Thermal Conductivity Impact on Thermal Stability of Reactive Materials

2017 ◽  
Vol 11 ◽  
pp. 1-10 ◽  
Author(s):  
Ramoshweu Solomon Lebelo
Keyword(s):  
Thermal Conductivity ◽  
Thermal Stability ◽  
Nonlinear Partial Differential Equations ◽  
Variable Thermal Conductivity ◽  
Spontaneous Ignition ◽  
Combustible Material ◽  
Temperature Oxidation ◽  
Exothermic Chemical Reaction ◽  
The Impact ◽  
Thermal Stability Of

The impact of thermal conductivity on the thermal stability of a combustible material is studied in a stockpile modelled in a long cylindrical pipe. Two combustible material systems, one with constant thermal conductivity, the other one with variable thermal conductivity, are compared to analyse thermal stability in each case. A combustible material is the one that contains carbons or hydrocarbons that readily react with the oxygen of the system. Low-temperature oxidation or exothermic chemical reaction is the primary cause of spontaneous ignition. This is a theoretical study that involves mathematical approach to do the investigation. The nonlinear partial differential equations for heat transfer are solved numerically using the Finite Difference Method (FDM). Effects of embedded kinetic parameters on the temperature of the system are depicted graphically and discussed accordingly.

Radiation and Thermal Decomposition Analysis in a Reactive Slab of Variable Thermal Conductivity.

2018 ◽  
Vol 7 (3.19) ◽  
pp. 27
Author(s):  
RS Lebelo ◽  
KS Moloi ◽  
CC Chitumwa ◽  
SO Adesanya
Keyword(s):  
Thermal Conductivity ◽  
Heat Loss ◽  
Chemical Reaction ◽  
Co2 Emission ◽  
Combustion Process ◽  
Decomposition Analysis ◽  
Variable Thermal Conductivity ◽  
Radiative Heat Loss ◽  
Exothermic Chemical Reaction ◽  
The Impact

In this article, the impact of radiative heat loss in a stockpile of combustible material is investigated. The heat loss is attributed to the exothermic chemical reaction when the carbon containing material of the stockpile reacts automatically with the oxygen trapped within the stockpile. The study is modelled in a rectangular slab of thermal conductivity that varies with the temperature and loses heat to the surrounding environment by radiation. The differential equations governing the problem are solved numerically using the Runge-Kutta-Fehlberg (RKF) method coupled with the Shooting technique. The effect of each embedded kinetic parameter on the temperature, oxygen (O2) depletion and carbon dioxide (CO2) emission, is analyzed and the results are graphically expressed and discussed accordingly. The results show that the kinetic parameters which enhance the exothermic chemical reaction correspondingly increase the temperature and the CO2 emission during the combustion process, and in turn, these parameters also increase the depletion of O2.  

Evaluation of the Impact of Fatty Acid Methyl Ester (FAME) Contamination on the Thermal Stability of Jet A

2013 ◽  
Author(s):  
Jr Morris ◽  
Shardo Robert W. ◽  
Higgins James ◽  
Cook Kim ◽  
Tanner Rhonda ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
The Impact ◽  
Thermal Stability Of

scholarly journals Numerical simulation of variable thermal conductivity on 3D flow of nanofluid over a stretching sheet

2020 ◽  
Vol 9 (1) ◽  
pp. 233-243 ◽  
Author(s):  
Nainaru Tarakaramu ◽  
P.V. Satya Narayana ◽  
Bhumarapu Venkateswarlu
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Stretching Sheet ◽  
Three Dimensional ◽  
Variable Thermal Conductivity ◽  
Normal Velocity ◽  
Transfer Coefficients ◽  
Similarity Transformations ◽  
Frictional Coefficients ◽  
The Impact

AbstractThe present investigation deals with the steady three-dimensional flow and heat transfer of nanofluids due to stretching sheet in the presence of magnetic field and heat source. Three types of water based nanoparticles namely, copper (Cu), aluminium oxide (Al2O3), and titanium dioxide (TiO2) are considered in this study. The temperature dependent variable thermal conductivity and thermal radiation has been introduced in the energy equation. Using suitable similarity transformations the dimensional non-linear expressions are converted into dimensionless system and are then solved numerically by Runge-Kutta-Fehlberg scheme along with well-known shooting technique. The impact of various flow parameters on axial and transverse velocities, temperature, surface frictional coefficients and rate of heat transfer coefficients are visualized both in qualitative and quantitative manners in the vicinity of stretching sheet. The results reviled that the temperature and velocity of the fluid rise with increasing values of variable thermal conductivity parameter. Also, the temperature and normal velocity of the fluid in case of Cu-water nanoparticles is more than that of Al2O3- water nanofluid. On the other hand, the axial velocity of the fluid in case of Al2O3- water nanofluid is more than that of TiO2nanoparticles. In addition, the current outcomes are matched with the previously published consequences and initiate to be a good contract as a limiting sense.

