Method for Making Artificial Core Using Dry Cement as Cementing Agent

2014 ◽  
Vol 997 ◽  
pp. 387-391 ◽  
Author(s):  
Xian Ming Chen ◽  
Yong Zhang
Keyword(s):  
The Core ◽  
Saturated Water ◽  
Core Technology ◽  
Geological Conditions ◽  
Flow Experiment ◽  
Temperature And Pressure ◽  
Permeability Variation ◽  
Core Permeability ◽  
The Relationship ◽  
Cementing Agent

As the core and geological conditions is poor, it is difficult to get ideal cores for the laboratory flow experiment, especially for the weak bonding natural sandstone core and core resources affects the evaluation experiment. This paper describes the use of cement as cementing agent to make artificial sandstone core technology. Based on the principle of cementation solidifying when cement meets water in normal temperature and pressure conditions, using the cement as the cementing agent , contrasting different proportion of cement and core permeability to obtained the relationship curve . With the decrease of the proportion of cement, the cementation gradually weakened. When the ratio is less than 10 than 1, the core permeability variation in saturated water or not is certain, maintained at around 5%.

Study on Body Foundation of Brassiere Steel Ring Shapes

2011 ◽  
Vol 331 ◽  
pp. 101-104
Author(s):  
Su Zhen Liang
Keyword(s):  
Three Dimensional ◽  
Material Design ◽  
Pattern Design ◽  
Body Scanning ◽  
The Core ◽  
Female Breast ◽  
Core Technology ◽  
Breast Shape ◽  
Design And Manufacture ◽  
The Relationship

The pattern design of brassieres is the core technology for the design and manufacture of brassieres, while the female breast shape and part dimensions are the foundations for pattern design of brassieres. Based upon 3D body scanning, this paper studied the relationship between the breast root shape and the steel ring by considering the features of the pattern design of the brassiere. It concludes that the breast root girth is a complicated three-dimensional curve; it’s inappropriate for the neighboring size’s brassieres to adopt the steel ring with the same specification; the material design of the steel ring should be moderate. The purpose is to provide human body basis for pattern design of brassieres and achieve more standard and scientific pattern design of the brassiere by the underwear enterprises.

ESEM - A multipurpose surface Electron Microscope

1986 ◽  
Vol 44 ◽  
pp. 632-633 ◽  
Author(s):  
G.D. Danilatos
Keyword(s):  
Electron Microscope ◽  
Room Temperature ◽  
Environmental Scanning ◽  
Gas Composition ◽  
Saturated Water Vapor ◽  
Surface Electron ◽  
Current State ◽  
Saturated Water ◽  
New Type ◽  
Temperature And Pressure

Over recent years a new type of electron microscope - the environmental scanning electron microscope (ESEM) - has been developed for the examination of specimen surfaces in the presence of gases. A detailed series of reports on the system has appeared elsewhere. A review summary of the current state and potential of the system is presented here.The gas composition, temperature and pressure can be varied in the specimen chamber of the ESEM. With air, the pressure can be up to one atmosphere (about 1000 mbar). Environments with fully saturated water vapor only at room temperature (20-30 mbar) can be easily maintained whilst liquid water or other solutions, together with uncoated specimens, can be imaged routinely during various applications.

Ludwig Mayer, a prominent collector of minerals and his collection in the National Museum in Prague

2018 ◽  
Vol 187 (1) ◽  
pp. 65-84
Author(s):  
Miroslav Radoň ◽  
Dalibor Velebil
Keyword(s):  
National Museum ◽  
The Core ◽  
Geological Conditions ◽  
Central Highlands

