A Study on Low Velocity Impact of Woven Glass/Phenolic Composite Laminates Considering Environmental Effects

2005 ◽  
Vol 297-300 ◽  
pp. 1303-1308 ◽  
Author(s):  
Jae Hoon Kim ◽  
Duck Hoi Kim ◽  
Hu Shik Kim ◽  
Byoung Jun Park
Keyword(s):  
Compressive Strength ◽  
Environmental Effects ◽  
Impact Loading ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Internal Damage ◽  
The Impact ◽  
Phenolic Composite

The objectives of this study are to evaluate the internal damage and compressive residual strength of composite laminate by impact loading. To investigate the environmental effects, as-received and accelerated-aged glass/phenolic laminates are used. UT C-Scan is used to determine the impact damage characteristics and CAI tests are carried out to evaluate quantitatively the reduction of compressive strength by impact loading. The damage modes of the woven glass/phenolic laminates are evaluated. In the case of the accelerated-aged laminates, as aging time increases, initial failure energy and residual compressive strength decrease.

Impact Damage Research of Sandwich Composite Laminates

2013 ◽  
Vol 710 ◽  
pp. 136-141
Author(s):  
Li Jun Wei ◽  
Fang Lue Huang ◽  
Hong Peng Li
Keyword(s):  
Compressive Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Sandwich Composite ◽  
Low Velocity ◽  
Compression Process ◽  
Velocity Impact ◽  
Residual Compressive Strength ◽  
Core Materials

Sandwich composite laminates structure is a classic application of composite material on actual aircraft structural. Dealing with low-velocity impact damage and residual compressive strength of sandwich composite laminates, explicit finite element method of ABAQUS/Explicit software was adopted to simulate low-velocity impact and compression process. Impact response and invalidation on compression between sandwich composite laminates with different core materials and regular composite laminates were compared. The simulation results indicated that softer core materials can absorb more impact energy, reduce the structure damage and enhance the residual compressive strength after impact.

Compressive Strength of CCF300/QY8911 Composite Laminates with LVI Damage

2012 ◽  
Vol 583 ◽  
pp. 203-206
Author(s):  
Hai Ming Hong ◽  
Ming Li ◽  
Jian Yu Zhang ◽  
Yi Ning Zhang
Keyword(s):  
Compressive Strength ◽  
Impact Energy ◽  
Composite Laminates ◽  
Inflection Point ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Damage Area ◽  
Compressive Performance ◽  
The Impact ◽  
Dent Depth

A series of low-velocity impact tests and residual compressive strength tests after impacts on CCF300/QY8911 composite materials were carried out to study the mechanism of compression failure of the laminates after low-velocity impact. The curves of impact energy verse dent depth and impact energy verse the damage area was obtained. And the residual compressive strength and stiffness after impact verse damage parameters were analyzed. The results showed that when the impact energy exceeded the inflection point, as the impact energy increased, the dent depth on the impacted surface of the laminates notably increased while the damage area of the internal layers merely increased slowly. If the impact energy was continued to increase, the expansion of the laminates' internal damage mainly consisted of fiber breaks. The main reason for the decrease in compressive performance of composite laminates was inside delamination between layers, while in the case in which impact energy exceeded the inflection point, there were no obvious changes in delamination damage area for different energy, so the residual compressive performance kept almost stable.

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

Analysis on Low Velocity Impact Damage and Compressive Residual Strength of Composite Laminates

2014 ◽  
Vol 566 ◽  
pp. 463-467
Author(s):  
Pu Xue ◽  
H.H. Chen ◽  
W. Guo
Keyword(s):  
Experimental Data ◽  
Residual Strength ◽  
Composite Laminates ◽  
Damage Mechanics ◽  
Impact Damage ◽  
Numerical Results ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

This paper studies the impact damage under low velocity impact for composite laminates based on a nonlinear progressive damage model. Damage evolution is described by the framework of the continuum damage mechanics. The real impact damage status of composite laminates has been used to analyze the residual compressive strength instead of assumptions on damage area after impact. The validity of the methodologies has been demonstrated by comparing the numerical results with the experimental data available in literature. The delamination area has an error of 11.3%. The errors of residual strength and compressive displacement are 8.9% and 15%, which indicate that the numerical results matched well with the experimental data.

scholarly journals Palliatives for Low Velocity Impact Damage in Composite Laminates

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Mubarak Ali ◽  
S. C. Joshi ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Laminated Composites ◽  
Low Velocity Impact ◽  
Normal Operation ◽  
Fibre Reinforcement ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
The Impact

Fibre reinforced polymer laminated composites are susceptible to impact damage during manufacture, normal operation, maintenance, and/or other stages of their life cycle. Initiation and growth of such damage lead to dramatic loss in the structural integrity and strength of laminates. This damage is generally difficult to detect and repair. This makes it important to find a preventive solution. There has been abundance of research dealing with the impact damage evolution of composite laminates and methods to mitigate and alleviate the damage initiation and growth. This article presents a comprehensive review of different strategies dealing with development of new composite materials investigated by several research groups that can be used to mitigate the low velocity impact damage in laminated composites. Hybrid composites, composites with tough thermoplastic resins, modified matrices, surface modification of fibres, translaminar reinforcements, and interlaminar modifications such as interleaving, short fibre reinforcement, and particle based interlayer are discussed in this article. A critical evaluation of various techniques capable of enhancing impact performance of laminated composites and future directions in this research field are presented in this article.

