An Efficient Method to Completely Remove Catalyst Particles from HiPCO Single Walled Carbon Nanotubes

2018 ◽  
Vol 53 ◽  
pp. 64-75 ◽  
Author(s):  
M. Anto Godwin ◽  
Aparna Basavaraja Allannavar ◽  
Sarika Joshi ◽  
Gadhadar Reddy ◽  
S.S. Abhishek ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Acid Treatment ◽  
Catalyst Particle ◽  
Single Walled Carbon Nanotubes ◽  
Easy Method ◽  
Single Walled Carbon ◽  
Carbon Impurities ◽  
Transmission Electron ◽  
Treated Sample ◽  
Walled Carbon Nanotubes

An efficient, economic and easy method for removing 99% of catalyst particle from high pressure carbon monoxide (HiPCO) single walled carbon nanotubes (SWCNT) is reported. The experiment is carried out at low temperature followed by acid treatment. The process exploited here is oxidation of the carbon impurities to gaseous phase as CO2and removal of oxidized catalyst debris using acid treatment. Stability of SWCNT at these temperatures does not allow any damage to the nanotubes, however, some damage is observed which can be attributed to the oxidation of catalyst particles and their removal. The purified sample showed very less/no amount of amorphous carbon and catalyst impurities. Characterization of the material was carried out using Raman spectroscopy, Thermogravimetric analysis (TGA), Scanning electron microscopy (SEM), Transmission electron microscope (TEM) and Energy Dispersive Spectroscopy (EDAX). The resultant SWCNT were found to be highly pure. EDAX spectroscopy showed that the purified sample had only 0.5wt% of catalyst impurities whereas the as prepared once have 9.09wt%, also, TGA curve of the treated sample showed a very significant increase in the oxidation temperature indicating less defect and less catalyst content in the sample. The non- carbonaceous residue after purification is about 0.3%. highly efficient purification of SWCNT using the proposed method. This work provides a basis on removing the catalyst particles completely.

Metal Coated Functionalized Single-Walled Carbon Nanotubes for Composites Application

2007 ◽  
Vol 561-565 ◽  
pp. 655-658 ◽  
Author(s):  
Qiang Zeng ◽  
Jennifer Luna ◽  
Y. Bayazitoglu ◽  
Kenneth Wilson ◽  
M. Ashraf Imam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Single Walled Carbon Nanotubes ◽  
Metal Composite ◽  
X Ray ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Nucleation Sites ◽  
Metal Composite Materials ◽  
Walled Carbon Nanotubes

This study is considered as a method for producing multifunctional metal composite materials by using Single-walled Carbon Nanotubes (SWNTs). In this research, various metals (Ni, Cu, Ag ) were successfully deposited onto the surface of SWNTs. It has been found that homogenous dispersion and dense nucleation sites are the necessary conditions to form uniform coating on SWNTs. Functionalization has been applied to achieve considerable improvement in the dispersion of purified single-walled carbon nanotubes. A three-step electroless plating approach was used and the coating mechanism is described in the paper. The samples were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The application of coated SWNTs in Titanium will be discussed in this paper.

Image Restoration of One-Dimensional HgTe Crystals Formed within Single Walled Carbon Nanotubes

2006 ◽  
Vol 514-516 ◽  
pp. 1131-1134
Author(s):  
Jeremy Sloan ◽  
Robin Carter ◽  
Angus I. Kirkland ◽  
Rüdiger R. Meyer ◽  
Alexis Vlandas ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Three Dimensional ◽  
Single Walled Carbon Nanotubes ◽  
One Dimensional ◽  
Single Walled Carbon ◽  
Semiconductor Crystals ◽  
Transmission Electron ◽  
Walled Carbon Nanotubes ◽  
Separate Crystal

Restored high resolution transmission electron microscopy (HRTEM) images have been recorded from 1D semiconductor crystals formed within narrow diameter (ca. 1.4 nm) single walled carbon nanotubes (SWNTs). Two unique projections were obtained from separate crystal fragments encapsulated within separate nanotubes that has facilitated the reconstruction of the three dimensional arrangement of atoms within the two encapsulated fragments.