Ludwig Mayer (*1879, †?) was an significant collector of minerals from Bílina near Teplice. He personally searched minerals in terrain. He also purchased large amount of minerals from dealers or exchanged with other collectors. He deserved a number of interesting or completely new mineralogical findings, which were enriching the overall knowledge of mineralogical conditions of the Bohemian Central Highlands. Many of his findings were published by profesor Josef Emanuel Hibsch (*1852, †1940), the greatest expert on geological conditions of the Bohemian Central Highlands. From 1939 to 1945 Mayer was the manager of geological collections of the museum in Teplice. A total of 596 pieces of minerals from the Mayer’s collection came to the systematic part of the mineralogical collection of the National Museum in Prague. The core of this amount consists of documentary valuable minerals from several important mineralogical sites of the Central Bohemian Highlands, such as Dolní Zálezly, Církvice, Mariánská Rock in Ústí nad Labem, Radejčín and new site Chudoslavice with yellow crystals of chabazite, discovered by Mayer. A total of 54 samples of minerals from the Mayer collection were selected for the newly prepared permanent exhibition of minerals of the National Museum in Prague.

In a word, I’ve been there

2019 ◽  
pp. 246-256
Author(s):  
A. K. Zholkovsky
Keyword(s):  
The State ◽  
Female Characters ◽  
Political Situation ◽  
The Core ◽  
The Relationship ◽  
Core Problem ◽  
Typical Solution

In his article, A. Zholkovsky discusses the contemporary detective mini-series Otlichnitsa [A Straight-A Student], which mentions O. Mandelstam’s poem for children A Galosh [Kalosha]: more than a fleeting mention, this poem prompts the characters and viewers alike to solve the mystery of its authorship. According to the show’s plot, the fact that Mandelstam penned the poem surfaces when one of the female characters confesses her involvement in his arrest. Examining this episode, Zholkovsky seeks structural parallels with the show in V. Aksyonov’s Overstocked Packaging Barrels [Zatovarennaya bochkotara] and even in B. Pasternak’s Doctor Zhivago [Doktor Zhivago]: in each of those, a member of the Soviet intelligentsia who has developed a real fascination with some unique but unattainable object is shocked to realize that the establishment have long enjoyed this exotic object without restrictions. We observe, therefore, a typical solution to the core problem of the Soviet, and more broadly, Russian cultural-political situation: the relationship between the intelligentsia and the state, and the resolution is not a confrontation, but reconciliation.

The relationship of magnates and the szlachta of the Great Principality/Grand Duchy of Lithuania with Russia in 1733

2020 ◽  
Author(s):  
А.В. Мацук
Keyword(s):  
Free Choice ◽  
Russian Empire ◽  
The Core ◽  
The Russian Empire ◽  
Grand Duchy Of Lithuania ◽  
Relationship Of ◽  
The Relationship ◽  
Grand Duchy