A damage mechanics model for low-velocity impact damage analysis of composite laminates

2017 ◽  
Vol 121 (1238) ◽  
pp. 515-532 ◽  
Author(s):  
N. Li ◽  
P.H. Chen ◽  
Q. Ye
Keyword(s):  
Composite Laminates ◽  
Damage Mechanics ◽  
Failure Modes ◽  
Impact Damage ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Fracture Plane ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

ABSTRACTA method was developed to predict numerically the damage of composite laminates with multiple plies under low-velocity impact loading. The Puck criterion for 3D stress states was adopted to model the intralaminar damage including matrix cracking and fibre breakage, and to obtain the orientation of the fracture plane due to matrix failure. According to interlaminar delamination mechanism, a new delamination criterion was proposed. The influence of transverse and through-thickness normal stress, interlaminar shear stress and damage conditions of adjacent plies on delamination was considered. In order to predict the impact-induced damage of composite laminates with more plies quickly and efficiently, an approach, which can predict the specific damage of several plies in a single solid element, was proposed by interpolation on the strains of element integration points. Moreover, the proposed model can predict specific failure modes. A good agreement between the predicted delamination shapes and sizes and the experimental results shows correctness of the developed numerical method for predicting low-velocity impact damage on composite laminates.

Impact Damage Behavior of Glass/Epoxy Laminates for Railway Vehicle at Low Temperature

2006 ◽  
Vol 326-328 ◽  
pp. 1793-1796
Author(s):  
Ki Weon Kang ◽  
Seung Yong Yang ◽  
J.H. Kim ◽  
Jung Kyu Kim ◽  
Heung Seob Kim ◽  
...  
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Testing Machine ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Railway Vehicle ◽  
Low Velocity ◽  
Damage Resistance ◽  
Damage Behavior ◽  
The Impact

This paper deals with the damage behavior of glass/epoxy composite laminates subjected to low-velocity impact at various temperatures. For this goal, the impact tests were performed by using an instrumented impact-testing machine at three temperatures: +20°C, -10°C and -40°C. And the resultant damages were inspected through the scanning acoustic microscope (SAM). Also, based on the impact force history and the damage configuration of the laminates, the impact resistance parameters were employed to evaluate damage resistance of glass/epoxy laminates. As results, it was found that the temperature changes affect the damage resistance capacity of glass/epoxy laminates.

Nondestructive Methods for the Damage Assessment of Cylindrically Curved Composite Laminates Subjected to Low-Velocity Impact

2002 ◽  
Author(s):  
Oh-Yang Kwon ◽  
Jung-Kyu Jun ◽  
Yuris A. Dzenis
Keyword(s):  
Composite Laminates ◽  
Damage Assessment ◽  
Impact Damage ◽  
Acoustic Microscopy ◽  
Low Velocity Impact ◽  
Layer By Layer ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact ◽  
Maximum Contact

Curved composite laminates appeared to be more vulnerable than flat ones to rapid transverse loading. Damage induced by low-velocity impact on the cylindrically curved composite laminates has been experimentally investigated. Graphite/epoxy shells with the radius of curvatures of 150 mm showed quite different impact response and damage behavior from that of flat laminate. Under the same impact energy level, the maximum contact force varied with the radius of curvatures, which is directly related to the impact damage. Delamination was distributed rather evenly at each interface along the thickness direction of curved laminates on the contrary to the case of flat laminates, where delamination is typically concentrated at the interfaces away from the impact point. Due to the presence of curvature, the acoustic microscopy could not be directly applied to the layer-by-layer assessment of delamination damage. As an alternative, the penetrant-enhanced X-radiography (PEXR) was introduced and the results from PEXR were compared with those from destructive examination of the cross-section by scanning electron microscopy.

Dent depth visibility versus delamination damage for impact of composite panels by tips of varying radius

2018 ◽  
Vol 52 (19) ◽  
pp. 2691-2705 ◽  
Author(s):  
Mac P Delaney ◽  
Sarah YK Fung ◽  
Hyonny Kim
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Visual Observation ◽  
Small Radius ◽  
Large Area ◽  
Low Velocity ◽  
Internal Damage ◽  
Damage Level ◽  
Visual Evidence ◽  
The Impact

The ability to visually detect damage from impact events is a common concern for carbon/epoxy composite laminates, particularly because composite materials can sustain impact damage in forms such as delamination and backside fiber breakage that is not directly visible at the site of the impact. Therefore, a relationship drawn between the internal damage level and visibility of surface dents would be useful. An experimental investigation is presented on the relationship between visual detectability and the extent of internal damage created by low-velocity impacts. The specimens examined were 8, 16, and 24 ply carbon/epoxy panels impacted by tips of radii: 12.7, 25.4, 50.8, and 76.2 mm. In order to quantitatively describe the visibility of the damage, the depth and span of the surface dents were considered. The results indicate that there are direct relationships between visible and internal damage, but that these relationships are strongly dependent on the radius of the impact tip. Small radius impactors can leave significant visual evidence (i.e. surface dent) without creating internal damage, while the larger radius blunt impactors can create large-area internal delamination without leaving any visual evidence. Therefore, the visual detectability of impact damage is highly dependent upon tip radius, and the level of internal damage cannot be determined based on visual observation alone, especially since in practice, the radius of an impacting object is not always known.

Sign in / Sign up

Export Citation Format

Share Document