Investigation of Thermal, Mechanical and Acoustic Performance of Bio-Materials Based on Plaster-Gypsum and Cork

2022 ◽  
Author(s):  
Said Bouzit ◽  
Francesca Merli ◽  
Mohammed Sonebi ◽  
Sofiane Amziane ◽  
Cinzia Buratti ◽  
...  
Keyword(s):  
Building Materials ◽  
Transmission Loss ◽  
Energy Performance ◽  
Building Envelope ◽  
Acoustic Properties ◽  
Acoustic Performance ◽  
Energy Performance Of Buildings ◽  
New Applications ◽  
Alternative Solutions ◽  
Selection Of

The building sector is one of the biggest consumers of energy in the world and it is pushing the scientific community to find various alternative solutions to solve the problem of thermal insulation of buildings. Therefore, the selection of appropriate building materials is a major challenge for improving the thermal comfort and energy performance of buildings. In this scenario, the interest of plaster-based composites as insulating materials increases, in particular for new applications, as insulators for the building envelope, and this deserves to be studied. In this investigation, new plaster-based composites with cork were produced and tested at lab scale, in order to obtain cheap solutions with improved thermo-physical and acoustic performance. The results show that it is possible to improve the thermal, mechanical, and acoustic performance of construction biomaterials by using plaster as a binder and cork as a natural reinforcement: thermal conductivity was equal to 0.097 W/m.K, the compressive strength to about 2.30 MPa, and the transmission loss to about 40 dB. Keywords: Plaster-Gypsum; Cork; Thermal, Mechanical and Acoustic Properties.

scholarly journals Elaboration and Characterization of Composite Materials Based on Plaster-Gypsum and Mineral Additives for Energy Efficiency in Buildings

Proceedings ◽  
2019 ◽  
Vol 34 (1) ◽  
pp. 22
Author(s):  
Bouzit ◽  
Taha
Keyword(s):  
Thermal Conductivity ◽  
Energy Efficiency ◽  
Composite Materials ◽  
Building Material ◽  
Building Materials ◽  
Building Envelope ◽  
Acoustic Properties ◽  
Building Sector ◽  
Acoustic Performance ◽  
Mineral Additives

The building sector is one of the largest energy consumers in the world, prompting scientific researchers to find solutions to the problem. The choice of appropriate building materials presents a considerable challenge for improving the thermal comfort of buildings. In this scenario, plaster-based insulating materials have more and more interests and new applications, such as insulating coatings developing the building envelope. Several works are being done to improve energy efficiency in the building sector through the study of building materials with insulation quality and energy savings. In this work, new composite materials, plaster-gypsum with mineral additives are produced and evaluated experimentally to obtain low-cost materials with improved thermo-physical and acoustic properties. The resulting composites are intended for use in building walls. Plaster-gypsum is presented as a high-performance thermal material, and mineral additives are of great importance because of their nature and are environmentally friendly. Measurements of thermal properties are carried and measurements of acoustic properties. The results show that it is possible to improve the thermal and acoustic performance of building material by using plaster as a base material and by incorporating thermal insulators. The thermal conductivity of plaster alone is greater than that of plaster with mineral additives, offer interesting thermal and acoustic performance. By varying the additives, the thermal conductivity changes. Finally, comparing the results, plaster with mineral additives is considered the best building material in this study

Energy Saving Technology for Doors and Windows of the Building

2014 ◽  
Vol 1056 ◽  
pp. 128-130
Author(s):  
Fu Yun Yang
Keyword(s):  
Energy Saving ◽  
Indoor Environment ◽  
Energy Performance ◽  
Building Envelope ◽  
Energy Performance Of Buildings ◽  
Summer Heat ◽  
Energy Saving Technology ◽  
Heat Preservation

Doors and windows of the building is an important part of the building envelope. AS the transparent and open envelope of the building, doors and windowsare the weakest part in the winter and summer heat preservation. It directly affects the energy performance of buildings. Therefore, do a good job of building doors and windows energy saving is an important way to optimize the indoor environment and realize energy saving.

scholarly journals Thermal Imaging for Detection of Defects in Envelopes of Buildings in Use: Qualitative and Quantitative Analysis of Building Energy Performance

2018 ◽  
Author(s):  
Anna Ostańska
Keyword(s):  
Quantitative Analysis ◽  
Thermal Imaging ◽  
Building Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Qualitative And Quantitative Analysis ◽  
Infrared Images ◽  
Building Energy Performance ◽  
Qualitative And Quantitative ◽  
Energy Performance Of Buildings

The proposed interdisciplinary method of identifying defects in the building envelope insulation enables the user to quickly assess the scale of heat loss problems in occupied buildings. The method rests upon the quantitative analysis of macroscopic infrared images of the buildings. The method was applied in practice to assess effects of thermal upgrade project in Dźbów housing estate in Częstochowa, a city located in southern Poland. The results confirmed the applicability of the method to monitoring energy performance of buildings in use without intervention into the building’s fabric and without disturbing the occupants.