В статье исследуются события бескоролевья 1733 г. в Речи Посполитой. Согласно «трактату Левенвольде» компромиссным кандидатом на избрание монархом Речи Посполитой был португальский инфант дон Мануэль, которого предложила Австрия. Россия больше склонялась к кандидатуре «пяста». Россия оказалась не подготовленной к началу бескоролевья. Бывшие российские союзники магнаты ВКЛ рассорились с российским послом Фридрихом Казимиром Левенвольде и перешли на сторону Франции. В конце февраля 1733 г. в ВКЛ направили Юрия Ливена, который от имени российской царицы предложил поддержку в получении короны Михаилу Вишневецкому и Павлу Сангушке. Принятое на конвокационном сейме решение об избрании королем «пяста» и католика показало популярность Станислава Лещинского. В результате вслед за Австрией Россия поддержала кандидатом на корону Фридриха Августа. Магнаты ВКЛ до последнего оставались конкурентами о короне. Оппозиция Лещинскому объединилась под лозунгом защиты «вольного выбора» и поэтому в ней остались кандидаты «пясты», которые не могли уступить друг другу, и согласились на компромисс – кандидатуру Фридриха Августа. Для противодействия возможному избранию Лещинского Россия создала в ВКЛ новоградскую конфедерацию. Ее организатором стал новоградский воевода Николай Фаустин Радзивилл. Эта конфедерация становится основой Генеральной Варшавской конфедерации, которая 5 октября 1733 г. избирает королем саксонского курфюрста. The article examines the events of the «kingless» year of 1733 in the Polish-Lithuanian Commonwealth. According to the Levenwolde Treaties the compromise candidate for the Commonwealth’s throne was the Portuguese Infante Don Manuel, who’s candidacy was proposed by Austria. Russia, in turn, leaned towards the «pyasta» candidate. The Russian Empire was clearly unprepared for the start of the kingless period. Russia’s former allies – magnates of the Grand Duchy of Lithuania – came into conflict with the Russian ambassador Frederick Kazimir Levenwolde and sided with France. In late February of 1733, Empress Anna Ioanovna of Russia sent Yuri Liven to the Grand Duchy of Lithuania, who offered official support in the struggle for the crown to Mikhail Vishnevetsky and Pavel Sangushka. The electoral decision made at the Sejm proved the popularity of the «pyast» and Catholic candidates, specifically – Stanislaus Leschinsky. In turn, Russia – following Austria – showed its support for the candidacy of Frederick August. The magnates of the Grand Duchy of Lithuania remained in opposition in the crown issue until the very last. Opposition to Leschinsky was united under the motto of «free choice». For that reason, it was comprised of «pyasta» candidates, who were in a deadlock with one another, and were now ready for the compromise candidacy of Frederick Augustus. In order to counter the possible election of Leschinsky, Russia created the Novograd Confederation in the Grand Duchy of Lithuania. It was organized by the Novograd Voevoda Faustin Radzivill. This confederation became the core of the General Warsaw Confederation that – on October 5th 1733 – elected the Saxon King to the throne of the Polish-Lithuanian Commonwealth.

All Hail to the Archpriest

2019 ◽  
Author(s):  
Peter Lake ◽  
Michael Questier
Keyword(s):  
Seventeenth Century ◽  
Church And State ◽  
Good Deal ◽  
The Core ◽  
Public Argument ◽  
The Relationship ◽  
Public Politics

This volume revisits the debates and disputes known collectively in the literature on late sixteenth- and early seventeenth-century England as the ‘Archpriest Controversy’. We argue that this was an extraordinary instance of the conduct of contemporary public politics and that, in its apparent strangeness, it is in fact a guide to the ways in which contemporaries negotiated the unstable later Reformation settlement in England. The published texts which form the core of the arguments involved in this debate survive, as do several caches of manuscript material generated by the dispute. Together they tell us a good deal about the aspirations of the writers and the networks that they inhabited. They also allow us to retell the progress of the dispute both as a narrative and as an instance of contemporary public argument about topics such as the increasingly imminent royal succession, late Elizabethan puritanism, and the function of episcopacy. Our contention is that, if one takes this material seriously, it is very hard to sustain standard accounts of the accession of James VI in England as part of an almost seamless continuity of royal government, contextualized by a virtually untroubled and consensus-based Protestant account of the relationship between Church and State. Nor is it possible to maintain that by the end of Elizabeth’s reign the fraction of the national Church, separatist and otherwise, which regarded itself or was regarded by others as Catholic had been driven into irrelevance.

A realistic model for transverse shear stiffness prediction of composite corrugated-core sandwich structure with bonding effect

2021 ◽  
pp. 109963622199386
Author(s):  
Tianshu Wang ◽  
Licheng Guo
Keyword(s):  
Present Model ◽  
Shear Stiffness ◽  
Realistic Model ◽  
Torsional Stiffness ◽  
Fem Model ◽  
The Core ◽  
Bonding Effect ◽  
Stiffness Model ◽  
Bonding Area ◽  
The Relationship

In this paper, a shear stiffness model for corrugated-core sandwich structures is proposed. The bonding area is discussed independently. The core is thought to be hinged on the skins with torsional stiffness. The analytical model was verified by FEM solution. Compared with the previous studies, the new model can predict the valley point of the shear stiffness at which the relationship between the shear stiffness and the angle of the core changes from negative correlation to positive correlation. The valley point increases when the core becomes stronger. For the structure with a angle of the core smaller than counterpart for the valley point, the existing analytical formulations may significantly underestimate the shear stiffness of the structure with strong skins. The results obtained by some previous models may be only 10 persent of that of the present model, which is supported by the FEM model.