Preparation of Single-Walled Carbon Nanotubes from Starch by Arc Discharge

2012 ◽  
Vol 454 ◽  
pp. 63-66
Author(s):  
Xia Yuan ◽  
Yu Liang An ◽  
Chen Zhang ◽  
Hong Chao Sui
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Arc Discharge ◽  
Single Walled Carbon Nanotubes ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Walled Carbon Nanotubes ◽  
Discharge Method ◽  
Scanning Electron

Single-walled carbon nanotubes (SWNTs) have been successfully prepared from starch by arc discharge technique. The SWNTs products were characterized by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The growth mechanism of the SWNTs was discussed in terms of the starch. The results demonstrate that starch is one of the suitable precursor for making SWNTs by arc discharge method.

scholarly journals STUDY OF THE NEAR INFRARED-MEDIATED HEATING OF DISPERSIONS OF PROTEIN-COATED PRISTINE AND CARBOXYLATED SINGLE-WALLED CARBON NANOTUBES

2012 ◽  
Vol 11 (05) ◽  
pp. 1250034
Author(s):  
ALEX T. SHEARDY ◽  
JEREMY J. TAYLOR ◽  
JENNIFER L. CHILEK ◽  
SYNYOUNG LI ◽  
RUHUNG WANG ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Tumor Cells ◽  
Near Infrared ◽  
Irradiation Time ◽  
Single Walled Carbon Nanotubes ◽  
Single Walled Carbon ◽  
Carbonaceous Species ◽  
Carbon Impurities ◽  
Walled Carbon Nanotubes

Previously, we demonstrated the selective NIR-mediated ablation of tumor cells in vitro using pristine single-walled carbon nanotubes (SWNTs) with adsorbed tumor-targeting ligands and carboxylated SWNTs with covalently-attached ligands. The covalent approach is advantageous in ensuring that protein ligands remain associated with the NIR-absorbing SWNTs in biological matrices and the noncovalent approach has the advantage of enabling SWNT functionalization without perturbation of the SWNT lattice and photothermal properties. Herein, we compare the ability of moderately-carboxylated (~ 4 at.% carboxylic acid groups) and pristine SWNT materials to absorb 808 nm radiation and convert it to heat. Under conditions of a constant 808 nm laser power density, the approach involved measuring the temperature of aqueous dispersions of protein-coated SWNTs as a function of the irradiation time. Nearly identical temperature profiles were observed for dispersions of moderately-carboxylated and pristine SWNTs possessing matched 808 nm optical densities and equivalent concentrations of carbonaceous species (i.e., SWNTs and amorphous carbon impurities). The results indicate that the amount of carbonaceous species in purified dispersions of protein-coated SWNTs is more important for converting absorbed 808 nm radiation into heat than whether or not the SWNTs were moderately carboxylated, and that moderately-carboxylated SWNTs could be the SWNT-material of choice for the targeted photothermal ablation of tumor cells.

The High Thickness Ni Layer on Single-Walled Carbon Nanotubes Prepared by an Electroless Coating Process

2010 ◽  
Vol 148-149 ◽  
pp. 1607-1610
Author(s):  
Wei Xue Li ◽  
Dun Dong Wang ◽  
Hui Jin ◽  
Jian Feng Dai ◽  
Qing Wang
Keyword(s):  
Carbon Nanotubes ◽  
Single Walled Carbon Nanotubes ◽  
Deposition Process ◽  
X Ray Diffraction ◽  
Electroless Coating ◽  
Single Walled Carbon ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
20 Nm ◽  
Walled Carbon Nanotubes

The Single-walled carbon nanotubes were coated with Ni-P layers by an electroless plating technique. A Ni-P layers are thick and smooth and on individual nanotube with thickness of 20 nm can be obtained after the deposition process. The Single-walled carbon nanotubes were obtained in the suspension of purification solution. The samples have been characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy and energy dispersive spectrometry.The coating layers after heat-treatment convert the amorphous Ni-P coated layers into the nanocrystalline Ni-P layers.