High partial thermal conductivity of luminescence sites: a crucial factor for reducing the heat-induced lowering of the luminescence efficiency

2021 ◽  
Author(s):  
Ni Luo ◽  
Jing Xu ◽  
Xiyue Cheng ◽  
ZhenHua Li ◽  
Yidong Huang ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Stability ◽  
Practical Applications ◽  
Good Thermal Stability ◽  
The Past ◽  
Luminescence Efficiency ◽  
Thermal Stability Of

The good thermal stability of a phosphor is crucial for its practical applications. Unfortunately, in the past decades, only Gurney-Mott equation was available to describe the relation between the luminescence...

scholarly journals The Impact of Variable Thermal Conductivity of Insulation Materials on the Building Energy Performance in Hot Climate

2019 ◽  
Vol 103 ◽  
pp. 02001 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Ahmed Hassan ◽  
Shaimaa Abdelbaqi
Keyword(s):  
Thermal Conductivity ◽  
Energy Performance ◽  
Variable Thermal Conductivity ◽  
Transfer Model ◽  
Ambient Conditions ◽  
K Value ◽  
Hot Climate ◽  
Building Wall ◽  
Wall Assembly ◽  
The Impact

This paper illustrates the impact of embedding an insulation layer of variable thermal conductivity in a typical building wall on the cooling effect and energy performance. The evaluation was performed by applying a conjugate heat transfer model, which was tested in extremely hot conditions of Al Ain (UAE). The thermal performance of a building incorporating insulation layers of variable thermal conductivity (k-value) was compared to a non-variable thermal conductivity system by quantifying the additional heat transferred due to the k-relationship with time. The results show that, when the k-value is a function of operating temperature, its effects on the temperature profile through the wall assembly during daytime is significant compared with that obtained when a constant k-value for the polystyrene (EPS) insulation is adopted. A similar trend in the evolution of temperatures during the day and across the wall section was observed when EPS material with different moisture content was evaluated. For the polyurethane insulation, the inner surface temperature reached 44 °C when constant k-value was adopted, increasing to 48.5 °C when the k-value was allowed to vary under the same ambient conditions.

scholarly journals Heat loss analysis in a radiating slab of variable thermal conductivity

2018 ◽  
Vol 7 (2.23) ◽  
pp. 228 ◽  
Author(s):  
Ramoshweu S. Lebelo ◽  
Kholeka C. Moloi
Keyword(s):  
Differential Equation ◽  
Thermal Conductivity ◽  
Chemical Reaction ◽  
Combustion Process ◽  
Variable Thermal Conductivity ◽  
Temperature Profiles ◽  
Reactive Material ◽  
Loss Analysis ◽  
Exothermic Chemical Reaction ◽  
Rectangular Slab

This article investigates the transfer of heat in a stockpile of reactive materials, that is assumed to lose heat to the environment by radiation. The study is modeled in a rectangular slab whose materials are of variable thermal conductivity. The stockpile’s reactive material in this context is one that readily reacts with the oxygen trapped within the stockpile due to exothermic chemical reaction. The study of the combustion process in this case is conducted theoretically by using the Mathematical approach. The differential equation governing the problem is tackled numerically by applying the Runge-Kutta Fehlberg (RKF45) method coupled with the Shooting technique. To investigate the heat transfer phenomena, some kinetic parameters embedded in the governing differential equation, are varied to observe the behavior of the temperature profiles during the combustion process. The results obtained from the temperature profiles, are depicted graphically and discussed accordingly. It was discovered that kinetic phenomena such as the reaction rate parameter, accelerates the exothermic chemical reaction. However, the radiation parameter decelerates the exothermic chemical reaction by lowering the temperature profiles.  

Sign in / Sign up

Export Citation Format

Share Document