is isotropic. This solution is used to calculate sensitivity coefficients with respect to the thermophysical properties of the orthotropic layer at fourteen thermocouple locations. Numerical experiments are carried out to solve a parameter estimation problem that involves the estimation of the thermal conductivities in the x-, y-, and z-directions, the volumetric heat capacity of the orthotropic layer, the effective thermal conductivity of the isotropic layer, and the heat flux input. The exact solution is used to generate temperature readings at fourteen thermocouple locations. First, the parameter estimation problem is solved using the exact temperatures and a hybrid algorithm to estimate the thermal properties and the heat flux. Second, random noise is added to the exact temperatures and the thermal properties and heat flux are estimated using the same hybrid algorithm. It is found that when using the exact temperatures, the minimized quadratic functional has a value of 2.4×10−16 (°C)2 and the estimated properties agree to the ninth decimal place with the “exact” properties.

scholarly journals The Variation Mechanism of Thermal Properties of Loess with Different Water Contents during Freezing

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Xihao Dong ◽  
Shuai Liu ◽  
Yuanxiang Yu
Keyword(s):  
Heat Transfer ◽  
Phase Transition ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Water Content ◽  
Volumetric Heat Capacity ◽  
Soil Particles ◽  
Water Ice ◽  
Variation Mechanism

The thermal properties of soils are affected by many factors, such as temperature, water content, and structure. Based on the transient plane source method of thermal physics, the thermal properties of loess with different water content during the freezing process were tested. We analyzed the variation mechanism of thermal properties from the perspective of phase change. Based on the Pore/Particle and Crack Analysis System (PCAS) and theory of heat transfer, we then analyzed the microstructure and heat conduction process of loess. And a calculation model of volumetric heat capacity of frozen soil was presented. The results show that, in the major phase transition zone, the variation of the thermal properties of loess with temperature is the most significant. And the thermal diffusivity increases sharply with the significant increase of thermal conductivity and the rapid decrease of volumetric heat capacity. Moisture content not only increases the thermal conductivity and volume heat capacity of loess but also makes the influence of temperature on the thermophysical parameters more significant. The effect of temperature on thermal properties is mainly due to the change of heat transfer media caused by phase transition of water-ice, followed by the change of thermal properties of heat transfer media such as soil particles, water, ice, and air with temperature. Increasing the water content reduces the contact thermal resistance between soil particles because of the increase in the thickness of the water film on the surface of soil particles and the thermal conductivity of the heat transfer medium between particles, thus changing the thermal properties of soils.

Comparison of single and dual probes for measuring soil thermal properties with transient heating

Soil Research ◽  
1994 ◽  
Vol 32 (3) ◽  
pp. 447 ◽  
Author(s):  
KL Bristow ◽  
RD White ◽  
GJ Kluitenberg
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Heat Pulse ◽  
Volumetric Heat Capacity ◽  
Transient Heating ◽  
Single Probe ◽  
Soil Thermal Properties ◽  
Dual Probe

Storage and transfer of heat in soils is governed by the soil thermal properties and these properties are therefore needed in many agricultural and engineering applications. In this paper we discuss solutions of the heat flow equation applicable to single and dual probe transient heating methods, and describe measurements made on air-dry sand to show how these methods can be used to obtain soil thermal properties. Measurements show that the two methods yield similar values of thermal conductivity. When determining thermal conductivity from the single probe data, it is best to use nonlinear curve fitting and to include a correction term in the model to account for the presence of the probe. Measurements of volumetric heat capacity made by using the dual probe heat-pulse method agreed well with independent estimates obtained using the de Vries method of summing the heat capacities of the soil constituents. The advantage of using the dual probe method together with the appropriate heat-pulse theory rather than the single probe is that all three soil thermal properties, the thermal diffusivity, volumetric heat capacity, and thermal conductivity, can be determined from a single heat-pulse measurement. Instantaneous heat-pulse theory can be used with the dual probe method to determine heat capacity from short duration heat-pulse data, but it should not be used to determine the thermal diffusivity and thermal conductivity.