Desire for Self-healing

2017 ◽  
Vol 12 (1-2) ◽  
pp. 317-335
Author(s):  
Ngar-sze Lau
Keyword(s):  
Theravada Buddhism ◽  
Self Healing ◽  
Core Knowledge ◽  
The Third ◽  
The Core ◽  
Physical Suffering ◽  
Mind And Body ◽  
Core Practice ◽  
The Relationship ◽  
Contemporary Chinese

Abstract This practice report describes how Chinese meditators understand the “four foundations of mindfulness” (satipaṭṭhāna, sinianzhu 四念住) as a remedy for both mental and physical suffering. In the tradition of Theravāda Buddhism, satipaṭṭhāna is particularly recognized as the core knowledge for understanding the relationship between mind and body, and the core practice leading to liberation from suffering. Based on interviews with Chinese meditation practitioners, this study develops three main themes concerning how they have alleviated afflictions through the practice of satipaṭṭhāna. The first theme highlights how practitioners learn to overcome meditation difficulties with “right attitude.” The second theme is about practicing awareness with “six sense doors” open in order to facilitate the balance of the “five faculties.” The third theme explores how practitioners cultivate daily life practice through an understanding of the nature of mind and body as impermanent and as not-self. This paper details how these themes and embodied practices of satipaṭṭhāna constitute ways of self-healing for urban educated Buddhists in the contemporary Chinese context.

A New Algorithm to Reduce PAPR in STBC MIMO-OFDM System

2013 ◽  
Vol 760-762 ◽  
pp. 190-193
Author(s):  
Ya Jing Wang ◽  
Ya Zhen Li ◽  
Jing Guan
Keyword(s):  
Ofdm System ◽  
The Core ◽  
Use Of Time ◽  
Time Space ◽  
Core Technology ◽  
Mimo Ofdm ◽  
Papr Performance ◽  
And Inversion ◽  
Development Prospects ◽  
Great Development

MIMO and OFDM technology is the core technology of 4G network, and have great development prospects. The main drawback of MIMO-OFDM system is the high PAPR. This paper is based on Cross-antenna rotation and inversion and Active Constellation Extension. The paper proposed the joint algorithm to reduce PAPR in STBC MIMO-OFDM system. It makes use of time, space and frequency freedom to improve the PAPR performance. The simulation results show that the joint algorithm can effectively reduce the PAPR value and do not increase the bit error rate in STBC MIMO-OFDM system.

scholarly journals Phenotyping plants: genes, phenes and machines

2012 ◽  
Vol 39 (11) ◽  
pp. 813 ◽  
Author(s):  
Roland Pieruschka ◽  
Hendrik Poorter
Keyword(s):  
Structural Information ◽  
Plant Phenotyping ◽  
Phenotypic Traits ◽  
Special Issue ◽  
Non Invasive ◽  
The Core ◽  
The Relationship ◽  
Non Destructive ◽  
Major Progress ◽  
Meaningful Data

No matter how fascinating the discoveries in the field of molecular biology are, in the end it is the phenotype that matters. In this paper we pay attention to various aspects of plant phenotyping. The challenges to unravel the relationship between genotype and phenotype are discussed, as well as the case where ‘plants do not have a phenotype’. More emphasis has to be placed on automation to match the increased output in the molecular sciences with analysis of relevant traits under laboratory, greenhouse and field conditions. Currently, non-destructive measurements with cameras are becoming widely used to assess plant structural properties, but a wider range of non-invasive approaches and evaluation tools has to be developed to combine physiologically meaningful data with structural information of plants. Another field requiring major progress is the handling and processing of data. A better e-infrastructure will enable easier establishment of links between phenotypic traits and genetic data. In the final part of this paper we briefly introduce the range of contributions that form the core of a special issue of this journal on plant phenotyping.

Sign in / Sign up

Export Citation Format

Share Document