The Statistical Verification of Significance of Airtightness and Energy Performance

2015 ◽  
Vol 789-790 ◽  
pp. 1181-1184
Author(s):  
Michal Kraus ◽  
Kateřina Kubeková ◽  
Darja Kubečková
Keyword(s):  
Energy Demand ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Key Factors ◽  
Energy Performance Of Buildings ◽  
Energy Efficient Buildings ◽  
Statistical Verification ◽  
Low Energy Consumption

The main objective of the paper is to confirm or exclude a statistically significant impact of airtightness on the energy performance of buildings. Energy performance of buildings is characterized by a specific energy demand for heating and specific total primary energy. Airtightness is one of the key factors of energy efficient buildings. The quality of airtight building envelope except for low energy consumption also minimizes the risk of damage to the structure associated with the spread of the heat and water vapor in the structure.

Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load

2014 ◽  
Vol 564 ◽  
pp. 315-320 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Mahmoud Tahat
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Energy Performance ◽  
Building Envelope ◽  
Insulation Material ◽  
Cooling Load ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Energy Performance Of Buildings ◽  
The Impact

The impact of the thermal conductivity (k-value) change of polystyrene insulation material in building envelope due to changes in temperature on the thermal and energy performance of a typical residential building under hot climate is investigated. Indeed, the thermal and energy performance of buildings depends on the thermal characteristics of the building envelope, and particularly on the thermal resistance of the insulation material used. The thermal insulation material which is determined by its thermal conductivity, which describes the ability of heat to flow cross the material in presence of a gradient of temperature, is the main key to assess the performance of the thermal insulation material. When performing the energy analysis or calculating the cooling load for buildings, we use published values of thermal conductivity of insulation materials, which are normally evaluated at 24°C according to the ASTM standards. In reality, thermal insulation in building is exposed to significant and continuous temperature variations, due essentially to the change of outdoor air temperature and solar radiation. Many types of insulation materials are produced and used in Oman, but not enough information is available to evaluate their performance under the prevailing climatic condition. The main objective of this study is to investigate the relationship between the temperature and thermal conductivity of various densities of polystyrene, which is widely used as building insulation material in Oman. Moreover, the impact of thermal conductivity variation with temperature on the envelope-induced cooling load for a simple building model is discussed. This work will serve as a platform to investigate the effect of the operating temperature on thermal conductivity of other building material insulations, and leads to more accurate assessment of the thermal and energy performance of buildings in Oman.

scholarly journals Circularity concepts for offsite prefabricated energy renovation of apartment buildings

2021 ◽  
Vol 2069 (1) ◽  
pp. 012074
Author(s):  
Kalle Kuusk ◽  
Kristel Kullerkupp ◽  
Peep Pihelo ◽  
Michiel Ritzen ◽  
Ana Tisov ◽  
...  
Keyword(s):  
Window Glass ◽  
Energy Performance ◽  
Building Envelope ◽  
Full Potential ◽  
Careful Selection ◽  
Thermal Transmittance ◽  
Building Component ◽  
Materials Used ◽  
Good Possibility ◽  
Selection Of

Abstract Deep energy renovation includes the realisation of the full potential of energy performance. A circular deep renovation, which contributes to a circular built environment, is based on 100% life cycle renewable energy, and all materials used within the system boundaries are part of infinite technical or biological cycles with the lowest quality loss as possible. In the current study, the circularity potential was assessed for deep energy renovation from different aspects: circularity of materials, building component and building structure. Careful selection of materials as well as connection, position and disassembly possibilities are needed to increase the degree of circularity. This shows a good possibility to increase energy performance by using circularity principles. The window glass circularity analyse showed that, at best, the thermal transmittance of a new circular product can be more than three times lower than the original. The circular use of materials, components, and structures pose new challenges for the building physic design of building envelope structures.