Experimental Determination of Thermal Properties of Highly Viscous Liquids

2014 ◽  
Vol 1041 ◽  
pp. 39-42
Author(s):  
Petra Vojkůvková ◽  
Ondřej Šikula
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Experimental Determination ◽  
Direct Method ◽  
Energy Performance ◽  
Viscous Fluids ◽  
Heating And Cooling ◽  
Set Up

This contribution deals with experimental determination of thermal properties needed for transient heat transfer calculation by conduction in highly viscous fluids; which are the density, thermal conductivity and specific heat capacity. Density was determined by direct method, heat capacity was measured with mixing calorimeter and thermal conductivity was studied with two different measuring equipments. Experimental set up for determination of thermal conductivity was designed and constructed by the author. Results were corrected by numerical simulations in CalA software. All measurement quantities were compared with calculations based on the chemical composition of the substance. The determined thermal properties can be used for calculation of energy performance of heating and cooling of highly viscous fluids.

scholarly journals Transient method measured thermal properties of concrete with microspheres and latex based addition

2018 ◽  
Vol 196 ◽  
pp. 04037
Author(s):  
Roman Jaskulski ◽  
Wojciech Kubissa
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Fly Ash ◽  
Thermal Diffusivity ◽  
Thermal Conductivity Coefficient ◽  
Transient Method ◽  
Volumetric Heat Capacity

The goal of the performed research was to determine the influence of microspheres from fly ash and the latex based addition on the thermal properties of concrete. The tested additions were used in two different proportions each and they were combined with each other. As a reference two series of concrete were used: one without any addition and another with 0.2% of air entraining agent. The thermal properties were measured using transient method with ISOMET 2114 apparatus. No clear trends were observed in case of the results of the measurements of the thermal diffusivity and the volumetric heat capacity. While the results of the thermal conductivity coefficient show that both additions has a potential of lowering the thermal conductivity but they are not so efficient as air entraining agent.

Thermal conductivity, thermal diffusivity, and volumetric heat capacity of silicone elastomer nanocomposites

2017 ◽  
Vol 30 (3) ◽  
pp. 365-374 ◽  
Author(s):  
Govind Sahu ◽  
VK Gaba ◽  
S Panda ◽  
B Acharya ◽  
SP Mahapatra
Keyword(s):  
Electron Microscopy ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Temperature Response ◽  
Silicone Elastomer ◽  
Positive Temperature ◽  
Volumetric Heat Capacity ◽  
Multiwalled Carbon

Silicone elastomer (SiR) nanocomposites were prepared using multiwalled carbon nanotubes (MWCNT) and nano-graphite (NG). The morphology of the SiR nanocomposites has been studied using scanning electron microscopy and high-resolution transmission electron microscopy techniques. Detailed analysis of the morphology reveals a uniform distribution of the MWCNT and NG filler particles in the silicone matrix. On increasing the filler loading, a continuous network structure is formed and aggregation takes place. The effect of the MWCNT and NG loadings on the thermal properties of the silicone elastomer has been investigated. The thermal properties of the SiR nanocomposites were measured by a thermal properties analyzer based on the transient hot-wire method. Studies also suggest that incorporation of nanoparticles improves the thermal conductivity of SiR nanocomposites. The thermal conductivity of SiR nanocomposites increased from 0.200 W/(m K) to 0.440 W/(m K) and to 0.310 W/(m K) for 6 wt% MWCNT and NG loadings, respectively. Because of the positive temperature coefficient and the conductive nature of the nanoparticles, the thermal conductivity of the material increased on increasing the temperature. The thermal diffusivity and the volumetric heat capacity of the SiR nanocomposites were measured. The thermal diffusivity of the SiR nanocomposites increased from 0.1194 mm2/s to 0.3209 mm2/s and to 0.2050 mm2/s for 6 wt% MWCNT and NG loadings, respectively. This indicates that the temperature response becomes faster with MWCNT and NG loadings. The volumetric heat capacity of the silicone elastomer nanocomposites decreased from 1.80 MJ/(m3K) to 1.34 MJ/(m3K) and to 1.40 MJ/(m3K) for 6 wt% MWCNT and NG loadings, respectively. Thus, MWCNT particles are more effective in increasing the thermal conductivity and diffusivity of the SiR nanocomposites, when compared to NG fillers at any loading.