METHODS FOR DISPERSION AND ALIGNMENT OF SINGLE-WALLED CARBON NANOTUBES AND EFFECTS ON THEIR STRUCTURAL AND ELECTRONIC PROPERTIES

2006 ◽  
Vol 05 (04n05) ◽  
pp. 407-411
Author(s):  
JUN JIAO ◽  
LIFENG DONG ◽  
VACHARA CHIRAYOS ◽  
JOCELYN BUSH ◽  
JAMES HEDBERG
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Sodium Dodecyl ◽  
Single Walled Carbon Nanotubes ◽  
Dielectric Medium ◽  
High Yield ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
The Individual ◽  
Walled Carbon Nanotubes

Two effective methods for dispersion and alignment of single-walled carbon nanotubes (SWCNTs) were developed. One is the floating-potential dielectrophoresis (FPD) method, which can achieve the alignment of individual SWCNTs between two electrodes with high yield (more than 30%) and high repeatability. The second is the gas blow method. Using the shear forces associated with a rapidly moving fluid, SWCNTs were positioned in a direction corresponding to the flow vector of the fluid. This technique shows great potential for scaling up the displacement of SWCNTs with controlled orientations. Various dispersion agents including ethanol, dichlorobenzene, sodium dodecyl sulfate (SDS) and DNA were investigated with these two methods. It was found that SDS was the most effective dielectric medium used for FPD dispersion and alignment of SWCNTs. The result of electric measurement for the individual SWCNTs aligned between two electrodes suggests that, using the FPD method, both metallic and semiconducting SWCNTs could be aligned between the electrodes. The individual SWCNT resistances measured range from 20 KΩ to 5 MΩ suggesting a high contact resistance between an aligned SWCNT and metal electrodes. High resolution transmission electron microscopy (TEM) and scanning electron microscopy (SEM) characterization reveal DNA molecules wrapped around the SWNCTs after the dispersion process which may affect the intrinsic properties of SWCNTs.

Functionalization of single-walled carbon nanotubes: Chemistry and characterization

2017 ◽  
Author(s):  
R. Graupner ◽  
F. Hauke
Keyword(s):  
Carbon Nanotubes ◽  
Nir Spectroscopy ◽  
Single Walled Carbon Nanotubes ◽  
Covalent Attachment ◽  
Spectroscopic Techniques ◽  
Force Microscopy ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Tunnelling Microscopy ◽  
Walled Carbon Nanotubes

This article examines the chemical functionalization and structural alteration of single-walled carbon nanotubes (SWCNTs). It describes the covalent functionalization of the SWCNT framework that is the covalent attachment of functional entities onto the CNT scaffold. In particular, it considers the chemical modification and reactivity of SWCNTs in the context of the reactivity of graphite and fullerenes. It also discusses the defect and sidewall functionalization of SWCNTs, along with various techniques used in the characterization ofSWCNTs upon functionalization, namely: thermogravimetric analysis, spectroscopic techniques such as UV-Vis-NIR spectroscopy and Raman spectroscopy, and microscopic techniques like transmission electron microscopy, atomic force microscopy and scanning tunnelling microscopy.

scholarly journals Antimony Selenide Crystals Encapsulated within Single Walled Carbon Nanotubes-A DFT Study

2009 ◽  
Vol 6 (s1) ◽  
pp. S147-S152 ◽  
Author(s):  
Navaratnarajah Kuganathan
Keyword(s):  
Carbon Nanotubes ◽  
Binding Energy ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Single Walled Carbon Nanotubes ◽  
Binding Energies ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Antimony Selenide ◽  
Walled Carbon Nanotubes

The structure and binding energies of antimony selenide crystals encapsulated within single-walled carbon nanotubes are studied using density functional theory. Calculations were performed on the simulated Sb2Se3structure encapsulated within single walled nanotube to investigate the perturbations on the Sb2Se3crystal and tube structure and electronic structure and to estimate the binding energy. The calculated structures are in good agreement with the experimental high resolution transmission electron microscopy images of the Sb2Se3@SWNT. The calculated binding energy shows that larger diameter tube could accommodate the Sb2Se3crystals exothermically. Minimal charge transfer is observed between nanotube and the Sb2Se3crystals.

Sign in / Sign up

Export Citation Format

Share Document