Link between Acoustic and Hygrothermal Behavior of Hemp Shiv and Pith Composites

2022 ◽  
Author(s):  
Mohamed Said Abbas ◽  
Antonin Fabbri ◽  
Mohammed Yacine Ferroukhi ◽  
Philippe Glé ◽  
Emmanuel Gourdon ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Transmission Loss ◽  
Construction Materials ◽  
Acoustic Properties ◽  
Geometrical Parameters ◽  
Acoustic Performance ◽  
Hygrothermal Behavior ◽  
Interparticle Porosity ◽  
Hemp Shiv ◽  
Conductivity Models

Bio-based materials are an environmentally friendly alternative to classic construction materials, yet their generally low density can lead to poor acoustic properties. The acoustic performance of hemp shiv and sunflower pith composites is therefore analyzed using Kundt’s tube. Although the loose aggregates present an exceptional sound absorbing behavior, it can be notably worsened in the presence of certain binders. The Transmission Loss is nevertheless enhanced by the binders, although it does not exceed 20 dB in most cases. For both properties, the type of binder has been found to be the most influential parameter. Through the Kundt’s tube method, it is also possible to determine the geometrical parameters of the composites’ microstructure, which have been observed to be similar for materials presenting comparable hygrothermal properties and containing the same binder. In a previous work, an experimental correlation was found between the thermal conductivity and the interparticle porosity of the aforementioned composites, which is compared to theoretical thermal conductivity models from literature without finding any apparent correspondence.

Sensitivity Study on the Parameters of a Hygrothermal Transfer Model of Air, Heat and Mass Transfer

2022 ◽  
Author(s):  
Salah Ouldboukhitine ◽  
Sofiane Amziane ◽  
Maroua Benkhaled
Keyword(s):  
Mass Transfer ◽  
Sustainable Development ◽  
Energy Consumption ◽  
Energy Performance ◽  
Sensitivity Study ◽  
Building Envelope ◽  
Transfer Model ◽  
Transfer Processes ◽  
Energy Performance Of Buildings ◽  
Final Energy Consumption

The energy performance of buildings represents a major challenge in terms of sustainable development. The buildings and buildings construction sectors combined are responsible for over one-third of global final energy consumption and nearly 40% of total direct and indirect CO2 emissions. In order to reduce the energy consumption of buildings and their harmful impact on the environment, special attention has been paid in recent years to the use of bio-based materials. Several works have been carried out in the last decades in order to model the coupled heat, air and moisture transfers in the building envelope but the difficulties lies in the identification of numerous parameters that the HAM proposed models use. In the present paper, a sensitivity study regarding the HAM parameters is implemented in order to apprehend the most determining parameters during the transfer processes. A reduced model based on these parameters is then determined.

Acoustic performance analysis of Helmholtz resonators with conical necks and its application

2019 ◽  
Vol 67 (3) ◽  
pp. 155-167 ◽  
Author(s):  
Haitao Liu
Keyword(s):  
Finite Element ◽  
Prediction Model ◽  
Transmission Loss ◽  
Low Frequency ◽  
Wide Band ◽  
Acoustic Properties ◽  
Frequency Range ◽  
Acoustic Attenuation ◽  
Acoustic Performance ◽  
Helmholtz Resonators

The acoustic properties of the Helmholtz resonators with conical necks, which have broad acoustic attenuation band performance in the low frequency range, are investigated in this study. In order to investigate its wide-band acoustic attenuation mechanism, three-dimensional finite element models for the Helmholtz resonators with different necks are built respectively. The acoustic performance prediction model based on the one-dimensional analytical approach with acoustic length corrections is built to calculate the transmission loss results more efficiently, and the formula for calculating the resonance frequency is also derived. Then, the prediction model and the formula are verified by finite element method and experiment, which show good agreements. As a result, the prediction model is applied to analyze the sound attenuation properties of the Helmholtz resonators with conical necks, and the results show that the acoustic attenuation bandwidth in the low frequency range is improved by increasing the taper angle of the neck. At last, the approaches for the Helmholtz resonators with conical necks are applied to design an actual middle silencer of a passenger car. The results show that the designed middle silencer performs much better than the original one, which can effectively eliminate the exhaust order noise to meet the standard of exhaust noise control. The test results fully reveal that the Helmholtz resonators with conical necks in the muffler can play a better role in eliminating exhaust order noise, and the approaches proposed in this article can effectively guide the design of Helmholtz resonators with conical necks.

Sign in / Sign up

Export Citation Format

Share Document