scholarly journals Thermal conductivity of aerated concrete (AC) composites containing micro-encapsulated phase change materials

2019 ◽  
Vol 282 ◽  
pp. 02033
Author(s):  
Shuai-Qi Tian ◽  
Ming-Liang Qu ◽  
Li-Wu Fan ◽  
Zi-Tao Yu ◽  
Jian Ge
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Phase Change ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Volumetric Heat Capacity ◽  
Liquid Phases ◽  
Aerated Concrete ◽  
Insulation Performance ◽  
Composite Samples

Aerated concrete (AC) was incorporated with micro-encapsulated phase change materials (PCMs) to form a novel PCM-composite AC with improved thermal storage capacity. RT25 paraffin was selected as the PCM and the composite materials were prepared by adding micro-encapsulated paraffin as an ingredient at various loadings. The effective thermal conductivity of the composite samples was measured at both 17 ºC and 35 ºC, while the paraffin was in solid and liquid phases, respectively. The volumetric heat capacity of the composites were also measured. Results showed that both the thermal conductivity and volumetric heat capacity increase upon adding the micro-encapsulated paraffin. However, they were found to decrease when further increase the paraffin loading. The maximum thermal conductivity and volumetric heat capacity were enhanced by approximately 35% and 30% when the paraffin loadings were 1% wt. and 3% wt., respectively. Since the increase of thermal conductivity leads to the deterioration of the thermal insulation performance, the composite samples with 3% wt. micro-encapsulated paraffin with lower thermal conductivity but the highest volumetric heat capacity was exhibited to be more appropriate.

scholarly journals Influence of Lightweight Aggregate Concrete Materials on Building Energy Performance

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 94
Author(s):  
Tara L. Cavalline ◽  
Jorge Gallegos ◽  
Reid W. Castrodale ◽  
Charles Freeman ◽  
Jerry Liner ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Building Materials ◽  
Energy Savings ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Building Energy ◽  
Energy Performance ◽  
Energy Simulation ◽  
Building Energy Simulation ◽  
Building Energy Performance

Due to their porous nature, lightweight aggregates have been shown to exhibit thermal properties that are advantageous when used in building materials such as lightweight concrete, grout, mortar, and concrete masonry units. Limited data exist on the thermal properties of materials that incorporate lightweight aggregate where the pore system has not been altered, and very few studies have been performed to quantify the building energy performance of structures constructed using lightweight building materials in commonly utilized structural and building envelope components. In this study, several lightweight concrete and masonry building materials were tested to determine the thermal properties of the bulk materials, providing more accurate inputs to building energy simulation than have previously been used. These properties were used in EnergyPlus building energy simulation models for several types of commercial structures for which materials containing lightweight aggregates are an alternative commonly considered for economic and aesthetic reasons. In a simple model, use of sand lightweight concrete resulted in prediction of 15–17% heating energy savings and 10% cooling energy savings, while use of all lightweight concrete resulted in prediction of approximately 35–40% heating energy savings and 30% cooling energy savings. In more complex EnergyPlus reference models, results indicated superior thermal performance of lightweight aggregate building materials in 48 of 50 building energy simulations. Predicted energy savings for the five models ranged from 0.2% to 6.4%.

Sign in / Sign up

Export Citation Format

Share Document